Renovation of Rani Laxmi Bai Girls Hostel

Amount

15mm Cement plaster in single coat on the Rough/Fair side of brick/ concrete/ stone walls for interior plastering including arises, internal rounded angles, chamfers and/or rounded angles exceeding not 80mm in girth and finished even and smooth up to all heights including all lead & lifts: a) Cement mortar 1:6 (1 cement:6 sand).

Repair to plaster in patches of 2.50 squre metre and under10 to 15mm thick including cutting the patch in proper shape and replastering the surface of the wall including disposal of rubish to the dumping ground with in all leads & lifts. a) cement mortar 1:6

Applying priming coat on new concrete/masonry/asbestos cement/ plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with : a) Ready mixed primer

Finishing wall with weather proof exterior grade emulsion of approved design(Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete upto all height

Painting one coats (excluding priming coat) on previously painted steel and other metal surface with enamel paint brushing to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stopping . a) Enamel paint other than white.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete upto all height.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.

Painting two coats (excluding priming coat)on new concrete masonry/plaster surfaces with ready mixed paint brushing for use on floors to give an even shade including cleaning the surface of all dirt, dust and other foreign matter and sand paperingas required with: a)Paint other than white.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth. Priming coat with distemper primer.

Providing wood work in frames of doors, windows, clerestory, windows and other and other frames wrought, framed and fixed in position: a) 2nd class deodar wood.

Providing and fixing paneled glazed or paneled and glazed shutters for doors window and clerestory windows including black enameled iron butt hinges with necessary screws: a) 40mm thick i)2nd class deodar wood.

Providing and fixing 19mm thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc. complete).

Providing and fixing oxidized M.S Sliding door bolts bright finished or/and black enameled with nuts and screws etc. complete. a)250 x 16 mm

Providing and fixing Aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etc. complete. a)150X10 mm

Providing and fixing oxidized M.S. hasps and stapples (safety type) with necessary screwsetc. Complete. a)115mm

Providing and fixing Aluminium Handles Anodized transparent or dyed to required colour or shade with necessary screws etc. complete: a)100 mm.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint: a) In gratings, framed guards, bars, ladders, railings, bracket and similar works

Providing and fixing M.S.BP Sheet 1.66mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely).

Painting two coats (excluding priming coat) on new steel and other metal surface with enamel paint to give an even shade includingcleaning the surface of dirt, dust and other foreign matter, sand papering and stopping a) Enamel paint other than white.

Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces with enamel paint to given and even shade including cleaning of all dirt, dust and other foreign matter sand papering and stopping a.) Enamel paint other than white.

Extra over for every sub-sequent coat of paint: a.) Enamel paint other than white.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting. a)Ready mixed paint brushing wood primer pink.

Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and Stopping. a) Enamel paint other than white.

Cement concrete flooring 1:2:4 (1 Cement:2 Sand:4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement: a) 50mm thick.

Providing and fixing on wall face PVC(D-Plast) Rain Water Pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete including scaffolding upto all height. a)150mm dia pipe

Providing and fixing on wall faces PVC (D-Plast) Accessories for rain water pipes including filling the joints with approved adhesive complete including scaffolding upto all height. a) PVC Plain bend 150mm dia.

Providing and fixing M.S.holder bat clamps of approved design to C.I. or S.C.I pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4:mix (1 cement 2 sand 4 stone graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the wall and fixing with fastener. a) 150 mm dia metre for C.I. pipe

Supplying and fixing glass panes with putty and nails including removal of brocken galss panes wherever necessary: Plain glass 4mm thick.

Providing and fixing partical board ceiling of approved quality with butt jointing and nail (frame work and cover fillets to be paid for separately. a) Cement bonded particle board. i)8 mm thick.

Dismantling tiled floors laid in mortar upto floor two level including stacking of serviceable materials and disposal of un-serviceable materials within all lead (wooden/concrete joists to be measured and paid for separately) a) For thickness of tiles upto 25mm

White glazed tiles 6mm thick in skirting risers of steps and dado 12mm. thick cement mortar 1:3 (1 cement:3 sand) and jointed with cement slurry.

Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement:3 sand) laid over and jointed with grey cement slurry mixed withpigment to match the shade of granite stone i/c rubbing and polishing complete.20mm thick.

Extra for making moulded nosing in terrazzo including returned mouded ends and angles to mouldings.

Painting two or more coats on G.I. sheets with readymix paint of approved brand and manufacture on new work to give an even shade. a) Readymixed paint Red shade.

Providing Scaffolding for all kind of works in multy story building upto all floor height/level bamboo complete tiled with rope on joints and pedestal of CGI Sheet etc. In all respect including carriage of materials in all leads and lifts as per direction of the Engineer-in-Charge.

Extra over every subsequent coat of paint. a) Enamel paint other than white.

Aditya Jaiswal

AJAY SHARMA

SUDHEER THAKUR

Udit Sharma

Anil Parsad

Kaku Ram

SUNIL KUMAR MEHTA