SPECIAL REPAIR TO BLDG NO. P-05 OF SUPPLY DEPOT JALANDHAR CANTT AND CERTAIN OTHER SANCTIONED WORK UNDER GE (EAST) JALANDHAR CANTT

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed

Excavation in trenches in soft /loose soil, not exceeding 1.5 m wide and not exceeding 1.5m in depth for foundations etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Material and labour PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, mass concrete and foundation of electric pole, platforms etc., including necessary form work and fair finish to exposed surface without using extra cement complete all as specified and directed.

Returning, filling in including leveling, watering and well ramming in layers n. exc. 25 cm thick each layer complete all as specified and directed.

Removing excavated material (soils) to a distance n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point complete all as specified and directed.

Material and labour brick work with old size sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius and built in cement mortar (1:6) complete all as specified and directed.

Material and labour for brick work with old size sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed.

Material and labour for 40mm thick damp proof course to horizontal or vertical surfaces including necessary formwork in cement concrete (1:2:4) type B-0 complete all as specified and directed

Supply only integral water proofing compound all as specified and directed.

Material and labour for anti-termite treatment the bottom and sides of excavation at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

Material and labour for anti-termite treatment the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and directed

Material and labour for anti-termite treatment the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed

Material and labour for anti-termite treatment the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and directed

Material and labour for anti-termite treatment the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in foundation, including rafts, footings, foundation beams, plinth beams, mass concrete and bases for columns etc complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts etc complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth courses, roof kerbs or mud stops, benching, coping, bed plates, parapets, water through and the like etc including weathering, slightly rounded or chamfered angles throating, edges of interlocking/ chequered tiles etc complete all as specified and directed

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in slabs supported on wall, beams and column in floors, roofs, landing etc. complete all as specified and directed.

Material and labour RCC M-25 (Design mix) using 20mm graded stone aggregate as in chajjas, parapet, facia etc. complete all as specified and directed.

Material and labour mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

All as per Srl item No 20.00 but 5mm dia and over upto and including 10mm dia inserting, spacers and binders

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter, for rough finished concrete surfaces complete all as specified and directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, square, rectangular in rough finished surfaces of concrete complete all as specified

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc also splays between floors and beams Complete all as specified.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work n. exc. 200mm thick (Horizontal or sloping) for flat & rough finished surfaces of concrete complete all as specified and directed.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n. exc. 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc. 10cm but n. exc. 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

Material and labour for approved earth filling including spread and levelled in layers not exc 25 mm thick watering and rammed to a true surface complete all as specified.

Material and labour 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in sub floors, sub base, hard standing, concrete surfaces finished even & rough to receive topping floor finish/layer all as specified & directed.

Material and labour 25mm thick PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in sub floors, sub base; concrete surfaces finished fair & even to receive topping floor finish/ layer complete all as specified & directed.

Material and labour 18-20mm thick machine cut Kota stone slabs 550mm x 550mm as in flooring, jointed with grey cement mixed with pigment to match the shade of the slab including grinding, rubbing and polishing to mirror finish with & including screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for laying floor finishes including neat cement slurry with 3 Kg/Sqm complete all as specified and directed

All as per Srl item No 30.00 but as in skirting laid over and including 15mm thick rendering in cement mortar (1:4) as backing coat.

Material and labour 15/ 16mm thick machine cut Udaipur green polished stone slab, set and jointed with neat cement slurry mixed with pigment to match the colour of stone, laid over and including minimum 15mm thick screed bed in cement mortar (1:6) including cutting and polishing and making holes in stone and RCC shelves suitable for passing gas pipe with round edges as required complete all as specified and directed.

Material and labour for hard core of broken stone or boulder of gauge n. exc. 63mm, deposited, spread and levelled in layers n.exc. 15cm thick, watered and well rammed to a true surface complete all as specified and directed.

Material and labour 50mm thick PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in plinth protection, laid in panels including finishing the concrete surface even & smooth without using extra cement complete all as specified & directed.

Material and labour for APP based polymeric membrane minimum weighing 3kg/ sqm and minimum 3mm thick reinforced with polyester non wove fabric (wt. not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified and directed

Material and labour rendering 15mm thick cement plaster in cement mortar (1:3) on fair faces of brick or concrete surfaces, mixed with water proofing compound in the proportion as recommended by the manufacturer, surfaces finished even and smooth without using extra cement all as specified and directed. (Water proof compound shall be measured and paid separately).

Material and labour for applying a coat of hot blown paving industrial bitumen 85/25 at the rate of 1.20 kg/ sqm over the roof surface including cleaning surfaces complete all as specified and directed

Material and labour for brick tile terracing with 40mm thick brick tiles laid over and including 15mm thick screed in cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

Material and labour flush pointing to brick terracing tiles in cement mortar (1:3) complete all as specified and directed.

Material and labour PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in roof kerbs or mud stops, benching, edges of interlocking/ chequered tiles and the like including weathering, slightly rounded or chamfered angles throating, complete including necessary form work complete all as specified and directed.

Material and labour 15mm thick rendering in cement mortar (1:6) on fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour rendering 15mm thick cement plaster on brick or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion recommended by manufacturer, surfaces finished fair and even complete all as specified and directed. (WPC shall be measured and paid separately under appropriate item of this BOQ).

Material and labour 5mm thick rendering in cement mortar (1:3) as on ceiling including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of plastered or un-plastered surface of wall and applying two coats of dry distemper over a coat of chalk whitening complete all as specified and directed.

Material and labour preparation of new plastered surface of wall and applying three coats of white washing complete all as specified and directed.

Material and labour preparation of newly plastered or un-plastered surface of walls including cornices, plasters etc. and applying two coats of cement base paint complete all as specified and directed.

Material and labour mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. using steel conforming to Fe-410 Gde-E-250 complete including drilled for fixing of steel sheeting or other covering; doors, door frame chowkhats etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing including necessary cutting drilling and welding etc complete all as specified and directed.

Material and labour 35mm thick 2nd class hard wood factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of veneered particle board 12mm thick with commercial veneering on both faces with rails and style. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour 35mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

Supply and fixing Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.

Supply and fixing mild steel framed work for such as guard bars/ grills, grating etc with end of bars shouldered and/ or riveted forged into spikes, framed guard bars barred iron door, railings and similar work complete conforming to Fe-290 Gde E 165 including one shop coat of zinc chromate primer complete all as specified & directed.

Material and labour 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

All as per Srl item No. 52.00 here-in-before but 4mm thick

Material and labour galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

Material and labour mild steel work as in holdfasts, knee piece and similar small article complete all as specified and directed.

Material and labour mild steel sliding door bolts 250mm long stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Supply and fixing 100mm size mild steel butt hinges, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed.

Supply and fixing MS barrel tower bolt 200mm long stove enameled black with bright bolt and fixed in repair complete all as specified and directed.

Supply and fixing MS pressed handles, oval type, stove enameled black 150mm size complete all as specified and directed.

Material and labour preparation of new wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing 110mm bore PVC (SWR) rain water pipes single socketed in any length with rubber ring joints fixed to wall, laid in trenches or in floors complete all as specified.

Supply and fixing PVC (SWR) bends any radius 110mm bore complete all as specified and directed.

Dismantling of AC sheets (corrugated or semi corrugated) any thickness as in roof covering all as specified and directed.

Supply and fixing Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Supply and fixing Pre painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Taking down existing treatment over RCC roof/ sunken slab including PCC pedding etc complete all as specified and directed

Material and labour cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in roof padding etc. (average thickness 50mm) complete all as specified and directed.

Material and labour for cleaning top surfaces of cement concrete by wire brushing and applying 15mm thick cement plaster in cement mortar (1:3) on concrete surface of roof slab complete all as specified.

Material and labour 3mm thick superior multi polymeric water proofing treatment of weight not less than 3 kg/ sqm with properties of high penetration and the centre core consisting of 90 micron high molecular high density polyethylene (HMHDPE) film consisting of five layer. The superior multi poluplus shall be laid after preparing the surfaces by cleaning thoroughly to achieve as smooth surface over and including a coat of bitumen primer 9Manufactured by Sivan Tar Products0 @ 0.30 ltr/ sqm over and including a coat of hot applied blown bitumen of grade 85/25 @ 1.2 kg/sqm. The overlaps between super multi plus are minimum 10cm seam in width/ lengthwise complete all as specified and all as per manufacturer’s instructions

Dismantling structural steel work including door, gates but excluding framed truss etc complete all as specified.

Supply and fixing rolled mild steel work roof trussed (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, Angle, Channel or Flat Sections) including distance pieces, cleats etc, Fe-410-W (Gde E-250) complete all as specified and directed.

Material and labour for Mild steel work wind tie etc for roof including securing bolt, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Demolition of cement concrete of any description and in any position not otherwise specially provided for sunken floor complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. and removing surplus spoil out of defence land where directed complete all as specified.

Supply only liquid water proofing compound all as specified and directed.

Material and labour complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying three coats of white wash complete all as specified.

Material and labour complete removal of existing treatment by washing, rubbing down and stopping etc on wall surfaces and applying two coats of cement base paint complete all as specified.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area n. exc. 1.5 Sqm each for doors and windows complete all as specified and directed.

Taking down chowkhats or frame with shutter (without taking off shutter from the frame) area exc. 1.5 Sqm but n. exc. 4 sqm each for doors and windows complete all as specified and directed.

Supply and fixing steel window 1.25 mm thick box type (primer coated) ERW hollow P section of size 60mm x 25mm single rebated comprises glazed skeleton shutter ERW sec 50mm x 20mm and 1mm thick with two openable leaf consisting two No sash bars of T-section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 60mmx25mm and 1.25mm thick including cutting holes and making good dismantled portion PCC (1:2:4) type B-1 four No for each window) including following fittings welded to frame shutter: - (a) Hold fast, 150mm long of 12mm x 3mm made to shape-04 No per window. (b) Handle of z section 20mm x 25mm, 100mm long 01 No per leaf (c) MS tower bolt 150mm long- 2 No per leaf (d) z section 20mmx25mm, 100mm long stopper - 01 No per leaf (f) MS pintal hinges of size 75mmx12mm- 2 No per leaf (g) Fabrication & fixing arrangement as per Drg No CEJZ/TD-06/07. Note: Grills/ guard bars, glass, wire mesh and painted shall be measured and paid separately under respective item of this BOQ.

Material and labour for preparation of old steel surfaces of any description, over 10 cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Material and labour for point wiring with 1.5 sqmm (nominal area), 1100 volt grade PVC insulated FRLS type multi stranded copper conductor cable drawn in and including concealed rigid PVC conduit fire proof ISI marked with accessories including cutting chases for laying of conduit/ fixing of boxes in walls/ floors etc including making good to disturbed surfaces as per adjoining specification and terminated in concealed terminal boxes including MS concealed terminal boxes with plastic laminated bakelite sheet top cover 3mm thick make hylum or equivalent fixed with nickel polished screws with washers and earth continuity PVC insulated FRLS type cable with stranded copper conductor of size 1.5 sqmm (nominal area) green colour as earth wire connected with earth dolly for one light point controlled one switch complete all as specified and as directed.

All as per Srl Item No. 84.00 but one fan point controlled by one switch through regulator.

All as per Srl Item No. 84.00 but for 3 pin 5 Amp socket point controlled by one switch on independent board.

All as per Srl Item No. 84.00 but one socket point controlled by one the same board 3 pin 5 Amp with other switch

All as per Srl Item No. 84.00 but 3 pin 15 Amp socket outlet with 2.5 sqmm PVC insulated FRLS copper cable and 2.5 sqmm PVC insulated FRLS copper cable for continuous earth continuity conductor all as specified and directed.

Supply and fixing switch piano flush type, 5 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing switch piano flush type, 15 Amps, 240 Volt AC single pole, one way complete all as specified and directed.

Supply and fixing socket outlet multipurpose 3 in 1, 6 pin, 5 Amps, flush type complete all as specified and directed

Supply and fixing ceiling rose surface type bakelite 65 x 50mm three terminal complete all as specified and directed.

Supply and fixing in repair energy saving LED luminaries comprising of extruded aluminium housing high quality PC diffuser, reliable and robust housing structure, slim integrated design easy to install, 125 Lumens/ Watt 4 feet, 18 to 20 watt 124 volts AC supply to be fixed on PVC square boxes (02 Nos) complete prewired including connection & testing all as specified and directed

Material and labour for MCB SPN 20-32 Amps, 10 KA, B-curve complete all as specified.

Material and labour for MCB SP 6-32 Amps, 10 KA, B-curve complete all as specified and directed.

Material and labour for sheet metal enclosure for DBs when MCBs to be used, SPN 4 ways 240 V, with 200 Amps rated bus bar, double door, epoxy coated inside and outside with neutral and earth connection bar prewired complete all as specified and directed.

Supply and fixing exhaust fan metallic body, 450 mm sweep, 900 RPM, single phase, 230 Volt, heavy duty with louvered shutter including provision of three core copper conductor cable of required length of size 23/ 0.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nuts, bolts & washers complete all as specified and directed

Material and labour for cutting holes for exhaust fan of size 450/380mm dia sweep in brick walls built in cement mortar or cement lime mortar and stone walls built in cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed.

Material and labour for energy saving & environmental friendly long life versalite pressure di-cast aluminium luminaries with heat resistant glass and suitable optics for uniform distribution of light 20 watt LED for bldg security lights with high efficiently electronic driver, having IP-66 protection, surge protection min 2 KV power factor more than 0.9 complete operative on AC supply 140 volts to 270 volts pre-wired and product should be made in India qty including bracket made out of GI pipe 32mm dia bent to shape and clamps 40 x 6mm with nuts and bolts prewired products must be made in India only, connection and testing complete all as specified. Note: (i) Contractor shall be provided 2 years written manufacture's guarantee for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

All as per Srl item No. 99.00 here-in-before but 10 watt

Supply, laying, testing and commissionin of LT cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor size 10 Sqmm 2 Core all as specified and directed

All as per Srl item No. 101.00 here-in-before but size 16 Sqmm 2 Core

All as per Srl item No. 101.00 here-in-before but size 10 Sqmm 4 Core

Material and labour sand for cushioning with 8cm thick layer before laying of cable and 15cm thick layer after laying of cable in trenches complete all as specified and directed.

Supply & laying old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/ abutting each other complete all as specified and directed.

Supply and fixing GI pipe light grade ISI marked of size 40mm bore for cable protection including provision of fitting along GI pipe along wall/ pole/ laid under the road/ floor complete all as specified.

All as per Srl item No. 106.00 here-in-before but medium grade

All as per Srl item No. 106.00 here-in-before but size 50mm bore

All as per Srl item No. 106.00 here-in-before but GI pipe light grade ISI marked of size 50mm bore

Material and labour for earthing of machinery/ equipment with & including galvanized MS earth plate of size 600 x 600 x 6mm thick, buried vertically in ground to a depth not less than 2.25 metre below ground level, with lop edge of earth plate not less than 1.5 below ground level connected to galvanized earth wire 4mm dia connected soldered and riveted to earth plate by means of nuts, bolts , check nuts & washers of galvanized iron or steel all as Shown in electrical plate No. 3 of MES Schedule (Part- I) and connected to panel board, all as specified and testing on completion including provision of earth wire protected by 15mm dia light grade GI pipe upto 7.5 meter from electrode to earth terminal point feeder pillar box including provision of the earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth plate GI light grade watering pipe of 20mm dia with funnel with wire mesh including all necessary excavation & earth work in any type of soil, returning filling in, removal of surplus soil to a distance 50 metre, PCC (1:3:6) type C-1 as in earth chamber, 50mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8mm dia mild steel TMT bar @ 100mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified & shown on drawings & directed

Taking down carefully existing point wiring of any type (i.e. on wooden batten, surface conduit, casing capping or concealed conduit) complete for light, fan socket or power point with fitting Supply and fixing fixtures such as ceiling rose, electric fittings, holders, switches, sockets wooden batten, conduit etc including accessories such as wooden gutties/ rawl plug, screw etc including removing materials from site and making good disturbed surface of walls, floors etc. complete all as specified and directed

Supply and fixing socket out let 5 Amp, 5 pin flush type complete all as specified.

Supply and fixing batton holder ISI marked insulated body complete all as specified and directed.

Material and labour in replacement of submain wiring with two single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 4.00 sqmm 1100 volts grade including and 4.00 sqmm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in existing PVC/ steel rigid conduit complete all as specified. Make: Two run of 4.0 sqmm cable and one run of 4.00 sqmm cable as earth continuity conductor shall be measured & paid as one unit

Material and labour submain wiring with PVC insulated cable copper conductor FRLS two single core 4 sqmm 1100 volts grade drawn through PVC rigid non-metallic PVC conduit including earth continuity FRLS copper conductor 4.0 sqmm PVC insulated with green insulation complete all as specified. Make: Two run of 4.0 sqmm wire and one run of 4 sqmm wires as earth wire through fire proof rigid PVC conduit shall be measured as one run meter.

Material and labour for sheet metal DB for MCBs, SPN, 8 ways, double door, IP-43 company painted with 200 Amps rated bus bar, neutral bar/ connectors, earth bar/ connectors, complete with suitable copper conductor wire, PVC insulated, FRLS type with suitable copper thimbles, lugs etc. complete all as specified and directed.

All as per Srl item No. 116.00 here-in-before but 12 ways

Supply and fixing in repair energy saving tube light luminaries with diffuser LED with comprising with CRCA MS box and 4 feet 18 to 20 watt (min) retro fit tube rod having thermally conductive material Lumen output 2100 lumens (min) 6500 K, power factor more than 0.95,IP-20 class-I protection with inbuilt LED driver, surge protection up to 2 KV, operative on 140 volts to 270 volts AC supply products must be made in India only, complete prewired, connection and testing complete all as specified and directed. Note : (i) Contractor shall be provided 2 years written manufacturer’s warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's.

Supply and fixing exhaust fan, 380mm sweep, 900 RPM, single phase, 230 Volt, heavy duty with louvered shutter including provision of three core copper conductor cable of required length of size 23/ 0.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nuts, bolts & washers, making the hole in wall including necessary civil/ plastering work to match the disturbed surface complete.

Supply and fixing air circulator fan, 450mm sweep, single phase, 230 Volt, heavy duty with louvered shutter including provision of three core copper conductor cable of required length of size 23/ 0.0076 from ceiling rose/ connector to fan terminal, fixing the fan on wall with suitable size of nuts, bolts & washers, making the hole in wall including necessary civil/ plastering work to match the disturbed surface complete.

Supply, fixing, connecting and testing energy efficient (five star rated) electric water heaters vertical storage type of capacity 25 ltrs with powder coated painted body with inner tank and inner assembly made of ultra thick superior cold rolled steel having high density puf insulations with ISI accessories such as thermostat switch having adjustable knob for temperature setting, heating element pressure safety valve, indicators and with ELCB protection complete including fixing of MS bolts, nuts in wall of suitable size complete all as specified

Supply and fixing PVC connection for water heaters with PVC flexible pipe 45 cm long 15mm in size suitable for hot water with 02 Nos connectors and washers complete all as specified and directed.

Supply and fixing steel water tubing galvanised, 15mm bore medium grade, fixed complete to walls, ceilings or in floor etc. of size 15mm dia alongwith sockets, tees, bends, elbows, wall clamps, necessary joining material other accessories required for fixing of pipe with wall/ floor complete all as specified and directed

Supply and fixing stop valves 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete, fixed in repairs, complete all as specified and directed.

Supply and fixing bib tap cast copper alloy chromium plated suitable for 15mm bore iron pipe with long body fancy type complete all as specified and directed.

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 16 Amp 240 V 10 KA complete all as specified and as directed.

Supply and fixing pre-stressed concrete poles LT 09 Mtr long 102mm x 172mm at top and 102mm x 279mm at bottom class-9, complying with requirement of IS-1678-1978 and painting of pole with two coats of synthetic enamel paint with black and white strips of 30 cm each upto 1.5 mtr height from top of PCC coping and numbering of poles complete all as specified and directed. Note: PCC in foundation & coping of poles and earth work to be measured & paid for separately.

Material and labour for PCC (1:3:6) type C-2 using 40 mm graded mechanically crushed stone aggregate as in foundation of stay/ coping of poles including necessary form work and fair finish to exposed surface without using extra cement complete all as specified and directed.

Supply and fixing LED street light luminaire 45 watt in epoxy powder coated pressure die-cast aluminium housing with 5% tolerance with, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, class-1 protection for LED and control gear compartments with high power LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 5700 K (max) and with secondary optics modular independent lenses provided with casing and capping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volts, having efficency 100 lumens/watt. Brand name should be embossed on fixture to ensure India brand only complete all as specified and directed. Notes (i) All LED fitting shall be made in India only. (ii) Contractor shall be provided 2 years written manufacturer’s warranty for the LED fixture complete including driver from the certified date of completion. (iii) Contractor shall be produce LM-79 & LM-80 report of NABL accredited laboratory from manufacturer's local office and certificate of IP-66 and IK-08 from manufacturer

Supply and fixing cross arms, bracings, brazing stiffness, supports clamps and back plated fabricated from structural steel section including nuts, bolts and washers, welding, bending, cold or hot drilling holes of any shape and size as directed including two coat of aluminium paint over a coat of red oxide or primer complete all as specified

Supply and fixing bracket made out of 40mm dia medium grade GI tubing 1.5 metre long and bent to shape at 1050 angle with stiffener on bent portion made out of MS sheet 6mm fixed with clamps, nuts, bolts, washer including painting complete with two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. Note : Clamps, nut, bolts and washers will be measured and paid separately.

Supply and fixing 20mm dia PVC conduit exclusive of boxes (junction/ terminal) but exclusive of all tees, bends, elbows, reducers, bell mouth tubs, ends and fixing, all accessories such as couplers, lock nuts, saddles, pipe clamps etc complete all as specified and directed

Supply and fixing PVC junction box for street/ security light thermoplastic of size 210mm x 310mm x 116mm made of thermoplastic IP 65 suitable for 10 Sqmm to 25 Sqmm cable metric lockout for cable entry and front hinged shutter having aluminium bus bar 200 Amp single phase 2 wire system to connect cable of size 10 Sqmm comprising of MCB 16 Amp (01 No), SP, fixed to pole with MS clamps of size 20 x 3mm nuts, bolts and washers complete all as specified and directed

Supply and fixing wiring for circuit alongwith earth wire with size 2 x 1.5 sqmm + 1x 1.0 sqmm of FR PVC insulated copper conductor, single core cable in surface/ recessed as required including PVC conduit of sizes 15mm dia complete all as specified. Note : Two run of 1.5 sqmm and one run of 1 sqmm cable as earth continuity conductor shall be measured and paid as one unit.

Supply and fixing automatic street light switch comprising of nature switch for automatic switching of street light based on LUX level of natural light or time periodicity (both options) the infrared sensor based nature switch alongwith lighting load of 5 KW single phase power contractor (AC3) 20-25 Amp and MCB SP on both in and outside of rating 25 Amp complete enclosed in outdoor, rust weatherproof and terminate proof FR grade SMC lockable box conforming to IP 54 contractor. MCB and circuit wiring should be 10 sqmm copper wire complete all as specified and directed.

Supply & install high mast pole 12.5 mtr high 12 sided polygon having hot dip galvanising as per IS, tubular structure with BS EN 10025 as per IS-2062, in two section longitudinal and welded in one section with thickness of sheet 3mm top and 3mm bottom, 300mm (approx) base dia and 150mm (approx) top dia suitable for wind velocity as per IS-875 (Part-3) 1987 with lightening protection finial GI with single spike of 1200mm long with accessories, LED type aviation obstructions lights including wiring & connection and including necessary excavation, returning filing, removal of soil from site all and PCC foundation of high mast light as per manufacturer design having door opening of size 900mm x 250mm at base with close fitting door with allen key locking with base plate of size 520mm dia 25mm thick (min) with 06 Nos foundation bolts of M24 and 750mm long with PCD 750mm including lantern carriage of ERW class-B MS pipe NB 40 in round shape 600mm (ID) with 6 arms duly welded having load carrying capacity 6 luminaries and accessories with double drum 2 winch of capacity 350 Kg (SWL) having motorised operation with manual mode with control gear assembly with self-lubricating in permanent oil bath including first fill of lubricant SA-90/140 with two stainless steel wire rope 7/19 of 6mm dia of grade AISI 316 provided with suitable thimbles and terminals with minimum breaking capacity 2350 Kg per rope including integral power tool suitable to operate on AC 440 Volts/ 240 volts electric supply, single speed reversible type and trailing electric cable flexible with stranded copper conductor of size 25 sqmm 5 core having EPR/PVC insulated and PCP/PVC sheath IS marked all as specified and directed

Supply and fixing LED flood light fitting of 120 watt in epoxy powder coated pressure die-cast aluminium housing with, heat resistant toughened clear glass fixed with SS screws controlled with potted CVCC type, BIS marked electronic driver duly enclosed of approved brand only in housing having protection against over voltage, short circuit and open circuit and surge protection against lightening of 5 KV minimum in circuit and 5 KV outside the driver but inside the fixture with IP-66, class-1 protection for LED and control gear compartments with high powder LED chips of rating 2.5 to 3 watt (maximum) with colour temperature 5700 K (Max) with secondary optics modular independent lenses provided with casing and capping to minimize glare and for better distribution of light suitable for voltage band 120 volts to 270 volts having efficacy 100 lumens/ watt all as specified and directed. Notes: (i) Contractor shall provide 2 years written manufacturer's warranty for the LED fixture complete including driver from the certified date of completion. (ii) Contractor shall produce LM-79 & LM-80 Report of NABL accredited Laboratory from manufacturer

Supply and fixing earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of the plate at a depth not less than 1.50 metre below normal ground level, connected with and including GI strip 32mm x 6mm in and including GI pipe 50mm bore light grade as protection pipe (from top of earth plate up to the test point) by means of GI bolts, nuts, check nuts and washers of GI and thimbles, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick, all around including top and bottom and watering pipe 20mm bore of GI pipe medium grade with funnel and wire mesh, PCC chamber of size 300x300x300mm(top of chamber minimum 15 cm above the normal ground level (1:3:6) using 20mm graded stone aggregate and RCC cover (1:2:4) type B-I using 20mm graded crushed stone aggregate of 25mm thick with 2 Nos MS handles of 12mm dia including necessary excavation/ earth work in any type of soil/rock and as shown in Electrical plate No. 3 of SSR Part-I (2009) testing on completion complete all as specified. Note: If result is not achieved satisfactory, contractor will have to do re-earthing at his own cost. Nothing shall be paid extra on this account

Supply, install, testing and commissioning of feeder pillar, outdoor cubicle type weather and vermin proof totally enclosed made out of 3 mm thick CRCA sheet machine pressed of not less than 60cm x 50cm x 40cm, suitable to operate on 3 phase 4 wire system, 415 volts, 50 Hz with locking arrangement, bottom gland plate with sufficient numbers of circular cable entry holes, prewired complete duly powder coated comprising with MCB TPN 32 Amp, C Curve, 415 volts - 01 Nos., MCB SP 10 Amp, C curve - 04 Nos, astronomical timer - 01 No., 4 pole contactor 415V/ 230V - 01 No, rotary switch of motor for moving up / down the lantern carriage - 01 No. with supporting legs of angle iron of size 40 x 40 x 6mm of length 100 cm long having apron on three sides of panel duly grouted in PCC (1:3:6), 50cm below ground level and 50 cm above ground complete all as specified.

Supply and fixing MCCB enclosure, outdoor type, including MCCB 40 Amp, 16 KA, 4 pole on wall / panels complete all as specified and directed

SANDEEP JHANJI CONSTRUCTIONS

NIRMAL SINGH

M/S Vinod Kumar

nitin trading company

UNITED ENGINEERING CORPORATION

JAGDISH SINGH AND CO

PAUL CONSTRUCTION CO.

NATIONAL BUILDERS

siddharthenterprises