REPAIR/REPLACEMENT/IMPROVEMENT OF SOLAR WATER HEATER, ELECTRIC STORAGE WATER HEATER, ENERGY METER, RENEWAL OF EARTHING AND INTERNAL WIRING AT CERTAIN UNITS UNDER AGE E/M OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Servicing and maintance of Solar water heater plant of Cap 100/150/200/300 ltrs installed at single/duoble/triple story bldgs for carrying out minor leakage, cleaning of flat plate collector glass, cleaning of water tank and make up tank including dismantling inlet and out let connections and refixing the same after cleaning for proper functioning to maintain proper water temperature all as specified and directed.

S&F in replacement flat plate collector size 1860 mm x 1240mm x 90 mm ISI marked and as per site requirement assembly suitable for solar water system existing size and capacity with copper tube black coat/radiation reflector film of aluminium toughed glass, complete all as specified and directed. Make Inter Solar system (P) Ltd/TATA BP Solar/Kotak urja pvt ltd.

S&F in replacement solar toughened glass plate suitable for collector plate of size 1860 mm x 1240mm x 90 mm ISI marked complete all as specified and directed. Make Inter Solar system (P) Ltd/TATA BP Solar/Kotak urja pvt ltd

S&F nytryl rubber suitable for Solar water heater plant of Cap 100/200/300 ltrs Solar water heater plant complete all as specified

S&F Aluminium sheet suitable for Solar water heater plant of Cap 100/200/300 ltrs complete all as specified

M&L for fixing in replacement Solar water heating element for geysers 3 KW, 230 volts AC any type ISI marked complete with rubber gasket including replacing the bolts/screw if any broken during changing the heating elements, complete all as specified and directed Make : victor/suraksha/sunflame/Kotak

S&F in replacement temperature gauge steam type range 25 to 90 degree centigrade as per existing size complete all as specified.

M&L for disconnecting of hot water, cold water system complete and removing leakage of hot water MS tank by welding n. exc 2.5cm length (any Nos) to tank refixing the same complete in all respect and testing of solar water heater for capacity upto 1000 ltrs complete all as specified and directed.

M&L for replacement of insulator water tank made out of 1.25mm thick MS sheet with provision of 15mm dia inlet/outlet arrangement for solar water heater capacity 100 ltrs complete all as specified and directed. Make:- Inter Solar system (P) Ltd/TATA BP Solar.

M&L for replacement of insulator water tank made out of 1.25mm thick MS sheet with provision of 15mm dia inlet/outlet arrangement for solar water heater capacity 200 ltrs complete all as specified and directed. Make:- Inter Solar system (P) Ltd/TATA BP Solar.

M&L for replacement of rubber hose pipe 22 to 25mm dia between hot water tank & collector complete all as specified .and directed Make FINOLEX/SUPREME.

S&F in replacement top cover suitable for HDPE tank cap 100 to 500 ltrs complete all as specified and directed.

S&F 200 ltrs ISI marked, HDPE rotational moulded polyethlene cylindrical vertical water storage tanks conforming to specification of IS:12701-1996 with amendment No 1 covered by fig 1) hoisted and fixed in position, including disconnecting old tank, complete all as specified. Make : Syntex/Polycon/Fusion.

S&F 300 ltrs ISI marked, HDPE rotational moulded polyethlene cylindrical vertical water storage tanks conforming to specification of IS:12701-1996 with amendment No 1 covered by fig 1) hoisted and fixed in position, including disconnecting old tank, complete all as specified. Make : Sintex/Polycon/Fusion.

S&F cross arms, bracings supports, clamps and back plates fabricated from structural steel sections including nuts bolts, washers, welding bending cold or hot,drilling holes for bolts in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint all as specified and directed

S&F in replacement GI tubing medium grade with all fitting and fixed to walls & ceilling or laid in floors, bore of pipe 15 mm complete all as specified and directed. Make : Jindal/Tata/surya prakash

Ditto all as per item No 16 here in before but bore of pipe 20 mm complete all as specified and directed. Make : Jindal/Tata/surya prakash

Ditto all as per item No 16 here in before but bore of pipe 25 mm complete all as specified and directed. Make : Jindal/Tata/surya prakash

S&F in replacement 15 mm bore gun metal gate/stop valve (ISI Mark) with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed. Make - Jindal/LeaderVenus

Ditto all as per item No 19.00 here in before but gun metal gate/stop valve 20 mm complete all as specified and directed. Make : Jindal/Tata/surya prakash

Ditto all as per item No 19.00 here in before but gun metal gate/stop valve 25 mm complete all as specified and directed. Make : Jindal/Tata/surya prakash

S&F PVC insulated PVC sheathed flexible round stranded copper wire 6.0 sqmm, 3 core complete all as specified and directed.

Comprehensive repair/maintenance of storage type electric water heater (Geyser ) vertical or horizontal type of capacity 50 Ltrs comprising of the following :- (a) Inspection, taking down, opening or dismantling, de-scaling, brushing and thoroughly cleaning the storage tank up to the satisfaction of the Engineer-in-charge. (b) checking of all stop cock, pressure release valves, fusible plugs for its serviceability etc. in situ to ensure free movement of the parts including supply and replacing the washers/gasket nut etc. (c) Checking and rectify earth continuity of the Electrical circuits of the Geysers and power point. (d) Checking,and re-fixing thermostat and re-adjust. (e) De-scaling the immersion type heating element and siphon assembly with diluted Hydro chloric acid or clear pedette solution. (f) Checking of indicator lamp for it serviceability . (g) Re-assembling the Geyser, re-install and testing complete. Note : Parts / components of geysers found unserviceable shall be replaced by the contractor. New parts/components required shall be measured and paid separately under item No 25.00 to item No 32.00 here-in-after as supply only and labour charges required for replacement are deemed to be included in the quoted rate.

Ditto all as per item No. 22.00 here-in-above but Geyser of capacity 25 ltrs complete all as specified and directed.

Supply only thermostat of Type EST 11 / 20A, 240 Volt of approved make and having ISI mark complete all as specified and directed.

Supply only thermostat of Type EST 7 / 15A, 240 Volt of approved make and having ISI mark complete all as specified and directed.

Supply only heating elements of capacity 2 KW AC 240 volts suitable for storage type electric water heater as per site requirement (press type /screw type/ triangular/ circular base or ceramic cartige type), ISI marked complete all as specified and directed.

Supply only heating elements of capacity 1.5 KW AC 240 volts suitable for storage type electric water heater as per site requirement (press type /screw type/ triangular/ circular base or ceramic cartige type), ISI marked complete all as specified and directed.

Supply only PVC insulated PVC sheathed flexible round stranded copper wire 2.5 sqmm, 3 core complete all as specified and directed.

Supply only safety valve suitable for 25 Ltr/50 Ltr geyser complete all as specified and directed.

Supply only Apparatus plate suitable for 50 ltrs capacity geysers.

Supply only Apparatus plate suitable for 25 ltrs capacity geysers.

S&F plug top 3 pin, 16 amps complete all as specified and directed.

S&F plug top for earth plug socket upto 20 amp C-Curve complete all as specified and directed.

S&F earth plug socket with top and MCB upto 20 amp DP incl taking down old unserviceable one complete all as specified and directed.

S&F indicating lamp LED Neon type, 240 volt AC suitable for 25/50 ltrs capacity Geyser complete all as specified and directed.

S&F chromium plated connecting pipe for hot water of length upto 60cm long, including two brass connecting nut with gasket and connecting up complete all as specified and directed.

S&F PVC connecting pipes with brass adapter 450mm long complete all as specified and directed.

S&F non return valve 15mm bore complete all as specified and directed.

S&F anchor bolt of size 10mm dia and 100mm long bolt including, nut, washer for mounting the geyser complete all as specified and directed.

Taking down Geyser of capacity 50 ltrs from its existing position after disconnecting inlet and outlet water connection including material and labour for spray painting to Geysrs with one coat of Ist grade synthetic enamell paint of approved list after preparation of old steel surface including writing serial / MES number as specified (with black colour paint with each letters/figures(in Block) of height n.exc 2 cm ) and refixing the Geysers to its existing position on completion of painting including making inlet/outlet water connection and testing complete all as specified and directed.

Ditto all as per item No. 41.00 here-in-above but geyser of capacity 25 ltr complete all as specified and directed.

S&F Geyser 50 ltr capacity vertical type with BEE 3 star rating, having working pressure 8.0 Kg/cm² (max), electric water heater with ABS cover outer body 3mm EPAC (Engineered Polymer Anti Corrosion) coated inner tank to suit any kind of water, interchangeble colour panel, vitreous enamel coated incoloy heating element for long life, adjustable capilary thermostat for temparature regulation, multifunctional safty valve included Hot and Cold water CP Flexible pipe etc and fixing along the wall all as specified and directed also including taking down Old one and deposting to MES store yard complete all as specified and diercted. (Note: Rate of fixing arrangement as directed included in quoted rate)

Ditto all as per item No. 43.00 here-in-above but geyser of capacity 25 ltr complete all as specified and directed.

Ditto all as per item No. 43.00 here-in-above but geyser of capacity 10 ltr complete all as specified and directed.

M&L for disconnecting inlet and outlet water connection of unserviceable water heater of capacity 10/25/50 Lts and deposite the same in MES store yard all as specified and directed.

M&L for fixing of Geyser of 10/25/50 Ltrs capacity after connecting inlet and outlet water connection including S & F of anchor Nut-bolt of size 10mm dia and 100mm long bolt including, nut, washer all as specified and directed.

S&F AC Three phase static Electronic KwH energy meter of accuracy class 1.0, 3-Phase, 4-Wire, 50Hz with backlight LCD display of rating 10-60A with transparent hinged type Box with six month history of energy in KWH including taking down and deposite of old unserviceable meter in MES store yard all as specified and directed Make-L&T.

S&F AC Single phase static Electronic KwH energy meter of accuracy class 1.0, 240V, 50Hz with baclite LCD display of rating 10-60A with transparent hinged type Box with six month history of energy in KWH including taking down and deposite of old unserviceable meter in MES store yard all as specified and directed Make-L&T.

Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia( THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 32 X6 mm 7.5 m . The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg BackFill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification . GI Electrode Shall be tested from CPRI.The earting pit should be cover with pcc(1:2:4 , B1) cover ,of 450 x 450 mm complete all as specified and directed make ASHLOK / INDELEC/JMV /TERCEL.

Supply and install Test point Terminal block made of gun metal or phosphor bronze size 75x75x25 mm drilled and screwed incl 3 nos 8mm dia 25mm long hex head screw complete all as specofied and directed.

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site complete all as specified and directed. (Note : To be measured only when found serviceable in all respects complete for reuse)

M&L for concealed point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface for the following: - One light point controlled by one switch

Ditto all as per item No. 54.00 here-in-before but one fan point/ call bell controlled by one switch

Ditto all as per item No. 54.00 here-in-before but One 3 pin socket outlet, 5 Amp independent

Ditto all as per item No. 54.00 here-in-before but one 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for concealed point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

Ditto all as per item No. 58.00 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for AC / Gyser socket outlet on independent board complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc for the following: - One light point /bell point controlled by one switch

Ditto all as per item No. 60.00 here-in-before but one fan point/ call bell controlled by one switch

Ditto all as per item No. 60.00 here-in-before but one 3 pin socket outlet, 5 Amp independent

Ditto all as per item No. 60.00 here-in-before but One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for point wiring with FRLS PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLS PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

Ditto all as per item No. 4.00 above but with 4 sqmm ( Nominal area ) cable with 4 Sqmm size copper earth continuity conductor for AC / Gyser socket outlet on independent board complete all as specified and directed.

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

Fixing only Switch piano any type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F Switch socket combination 2 in 1, 5 Amp flush type complete all as specified and directed.

Fixing only Switch socket combination 2 in 1, 5 Amp flush type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F Switch socket combination 3 pin 6amp/16amp and one 5 in 1 flush type complete all as specified and directed.

Fixing only Switch socket combination 5A/ 16A, 5 in 1 flush type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F Lamp holder , PVC / Polycarbonate type with back plate suitable for B22 lamp including 8 Watt LED Bulb complete all as specified and directed. Make: Havells, Model: PHHD015 or equivalent model of Philips / Bajaj /Surya

S&F Ceiling rose, 3 way PVC insulated body complete all as specified and directed.

Fixing only Ceiling rose any type (as retrived against item Ser No 2.00 here-in-before)

S&F ceiling fan stepped type electronic fan regulator flush type complete all as specified and directed.

S&F Bell , AC, 230 Volts, single pole complete all as specified and directed.

S&F Bell push, flush type, 5 amp complete all as specified and directed.

Supply and fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with double pole MCB of 20 amps complete all as specified and directed.

Supply and fixing of three pole and neutral enclosure with a three pin and earth plug and socket complete with TPN MCB of 32 amps complete all as specified and directed.

Supply and fixing of three pole and neutral enclosure with a three pin and earth plug and socket complete with TPN MCB of 63 amps complete all as specified and directed.

S&F LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white) complete all as specified and directed. Make:- Surya Cat Part No -SLE-BT18W ARROW or equivalent model of Philips / Bajaj /Crompton

S & F LED Tube Light luminaries with high performance LED with driver 1 x 9W (2 Feet long, Cool day/Warm white) complete all as specified and directed. Make:- Surya Cat Part No -SLE-BT09W ARROW or equivalent model of Philips / Bajaj /Crompton

Supply and fix for Recess mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, all as specified and as directed. Make - Havells /C&S/crompton greaves/Surya

S&F Street light fittings 1x 15W New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver with 1.5 M long suitable size all as specified and directed.Make Havells/bajaj/phillips/CG

S&F steet light bracket made out of 25 mm bore GI Light grade 1.00 M long to required shape as in bracket for steet light fittings fixed with two pair of MS flate iron clamp of size 50mm X 6 mm thickness of required shape with nuts, bolts and washers suitable for steel tubular pole including painting of mild steel flate iron surface with two coates of synthetic enamel paint over a coat of red oxide primer complete including taking down unserviceable one all as specified and directed.

Taking down of Old MCB DB / control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site complete all as specified and directed.

S&F Sheet metal enclosure for MCB DB double door Triple pole & Neutral 415 Volt, double door, suitable for 4 way with dim rail earth and neutral bar bar at incoming end complete all as specified and directed. Make:- Legrand/Havells/C&S

S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 12 way with common bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with common bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way with common bus bar at incoming end complete all as specified and directed.

S&F Sheet metal enclosure for MCB DB double door single pole & Neutral 2 way with common bus bar at incoming end complete all as specified and directed.

S&F MCB Four pole, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed. Make:- Legrand Cat No 408700-02 or equivalent model of L&T/ C&S/ Indoasian

S&F MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make: Legrand Cat No 408587-95 or equivalent model of L&T/ C&S/ Indoasian

S&F MCB Single pole and neutral 240 Volt 20 to 40 Amp capacity complete all as specified and directed.

Taking down carefully existing unserviceable tube light / LED light fitting of any watt from existing location to carry out the necessary repair like replacement of bipin holder, tubes etc and fixed to original location after made functional including necessary electric connections with 3 core flexible cable of size 23/0.0076 mm complete all as specified and directed. (Materials measured and paid under relevent item)

Supply and fix LED Neo tube light fitting of 1X18 W with tube (4 Ft) 240 V Wall mounted LED battenUltra bright LED polycarbonate Tubelight with very high efficacy suited for installation in existing T8 tubelight with G13 lamp holders to give glare free light.complete with all accessories internally pre-wired and inclg connection. Make :Crompton/Havells/Bajaj/CG/Phillips

Material & Labour for recessed round down lighter with high lumen output LED light fittings for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 12 watt LED CDL light, all as specified and as directed. Make - Crompton/ Havells/ Bajaj / C&S / Surya

Supply only LED light fitting 1x 9 W, 230 V, 2 feet with extruded aluminium housing with integrated LED driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.MAKE SURYA Cat Ref SLE BT 10 or equivalent in Philips/Havells

Supply only for Recess mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, all as specified and as directed. Make - Havells /C&S/crompton greaves/Surya

Supply only Surface mounting high lumen output LED light fittings of size 2 ft X 2 ft for metallic false ceiling type armstrong/US gypsum or similar ceiling mounting system with concealed or exposed 'T' section including 36 watt LED CDL light, all as specified and as directed. Make - Havells /C&S/crompton greaves/Surya

Supply only LED Gate light 30 Watt New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source., Havells /Crompton/ philips /HPL/ Surya all as specified and as directed.

supply only Street light fittings 1x 15W New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver with 1.5 M long suitable size all as specified and directed.Make Havells/bajaj/phillips/CG

S&F in replacement MS Box in concealed of any type and any size complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 150 x 200 x 3 mm including refixing Switch, socket,regulator etc complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 100 x 150 x 3 mm including refixing Switch, socket,regulator etc complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 100 x 100 x 3 mm including refixing Switch, socket,regulator etc complete all as specified and directed.

S&F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 150 x 200 x 50 mm deep complete all as specified and directed.

S&F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 100 x 150 x 50 mm deep complete all as specified and directed.

S & F in replacement PVC ractangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 100 x 100 x 50 mm deep complete all as specified and directed.

S&F in replacement flexible wire 2 core copper size 1.5 sqmm complete all as specified and directed.

S&F in replacement MCB Four pole, 415 volts, 40-63 Amps, breaking capacity 10KA Cat No 408700-02, make: Legrand or equivalent model of L&T, C&S, Indoasian

S&F in replacement MCB 'C' series Double pole 40 to 63 Amps, breaking capacity 10KA, Cat No 408637-39, make: Legrand or equivalent model of L&T, C&S, Indoasian

S&F in replacement MCB 'C' series Double pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make:- Legrand Cat No 408628-36 or equivalent model of L&T/ C&S/ Indoasian

S&F in replacement MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA complete all as specified and directed. Make:- Legrand Cat No 408587-95 or equivalent model of L&T/ C&S/ Indoasian

Taking down of wiring/Submain wiring upto size three phase 10.0 sqmm and refixing the same through new/ existing casing-caping or conduit for distribution of balanced elect load at any indicated situation. Note: PVC casing-capping or PVC conduit shall be measured and paid under separate item here in-after

Supply only PVC Casing-Caping of size 25mm.

Supply only PVC Conduit of size 20mm.

Taking out old U/S underground LT Service wire of any size, any position from trenches, floors and walls, all as specified and directed.

S&F 4 Sqmm 1100 Volts grade heavy duty cable PVC insulated multi stranded aluminium conductor of following size served with inner seathing of PVC tape and over all PVC seathed for service conection suspended by insulating hangers not more then 01 Mtr apart including 4mm dia suspension wire and twin core cable flate or circular including taking down complete as directed and specified. Make of Cable: Richa/Harsh/Finolex/RR Cable

Ditto all items as per Ser No 99.00 above but 6 Sqmm

Ditto all items as per Ser No 99.00 above but 10 Sqmm

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation complete all as specified and directed.

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through PVC Conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through PVC Conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through PVC conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 2.5sqmm as earth continuity conductor drawn through PVC conduit complete all as specified and directed. Note :- (a) PVC Conduit / casing- caping shall be included in same rate. (b) For concealed sub-main wiring cutting chases will be measured & paid separately. (c) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

Taking down following unservisible items form existing board / location and fixed the following in same position incl electrical connection complete all as directed.

Switch piano 5 amp flush type as specified and directed.

Switch piano 15 amp flush type as specified and directed.

Socket outlet 5 amp 5/6 pin as specified and directed.

Socket outlet 15 amp 5/6 pin as specified and directed.

Switch socket combination 6 Amp 6 pin flush type as specified and directed.

Switch socket combination 16 Amp 6 pin universal type as specified and directed.

Switch socket combination with box 6 Amp 6 pin flush type as specified and directed.

Switch socket combination with box 16 Amp 6 pin universal type as specified and directed.

Ceiling fan regulator electronic stepping type, SP 230 Volts, suitable for 1200 mm/1400 mm sweep ceiling fan

PVC angular holder polycarbonate as specified and directed.

Call bell ding dong type 230/240 volt AC as specified and directed.

Plug top of 15 amps 3 pin as specified and directed

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 85,245.50 (refer Tender Srl Page No 40). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

M/s. RAMPHAL GARG

M/s. MD IRSHAD