Construction of Sub Division office for Mechanical Engineering Department at Maitra Ramban in Distt. Ramban.

Amount

Earh work in excavation by manual means over areas ( exceeding 30 cm and up to 1.5 mtr in width and 1.5 mtr in depth as well as 10 sqm on plan ) incl. disposal of excavated earth up to 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in AKS 70% OR 30%

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. ( Not exceeding 1.5 mtr in width ) and for shafts , wells, cesspits and the like not exceeding 10sqm on plan, depth upto1.5 mtr including disposal of excavated earth up to 1 mtr from cutting edge, disposed earth to be levelled and neatly dressed in

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level 1:4:8 (1 cement: 4 fine sand : 8 graded stone aggregate 40mm nominal size) including all carriage

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work up to plinth level 1:3:6 with 20% boulders.( 1 cement :3coarse sand :6 graded stone aggregate 20 mm nominal size) Crushed including all carriage

Provinding and laying in position, specified grade of reinforced cement conc. excluding the cost of centering, shuttering, finishing and reiforcement. All work up to plinth level. 1:1.5:3 (1 cement:1.5 coarse sand :3graded stone agg. 20 mm nominal )

Brick work with common burnt clay F.P S ( non modualar) bricks of class designation 75 in foundation and plinth cement mortar 1:6 (1 cement :6 fine sand including all carriage

Extra for brick work in super structure above plinth level lupto floor V level.

Reinforced cement concrete work in walls ( any thickness) including attached pilaster buttressess, plinth and string courses , fillets , columns, pillars , piers, abutments, posts and struts , etc up to floor five level excluding cost of centring shuttering finishing and reinforcement 1:1.5:3 (1 Cement : 1.5 coarse sand :3 graded crushed stone aggregate 20 mm nominal size),

Reinforcement for RCC work including straightening,cutting bending, placing in position and binding all complete upto plinth level Thermo Mechanical Treated bars.

12 mm cement plaster of mix 1:4 (1 cement :4 fine sand ) including all carriage

6 mm cement plaster to ceiling of mix 1:3 fine sand )

Centring and shuttering including strutting propping etc. and removal of form for :-Foundations, footings, bases of columns etc for mass concrete

Suspended floors, roofs, landings, balconies and access platforms.

Edges of slabs and breaks in floors and walls under 20cm wide

Dumping stone including cost of stones. In Horizontal on level

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windowsincluding lSI marked M.S. pressed Butt hinges brightfinished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charg

Providing and fixing glazed shutters for doors, windowsand clerestory windows using 1Okg/sqm (4mm thick) float Rate for thickness of glass panes including lSI marked M.S. pressed butt· shutters in mm per sqm hinf!eS bright finished of required size with necessary screws

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering all work up to plinth level 1:3:6 ( 1 cement :3coarse sand :6 graded stone aggregate 20 mm nominal size) Cr.including all carriage

Providing and fixing of Electrification concelled sytem using of approved brand electric fittings.

Providing and applying white cement based putty of average thickness 2 mm,of approved brand and manufacture,over the plastered wall surface to prepare the surface even and smooth complete.

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade new work (two or more coats) over and including priming coat with cement primer

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work ( hard and soft wood)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade . New steel works (Two or more coats)

Making plinth protection 50 mm thick of cement concret1:3:6(1 cement :3 coarse sand :6 graded stone aggregate 20 mm nominal size over 75 mm bed of dry brick ballast 40 mm nominal size well rammed, consolidated and grouted with fine sand including finishing the top smooth

Cement concrete flooring 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone agg. ) finished with a floating coat of neat cement including cement slurry,but excluding the cost nosing of steps etc complete.50 thick with 20 mm nominal size stone agg. Cr.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete

Providing and fixing 1st quality ceramic glazed tiles conforming to IS:13753 of minimum thickness 5 mm of approved make like NITCO , ORIENT ,, SOMANY, KAJARIA or equivlant make in all colours , shades except begundy,bottle green , black of any size as approved by Engineer - in - charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3( 1 cement : 3 coarse sand ) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. including all carriage

Provision for Sanitry fitting including construction of Septic tank & Sokage pit

Provision for costt. Of water storage Tank

Provision for Man gate /Ornamental) Gate with RCC pillers Complete job.

Providing and fixing hardware anodised aluminium fittings including screwes complete (33.1)Sliding Tower bolt 300 x 16 mm

Tower bolt 200 x 10 mm

Tower bolt 150 x 10 mm

Handles 125 mm

Handles 100 mm

M/S MAX WORTH CONSTRUCTIONS

WANI CONSTRUCTION GROUP

M/S INFRATECH CONSTRUCTION COMPANY SHG

JAMWAL CONTRACTORS