Renovation of DIET Building at Kavaratti

Amount

Demolishing brick work, manually/ by mechanical means including stacking of serviceable materials and disposal of unserviceable materials within 50mtr lead as per the direction of Engineer incharge.

Demolishing R.C.C. work, including stacking of steel bars and disposal of unserviceable materials within 50mtrs lead as per direction of Engineer-in-charge.

Dismantling tile work in floors and roofs laid in cement mortar including stacking materials within 50mtr lead for thickness of tiles above 10mm and upto 25mm.

Demolishing cement concrete manualy/by mechanically means including stacking of serviceable materials and disposal of unserviceable materials within 50mtr lead.

Taking out doors of windows and clerestory window shutter(steel or wooden)including stacking within 50mtr lead of area 3sqm and below

Repair to plaster of thickness 12mm to 20mm in patches of area 2.5sqm and under including cutting the patch in proper shape,raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground with 50 Mtr lead

P/L Cement concrete 1:5:10(1cement,5M.Sand,10G.chipps)

Earth work excavation in foundation trenches or drains not exceeding 1.5m in width or 10 sq.m on plan including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 Mtr

Providing and laying cement concrete 1:4:8 (1 cement 4 M-sand 8 granite chips ) for foundation and plinth

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, shelves chajjas, lintel, bands, plain window sills, staircase and spiral staircase .. up to floor five level excluding cost of centring,shuttering and reinforcement. 1:1.5:3 (1 Cement 1.5 M Sand 3 Granite Chips) 20 mm nominal size

Cold twisted steel reinforcement for R.C.C work including bending, binding and placing in position complete.

Centering and shuttering including strutting propping etc and removal of form work,Lintel,beams,girder,bressummers and cantilivers.

Cement concrete block (machine moulded)masonry in Foundation and plinth in CM 1:6 with blocks of size 40cmx20cmx15cm.

Cement concrete block (machine moulded)masonry in Superstructure above plinth level in CM 1:6 with blocks of size 40cmx20cmx15cm.

6mm thick cement plaster to ceiling in cement mortar 1:3 (1cement,3M.Sand)

12mm cement plaster 1:6(1cement 6M.Sand)on the out side

15mm cement plaster 1:6(1cement 6M.Sand)on the out side

Providing and laying Vitrified floor tiles in different sizes(thickness to be specified by the manuafacture) with water absorbtion less than 0.08% and conforming to IS:15622 of approved make in all colours and shade laid on 20mm thick cement mortar 1:4(1cement,4M.Sand) including grouting the joints with white cement and matching pigments etc.complete.size of tiles 800x800mm

Providing and laying Vitrified in differen size (thickness to be specified by the manuafacture)with water absorbtion less than 0.08% and conforming to IS:15622 of approved make in all colours and shade in skirting,riser of steps over 12mm thick bed of cement mortar 1:3 (1Cement 3M.Sand)including grouting the joints with white cement and matching pigments etc.complete.size of tiles 800x800mm

Providing and laying ceramic glazed floor tiles of size 300x300mm (thickness to be specified by the manufacture)of first quality confirming to IS:15622 of approved make,in colours such as white,Ivory,Grey,fume red brown laid on 20mm thick cement mortar 1:4(1cement,4M.Sand) and joining with white cement and making pigment.

Providing and laying ceramic glazed wall tiles (thickness to be specified by the manufacture)of first quality confirming to IS:15622 of approved make,in skirting,riser of steps and dado.colours such as white,Ivory,Grey,fume red brown laid on 20mm thick cement mortar 1:4(1cement,4M.Sand) and joining with white cement and making pigment.

Providing and applying wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.including removing white or clour wash by scrapping wherever required.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufactures specifications two or more coats applied on walls @1.25ltr/10 sqm) over including priming coat of special primer applied @ 0.75 ltr/10 sqm

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note:- Butt hinges and necessary screws shall be paid separately). Second class teak wood ,30 mm thick shutters

Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows.

Providing 40x5 mm iron hold fast 40cm long including fixing to frames with 10 mm dia bolts, nuts, wooden plugs and embedding in cement concrete block of size 30x10x15 cm of mix 1:3:6 ( 1 cement, 3 M sand 6 graded stone aggregate of 20mm nominal size)

Providing and fixing brass tower bolt (barral type) with necessary screws etc complete.(a)100 x 10mm

Providing and fixing brass handle with necessary screws etc complete. 75mm

Providing and fixing Bright finished brass casement stay with necessary fittings and screws 200 mm weighing not less than 240gms

Providing and fixing 24 mm thick factory made PVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm ± 0.2 mm with inbuiltedging on both sides. The styles and rails mitred and joined at the corners by

Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door

Painting wood work with Delux Multi Surface paint to give an even shade. Two or more coats applied on @ 0.90ltr/10sqm) over under coat of primer applied @ 0.75 ltr/10 sqm of approved and manufacture

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes &fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,)20mm nominal bore

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External work).

(a)25mm nominal bore

(b)32mm nominal bore

Providing and fixing CP brass bibcock of approved quality and manufacture complete. 15mm nominal bore

Providing and fixing CP brass stopcock of approved quality and manufacture complete.15mm nominal bore

Providing and fixing CP brass angle cock of approved quality and manufacture complete.15 mm (Cera,Jaquar,Parryware)

Providing and fixing white vitrous China water closet Pedestal pan (European) type WC pans with white plastic seat and lid and rubber buffers, 15 white vitrous China low level flushing system of approved make with fittings and brackets 40mm flush bend, 20mm over flow pipe with complete including cutting and making good the walls and floors where required.(Cera,Jaquar,Parryware)

Providing anf fixing white vitrous China wash basin with RS or CI brackets painted white, 15mm C.P bras pillar tap and C.P brass chain and rubber plug 32mm C,P. brass waste of standrad pattern 32mm diametre and waste pipe complete including cutting and making good the walls and floors where required. white vitrous china flat back wash basin 550x400mm with one 15mm C.P brass piller tap (Cera,Jaquar,Parryware)

Providing anf fixing 600x450mm mirror of superior glass (approved quality) complete with 6mm thick asbestose sheet ground fixed to wooden cleats with necessary screws and washers.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing and fixing C.P. shower rose with 15 to 20mm intlet, 100 mm dia.

Providing and fixing health faucet of approved quality and manufacture complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.

Providing and fixing nominal guage PVC Pipe of approved quality compleate with special flang compression type fitting s including trenching and refilling etc. External work (6kg/cm2)

(a)110 mm nominal bore ( 6 kg/sqcms)

(b)63mm nominal bore ( 6 kg/sqcms)

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors: 100 mm inlet and 100 mm outlet Sand cast iron S&S as per IS: 3989.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Powder coated aluminium (minimum thickness of powder coating 50 micron

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin- charge.Pre-laminated particle board with decorative lamination on both sides

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work(Two or more coat applied @1.67lit/10sqm))

Painting with synthetic enamel paint of approved approved brand and manufacture of required colour to give an even shade One or more coats on old work

irshad

MOHAMMED MP

SAMEER RIYAS

AYSHA ENTERPRISES

Abdul Shukoor Mekkara

Shihabudheen T P