Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹43.5 LAccepted-AOC SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASAPURA CV RAMAN NAGAR PO BANGALORE 560 093 | BANGALORE | BANGALORE | KARNATAKA | 560093 | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹44.4 LRejected-Finance NO 49 MSN NILAYAM 3RD CROSS HILL VIEW GARDEN TUNAHALLI SUBRAMANYAPURA POST BANGALORE 560061 | BANGALORE | BANGALORE | KARNATAKA | 560061 | SECOND | Rejected-Finance BEING NOT LOWEST | |
| 3 | THIRD₹44.6 LRejected-Finance NO 12 5TH B CROSS SHARADAMBA NAGAR M E S ROAD BANGALORE 560013 | BANGALORE | BANGALORE | KARNATAKA | 560013 | THIRD | Rejected-Finance BEING NOT LOWEST |
Tender Value
₹40.5 L
EMD Value
₹81,000
Closing Date
30 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
PROVISION OF ADDITION ALTERATION TO OLD SMC BLDG NO P15 AT IAM IAF UNDER GEAF MARATHAHALLI
2022_MES_527394_1
8952/E8
Open Tender
Civil Works
Item Rate
180 days
GE (AF) MARATHAHALLI
AS PER ENIT
10 documents required · 10 mandatory
₹500
GE (AF) MARATHAHALLI
₹81,000
Yes
11 Aug 2022
30 May 2022
5 Jul 2022
30 May 2022
30 Jun 2022
17 Jun 2022
Amount
Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing dressed stone works and pre-cast concrete articles complete all as specified and directed.
M&L for pre cast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) block masonary with solid block exc 10 cm width and setting in Cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster on brick or stone walls or concrete surfaces including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick in Cement mortar 1:4 on fair faces of brick walls, block masonary finished surfaces even and smooth without using extra cement complete all as specified and directed.
Demolition of Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.
Excavation in trenches n. exc 1.5m wide and n. exc. 1.5m depth for foundation and getting out in hard/dense soil complete all as specified and directed.
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed.
Removing excavated material to a distance exc. 1.50 km but n. exc. 5 Km and depositing where directed complete all as specified and directed.
M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation filling in mass complete all as specified and directed.
M&L 75 mm thick cement concrete 1:4:8, type D-2, (40mm graded crushed stone aggregate) as in sub base floors complete all as specified and directed.
M&L 100mm thick cement concrete 1:2:4, type B1 (40mm graded crushed stone aggregate) finished even and smooth without using extra cement as in Flooring / path complete all as specified and directed.
Dismatling floor, hearth or wall tilling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for 25mm thick cement concrete , 1:2:4 type B-1 (20mm grade crushed stone aggregate) as in levelling coarse in flooring finished even and fair under floor finishes complete all as specified and directed.
M&L for Vitrified Ceramic Colour tiles 10 mm thick (Square / Rectangular) polished , area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including cement screed or bedding layer in 1:6. cement mortar 1 5mm thick complete all as specified and directed.
M&L for glazed coloured wall tiles of 300X450X7mm as in dados, set and jointed in neat cement slurry and pointed in coloured cement to match coloured tiles over and including10mm thick cement plaster in 1:4 as backing coat complete all as specified and directed.
M&L for non skid coloured ceramic tiles 7mm thick of size 400mX400mm in floor set and jointed in cement clurry and pointed with coloured cement to match with coloured tiles over and including cement screed or bedding layer of cement mortar 15mm thick in 1:6 complete all as specified and directed.
M&L for Pre polished chequred cement concrete tiles of size 30cm x 30cm x 25mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over and including 15mm thick screed bed or bedding layer in cement mortor 1:4 complete all as specified and directed.
Dismantling wall and ceiling boards (Fibre, pulp, insulation etc.) or insulation board/slabs/blankets) any thickness including cover fillets
M&L for 5 mm thick PVC sheet fillets of width 35 mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification complete all as specified and directed.
S & F of solid PVC wall lining consisting of 5 mm thick plain/ colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.
S& F Anodised aluminium snap grid of size 605 x 605 mm frame work for false ceiling complete all as specified and directed.
M & L for 12 mm thick Non asbestos fibre cement building board fixed or laid / inserted to timber /GI/Aluminium frame work with screw complete all as specified and directed.
Supply and fixing Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube in openings complete all as specified and directed.
Supply and fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site complete all as specified and directed.
S&F Mild Steel framed work such as grill gratings etc with ends of bars shouldered and /or rivetted or forged into spikes, framed guard bars barred iron doors, ladders framed balusters walk waysrallings, frameowrk of watertanks and similar work complete all as specified and directed.
M&L for 2nd class hard wood plain fillets square, rectangular or triangular in section clean sawn, secured with nails brads, exc 6 & n.exc 13 sqcm complete all as specified and directed.
M&L for 18/19mm thick Perlaminated particle boards, interior grade perlaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.
S&F 75mm width flaps Butt Hinges hinges, cast Brass, with mild steel hinge pin, bright polished and fixed, type B-12 or Magnetic type complete all as specified and directed.
S&F for 75mm Rim latch with two levers of brass body, stove enameled finish with brass knob or lever handle complete all as specified and directed.
M&L for 2 lever brass locks, Cupboards, grade I, size 50mm complete all as specified and directed.
Supply and fixing 125 mm long butt hinges, medium weight cold rold mild steel and fixed complete all as specified and directed.
Supply and fixing 150 mm long aluminium, anodized barrel tower bolts of extruded section complete all as specified and directed.
Supply and fixing 100mm long extruded alluminium alloy handle, cast type, anodized complete all as specified and directed.
Supply and fixing 150mm long extruded alluminium alloy handle, cast type, anodized complete all as specified and directed.
Supply and fixing 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.
S & F in repairs old Floor door of stopper aluminium alloy body and tongue, 150 mm overall length, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
S & F in repairs aluminium Door closer , aluminium die cast body , hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed .
Taking up or down GI tubing 15 mm bore from trenches/wall including all fittings segregated and stacking the pipe complete all as specified and directed.
All as per Item No 38 above but 20 mm bore complete all as specified and directed.
All as per Item No 38 above but 25 mm bore complete all as specified and directed.
Refixing old serviceable steel tubing 15 mm bore and connections in new or old position (walls, ceiling, floor etc) complete all as specified and directed.
All as per Item No 41above but 20 mm bore complete all as specified and directed.
All as per Item No 41 above but 25 mm bore complete all as specified and directed.
S&F GI pipe medium grade 15mm bore fixed to wall wall and ceiling or laying in floors, with all new fittings as required at site complete all as specified and directed.
All as per Item No 44 above but 20 mm dia bore complete all as specified and directed.
All as per Item No 44 above but 25 mm dia bore complete all as specified and directed.
S&F in repairs including disconnecting tanks ,1000 Ltrs Rotational moulded polyethylene water storage tanks, ISI MARKED (cylin-drical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F in repairs including disconnecting tanks ,S&F 500 Ltrs Rotational moulded polyethylene water storage tanks, ISI MARKED (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.
S&F in repair Chromium plated fancy type bib taps with wall flange, cast copper alloy with round operating knob screwed down high pressure, screwed for 15mm bore iron pipe complete all as specified and as directed.
S&F in repair 15mm bore pillar taps fancy type cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered 'HOT' or 'COLD' with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair stop valves/angle cocks or two way angle cock cast copper alloy concealed type long body with round operating knob chromium plated screwed down high pressure, screwed both ends for 15 mm bore iron pipe or brass ferrule complete all as specified and as directed.
S&F in repair 20 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and complete all as specified and directed.
S&F in repair 15 mm bore ball valves, high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed (Minimum weight 210gms) complete all as specified and directed.
All as per item No 53 here-in-before but 20 mm bore complete all as specified and directed.
S&F in repair PTMT waste coupling of 32 mm dia (half or full thread) including taking down old coupling of any description complete all as specified and directed.
S&F Grating 150mmx150mm made out of stainless steel complete all as specified and directed.
S&F in repair 15 mm dia 450 mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.
S&F in repair PVC connection pipe 15mm dia and 600 mm long with two PTMT nuts at each ends with rubber washer complete all as specified and as directed.
S&F in repairs vitreous china squatting pan, orissa pattern of size 580mmX440mm white with integral foot rests, fixed in repairs including trap set and provision ofconcrete bedding (excluding flushing cistern and flush pipe) complete all as specified and as directed.
S&F in repairs vitreous china wash down water closet pan (semi pedestal pattern) (Anglo Indian type), white (excluding fixing bolts, flushing cistern and flush pipe) as in repairs complete all as specified and as directed.
S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed.
S&F In repairs PVC valveless, symphonic action type flusing cistern low level, white with inlet ball valve float and valve float and handle including brackets 10 lts capacity fixed in repairs complete all as specified and as directed.
S&F flush pipe of polyethyene of low and high density of PVC 32mm for low level cistern as in repairs complete all as specified and as directed.
S&F in repairs Vitreous china Urinal, half stall type, white (Excluding flushing cistern, flush pipe and waste pipe) Fixed in repair complete all as specified and as directed.
S&F urinal spreader of PTMT any colour for fixing with 15mm dia pipe for half stall urinals complete all as specified and as directed.
S&F Brass chromium plated tabular towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.
S&F hand shower (Health Faucet) with 8mm dia 1.20 mtr long stainless steel flexible hose and wall hook fixed with brass screws complete all as specified and as directed.
Demolition of cement concrete (un-reinforced) of any description on roofs, floors (other than ground floors), beams, staircases, landings, chajja & similar work including existing roof treatment if any complete complete all as specified and as directed.
M&L for pressure grouting to leakage/seepage portion of RCC slabs, including drilling holes 12mm dia in RCC slab with power drill up to half of the depth of slab at a spacing not exeeding 1.0 mtr centre to centre, fixing PVC sleeves/nozzle 10mm dia, pressure grouting using compressure with cement slurry mixd with water proofing compound (as per manufacturer instructions), top end of the PVC sleeves/nozzle shall be cut to flush the top of slab and sealled with PVC plugs after grouting done complete including all other necessary arrangement required complete all as specified and directed .
M & L for brushing neat cement slurry at the rate of 3.0Kg of cement per Sqm on old surfaces of concrete or plaster on roof all as specified and directed.
M&L for PCC 1:2:4, type B0 using 12.5mm graded crushed stone aggregate as in roof padding all as specified and directed.
M&L for 10mm thick rendering in Cement mortar 1:3 mixed with water proofing compound as per manufacturers instructions complete all as specified and as directed.
Supply only liquid water proofing compound
M&L for labour for preparation of surface by removing dust, dirt and applying oil bound bitumen primer @0.20Kg/sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4.0Kg/sqm reinforced with non woven polyester matt weighing not less than160gm/sqm having softening point not less than 150̊ degree centigrade, having tensile strength of 650N/sqcm and 350N/sqcm in longitudinal and transverse directions respectively of the reinforcement tearing strength of180N by torch application with minium 10cm side overlap and 15cm end lap, applying a coat of blown grade hot bitumin 90/15 over the membrane @ 1.2Kg/sqm and on drying apply a coat of solar reflective bituminous aluminium paint over membrane @ 0.1kg/sqm all as specified and directed.
Demolition of concrete(reinforced) of any description and in any position not otherwise speifically provided complete all as specified and as directed.
Material and Labour for pre cast cover slab using PCC (1:2:4) type B1 and set in Cement mortar 1:6 with top surface finished even & fair complete all as specified and as directed..
Used & waste formwork for soffits of suspended slab such as roof slab , floors slab , landings and similar work n, exc. 200 mm thick complete all as specified and as directed.
M&L for RCC Type B1 (1:2:4) (using 20 mm graded aggr) (Nominal Mix) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves and the like complete all as specified and as directed.
S & F TMT Bars 10 mm dia & over, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends & binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and as directed.
M&L for applying 1.5 mm thick wall care putty on wall complete all as specified and as directed.
M & L Two coats of Distempering on wall and ceiling surfaces with Ist quality acrylic distemper (Ready Mix) having VOC content less than 50 gms/ ltr of approved manufactured of required shade and colour cmplete as per manufacture instructions complete all as specified and as directed.
Taking down chowkhats or frames with shutters exceeding 1.5 Sq.m and not exc. 4 Sq. m Each (without taking off shutters from the frames) complete all as specified and as directed.
Taking down chowkhats or frames with shutters not exc. 1.5 sq. m Each (without taking off shutters from the frames) complete all as specified and as directed.
S&F 12 mm thick toughned glass door (overall size 2.0 X 2.4 m) with double leaf shutter including all cutting edges, polishing, making holes,patches, 300 mm long chromium plated handles, CP Brackes etc complete all as specified and directed. (Each leaf comprising of CP Handles - 02 Nos, CP Braackets - 02 Nos , Floor mounted hydraulic door closer -02 Nos, IAM Logo on glass door of size not exceeding 600 x 450 mm on both leaf duly computerised embowging complete all as specified and as directed.
S&F powder coated Aluminium section for door frame , windows, ventilators, partitions, with one or more rebates, including joining cleats for fixing necessary lugs complete frame work complete all as specified.
S&F powder coated Aluminium section for door shutters aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, powder coated aluminium shap beading screws etx complete all as specified
S&F powder coated Aluminium section for window and ventilator side hung type without sash aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium shap beading screws, powder coated aluminium fittings such as peg stays 150 mm long ( 1 Nos) hinges type B-21 100 mm long (2 Nos) suitable handle 1 Nos complete all as specified
S&F powder coated Aluminium grill for window / ventilators of mesh size 75 x 75 mm and made out of 4 mm thick aluminium power coated sections including necessary fitting arrangements complete all as specified and as directed.
S & F Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.
S & F 4 mm sheet glass, ordinary quality and glazing with oil putty in squares n exc 0.5 sq m Each pane all as specified and as directed
M&L for 12 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination as in wall, fixed with screws to aluminium frame complete all as spd complete all as specified and as directed.
Taking down carefully aluminium/ copper wiring/light point wiring complete with or with out conduits etc, including fittings such as switches ceiling roses etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed.
M&L point Wiring complete with 1.5 Sqmm single core FRLS PVC insulated unsheathed cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit incl accessories surface type run on walls/ ceiling incl metalbox concealed on walls with moduler cover plate with frame fixed for housing the moduler switch, sockets incl provision of 1.5 Sqmm FRLS PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and as directed.
(a) One Light point controlled by one switch
(b) One fan/Ex. fan point controlled by one switch.
(c) One 5A 2pin/3pin switch socket out let multipurpose on independent Board.
All as per item No -94 above but wiring complete with 2.5 Sqmm for 5 pin 5/15A socket multipurpose on independent board complete all as specified and as directed.
M&L for Modular Switch 1 way 6 Amps 1 Module
M&L for Modular switch and Socket combination ,6 Amps- 2/3 pin combined 3 modular
M&L for Modular switch socket combination , 6 A/16A 3 modular
Material and labour for PVC ceiling rose two to three terminals complete all as specified and as directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.
Supply and fixing in repair round shape LED recessed / surface light fitting 15 W complete with drivers ,holders LED lamps including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal Complete all as specified and as directed.
Supply and fixing ceiling fans complete with blade, down rod ,electronic regulator and accessories 230V SP 1200 mm Sweep min air delivery 210 CFM service value 6.00 BEE five star rated brushless direct current motor (BLDC)ng,high speed complete all as specified and as directed
Provn of PVC regid conduit of size 20mm dia concealed on wall and leave one single core wire and knote both end of the conduit for stretching the cable in TV cable/Telephone cable/projector complete all as specified and directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter ,voltage 230 V ,50 Hz,rpm 1200 , copper winding of sweep 250 mm including suitable size hole cutting on wall complete all as specified and directed.
Material and Labour for sub main wiring 1100 volts grade PVC insulated FRLS multistranded copper conductors, two runs of single core 6 Sqmm along with one run 6 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit including taking out the existing one all as specified and as directed
Material and Labour for sub main wiring 1100 volts grade PVC insulated FRLS multistranded copper conductors, two runs of single core 4 Sqmm along with one run 4 Sqmm PVC insulated single core FRLS multistranded copper conductor cable as earth continuity conductor along with one run of PVC medium grade conduit including taking out the existing one complete all as specified and as directed
Supply and Fixing in repairs MCB DB SPN 8 way, double door,240 V, AC, 50 Hz complete all as specified and as directed
Supply and Fixing in repairs VPTN MCCB 125 A, DB 4 way, double door,415 V, AC, 50 Hz, complete all as specified and as directed
Supply and Fixing in repairs MCCB 125 A,4 pole rating, 16KA , 415V, 50 Hz AC Complete all as specified and as directed.
Supply and Fixing in repairs MCB SP 5 to 32 Amps rating, 10 KA Ç 'curve 240V, 50 Hz AC Complete all as specified and as directed.
Supply and Fixing in repairs MCB SPN 40 Amps rating, 10 KA 'C 'curve, 240V, 50 Hz AC Complete all as specified and as directed.
Supply and fixing 1x70 W LED flood light fitting 230V out door type with thermal management in multiple optics and equipped with IP-66 protection with impact and corrosion resistants complete with driver and lamp complete all as specified and as directed.
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed
Provn of hook for hanging ceiling fan on RCC roof/beam complete all as specified and as directed.
Dismantling the defective Exhaust fans motor 250mm sweep taking to work shop and by taking out burnt copper winding and rewinding with super enamelled copper wire of existing gauge and weight including replacement of all insulation material, including painting and refixing complete all as specified and as directed
Supply and install 2 Ton 5 star split inverter AC indoor/out door unit complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality complete all as specified and directed
Supply and install 1.5 Ton 5 star split inverter AC indoor/out door unit complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality complete all as specified and directed
Supply and fix suitable size copper refrigerant pipe of 1.5 Ton/2Ton splitAC including necessary insulation and thermo rexine tape etc.complete all as specified
Supply and fix rigid non-metallic PVC flexible pipe of dia 20 mm for drain out the water from indoor unit and fixing accessories such as saddles, pipe hook etc. complete all as specified.
Sub main wiring with Two runs of single core pvc insulated cable FRLS with copper conductor multistranded 1100 volts grade 4.0 sqmm through and including with suitable size of PVC conduit and its accessories , surface/ ceiling along with fixing arrangement etc including one run of 4.0 sqmm pvc insulated multistranded copper earth contuinuity conductor and connected to common earth dolly complete all as specified.
Supply and fix single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one 20 Amps SPN MCB complete all as specified and as directed.
Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type & each designed for input variation between 170V to 270V with output voltage stabilized at 230V of capacity 4 KVA complete all as specified and as directed.
Supply and fix voltage stabilizer for automatic operation single phase naturally air cooled indoor type & each designed for input variation between 170V to 270V with output voltage stabilized at 230V of capacity 5 KVA complete all as specified and as directed.
Supply and mounting on wall/sunshade of Outdoor unit stand for split air conditioner including civil work complete all as specified and as directed.
M & L excavation in trenches in soft/loose soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed.
M & L for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed
M & L for sand cushioning with a layer of river sand 23 cm thick under and above the cable complete all as specified and as directed
S & L sub class burnt bricks for cable protection complete as specified as directed
Supply and laying cable XLPE insulated armoured,electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3½ core connected with suitable legs including taking out the existing unserviceable cable
Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to GI strip 25 x 4 mm by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized iron pipe 32 mm bore (light grade) connected to machinery/ equipment / main DB all as shown in Electrical plate No. 3 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., Complete all as specified.
M & L for GI tubing light grade 50mm bore with all accessories for cable protection fixed on poles/bldgs of laid in trenches incl necessary MS clamps, bolts and nuts etc complete all as specified and as directed.
PRAGATHI BUILDERS
Shanthi Construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .