Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹12.6 LAccepted-AOC | 1 | Accepted-AOC Lowest bidder | |
| 2 | 2₹16.7 L+₹3.9 L (30.3%)Rejected-AOC | 2 | Rejected-AOC 2 | |
| 3 | 3₹17.4 L+₹4.7 L (36.4%)Rejected-AOC | 3 | Rejected-AOC 3 | |
| 4 | Rejected-Technical 2788 FOURTH FLOOR GALI RAJPUTANA ARYA PURA SABZI MANDI NEW DELHI KAMLA NAGAR NORTH DELHI DELHI 110007 UDYAM DL 01 0057966 | NORTH DELHI | DELHI | 110007 | - | Rejected-Technical Not Admitted due to not uploaded any docs |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
27 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF TUGHLAKABAD
GE AF TUGHLAKABAD SANGAM VIHAR PO NEW DELHI 110080
REPAIR AND CLEANING OF SEWAGE LINE, SEPTIC TANK AND CONNECTED WORKS AT 12BRD, AF STN NAJAFGARH UNDER GE (AF) TUGHLAKABAD
2023_MES_592265_1
GE/TKD-20/2023-24
Open Tender
Civil Works - Others
Item Rate
270 days
GE AF TUGHLAKABAD
MES contractor enlisted having deposited Standing Security with dept. Contractors not enlisted in MES should meet the MES enlistment criteria corresponding to appropriate class and category
9 documents required · 9 mandatory
₹500
GE AF TUGHLAKABAD
₹40,000
Yes
10 Oct 2023
29 Apr 2023
29 May 2023
6 May 2023
27 May 2023
13 May 2023
Amount
M&L for removal of blockage between manhole to manhole lines, gaully trap, floor trap, CI pipe, complete cleaning of manhole sulge of any depth etc of various sizes for sewage line by any means (rodding etc manually) including removing rugs of any type, dirt sludge and silt etc complete upto the entire satisfaction of Engineer-in-Charge. Note : (I) The rates quoted in the above item includes cost of T&P like rods, bamboos, etc complete. (ii) Minimum 2 persons sewer man shall be deployed by contractor and they shall be present on all working days from 0830 hrs to 1700 hrs for maintenance of sewage lines .The persons will be detailed by JE/AGE concerned every morning for attending complaints on daily basis. (iii) Inspection of sewage line and preventive repair/maintenance to be carried out by the contractor in routine without waiting for the complaints from users. The record of the same shall be maintained by the contractor. (iv) The complaint has to be rectified within 08 hrs as given in complaint register, failing which penalty will be imposed @ Rs.100/- per complaint day.
Sewage lines cleaning of size 150mm & over including man holes through chassis mounted Diesel run vehicles mounted hydraulic operated high pressure suction cum getting sewer cleaning machine KAMBI-10 LCHB fitted with imported international standard pumps having 3000 ltrs suction capacity including skilled operator supervising engineer for cleaning/ partial desalting of manholes and sewer line as per guide lines laid in IS-11972 (1987) and cleaning of site complete all as directed by Engineer-in-Charge. Note:- Jetting of sewer line by high pressure betting system of w2200 PSI/Suction.
M&L for dewatering /de-sludging of soakage well of .Dewatering of liquid or semi liquid waste by water sucking hydraulic pressure machine including cleaning of all sludge silt residue of both organic & inorganic nature by manual labour or by mechanical scrappers etc in any position & disposal off all the waste out side defence area. the de-sludging of sewage soakage well is to be carried out up to the bottom slab of sewage sump/sewage/soakage well complete.The sewage well wall & bottom slab to be cleaned by water with high pressure upto entire satisfaction of Engr-in-charge.necessary safety precaution to be adhere during working.Note: The rates included for hydraulic pressure machin of this item.
Demolition and breaking up drain pipes 150mm dia salt glazed stone ware AC or rein forced concrete pipe incl PCC haunching etc set in cement mortar including removal from site complete all as specified and directed by Engr-in-charge
Demolition and breaking up drain pipes 200mm dia salt glazed stone ware AC or rein forced concrete pipe incl PCC haunching etc set in cement mortar including removal from site complete all as specified and directed by Engr-in-charge
Demolition and breaking up drain pipes 300mm dia salt glazed stone ware AC or rein forced concrete pipe incl PCC haunching etc set in cement mortar including removal from site complete all as specified and directed by Engr-in-charge
Excavation in trenches not exc 1.5 m wide and not exc 1.5m depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.
Excavation in trenches exc 1.5m but & n.exc 3.0m depth for foundation, etc. or for shafts, wells, cesspits, manholes, etc. not exc 10 Sqm on plan and not exc 1.5 m depth & getting cut in soft/loose soil complete all as directed by Engineer-in-Charge.
Demolition of brick masonry built in CM complete all as specified and directed by Engr-in-charge.
Demolition of cement concrete in ground floors and pavings etc not exc 15cm thick above or below ground level complete all as specified and directed by Engr-in-charge.
M&L for Cement concrete in foundations, filling and mass concrete type C2 1:4:8 (40mm graded aggregate) complete allas specified and directed by Engr-in-charge.
M&L for brick work with sub class 'B' bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for rendering 15mm thick in cm 1:4 on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement, complete all as specified and directed by Engr-in-Charge.
M&L for Salt glazed stoneware drain pipes 150mm grade ‘A’internal dia laid in trenches and jointed complete all as specified and directed by Engr-in-Charge.
M&L 150mm reinforced conerete pipes,class NP3 and jointed complete with collars complete all as directed by Engineer-in-Charge.
M&L for cement concrete 1:4:8 type D-2 for 150mm bore of pipe as concrete bed to drain pipes including packing under and haunchng against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge
M&L for Salt glazed stoneware drain pipes 200mm grade ‘A’internal dia laid in trenches and jointed complete all as specified and directed by Engr-in-Charge.
M&L 200mm reinforced conerete pipes,class NP3 and jointed complete with collars complete all as directed by Engineer-in-Charge.
M&L for cement concrete 1:4:8 type D-2 for 200mm bore of pipe as concrete bed to drain pipes including packing under and haunchng against the sides of pipes after they are laid and tested complete all as specified and directed by Engr-in-Charge
M&L 300mm reinforced conerete pipes,class NP3 and jointed complete with collars complete all as directed by Engineer-in-Charge.
M & L for PCC 1:3:6 type C2 (using 40 mm graded granite stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 300 mm bore complete all as directed by Engineer-in-Charge.
Removing excavated material n exc 100m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.
Returing, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.
M&L in replacement for pre cast perforated RCC drain cover with frame ( rectangular or square ) the area of each cover Any size any shape and thickness of 60mm each with holes manufactured with M-30 grade of concrete by Vibro Compaction process using accurately designed molds and as suitable reinforced to enable the covers to take load as specified i.e 20 MT for Heavy duty (when tested as per IS-12592) complete all as directed by Engineer-in-Charge.
S&F in repairs of 100 mm bore cast iron drain drain/waste/vent pipes fixed to walls or floor jointed with lead joints incl dismantling of old cast iron drain,waste, vent pipe of any description , jointed with any material complete all as directed by Engineer-in-Charge.
S&F in repairs of Cast iron door bends of 100 mm dia complete all as directed by Engineer-in-Charge.
S&F in repairs of Cast iron branch pieces of 100 mm dia complete all as specified by Engineer-in -Charge .
M&L for removing silt/soil, any description from storm drain of any size complete all as directed by Engineer-in-Charge.
M&L rendering 15mm thick in cm (1:4) on fair faces of brick work or concrete surfaces finished even & smooth without using extra cement incl taking down cement plaster or concrete, brick surface and raking out hacking for key scrubbing down with water to receive plaster complete all as directed by Engineer-in-Charge.
S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor
M&L for non skid coloured ceramic tiles and matching with existing tile 7 to 8mm thick (squar / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and jointed in white/coloured cement to match over and including 15 mm thick backing coat in cement mortar in (1:6), including demolition of floor (terrezo/ PCC/Tiles of any description) incl cement mortar bedding but not backing) and removing the rubbish from the complex complete all as specified and as directed by Engr-in-charge.
M&L PCC 1:3:6 type C2 using 20 mm graded stone agg as in coping complete all as directed by Engineer-in-Charge.
M&L for glazed coloured ceramic tiles (450mmx350mm) x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick cement back coat in CM (1: 4) as on vertical surfaces such as skirting, dados, etc complete all as directed by Engineer-in-Charge.
GIR RAJ BUILDERS
M/S Parshant Associates
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .