Construction of Mini Secretariat at Ballabgarh in Faridabad District (Pdg. 500 KVA Oil Type Transformer).

Amount

SAFETY ITEMS Supply & Erection of mild steel bucket stand suitable for 6 nos. fire buckets, (but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect upto the entire satisfaction Engineer in charge of the work (size 6'x4' made of GI pipe 32 mm dia)

Earthing and lightening arrestor Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required

Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required

Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode

Supplying and laying 25 mm x 3 mm G.I. strip in 40 mm dia, GI pipe as / from earth electrode including soldering etc. as required

Providing and fixing 25 mm x 3 mm G.I. strip on surface or in recess for connections etc. as required with all labour and material

Providing and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe form earth electrode as required.

Providing and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material

HT CABLE Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required 70 to 120 sqmm

Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 to 120 sqmm

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 145/123 mm outer dia/ inner dia

RCC FOUNDATIONS FOR D.G. SET Providing RCC foundation of M20 grade (1 cement :1.5 store aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50 mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-Charge. 500 KVA DG set (1 no. foundation is for 500 KVA oil type transformer)

Supply and erection of underground cable in pipe /existing open/closed trench complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work 185 Sq. mm 3.5 Core Cable .

240 Sq. mm 3.5 Core Cable .

Supply & erection of lightning arrestor of W.S./ G.E. make SDU suitable for 11KV 3 Phase 50cycle grounded neutral system comprising of spark gap type quench gap types in series with non-liner register element housed in horizontal seals porcelain bushing with line ground terminal alongwith mounting clamp conforming to ISS-3070 part-II of 1985 with latest amendments with all labour and material required up to the entire satisfaction of Engineer -in-charge of work

Supply & erection of fire extinguishers ISI mark( CO2 type 4.5 kg. Capacity as per IS:7285 duly erected/ hang on wall with hooks with all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work. Make Safex, AJAY

Supply and erection of 11 K.V gang operated switch Jayshree make conforming to IS and latest amendment including suitable size of copper blade erection of same on existing H-pole with the help of 3 Nos. Channels of size 75x 40 x 6 mm thick 1.8 M long fixed with suitable size of M.S. Clamp, nuts and bolts including cost of 6 Nos 11K.V. Pin insulator with G.I. Pin, RD Fuses and painting with 2 coat of approved paint and one coat of red oxide including all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work.

Supply and erection of stay wire suitable for 9M long PCC pole made out of 7/3 SWG GI wire with U type M.S. Rod 5/8" dia duly threaded by means of angle iron of size 50 x 50 x 6 mm x 30 cm 6 feet long M.S. Rod buried in ground after fixing with cross channel size 75 x 40 x 6 mm x 60 cm long the stay wire will be binded on the top of the pole with help of suitable size of double U type M.S. Clamps and stay fixed with nuts and bolts the stay wire shall be insulated in the middle point with the help of egg insulator including all labour and material required to complete the job in all respect to the entire satisfaction of Engineer-in-charge of work.

Supply and erection of fire bucket of G.I. sheet of 24 gauge write with " FIRE" as per fire specification.

Supply and erection of Rubber Mat 1mx2mmx 3mm thick suitable for 11/33 KVA as per IS No. 15652C/M/L 3017739 as per approved by Chief Electrical inspector, Govt. of Haryana.

S/E of 11KV disc insulator (jayshree make) with pin with labour and material required to complete the job including fixing the same on existing chanel complete in all respect

S/E of M.S. chanel, MS angle, MS flat & nuts & bolts of required size including painting and cutting etc. with labour and material required to complete the job including fixing the same on existing pole complete in all respect

Supply & installation of MS Shade of Dimensions 15 (L) x 12 (W) (H) feet tom be covered by 2mm thick meter sheet (approx. area to be covered 220 sq. feet) including 5 mm ms parking jali having approximate area of 700 sq. ft. metro sheet to be supported by MS pipe of dimension (50x75x3mm) having approximate length of 240 feet and MS angle of size 60x6mm having approximate length of 200 feet complete upto the entire satisfaction of the Engineer-in- charge as per specification.

Supply and erection of XLPE (E) 11 kv HT aluminium conductor armoured cable 1 P.mtr. below ground level with sand & bricks with all labour and material including digging and refilling of trench with all labour and material as required complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work 70 Sq. mm 3 Core Cable .

Supply and erection of XLPE 11 or 33 kv HT aluminium conductor armoured cable ISI mark laid on surface/pipe/cable tray with all labour and material as required complete with necessary connections complete in all respect upto the entire satisfaction of Engineer in charge of the work 70 Sq. mm 3 Core Cable .

Supply of prestressed cement PCC pole as per IS -1678-1960. 9 mtr. Long 105 mm x115mm top and 105mm x315 mm bottom with working load of 200 KG buried 1.80 mtr. Ground.

Supply, installation, testing and commissioning of 500KVA 11kV/433 Volts oil cooled transformer with OLTC +5% to - 15% steps of 1.25% with HV/LV cable box as per IS 1180 (Energy Efficiency level 2) Make : Crompton, NGEF, Voltamp as under :- other specifications as per DNIT in PDF.

Supply, installation, testing and commissioning of HT panel 1 way RMU type V+M outdoor type Make ABB/Siemens/ Schneider complete upto the entire satisfaction of the Engineer - in - Charge as per specification as under :- VACCUM CIRCUIT BREAKER other specifications as per DNIT in PDF.

Supply, installation, testing and commissioning of APFC panel complete upto the entire satisfaction of the Engineer - in - Charge as per specification as under :- APFC PANEL (150KVAR) other specifications as per DNIT in PDF.

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA sheet, dead-front construction, dust and vermin proof, indoor type TPN Panels with hinged lockable doors fabricated from 2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with separate cable alley and lockable bus-bar chamber including supplying and fixing following switchgears and accessories, inter-connections, bonding to earth, powder coated painting as per following specifications :- Incomer 800 Amps 433V 4P 50Hz 50KA Fixed Manual Type Air Circuit Breaker (ACB) with Microprocessor based release for Overload , Short-circuit and Earth Fault protection (Make: ABB /Siemens/ Schneider/ L&T)= 1 no. other specifications as per DNIT in PDF.

Supply & erection, Commissioning and testing of 11 KV indoor HT metering panel complete with Ct's PT's cubical & electronics meter with accuracy class 0.5. as par requirement / approved by DHBVN consisting of the followings : Cubical panel box standing floor mounting type made out of sheet steel 14 SWG CRCA sheet with channel iron base frame, spray painted with strong synthetic light grey enemal paint as per size and design approved by DHBVN. other specifications as per DNIT in PDF.