Loading
Loading…
Loading…
Tender Value
₹6.8 L
EMD Value
₹13,600
Closing Date
22 Jun 2026, 5:00 pm5d left
Executive Engineer
HPSIDC Shimla
Construction of pre-painted steel over existing Boxing Ring
2026_SIDC_136396_1
Job No. 7
Open Tender
Civil Works
60 days
Una
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹13,600
12 Jun 2026
12 Jun 2026
23 Jun 2026
12 Jun 2026
22 Jun 2026
12 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in earth work in all heights and depth in all kinds of soils, including saturated soil comprising of pick work, jumper work, and blasting work both in soft and hard rock with chiselling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the Engineer -in-Charge at site. according to the HP.PWD. specification | 4.05 | Cum. | - | - |
| 2 | Providing and laying cement concrete 1:4:8 (1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete including cost of form work in:Foundation and plinth and wall including carriage of materials upto all leads and lifts. | 7.51 | Cum. | - | - |
| 3 | Providing form work with steel plates 3.15 mm( three decimal fifteen millimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in including carriage of materials upto all leads and lifts. Foundations, footings & bases of columns etc., Pedestal of columns and mass concrete. | 15.6 | Sqm. | - | - |
| 4 | Providing and laying cement concrete 1:2:4 (One cement : two sand :four graded crushed stone aggregate 20mm nominal size)( Twenty milimetre) and curing complete, mixing the material in mechanical mixture and compacting the concrete with viberator complete excluding cost of form work and reinforcement for reinforced concrete workFoundations, footings, bases of columns and the like and mass concrete. including carriage of materials upto all leads and lifts. | 3.07 | Cum. | - | - |
| 5 | Providing and laying tor steel reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge . | 429.8 | K.g. | - | - |
| 6 | Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters:- With white enamel paint.or other than white including carriage of materials upto all leads and lifts and as per the direction of Engineer-in-Charge. | 36 | Sqm. | - | - |
| 7 | Steel work welded in built up sections,trusses and framed work,including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paintIn gratings framed guard bars,ladders,railling,brackets and similar works.including carriage of materials upto all leads and lifts. | 3,892.78 | Kg. | - | - |
| 8 | Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c using self drilling/ self tapping screws complete complete with all accesoriees as required as per the direction of Engineer-in-charge including carriage of materials upto all leads and lifts | 82.26 | Sqm. | - | - |
| 9 | Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :Ridges/flushing plain (500 - 600mm) | 26 | Rmt. | - | - |
| 10 | Providing and fixing prepainted steel Liner sheet for ceiling 0.37 mm thickness, using self drilling/ self tapping screws complete with all accesoriees including carriage of materials upto all leads and lifts. | 77.28 | Sqm. | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.06 MB
Agreement.pdf
Tender Documents • 1.54 MB
BOQ_201881.xls
BOQ • 0.39 MB
condition.pdf
Tender Documents • 2.10 MB
Download all tender documents and submit your bid