Provision of storage shed at BSO Yard, provision of geysers and desert coolers in JCO single living Accn and special repair to technical building at Old Cantt Allahabad.

Amount

Surface dressing notexceeding 30 cm deep and averaging 15 cm deep and getting out soft / loose soil, complete all as specified and directed.

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sq m on plan and not exceeding 1.5 m in depth and getting out in soft / loose soil, complete all as specified and directed.

Returning, filling in soils, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick. complete all as specified and directed.

Removing surplus excavated material (soils) to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point. complete all as specified and directed.

Cement concrete 1:4:8, type D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified and directed.

Brickwork with flyash bricks, old size straight or curved on plan exceeding 6metre mean radius, built in CM 1:6, complete all as specified and directed.

Reinforced cement concrete, 1:2:4 type B1 (20mm graded stone aggregate) (nominal mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

Reinforced cement concrete (nominal mix) in 1:2:4 type B1 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts, complete all as specified and directed.

Reinforced cement concrete, 1:2:4 type B1 (20mm graded stone aggregate) (nominal mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed.

Mild steel TMT bars 10mm dia and over, as in reinforcement, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Mild Steel TMT bar 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.

Formwork to rough finished sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished square, rectangular or polygonal surfaces of concrete, complete all as specified and directed.

Formwork to rough finished sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and directed.

Steel rolling shutters, 1.25mm thick, gear operated type with bevel gear box and crank handle, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type with locking arrangement, complete all as specified and as directed.

Supply only ball bearing suitable for rolling shutters, complete as specified and directed.

Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering / cladding to wall, projection of window / door opening fixed with self tapping screws as specified, complete all as specified and directed. NOTE:- Sheet shall be fixed by manufacturer only and the colour of sheet and corrgation shape shall be different on roof and its projection and shall be all as directed.

Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering, ridge, hip valley,cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed. NOTE:- The width of ridge shall be 300mm on either side.

Rolled mild steel as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., sttel section shall be conforming to Fe 410-W (Gde- E- 250) quality-A, complete all as specified and directed.

Fibre glass (2mm thick), reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and directed.

Sand filling, using natural river sand, under floors or in foundations including watering and consolidation, complete all as specified and directed. NOTE:- The quoted rate shall deemed to be inclusive of wastage and bulkage

Pre-construction anti termite treatment to backfill of foundation with emulsion @ 7.5 litre of emulsion per square metre of area, complete all as specified and directed.

Pre-construction anti termite treatment of the top surface of filled earth of floor and below plinth protection at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and directed.

Treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed.

Hardcore, of broken stone or boulders, of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.

Plain cement concrete 1:4:8, type D2 (using 40mm graded stone aggregate), in sub-bases of floors, 75mm thick, complete all as specified and directed.

Cement concrete 1:2:4, type B1 (20mm graded stone aggregate) in base course of floors, 40mm thick, finished even and smooth without using extra cement , complete all as specified and directed.

Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors and pavings, and finished even and smooth, complete as specified and directed. NOTE:- The quantity of metallic floor hardener shall be measured as Supply only under respective item of this Schedule.

Supply only metallic floor hardner as approved, complete all as specified and directed.

Plain cement concrete 1:3:6, type C2 (using 40mm graded stone aggregate), in plinth protection, 75mm thick, complete all as specified and directed.

Supply only liquid integral water proofing Admixture, complete all as specified and directed. NOTE:- The liquid integral water proofing admixutre shall be used all as per manufacturers instructions.

Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces of walls, finishing the surface even and smooth with out using exta cement, complete all as specified and directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of walls, mixed with liquid water proofing compound, finishing the surface even and smooth with out using exta cement, complete all as specified and directed. NOTE:- The quantity of water proofing admixture shall be measured as Supply only under resepctive item of this Schedule. The same shall be used all as per manufacturers instructions.

Preparation of newly plastered surfaces of wall and applying three coat of white wash, complete all as specified and directed.

Steel ventilator with top hung shutter including box type hinges, steel peg stay, complete with glazing bars, doventailed or welded, complete all as specified and directed.

Sheet glass, 3mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.

Preparation of new surfaces of steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Preparing new plastered surfaces of wall and applying two coats of cement base paint over a coat of external grade wall care putty of thickness not exceeding 1mm, complete all as specified and directed.

PCC 1:3:6 type C-2 (using 40mm graded crushed stone agg) as in surface channels and drains complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc., complete all as specified and directed. NOTE:- Inner girth of drain shall only be measured and paid.

Add or deduct from Sl. Item No. 40.00 here-in-before for each 25mm girth or part thereof over or under 30cm inner girth, complete all as specified and directed. NOTE:- This item shall only be operated as per the requirement at site.

Dismantling unframed timber scantlings 40 sq. cm and over in section, including removing bolt, nut, etc in any position, complete all as specified and directed.

Second class hard-wood in scantlings, clean sawn timber fixed as girder, lintels, wall plates, joist, purlin, rafters etc., complete all as specified and directed.

Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified and directed.

Plain cement concrete type B-1, 1:2:4 (20mm graded agg), 25mm thick, as in base course, finished surface rough to receive top layer of floor finish, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Demolition of Cement Concrete (un-reinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level), complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed.

Vitrified Ceramic tiles 10 mm thick (square/ rectangular), light coloured, polished, size of tiles shall be 600mm x 600mm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Non-skid Ceramic tiles, joint free type, 7 to 8 mm thick (square / rectangular), size of tiles shall be 400mm 400mm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

Glazed coloured ceramic tiles, size of tiles shall be 450mm x 300mm x 7mm thick, as in vertical surfaces such as skirtings / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tile, with and including provision of 10mm thick in CM 1:4, complete all as specified and directed.

Paver tiles, vitrified, exterior grade, coloured, flooring tiles of 300mm x 300mm size, laid in floors with cement based adhesive, set and jointed as per manufacturer's instructions over and including provision of 15mm thick screed bed or bedding layer in CM(1:6), complete all as specified and directed. MAKE:- Orient bell Ltd Cat No. Checkers Teracotta (16513) or techno-commerically equivalent in any of the makes as approved by GE.

Demolition of brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed.

Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM 1:4, complete all as specified and directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces of walls, mixed with water proofing compound, finishing the surface even and smooth with out using exta cement, with and including taking down cement plaster on bricks or concrete surfaces of any description, complete all as specified and directed. NOTE:- The quantity of water proofing admixture shall be measured as Supply only under resepctive item of this Schedule. The same shall be used all as per manufacturers instructions.

Preparation of new surfaces of walls and applying two coat of acrylic emulsion distemper over a coat of chalk whitening, complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coat of plastic emulsion paint over a coat of primer over 2mm thick wall care putty, complete all as specified and directed.

Complete removal of existing surface of wall by scrapping, rubbing, washing the old surface of wall including the preparation the surface smooth using 2mm thick wall care putty and applying two coat of acrylic emulsion distemper over a coat of primer on walls, complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connections, including cleaning for refixing or removal to store all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore and fixed complete to walls and ceiling or laid in floor, with and including making holes in RCC slabs for vertical pipes and making good the same with cement concrete (1:2:4) to match with the exsiting surfaces, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore and fixed complete to walls and ceiling or laid in floor, with and including making holes in RCC slabs for vertical pipes and making good the same with cement concrete (1:2:4) to match with the exsiting surfaces, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 20mm bore, complete all as specified and directed.

Vitreous china wash basin, with full pedestal of size 830mm x 560mm x 480mm, white, flat back size excluding tap but including brackets complete all as specified and directed. MAKE:- Parryware Cat No. ARS-WHT-1509 or techno-commercially equivalent model in Jaguar or Cera.

Viterous China white wash down coupled water closet of size 800mm x 365mm x 650mm including PVC soft seat cover, white and wash down water closet 690mm x 350mm x 740mm, including flush pipe and PVC soft seat cover, white, complete all as specified and directed. MAKE:- Jaguar Cat No. ARS-WHT-0313 or techno-commercially equivalent in model in Parryware or Cera and Parrryware Cat No. C849E or techno-commercially equivalent in model in Jaguar or Cera.

Mixer tap basin mixer without popup waste system with 450mm long copper pipes and brass nut, complete all as specified and directed. MAKE:- Jaguar Cat No. FLR 5169NB or techno-commerically equivalent model in any make as approved by GE.

Towel ring 200mm dia, Chromium plated, complete all as specified and directed. MAKE:- Jaguar Cat No. ACCN-1121BN or techno-commercially equivalent model in Parryware or Cera.

Stop / Angle valve, 15mm dia, fancy type, CP, with long shank and cup (concealed type) etc, complete all as specified and directed. MAKE:- Jaguar Cat No. FLR-5053N or techno-commercially equivalent model in Parryware or Cera.

Toilet paper holder with stainless steel flap fixed to wall etc, complete all as specified and directed. MAKE:- Jaguar Cat No. CAN-1153S or techno-commercially equivalent model in Parryware or Cera.

Soap dish, fancy type, CP, complete all as specified and directed. MAKE:- Jaguar Cat No. 1131N techno-commercially equivalent model in Parryware or Cera.

PVC connections 15mm size, of length 450mm, PTMT nuts, complete all as specified and directed.

Hand shower (Health faucet) with 8mm dia 1.20m long flexible tube and wall hook with NRV including fixing bracket, complete all as specified and directed. MAKE:- Jaguar Cat No. ALD-577 or techno-commercially equivalent model in Parryware or Cera.

Grating of 100mm dia, CP, fixed with coloured cement joint to match the existing surface of tile, complete all as specified and directed.

6mm thick frame less rounded edge looking mirror, area not excluding 1sq.m each pan in any shape, fancy type, fixed to wall with CP screw and decorative bolt, complete all as specified and directed.

Kitchen sink with drainage board made of stainless steel 1mm thick with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, fixed in repair etc, complete all as specified and directed.

Brass chromium plated shower rose 125mm size with swivel joints, any size, including fixing to 15mm GI pipe or union, complete as specified and directed.

Tubular towel rail, 20mm dia, D type, 60cm long between flanges, complete all as specified and directed.

Long body bib cock 15mm bore with wall flange, fixed in repairs, complete all as specified and directed. MAKE:- Jaguar or techno-commercially equivalent in Parryware or Cera.

Rotational moulded HDPE water storage tanks (cylindrical vertical with closed top), 500 litre capacity (ISI embossed), double layered, hoisted and fixed in position including connecting up pipes including ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed from iron pipe and fixed for 20mm bore size (minimumu weight 210gms), complete all as specified and directed.

Ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20mm (minimum weight 210 gram), fixed in repairs, complete all as specified and directed.

Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, 20mm bore, complete all as specified and directed.

UPVC (SWR) pipes 110mm dia single socketed in any length with rubber gasket cup washing, jointed and laying in trenches or floor including dismantling and taking down of existing pipes of any type, complete all as specified and directed.

UPVC (SWR) bends of any radius, suitable for 110 mm bore pipes with one end fixed to pipes and another end fixed to pipes with solvent, complete all as specified and directed.

UPVC (SWR) juncton, single 'T' equarl or unequal, suitable for 110 mm bore pipes, jointed with cement solvent, complete all as specified and directed.

UPVC (SWR) pipes 75mm dia single socketed in any length with rubber gasket cup washing, jointed and fixed to walls or laid in floor including dismantling and taking down of existing pipes of any type, complete all as specified and directed.

UPVC (SWR) pipes 75mm dia single socketed in any length with rubber gasket cup washing, jointed and laid in trenches including dismantling and taking down of existing pipes of any type, complete all as specified and directed.

UPVC (SWR) 75mm bore floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.

UPVC (SWR) bends ISI marked of any radius suitable for 75mm bore pipes, jointed with cement solvent, with access door, complete all as specified and directed.

UPVC(SWR) vent cowl, 75mm bore, complete all as specified and directed.

UPVC (SWR) reducers 110 / 75mm bore, larger bore to be measured, fixed in pipe complete all as specified and directed.

Salt-glazed stoneware gully traps, square 150mm x 150mm or round mouthed, type 'S', complete all as specified and directed.

Taking down chowkats or frames not exceeding 1.5sq.m each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5sq.m but not exceeding 4sq.m each with shutters (without taking off shutters from the frames), complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side of wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, suppling & fixing in opening as per specification & drawing, complete all as specified and directed.

Second class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed.

Flush shutters, 30mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides fixed with screw and edge of door cover with decorative wooden bead, complete all as specified and directed.

Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.

French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with three or more coat including finishing surface shiny and smooth, complete all as specified.

Butt hinges, medium weight, cold rolled mild steel, and fixed, 100mm long, complete all as specified and directed.

Extruded brass handles, fabricated type polished 150mm long of fixed to door shutter complete all as specified.

Brass barrel tower bolts 150mm long, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed.

Brass, sliding door bolt (300mm long) with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed.

Floor door stopper (140mm long) of brass body and tongue of steel spring, fixed in floor, complete all as specified and directed.

Sheet glass, 4mm thick, ordinary quality and glazing in squares not exceeding 0.5 sq. m in each pane with oil putty, complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed and repairs, complete all as specified and directed.

Door closer hydraulically regulated, Aluminium die cast, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed, complete all as specified and directed.

Aluminium drapery rod, powder coated, 30mm inner thickness, fancy tyoe including curtain ring, brackets and fixed to wall, complete all as specified and directed.

Towel rack 600mm long, CP, with bottom hook, complete all as specified and directed.

Anodized aluminium door frame with shutter having with door frame of section 62.5 x 44x 2.5mm thick & shutter with bottom and middle rail of section 112 x 44 x 2.5mm thick and styles & top rail of section 83 x 37 x 2.5mm thick with centrally locking arrangement with lock made of 'GODREJ' or 'LINK' 7 lever and self closing device with rebate including joining cleats, fixing of builders hardware fittings, necessary numbers of floor spring and glazing with 5.5mm thick ordinary plain glass including necessary fittings, fixtures & auminium snap beads complete all as specified and directed.

Aluminium window with aluminium anodized frame of aluminium section 62.5 x 37 x 1.5 mm thick with shutters having styles & rails of aluminium section 47.62 x 44.45 x 1.5 mm thick including jointing cleats, glazing clips, rubber packing, aluminium snap beading, screws anodized aluminium fittings such as hinges, tower bolts, handles etc. including 5.5 mm thick ordinary plain glass, aluminium designer grill and stainless steel wire mesh 0.36mm dia 1.40mm aperture etc complete all as directed.

Preparation of old plastered surfaces of walls incuding cornices and pilasters etc. including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one of weather-proof antifungal exterior emulsion paint, complete all as specified and directed. NOTE :- The quoted rate shall deemed to be inclusive of the following : (i) Use of all scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. (ii) Removing of nails, making good holes, cracks, etc. (iii) Work in patches, and in narrow \widths. bands, cornices, pilasters, etc. and cutting in edges to line, where necessary. (iv) Spreading and removing coverings to doors, windows, floors, fittings, etc., to protect them from splashes. (v) Removing and replacing furniture, movable cupboard, chicks, blinds, etc. (vi) Washing floors, cleaning glass, joinery, electric fittings, wiring, etc. of drops and splashes and leaving premise, clean and tidy.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, complete all as specified and directed.

Cast-in-situ 12mm thick Plaster of paris false ceiling with GI framed work including all necessary drilling, cutting to fix electric items and making grid or designed ceiling, moulded edge, complete all as specified and directed with following:- (a) GI Grid channel 30 x 25 x 20 mm of guage fixed with rawl plug and screw 450mm C/C along with perimeter walls. (b) GI Channel made of shape 50x40x40mm of 24 guage plced @600mm C/C from perimeter at wall except long wall(In one span). (c) GI intermediate runners of size 45x10x10mm of 24 guage fixed 1200mm C/C leaving frame of one side wall except long wall. (d) GI 20mm grid wire mesh 20mm guage suspended fixed with stel fastener to recieve pop finishing as reinforcement of POP. (e) 12mm thick POP smooth finished as directed design and finished with 2 coat of oil bond distenoer ay shed over a coat of primer.

E- board ( designed lack and hill) of size 605mm x 605mm x 4mm thick, white prelaminated set, embossed reinforced designer ceiling board tiles of approved texture at all height laid on hot dipped galvanised iron imposed grid with 24mm wide T-section (white powder coated); the framework shall comprises of main runner made of 0.33mm thick GS sheet and of size 24mm x 32mm x 300mm and spaced at 1200mm (maximum) centre-to-centre, hangers of GI wire 4mm dia wire to be fixed by approval rawl plug level and fastener and screws etc. the lase hanger at the end of each main runner shall not be greater than 450mm from adjacent wall, ; flush fitting of 1200mm long cross tee (double section) to be interlocked between main runners at 600mm centre-to-centre to form 1200mm x 1600mnm modules, cross tee longer than 600mm to be supported independently, Tee perimeter wall angle shall be made out of 0.45mm thick GS sheet of size 19mm x 19mm and 300mm long of white colour, all as per manufacturers specifications, complete all as specified and directed. MAKE:- Rasshree, Polytuff, Armstrong NOTE:- Material shall be fixed by manufacturer only

Electric water heater (Geyser), storage type, of capacity 25 litre, BEE 5-star rated, PUF insulation, adjustable knob for temperature setting, with and including provision of heavy duty PVC connection pipe 600mm length with bronze nuts suitable for hot and cold water pipe lines and fixing to existing water supply lines, complete all as specified and directed. MAKE:- Crompton Greaves Model: Imperial series Cat No. SWH925 or techno-commercially equivalent model in Havells / Bajaj

Sub main wiring complete with 2 runs of 6 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of rigid PVC conduit 25mm dia including conduit accessories and connecting terminal ends to DB's including providing 1 run of 6 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, including making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 6 sq.mm copper conductor, one run of 6 sq.mm copper earth continuity conductor and one run of rigid PVC conduit and conduit accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

Point wiring complete with 2.50 sq.mm PVC insulated unsheathed multi-stranded FR copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc, including provision of 1.60mm thick factory made pressed steel terminal box of required size, duly painted both inside and outside with two coat of black bituminous paint over a coat of red oxide primer, duly covered with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 2.50 sq.mm PVC insulated unsheathed multi-stranded FR copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for security light fittings and for 3-pin 15Amp socket, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing

Single pole and neutral enclosure (240 V) with a two pin and earth plug and socket complete with one single pole MCB 20A class B 10 KA, complete all as specified and directed.

Switch piano, flush type single pole, one way 15 Amp all as specified and directed.

PVC connection cotton braided heavy duty with brass union/coupling of length 450mm with rubber, washers suitable for 15mm pipe, complete all as specified and directed. .

Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, laid in trenches, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 50mm bore, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, laid in trenches, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 40mm bore, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, laid in trenches, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 25mm bore, complete all as specified and directed.

GI tubing medium grade, galvanised with all fittings including short lengths, laid in trenches, fixed to ceilings and walls with and including provision of suitable size of clamps or laid in floors, complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps, plugs and unions etc.,), 15mm bore, complete all as specified and directed.

Stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, 15mm bore, complete all as specified and directed.

Sheet metal enclosure for double door DBs when MCBs to be used SPN 8 way with 200 Amps rated bus bar complete with incoming/outgoing connection through proper size of lugs, complete all as specified and directed.

MCB SPN double pole 32 Amps, 230 volts, 'C' curve, 10kA breaking capacity, all as specified and directed.

MCB SP 6 - 32 Amp, 230 Volt, 'C' curve, 10KA breaking capacity, complete all as specified and directed.

Supply, installation, testing and commissioning of desert cooler, electric driven (single phase) having approximate normal air flow of 5000 cu.m per hour, alongwith provision of suitable accessories as required for sucessful working of cooler, complete all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks or supporting stand for desert coolers etc., and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

Point wiring complete with 1.5 sq.mm PVC insulated unsheathed multi-stranded FR copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc, including provision of 1.60mm thick factory made pressed steel terminal box of required size, duly painted both inside and outside with two coat of black bituminous paint over a coat of red oxide primer, duly covered with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 1.5sq.mm PVC insulated unsheathed multi-stranded FR copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for one light point controlled by one 5 Amp one-way switch, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing

Switch piano, flush type single pole, one way 5 Amp 230 volts all as specified and directed.

Socket outlet 5 pin, 5 Amps flush type, complete all as specified and directed.

Ball valve high pressure PTMT with epoxy coated aluminium rod and high density plastic ball secured for iron pipe of dia 20mm (minimum weight 210 gram), fixed, complete all as specified and directed.

All as per Sl. Item No. 135.00 here-in-before but for 3-pin 5Amp socket outlet point on independent board

All as per Sl. Item No. 135.00 here-in-before but for one 3-pin socket oiutlet 5 Amp on same board alongwith other switches

Socket outlet 3 pin, 5 Amps flush type, complete all as specified and directed.

Socket outlet 3 pin, 15 Amps flush type, complete all as specified and directed.

Ceiling rose of suitable size of bakelite 240 volts three terminals as specified and directed.

Lamp holder, PVC polycarbonate body with back plate suitable for batten fittings, complete all as specified and directed.

Electronic fan regulator, medium, 5 step type 80/100 Watt, 240 V, AC, complete all as specified and directed.

Sub main wiring complete with 2 runs of 4 sq.mm PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable drawn through and including provision of rigid PVC conduit 25mm dia including conduit accessories and connecting terminal ends to DB's including providing 1 run of 4 sq.mm PVC insulated unsheathed multistranded FRLS grade copper cable as earth continuity conductor and connecting to common earth dolly, including making good disturbed surfaces to match with existing, complete all as specified and directed. NOTE:- (i) Two runs of 4 sq.mm copper conductor, one run of 4 sq.mm copper earth continuity conductor and one run of rigid PVC conduit and conduit accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive of the same accordingly.

LED wall mounted tube light fitting, 1x20W, LED 6000K, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. MAKE:- Cat No.LHEXBLP7PN1W020 E-LITE LED pride plus of Havells or techno-commercially equivalent model in Philips / Crompton

Sheet metal enclosure for double door DBs when MCBs to be used SPN 4 way with 200 Amps rated bus bar complete with incoming/outgoing connection through proper size of lugs, complete all as specified and directed.

MCB SP 10 Amp, 240 Volt, 'B' curve, 10KA breaking capacity, complete all as specified and directed.

Earthing complete with GI earth plate electrode 600mm x 600mm x 6.3mm thick buried directly in ground vertically to a depth of not less than 2.25m deep below ground level with the top edge of earth plate at a depth of not less than 1.5m below ground level connected to GI earth lead of 4mm dia by means of bolts, nuts, washers of galvanised iron or steel, GI earth wire shall be protected by 20mm dia GI pipe 'medium grade', watering pipe 20mm dia GI pipe 'light grade', GI wire meshed funnel, alternate layer of charcoal and salt on all side to earth plate upto a thickness of 150mm, filling of black cotton soil in earth pit upto GL and connected to earth plate including necessary excavation & earthwork, PCC (1:3:6) type C-1 earth chamber, 40mm thick RCC cover (1:2:4) mix with 6mm dia nominal reinforcement @ 150mm c/c both ways etc complete all as shown in electrical plate No.3 connected to earthing test point, including testing on completion, complete all as speciifed and as directed. NOTE:- (a) Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. (b) If earth resistance is not found satisfactory, till satisfactory test result comes, the same shall be redone by the contractor without any extra cost to department.

Taking down point wiring of any type, size and description on teak wood batten/ through pipes/ casing capping (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and making good disturbed surfaces of walls, floors, etc. to match with the existing, complete all as specified and directed.

Taking down main switches, DBs, cut-outs of any type alongwith existing boards and removing the same from site and making good disturbed surfaces of walls to match with the existing, complete all as directed by Engr-in-Charge.

Taking down carefully submain wiring of any type and size including earth wire on wooden batten / surface conduits / casing and caping etc., and removing the same from site and making good disturbed surfaces of walls to match with the existing, complete all as specified and directed.

Point wiring complete with 4 sq.mm PVC insulated unsheathed multi-stranded FR copper conductor 1100 Volts grade, ISI marked, drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc, including provision of 1.60mm thick factory made pressed steel terminal box of required size, duly painted both inside and outside with two coat of black bituminous paint over a coat of red oxide primer, duly covered with 2.8mm thick prelaminated sheet cover of colour as approved and duly concealed in walls for housing switches, sockets, regulators etc., including 4 sq.mm PVC insulated unsheathed multi-stranded FR copper conductor cable as earth continuity conductor and connecting to common earth dolly, complete all as specified and directed for security light fittings and for 3-pin 15Amp socket, complete all as specified and directed. NOTE:- (i) The quoted rate shall deemed to include the cost of pressed steel terminal boxes, prelaminated sheet cover etc. (ii) Quoted rate shall also deemed to include cost of making necessary chases in walls for inserting metal boxes and making good the disturbed surfaces to match with existing

Bell push flush type 5 Amps 240 Volt capacity, complete all as specified and directed.

Electric bell ding dong type AC 230 Volt 50 hz single pole, complete all as specified and directed.

Sheet metal enclosure for DBs TPN, 4 way, double door, 415 V with 200 Amps rated bus bars single door type complete with incoming/outgoing connection through proper size of lugs, complete all as specified and directed.

MCB SP 6-32 Amp, 240 Volt, 'B' curve, 10KA breaking capacity, complete all as specified and directed.

Exhaust fan 230 Volt 50 Hz single phase AC supply, 230 mm sweep with louvers complete with metal body powder coated with protective steel bird guard on wall of building with and including provision of 3 core 1.5 Sq.mm flexible cable from ceiling rose to exhaust fan including writing MES number on exhaust fan motor using synthetic enamel paint of approved tint, including making necessary holes in masonry walls and making good the disturbed surfaces to match with the existing, complete all as specified and directed. MAKE:- Model: Ventil Air-DS of Havells or techno-commercially equivalent model in Almonard / Bajaj / Usha / Khaitan.

Removing existing electric meters, cleaning throughly meter panel, painting with one coat of approved enamel paint smoke gray colour, Supply and fix plywood sheet duly varnished 6mm thick, making necessary hole for leading wires, fixing electric meters on this sheet, connecting with wire duly ferruled, marked Qtr Nos. with white paint on resopective meters, complete all as specified and directed.

Taking down existing servicable ceiling fan / exhaust fan keeping in safe custody cleaning & servicing the fan including painting two coats with synthetic enamel paint & marking MES No., and refixing in same position as directed, including replacement of three core sheathed copper flexible cable from ceiling rose to fan, complete all as specified and directed.

LED wall mounted tube light fitting, 1x18W, LED 6000K, decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. MAKE:- Cat No. LHEXBHP7IN1W018 of Havells or techno-commercially equivalent model in Philips / Crompton

Wall light fitting brass made bracket with round base required having brass holder and brass gallery with glass suitable for 5 to 11 watts CFL/ 3 to 5 watts LED bulbs including lamp, complete all as specified and directed.

LED bulk head light fitting, 10W, 600lumen, enclosed in polycarbonate body, weather proof, fixture with co-extruded polycarbonate body, environmental friendly, energy efficient, complete with all accessories, pre-wired and making connection with and including provision of three core flexible copper cable of size 23/0.0076 from ceiling rose to connector of required length including LED lamp, complete all as specified and directed. MAKE:- Cat No. HEXAFT10WLED857SSY MBOPC of Havells or techno-commercial equivalent model in Crompton / Wipro / Philips

Security LED light fitting 25Watt, IP-65 protection pressure die-cast aluminium body, heat resistant glass, including driver and making necessary electric connection with 2.5sq.mm twin core copper wire 1.50metre long complete fixed to and including provision of GI pipe light grade bracket 1.20metre long and bent to shape required and fixed with suitable FI 40mm x 6mm clamp two Nos with nuts, bolts and washers as required, complete all as specified and directed. MAKE:- Cat No. LR02-291-XXX-57-XX of Wipro or Cat No. BRLEP25W LED WH of Bajaj or Cat No. ASTRAL LSTS 25CDL of Philips or techno-commercially equivalent model in CG

Sheet metal enclosure for DBs TPN, 4 way, double door vertical, 415 V with 200 Amps rated bus bars, with and including provision of MCCB of 160A TPN Breaking capacity 25 KA with thermal magnetic release as incomer and 6 Nos MCB single pole 6 to 32 Amp, 'B; series, 10kA breaking capacity as outgoing, complete all as specified and directed.

MCB SPN 32 Amp, 240 Volt, 'B' curve, 10KA breaking capacity, complete all as specified and directed.

Sheet metal enclosure for double door DBs when MCBs to be used SPN 230V 8 way with 200 Amps rated bus bar complete with incoming / outgoing connected through proper size of lugs complete all as directed.

Hi-Tech Constructions

M/S Rajani Singh

KRISHNA BAHADUR

AMARDEEP ENTERPRISES

Airways Enterprises

sethi tradres

chauhan construction

M/S SS Tarders