84163/E8 PROVISON OF 125 AND 160 KVA DG SETS AT DOOM DOOMA UNDER GE(AF) CHABUA

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out complete all as specified and as directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m deep and getting out as in soft / loose soil for laying UG cable etc. complete all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n exc 25cm complete all as specified and as directed.

Removing Excavated Material (Soils) to a distance not exc. 50 Metre and Deposited where directed at a level not exc. 1.50 Metre above the Starting point, complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out , returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and removing surplus soil to a distance n exc 50 m and making good surface as in soft / loose soil complete all as specified and as directed.

Material and labour for Hardcore with Broken Stone or Boulders of Gauge exc. 63mm but not exc. 100mm, Deposited, Spread and Leveled in Layers not exc. 15 Cm thick, Watered and Rolled / Rammed to a True Surface complete all as specified and as directed.

Material and labour for 100mm thick Plain Cement Concrete (1:3:6), type C-2 (Using 40mm graded stone aggregates) as in Sub-base, Sub-floors, Floors and Paving, etc., complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:4:8), type D-2 (using 40mm grade stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.

M&L for 100 mm thick Plain Cement Concrete (1:2:4), type B-2(using 20mm graded stone aggregate) as in floor complete all as specified and as directed.

Material and labour for Brick Work with Sub-Class ‘B’ Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

Material & Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 Including necessary welding complete all as specified and as directed.

Material & Labour for applying two coats of Synthetic Enamel Paint (1st grade quality) over a coat of red oxide zinc chrome primer after preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminium Zinc Coating GI based Corrugated Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with and including Aluminium Self Tapping Screws and Aluminium Washers of suitable Size, complete all as specified and as directed.

S&F Pre-painted Galvalume Aluminium Zinc Coating GI based Plain Steel Sheet 0.50mm thick Coloured, having Tensile Strength of 550 Mpa in Roof Covering, Cladding to Walls, fixed with and including Aluminium Self Tapping Screws and Aluminium Washers of suitable Size, complete all as specified and as directed.

M&L 15mm thick rendering on Brickwork or concrete surface in Cement Mortar 1:4, Finished Plastered Surfaces Fair and Even, complete all as specified and as directed.

Supply, installation,commissioning and testing of 125 KVA capacity, 4 stroke, Silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002,ISO - 3046,BS-5514,DIN-6271 and Alternator as per IS: 13364, designed to run continuously at 1500 RPM with relay/AMF panel and switch gears for automatic starting on main failure,control panel having meter and sound proof canopy as per CPCB norms complete with the following accessories :- (A) Diesel Engine :- (i) Radiator cooling (ii) Radiator fan with guard (iii) Fly wheel with starting ring (iv) Dry type air cleaner (v) Vacuum indicator (vi) Mechanical governor (vii) Exhaust silencer (viii) Fuel filter (ix) Inline fuel pump (x) Water Pump (xi) Lub oil filter (xii) 24 Volt electric start system complete with starter, battery charging alternator (xiii) Engine control panel consisting of starting key switch,lub oil pressure gauge,ammeter safety shut down system for low lube oil pressure and coolent temperature engine maintenance manual with spare parts list. (xiv) Exhaust Pipe /stack upto 6 m from top of shed with insulation structural steel required for supporting exhaust pipe/stack,fixed supports,sliding supports etc (xv) First fill of lube oil and coolent. (xvi) Residential silencer eith cladding & supports

(Item No. 16 Contd..) (E) Accessories : (i) Base frame of sturdy design - 01 No (ii) Fuel tank rectangle shape of suitable capacity to fulfill requirement of 12 Hrs running in full load. (iii) Battery 12 v maintenance free with leads & connecting accessories -02 Nos (F) Spare Parts & Tools : (i) Rotary pump deisel with 3 mt hose -01 Set (ii) Box spanner set complete with all sizes (iii) Oil filter Set -02 Nos (iv) Air filter complete with element -02 nos (v) Fuel filter Set - 02 Nos (vi) AVR -01 No (vii) Insulated rubber mat of size 900 x 1500 x3 mm -02 Nos (viii) Jerrican PVC of 20 Ltr capacity -02 Nos

(Item No. 16 Contd..) Note : (i) PCC foundation of adequate / required size extending 500mm all round. (ii) (ii) DG set shall be tested as type test routine as per IS in presence of GE/his rep (iii) Contractor shall submit QAP ( quality assurance programme) after the 15 days from placement of order for DG set testing to factory.DG set shall be dispatch after inspection clearance by inspecting officer. (iv) The contractor shall get approval of GE for the make of Dg set they plan to procure. (v) Prior manufacturing the general arrangement drawing design details of the DG Set and AMF panel shall be got approved by GE (vi) Necessary fuel and testing material required for testing of Dg set to be provided by the contractor.

Supply, installation,commissioning and testing of 160 KVA capacity Silent Diesel Engine driven generating set 415 volts, 3 phase 4 wire, engine as per IS:10001/ 10002, and Alternator as per IS: 13364 complete with relay panel and switch gears as per CPCB Norms complete all as specified and as directed. (a) Diesel Engine :- (i) Radiator cooling (ii) Radiator fan with guard (iii) Fly wheel with starting ring (iv) Dry type air cleaner (v) Vacuum indicator (vi) Mechanical governor (vii) Exhaust silencer (viii) Fuel filter (ix) Inline fuel pump (x) water pump (xi) lubricating oil filter (xii) 24 volt electric start system complete with Starter, battery charging alternator. (xiii) Engine control panel consisting of starting key switch, lubricating oil pressure gauge, ammeter safety shut down system for low lube oil pressure and coolant temperature engine maintenance manual with spare parts list. (xiv) Exhaust pipe/ stack upto 6 m from top of shed with insulation structural steel required for supporting exhaust pipe/stack, fixed supports, sliding supports etc . (xv) First fill of lubricating oil and coolent. (xvi) Residential silencer cladding & supports.

(Item No. 17 Contd..) (e) Accessories: (i) Base frame of sturdy design -01 No (ii) Fuel tank rectangle shape of suitable capacity to fulfill requirement of 12 Hrs running in full load. (iii) Battery 12 V maintenance free with leads & connecting accessories -02 Nos (f) Spare Parts & Tools: (i) Rotary pump diesel with 3 mt hose-01 Set (ii) Box spanner set complete with all sizes (iii) Oil filter Set -02 Nos (iv) Air filter complete with element-02 Nos (v) Fuel filter Set -02 Nos (vi) AVR-01 No (vii) Insulated rubber mat of size 900 x 1500 x 3 mm -02 Nos (viii) Jerrican PVC of 20 Ltr capacity-02 Nos

(Item No. 17 Contd..) Note: (i) PCC foundation of adequate/ required size extending 500mm all-round. (ii) DG set shall be tested as type test routine as per IS in presence of GE/ his rep (iii) Contractor shall submit QAP (quality assurance programme) after the 15 days from placement of order for DG set testing to factory. DG set shall be dispatch after inspection clearance by inspecting officer. (iv) The contractor shall get approval of GE for the make of DG set they plan to procure. (v) Prior manufacturing the general arrangement drawing design details of the DG set and AMF panel shall be got approved by GE. (vi) Necessary fuel and testing material required for testing of DG set to be provided by the contractor.

Material & Labour for XLPE Cable of cross sectional area 95 sqmm x 3.5 core 1100 volts grade, insulated screened PVC bedded, galvanised strip or wire armoured electric power cables (heavy duty) with aluminium conductor, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc. including jointing with suitable Size Aluminium Lugs, complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks, GI Pipes, etc. will be Measured and Paid separately under relevant Items.

Material & Labour for XLPE Cable of cross sectional area 150 sqmm x 4 core,1100 volts grade, insulated screened PVC bedded, galvanised strip or wire armoured electric power cables (heavy duty) with aluminium conductor, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc. including jointing with suitable Size Aluminium Lugs, complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks, GI Pipes, etc. will be Measured and Paid separately under relevant Items.

Material & Labour for XLPE Cable of cross sectional area 185 sqmm x 3.5 core, 1100 volts grade, insulated screened PVC bedded, galvanised strip or wire armoured electric power cables (heavy duty) with aluminium conductor, laid in Trenches/ Ducts or Passing through Pipe or Fixing on Poles, etc. including jointing with suitable Size Aluminium Lugs, complete all as specified and as directed. NOTE : Necessary Earthworks, Sand Cushioning, Bricks, GI Pipes, etc. will be Measured and Paid separately under relevant Items.

Supply and fix in repair cable jointing kit for 1.1 KV grade cable for outdoor/indoor joint complete with Jointing material heat Shrink type and accessories suitable for 3.5 core XLPE, armoured, Aluminium conductor cable of size 120 Sqmm, outdoor type for joininng of damaged cable complete all as directed.

Supply and fixing Cable jointing kit for 1.1 KV grade cable for outdoor/indoor joint complete with Jointing material heat Shrink type and accessories suitable for 4 core XLPE, armoured, Aluminium conductor cable of size 150 sqmm,Outdoor type for joininng of damaged cable complete all as directed.

Supply and fixing Cable jointing kit for 1.1 KV grade cable for outdoor/indoor joint complete with Jointing material heat Shrink type and accessories suitable for 3.5 core XLPE, armoured, Aluminium conductor cable of size 185 sqmm,Outdoor type for joininng of damaged cable complete all as directed.

Supply and fix 90mm bore PPR(PN10) pipe "light grade" for cable protection, with all necessary fittings, ISI marked , fixing to required including MS Clamps, Channels, nut bolts complete all as specified and as directed. Note:- Necessary excavation and PCC work etc. if required shall be measured and paid separately under relevant items in this schedule.

Cutting bituminous road/ Hard path for passing of cable through 80/50/40 mm GI pipes, width not less than 30 cm and deep not less thhan 45 cm and making good to the cut surfaces by concreting PCC 1:3:6 , depth not less than 15 cm and width not less than 30 CM ) to match with the adjacent surfaces complete all as specified and directed at site.

Supply, Installing & testing and commissioning factory made and tested outdoor type floor mounted, LT panel Cubical type suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system having bus bar chamber with insulated Aluminium bus bar 400 Amps rating installed on porcelain insulators. The panel shall be dust and vermin proof. IP 65 class protection and made of 3.0 mm thick stainless steel sheet and 50 x 50 x 6 mm thick angle iron frame work, powder coated finish over one coat of red oxide primer out side and two coats of red oxide primer inside, both front & rear opening type with aprons for cable entry with double door shutter and locking arrangement, internal wiring with PVC insulated solid copper conductor FRLS cable IS 694 marked of adequate size but not less than 6 Sqmm. The scope of work includes the following :- INCOMMING :- (a) Aluminium Busbar 400 Amp rating (b) MCCB 4 Pole, 415 Volt, 250 Amps, breaking capacity 36 kA, - 01 Nos (c) ATS 250 Amps, 4 pole - 01 No (d) Multifuction panel meter square type to measure three/single Voltage phase, load current, frequency including necessary CT/PT of suitable ratio . : 01 Nos (e) LED Indicator lamp (R,Y,B) - Set of Three. OUTGOING :- (a) MCCB 4 Pole, 415 Volt, 125 Amps, breaking capacity 25 kA - 01 Nos (b) MCCB 4 Pole, 415 Volt, 100 Amps, breaking capacity 25 kA - 04 x working & 01 x Spare)

M&L Sand Cushioning (Dry) in Trenches/Ducts for protection of UG Cables (below, above and around the UG Cable laid) of 230 mm Spread thickness (80mm in Depth before Laying the Cable and 150 mm in Depth after Laying the Cable) and Consolidated (Punned) upto 180 mm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be Measured..

Supply & Laying Sub-Class B brick, Well Burnt, Laid breadth-wise along the Length of Cable laid in Trenches over Sand Cushion for UG Cable Protection, complete all as specified and as directed.

M&L Earthing with Copper Earth Plate Electrode 600x600x3.15mm thick buried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, Connected with and including Copper Earth Strip of Size 32 x 6 mm by means of Bolts, Nuts, Check nuts and Washers of Copper and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) ‘Light’ grade Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregates) and Pre-cast RCC 1:2:4 (20mm graded stone aggregates) Cover Slab of Size 450x450x50mm, Reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) ‘Medium’ grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed. NOTE :- (i) All Joints should be joined by Exothermic Welding or Brazing. (ii) Main earth lead beyond 7.5 meter shall be measured and paid separately.

M&L Earthing with Galvanised Earth Plate Electrode 600 x 600 x 6 mm thick buried directly in Ground (Earth Pit not less than 2.25 Metre below Ground Level) with Top edge of the Plate not less than 1.50 Metre below Ground Level, Connected with and including Copper Earth Strip of Size 32x6.0mm, 7.5m long by means of Bolts, Nuts, Check nuts and Washers of Copper and connected Earthing Testing Point/Bus-bar with GI 40mm bore (dia) "Light grade" Protection Pipe, Earth Plate surrounded by a packed thickness of Char Coal or Coke Dust mixed with Common Salt in alternate layers of not exc. 150mm thick, PCC Pit in Cement Concrete 1:3:6 (20mm graded stone aggregates) and Pre-cast RCC 1:2:4 (20mm graded stone aggregates) Cover Slab of Size 450x450x50mm, Reinforced with 10mm dia TMT Bars @ 100mm Centre to Centre in both ways, GI Wire Mesh, PGI Funnel with GI Watering Pipe 20mm bore (dia) ‘Medium’ grade including necessary Excavation in Soft/Loose Soil, Returning, Filling in and Removal of surplus Spoil upto a distance of 50.00 Metre and all as shown in Electrical Plate No. 3 of MES Schedule Part-I and Testing on Completion, complete all as per specified and as directed. NOTE : All Joints should be joined by Exothermic Welding or Brazing.

MONA GENERATOR SEVICES PVT. LTD. (BID ID -3452693)

ANIL RAI AND COMPANY (BID ID -3447247)

S.G.ENGINEERING COMPANY (BID ID -3452334)

kabitaconstruction (BID ID -3452414)