Supply repairing of isolation valves, pies, pump cable s in the pump house of PG Department of Paediatric at MKCG, MC and Hospital at Berhampur. BUILDING

Supply, laying testing and commissioning of LT. AI. XLPE armoured /unarmoured cable confirming to 15: 7098 Part II as per the description given below: (Note: Qty may vary +/- 15% as per actual work at site) Make-Havels/Polycab/Kei.3.5 C x 95 sq.mm

3.5 C x 35 Sqmm.

Supply, laying testing and commissioning of L.T. Cu. XLPE armoured /unarmoured cable confirming to IS: 7098 Part Il as per the description given below: (Note: Qty may vary +/- 15% as per actual work at site) Make-Havels/Polycab/Kei.10C x 1.5 Sqmm.

Supply, fixing, connection, testing and commissioning of double compression brass cable glands and crimping type, lugs / sockets with necessary tools and equipments as specified in specifications and 15. The glands and lugs / sockets shall be suitable for cable size and type mentioned above. The job also includes, if necessary, supply and fixing of extension busbar of same material on circuit breaker / FSU or panel board terminal/connector to connect more than one no. of parallel cables or to connect higher size cable to lower size unit. The job also includes earthing the glands and armour of the cable with common earth bar or flexible copper mesh.3.5C x 95sq.mm

3.5 C x 35 Sqmm.

10C x 1.5 Sqmm.

Providing and fixing Power wiring with 2 core x 1.5 sq.mm. PVC armoured copper cable for wiring pressure switches, etc. Including all required material and labour, terminations, etc. Complete.Make-Havels/Polycab/Kei.

Supplying, installation testing and commissioning of the following 'C' class MS Pipe as per IS:1239 for over ground pipes with flanged/ welded and with heavy clamps, hangers, brackets or pipe supports (all with flanged/welded joints) as required including pipe of shorter lengths, tapering connecting pieces, short or long bends, MS specials like sockets, union nuts, elbows, reducers, plugs, Tees, bends, etc. Complete to make the system operative as required by LFA/TAC authorities the pipes will have to be laid and fixed in trenches on walls, ceilings, into brick walls or RCC with lead anchor fastners. The work includes excavation in all types of soils and back filling and making holes in brick or RCC walls, slabs/ roofs and making good the damages by bringing to the original condition to the satisfaction of the Architect and painting two coats of approved shade(Post office red) of enamel paint over a coat of approved primer for overheads pipes.Make-Tata/Jindal/Sail.150mm

NRV conforming to IS 5312 (swing type) or to API 594/598 (dual plate check type) with Cl body & brass trim part, PN 1.6 having necessary companion flanges, CS hardwares. Gaskets, arrow indicating direction of flow, etc. complete. It shall be ISI Marked.Make-Zoloto/Audco/Leader.Size: 150 mm

Size: 80 mm

Supply, installation testing and commissioning pressure switch assembly with interlocking of pumps.Make-Indfos/Grandfos.Pressure Switch

100 mm dial Pressure gauge with Syphon tubing, isolation valve & mounting accessories complete Range: 0 10 kg/sq.cm.Pressure Gauge: 0-10 kg/sq.cm.Make-H GURU/G GURU.

Ball valve of 15 mm dia

Supply and installation, testing and commissioning of double flanged Isolation Sluice valves conforming to IS 14846 tested to ISI marked, PN 1.6 with Cl body, bonnet & brass trim parts, & having necessary companion flanges, bolts, nuts, gasket packing, support and any other spares, including indicator for open and shut position.Make-Zoloto/Audco/Leader.Size: 150 mm

Repairing and freewheeling of all isolation valves in pump house

Size: 80 mm

Colouring of tal pump house pipe line with PO red and red oxide primer.