Vikas Khand Vishunpura ke Gram Sabha Dumari me Manshathapur Dumari Pitch Sadak se Shyam Murli Manohar Mishra ji ke ghar hote hue Amrendra Mishra ke ghar tak Dammer Sadak ka nirman karya.

Providing, laying, spreading and compacting stone aggregates G-III of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate watering and compacting to the required density grading 3 as per technical specification clause 405

Providing & applying prime coat with Bitumen Emulsion SS-1 on prepared surface of granular base including cleaning of road surface and spraying primer @0.85 kg sqm using mechanical means as per tech.Spec.cla- 502(I)

Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the primed surface of granular base treated with primer and cleaned with Hydraulic broom as per Technical Specification Clause 503.

Providing, laying and rolling of open graded Premix Carpet of 20mm thick Composed 13.2mm to 5.6mm agg. Either using Penentration grade bitumin/CRMB on [email protected] k.g. per sqm to required line, grade and level to serve as wearing course on a previously prepared baseby manual MORD Specifications-508

Providing and laying seal coat by manual means with VG-10 Grade bitumin sealing the voids in bituminous surface laid to the specified levels, grade and cross fall using Type C, as per technical specifi. Cl. 510

Brick edging on both side of the road of lass 150 brick 7.5 cm wide 11.5 cm deep laid with mud mortar including labour and suppy of bricks finished to required template and proper alignment and also including dessing and ramming the excavated erarth as directed by E/I.

Construction of Subgrade and Earthen Shoulder with approved soil with all lifts and leads, laying in layers, breaking clods, dressing to required lines, curves, grade and sections, watering and compaction to meet at least 100 % procter density complete to specification requirements(For Shoulder Work)

Supply and fixing of sign board including supply and cost of all materils labours T & P etc. required templet as directed by the Engineer In charge.

Please Enable Macros to View BoQ information