ADDN AND ALTN TO JOINERIES AND BATH ROOMS OF ADMINISTRATIVE BUILDING AT ARAKKONAM

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the permises etc., complete all as specified and as directed.

S&F in repair vitreous china squatting pan "ORISSA" pattern size 580 x 440mm white with integral foot rests complete including provn of lime concrete bedding and making good for floor complete all as specified and as directed.

Supply and fix in repair coloured vitreous china wash down water closet pan (pedestal pattern) including Vitreous China valveless,syphonic action type, coloured flushing cistern, 10 litre capacity, low level with inlet, ball valve,float and handle including bracket, flush pipe of polyethylene of low or high density of PVC 32 mm dia,for low level cisterns and Plastic water closet seat,black,closed pattern with flat bottom,and cover and mild steel chromium plated or aluminised hinging device including jet spray complete all as specified

M&L Vitreous china wash hand basin, white, flat back of size 630 x 450mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, as in repairs, complete all as specified and as directed.

S&F in repair Vitreous China Urinal, Half stall type, white white (minimum), with grating and union for discharge pipe (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement fixing with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap,flush pipe and waste pipe)

S&F in repair Vitreous china urinal partition white of size 310x700 mm terminating about 40cm above floor line complete all as specified and as directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity with float ball valve and bracket including fixing of flush pipe & 15mm dia PVC connector pipe 450mm long with two nos fly nuts complete all as specified and as directed.

S&F Glass shelf assembly for soap tray embedded in the wall complete all as specified and as directed.

S&F in repair Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges etc. With pair of brackets complete all as specified and as directed.

S & F in repairs for 15mm dia fancy type chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repairs for 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and as directed.

S & F in repairs for 15mm dia fancy type chromium plated Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per ecification & drawing

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F 100 mm size butt hinges of Stainless steel medium weight with mild steel hinge pin complete all as specified and as directed.

S&F 200 mm size Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 150 mm size Aluminium handles, cast type, anodised complete all as specified and as directed.

M&L for applying two coats of white wash on old ceiling including preparation of surface complete all as specified and as directed.

M&L for applying two coats of white wash on old wall including preparation of surface complete all as specified and as directed.

Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed.

Supply and fix powder coated anodised sliding/hung type aluminium door, window and ventilator shutters (minimum thickness of powder coating 50 micron), without sash, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 No), hinges type B-21 100 mm long (2Nos) suitable handle (1 No), aluminium tower bolt 100 mm (1No) etc. complete all as specified and as directed

S&F 5.5 mm thick sheet glass ordinary quality and glazing sheet glass is ground or obscured or frosted, on one side with rubber beading, exc. 0.5 Sqm each pane complete all as specified and as directed.

S&F 100mm Rim latch with two levers, of aluminium alloy anodised body. stove enamelled finish; with brass knob or lever handle and fixed complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) exc 1.50 sqm but not exc 4 sqm each & removing from site complete all as specified and as directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) n exc 1.50 sqm each & removing from site complete all as specified and as directed.

Material and labour for joint free non skid ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per Item No. 27 above but as in vertical surfaces such as wall, skirting and ado etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing in cement sand mortar 1:3 complete as specified and directed.

S & F of 75 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe including taking down old unserviceable pipes with all fittings complete all as specified and as directed.

S & F of 110 mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls including clamps for securing pipe including taking down old unserviceable pipes with all fittings complete all as specified and as directed.

S & F 110 mm bore PVC (SWR) 'P’ trap complete all as specified and as directed.

Material and labour for light shade vitrified ceramic coloured tiles10mm thick (square/ rectangular) polished area of each tile n.exc 0.36 sqm in floors etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per item 32 here-in-before but on vertical surfaces over 10mm thick screed plaster in CM 1:3 complete all as specified and as directed.

S&F for mild steel framed work such as grills etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars and similar work conforming to Fe-290. Gde E-165 complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not other wise described and applying two coats of synthetic enamel painting over a coat of red oxide zinc chreome primer complete all as specified and as directed.

Supply and fixing powder coated aluminium grill of 6mm thick with aperture size of 76.20mm 'F'/'U' type channel for windows complete all as specified and as directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) and disposal complete all as specified and as directed.

Taking up or down steel tubing and connections of 15 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections of 20 mm dia complete all as specified and directed.

Taking up or down steel tubing and connections of 25 mm dia complete all as specified and directed.

S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia including cutting /chasing in walls etc.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 20mm bore including cutting /chasing in walls etc.

S&F tubes medium grade galvanized with all fittings and fixed to walls or laid in floors of 25mm bore including cutting /chasing in walls etc.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for as in sunken floor and removal & rubbish of premises exc 500 m but n exc 1.5 km complete all as specified

M&L for 15 mm thick rendering on concrete surfaces in CM 1:3 with integral water proofing compound @ 3% by weight of cement (Note: Water Proofing compound will be measured and paid separately ) both on floor and walls complete all as specified and as directed.

Supply only integral water proofing compound all as specified

M&L for applying high performance two component flexible acrylic Polymer cementitious waterproofing coating by two coats of Bostik Boscolastic using 2kg/sqm in two coats after cleaning of surface and treating all surface cracks filled with Bostik Flowfill grout, all surface patchwork defects with high early strength Bostik Patch fix concrete, sealing bore packing joint with Bostik Flowfill Grout all complete as per manufacturers specifications.

M&L PCC 1:5:10 type ,E2 (using 40 mm graded stone aggregate) as in sunken floor filling complete all as specified and as directed

Supply and fix powder coated anodised aluminium frame(100/40 mm) for Partitions with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and as directed

S & F 19 mm thick prelaminated particle board Interior grade pre laminated both sides with decorative choice laminations fixed in partition on aluminium frame work complete all as specified and as directed.

S & F 6 mm thick teak wood lipping to Particle board complete all as specified and as directed

S & F Slide Anti rust treated Telescopic Ball bearing Drawer Channel (450mm), locking arrangements Etc.. for cupboard complete all as specified and directed

S & F ,Magnetic White sheets/boards for Side board complete all as specified and as directed

S & F Fabric Sheet/material for partition board complete all as specified and as directed

Supply and fix health faucet (hand shower) with 1.0metre long tube with wall hook, chromium plated as per Cat No.BEA-41 of Prayag or Cat No.ALD-563 of Jaquar or O0426C of HR Johnson or T9961A1 of Parryware or equivalent of KOHLER / MARC complete all as specified and as directed.

S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S & F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and as directed.

S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in Walls complete all as specified and as directed.

S & F PVC (SWR) bends 110 mm complete all as specified and as directed.

S & F PVC (SWR) bends with access door 110 mm

S & F PVC (SWR) bends 75 mm complete all as specified and as directed.

S & F PVC (SWR) bends with access door 75 mm complete all as specified and as directed.

S & F PVC (SWR) 75 mm Floor trap, plain with stainless steel grating including jointing with solvent cement complete all as specified and as directed.

S & F PVC (SWR) 75 mm multi Floor trap, plain with stainless steel grating including jointing with solvent cement complete all as specified and as directed.

Taking down copper/aluminium point wiring (light,fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of wall, floors, etc. all as specified and as directed.

Material and labour point wiring with 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor drawn into including PVC concealed (fixed on wall/roof/ceiling etc), conduit of size not less than 20 mm dia and including provision of 1.5 Sqmm single core PVC insulated FRLS unsheathed multi stranded copper conductor as earth wire and cast iron / pressed steel treminal boxes for mounting switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover complete for the following :- Make for PVC conduit : SUDHAKAR / AVON PLAST /FINOLEX . Make for Copper cable: Polycab/ Plaza/Havells .

One light point controlled by one switch.

One fan point / Exhaust fan point controlled by one switch.

All as per item ser no-67 above here in before but one 3 pin socket outlet 5/15 Amps, indipendent board with cables 4.0 Sqmm size. Make :- Polycab/Finolex/Plaza

S&F in repair for switch piano, flush type single pole , one way 5 amp complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F in repair for switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and as directed. Make: Anchor/Cona/Leader

S&F in repair for ceiling rose three terminals/ PVC/ polycarbonate, isolated body complete all as specified and as directed. Make: Anchor/Cona/Leader

Supply and fix high efficiency wall mounted LED batten type not less than18W/ 20 W 4 ft LED light fitting and including taking down old unserviceable fittings all as specified and as directed. . Make :Crompton Cat Part No :LCTLN-20-CDL or equivalent model of Philips/Surya Cat No. SLE BTN T8 20 W /wipro.

Supply and fix high efficiency wall mounted LED batten type not less than 9/ 10 W 2 ft LED light fitting and including taking down old unserviceable fittings all as specified and as directed. . Make :Crompton Cat Part No :LCTLN-10-CDL or equivalent model of Philips/Surya Cat No. SLE BTN T8 10 W/wipro.

S&F Heavy duty exhaust fan with louvers, 300mm sweep , AC 1400 rpm single phase , 230 V including fixing arrangements such as bolts and nuts etc and making good the disturbed surface with proper rounf shape as per site requirement complete all as specified and as directed. Make: Anchor/Cona/Leader

M&L for sub main wiring for phase and neutral with PVC FRLS insulated unsheathed multi stranded along with earth wire FRLS PVC insulted copper conductor, single core cable in and including surface/concealed /PVC conduit of appropriate size as specified for the following sizes. Note:- : 1. Cutting chases for concealed wiring shall be measured and paid seperately. 2. Rates are including taking down old unserviceable. 3.Three runs of wire and one run of PVC Conduit will be measured as on RM unit .

2x 4.0 sqmm and 1x 4.0 sqmm as earth wire

2x 6.0 sqmm and 1x 6.0 sqmm as earth wire

Supply and fix 230 V, 1200mm sweep ceiling fan smart saver-50 of Orient or equivalent of Crompton/Bajaj/Usha

S& F for sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one SP MCB 20-32 Amps. Make: Legrand/ Siemens/Scheneider/ABB

S&F sheet metal enclosure vertical TPN MCCB DB 12 way double door with spreader terminals,insulating phase barrier and hardware with neccesary arrangements all as specified and directed Note :-(i) Including taking down old u/s DB, MCCB and MCB's (ii) MCCB and MCBs shall be measured and paid separetly under the respective item of shedule.Make: Legrand/ Siemens/Scheneider/ABB.

Supply and fix for MCCB 4 Pole, 415 V, adjustable Thermal & Fixed Magnetic setting type type 200 Amps with breaking capacity 25 KA complete all as specified and as directed. .Make: Legrand/ Siemens/Scheneider/ABB,Note : Including taking down old unserviceable.

Supply and fix for MCB SP 230 V, 6-32 Amps with breaking capacity 10KA C curve complete all as specified and as directed. Make: Legrand/ Siemens/Scheneider/ABB Note : Including taking down old unserviceable.

SIVA ENTERPRISES

D.KUMAR

R.P.TRADERS

SREE BALAJI ENTERPRISES

SRI VIGNESH BUILDERS

RD ENTERPRISES

N SRINIVASAN