Addn / Altn and certain other misc works at single Officer Accn Building No T-1 at 3 AFSR.

Amount

Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.

M&L non skid ceramic coloured tile 7 to 8mm thick(square/rectangular) area of each tiles exceeing 0.06 sqm but not exceeding 0.11 sqm in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L Glazed ceramic coloured tiles 7 to 8 mm in verticle surface of size 350x250x7 / 450x200x7mm thick including 10 mm thick rendering in CM (1:4) Over and jointed in neat cement slurry and pointed in white or coloured cement to match complete. All as specified and directed.

M&L for Vitified Ceramic tiles 8-9 mm thick (square/ rectangular) polished of any shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 and polishing complete all as specified and directed by Engr-in-charge.

M&L for Vitified Ceramic tiles 8-9 mm thick (square/ rectangular) polished of any shade, area of each tiles not exceeding 0.36 sqm, in vertical surfaces such as dao and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 12 mm thick rendering in CM 1:4 and polishing complete all as specified and directed by Engr-in-charge.

M&L for 18mm thick Granite (of any type) machine cut, in window cills, bathroom platforms, shelf platforms etc. bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 15 mm thick screed bed in CM 1:6 and polishing complete all as specified and directed by Engr-in-charge.

M&L for 18mm thick Granite (of any type) machine cut, in vertical surfaces etc. bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over and including 12 mm thick rendering in CM 1:4 and polishing complete all as specified and directed by Engr-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations complete all as specified and directed by Engr-in charge.

Taking down chowkhat or frame with shutter (without taking off shutter from the frame) not exceeding 1.5 Square Metre each, removing from the site including taking out existing hold fast etc. complete all as specified and as directed.

All as per Serial item No 9.00 here-in-before but area exc. 1.50 Sqm but not exc. 4 Sqm each complete all as specified and as directed.

Taking down aluminium door frame with shutters (Without taking off shutters from frame) exc 1.5 Sqm n exc 4.00 sqm each complete all as specified and directed.

Supply & Fixing 2nd class hard wood plain, soild straight chowkats and frames of wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed by Engineer-in-Charge

S&F for 30 mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides and fitted to chowkhats complete all as specified and directed.

S&F Mild Steel Butt hinges, heavy weight, cold rolled, of size 100 mm complete all as specified and directed.

S&F Aluminium handle, cast type anodized size of handle 100 mm complete all as specified and as directed.

S&F Aluminium anodized, barrel tower bolt of extruded section, length of bolt 100 mm complete all as specified and as directed.

M&L for preparation of new painted surfaces of wood and wood based material of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over pink primer of approved tint, complete all as specified & directed.

S&F in repair 100mm extruded brass handles, fabricated type polished and fixed with nut, screw and washer of mild steel complete all as specified and directed.

S/F in repairs for Block boards, 18/19mm thick grade 2 quality, interior grade, decorative type with veneer/lamination as approved on both face fixed with screws to timber and frame work

S&F 30mm width of flap continuous (piano) hinges, mild steel, bright finish complete

S&F aluminium anodised powder coated frame of standard section and thickness of section not less than 1.5mm as directed or as per TD of CE(AF) shillong Zone for doors, windows, ventilators of any colour as approved with one or more rebates including joining cleat, etc for fixing etc. complete all as specified & as directed.

S&F aluminium anodised powder coated door shutters and thickness of section not less than 1.5mm, with top rial of size 47.62mm x 44.45mm, intermediate rail 100mm x 44.5mm, bottam rail 88mm x 44.5mm, style size 44.45mm x 47.52mm, including necessary joining cleats, glazing clips, rubber neoprene packing/ rubber gasket, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified & directed. Note : all the aluminium shutter will be as per TD drg no:- AF/TD/242/15 shet no 1/3,2/3,3/3 of CE(AF) shillong Zone. wire mesh or glass in pannel shall be measured seperately.

S&F aluminium anodised powder coated window and ventilator shutters and thickness of section not less than 1.5mm , sliding type with size of sliding shutter style 39mm x 20mm, top rail size 39mm x 20mm and bottom rail size 41mm x 20mm, joining cleats, glazing clips, rubber packing/rubber gaskets, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) , complete, all as specified & directed. Note : all the aluminium sliding window shutter will be as per TD drg no:- AF/TD/242/15 (R) shet no 1/6,2/6,3/6,4/6,5/6,6/6 of CE(AF) shillong Zone. wire mesh or glass in pannel shall be measured seperately.

S&F Anodised aluminium powder coated ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed

S&F anodised aluminum Grill made of 5 mm dia aluminum bars, size of mesh 50 mm by 50 mm fixed together with aluminum frame of size 40mmX10mmX1.9 mm thick for aluminum window ( Deco grill) complete all as specified and directed.

S&F 5.5 mm thick sheet glass, ordinary quality, glazing with oil putty etc. area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane with and including solar control film 50 micron reflective type (greater sun control or equivalent) in aluminium door complete all as specified and directed.

S&F 4 mm thick sheet glass, ordinary quality, glazing with oil putty etc. area exceeding 0.50 Sqm but not exceeding 1.0 Sqm each pane in aluminium window complete all as specified and directed.

S&F in repair Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or screws to alluminium skeleton door pannel complete all as specified and directed.

S&F in repairs aluminium body hydraulically Door closer regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed as in repairs complete all as specified and directed.

S&F in repair mild steel mortice lock 4 levers, vertical type, size 100mm complete all as specified and directed.

S&F in repairs Drapery curtain Rod 20 to 22mm dia of approved colour/ shade with decorative end brackets at both ends fixed to wall of any desceiption with screws complete all as specified and directed. Make : Vista or equivalent.

S&F in repairs Door bottom seal brush with metal frame with nylon brush/rubber with height upto 30-40mm fixed with screws to any type of doors (wooden/alumium/PVC) including neccasry fittings complete all as specified and drected.

Cutting holes in brick walls for inserting holdfasts and making good dismantled portion by filling cement mortar (1:3) or concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) exc. half brick thick but not exc. one brick complete all as specified and as directed.

S&F Mild steel work as in band, straps, supports for RWP, clamps, hold fasts, wall ties, hooks & pintle hinges and similar small articles conforming to Fe-290-0 or Gde E-165 complete all as specified and as directed by Engineer-in-Charge

Taking down PVC Chowkats or Frames, not exc. 1.50 Sqm Each with Shutters (without Taking Off Shutters from the Frames) complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5 mm wood grain printed PVC sheet reinforced with MS square tube and edges will be painted to match will printed sheet fixed in opening as per specification & drawings complete all as specified and as directed.

S&F in repairs Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing and taking down old door shutter with frame complete, all as specified & directed. Make : Rajshree, Plastiwood or equivalent as approved.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth on brick walls complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connnections, including cleaning for refixing or removal to store.

All as per item No 39.00 here-in-before but 20 mm bore complete all as specified and directed

S&F for tubes, 'medium garde' galvanised, with all fitting and fixed complete to walls and ceillings or laid in floor for 20mm bore pipe complete all as specified and directed

All as per item No 41.00 here-in-before but 15 mm bore complete all as specified and directed

S & F in repair CP Health Faucet 8 mm dia with 1 meter long Easy flex tube and wall hook with NRV (black flow preventor) make - Jaguar Cat No ALD CHR - 583 or equivalent make as approoved) complete all as specified and directed by engr-in-charge

S & F oval type counter basin size 595x420x200 including waste coupling etc complete as specified and directed by Engr-in-Charge.

S&F in repairs Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) with full thread coupling and washers complete all as specified and directed by Engineer-in Charge.

S&F in repairs Bib taps (15mm dia of bore), cast copper alloy with capstan heads, fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule and fixed includng neccesary fittings complete all as specified and directed by Engr-in-charge.

S&F in repairs 3 in 1 wall maounted mixer (15 mm bore) with quater turn fittings and provision for overhead shower with 115 mm bend pipe & telephonic shwer with 225mm long bend pipe and wall flange, cast copper alloy with capstan heads, fancy type chromium plated (robotic electroplating for everlasting lustrous shine) with 2 water volume adjustment knobs one both side to control the flow of temperature ,screwed down, screwed for iron pipe or for brass ferrule and fixed includng neccesary fittings complete for mixing hot and cold water for tap and shower all as specified and directed by Engr-in-charge. Make : Hindware model no. F280018CP / Cera model no. F2002404 or equivalent

S&F in repairs brass center hole basin mixer with quater turn fittings for mixing hot and cold water (15mm dia of bore) , cast copper alloy, with capstan heads, fancy type chromium plated (robotic electroplating for everlasting lustrous shine) , screwed down high pressure, with 2 water volume adjustment knobs one both side to control the flow of temperature , screwed for iron pipe and fixed brass chromium Concealed angle stop cock with wall flange of 15mm dia capastan head including neccesary fittings complete all specified and directed by Engr-in-charge. Make : Hindware model no. F920034CP / Cera model no. F2002461 or equivalent

S& F in repiars Soap dish holder chrome plated wall mounted complete as specified and directed by Engr-in-Charge.

S & F in repairs Toilet paper roll holder with flap with chrome finish complete as specified and directed by Engr-in-Charge.

S& F in repairs chromium plated brass towel ring (premium quality) including taking down old one complete all as specified and directed by Engr-in-Charge.

S&F in repair viterous china wall mounted wash down water closet pan (pedastal pattern) white including fixing bolts, flushing cistern concealed (with dual water storage capacity of 4ltr and 2 ltr) and flush pipe, P or S trap provision of flush pipe, anti sypohonage pipe etc. with plastic water closet seat cover with soft close (white), complete all as specified and directed.

S&F in repairs Angular cock ( 15 mm dia of bore), cast copper alloy, fancy type Chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed as Engr-in-charge.

S&F in repairs Stop valves ( 15 mm dia of bore), cast copper alloy, fancy type Chromium plated with long shank and cups (concealed type) ,screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed as Engr-in-charge.

S&F PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed as Engr-in-charge.

Dismantling water tanks of exc 500 ltr and not exc 1000 ltr capacity and removing to store

S & F in repairs 1000 liters rotaional moulded polyethylene water storage tank, double layered (cylindrical vertical with closed top cover) as per IS-12701-1996 and PTMT 20mm ball valves/ float valve high pressure with epoxy aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm - 210 gms), hoisted and fixed in position including necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc. complete as specified in SSR Part-I complete all as directed by Engr -in-charge.

S&F in repairs 20 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe.

S&F in repairs 15 mm dia gun metal, globe or gate valve, with iron wheel head, screwed both ends for iron pipe.

Dismantling CI/AC/PVC (SWR) pipes & fittings of any description fixed to wall/laid in trenches including making good disturbed portion of wall floor etc.

S & F 110 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints , laid in trenches or in floor complete all as specified and directed by Engineer-in Charge.

S & F in repairs 110 mm dia PVC (SWR) bends any radius, without access door complete all as specified and directed by Engineer-in Charge.

S & F in repairs PVC (SWR) junction single (single T) equal or unequal 110mm bore, without access door complete all as specified and directed by Engr-in-charge.

Taking down floor trap/nahani trap of any description any size and making good to disturbed portion with cement concrete type B-1 1:2:4 with water proofing compound complete all as specified and directed.

M & L 75mm outlet dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement all as specified and directed.

S & F 75 mm dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints , laid in trenches or in floor complete all as specified and directed by Engineer-in Charge.

S & F in repairs 75 mm dia PVC (SWR) bends any radius, without access door complete all as specified and directed by Engineer-in Charge.

S & F in repairs PVC (SWR) junction single (single T) equal or unequal 75mm bore, without access door complete all as specified and directed by Engr-in-charge.

M&L for concrete bed to drain pipes for 110mm bore SGSW/PVC SWR drain pipe in cm 1:4:8 type D-2, using 40 mm graded stone aggregate including packing under and haunching against the sides of pipes in foul smell condition complete all as specifed and as directed.

Supply and fixing 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified.

Excavating in trenches in soft/ loose soil, not exc. 1.5m wide and not exc 1.5m in depth; for foundation, etc or for manhole , darin etc not exc. 10 sqm on plan and not exc 1.5 m in depth and getting out complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in CM including all quoins, arches, pillars, etc but excluding ashlar, facing, dressed stone work and pre-cast concrete articles complete all as specified and as directed by Engineer-in-Charge

Taking down cement plaster on brick/block surfaes of walls or concrete surface etc all as specified and directed.

M&L for brickwork with subclass 'B' Bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-charge.

M&L for Formwork to flat sides and soffits of floor or roof beams, beam haunch?ings, girders, bressummers,lintels, cantilevers, shelves including supports, overhangs etc. also splays between floors and beams etc. complete all as specified and directed by Engr-in-charge.

M&L for Formwork to flat soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed by Engr-in-charge.

M&L RCC 1:2:4 Type B-1 (20mm aggregate) nominal mix as Beams, cantilevers, lintels over 1.5m span etc. complete all as specified and directed by Engr-in-charge.

M&L RCC 1:2:4 Type B-1 (20mm aggregate) nominal mix as Slabs supported on walls, beams and columns in floors, roofs, etc. complete all as specified and directed by Engr-in-charge.

S&F Mild steel bars (TMT bars) 10 mm and above, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

S&F Mild steel bars (TMT bars) 6 mm to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified & directed by Engr-in-Charge.

M & L Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in copings, bed plates,cover for man hole, fixing of hold fasts and other similar works and the like incl weathering, slightly rounded or chamfered angles and throating as directed incl use and waste of necessary form work complete all as specified and directed.

M&L for rendering 15 mm thick (in two layers i.e. 10 mm + 5 mm thick) in cement mortar 1:4 to other than fair faces of brick or concrete surfaces with WPC (as per manufacturer instruction) finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

M&L for rendering 10 mm thick in cement mortar 1:6 to fair faces of brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.

Supply only WPC and apply as per manufacturer instruction complete all as specified and directed by Engr-in-charge.

M&L for applying 3mm thick wall care putty on wall and ceiling to provide smooth even surface complete all as specified and directed by Engr-in-charge.

M&L for preparation of newly plastered surfaces of walls and applying two coats of Oil bound distemper over a coat of primer as per manufactured instructions complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatement and preparation of old plastered/concrete surfaces of walls/roof/ incl necessary scafolding by brooming down, steel wire brushing, scrapping down, smoke soot, moulds,moss& efflorescent salts and applying two coats of Oil Bound Distemper over and including one coat of alkali resistant primer, complete, all as specified and as directed by Engr-in-charge. Note : Primer shall be applied after complete removal to existing treatment from old painted plastered/concrete surface. Rates includes necessary scafolding

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of alkali resistant primer as per manufactured instructions complete all as specified and directed by Engr-in-charge.

M&L for complete removal of existing treatement and preparation of old plastered/concrete surfaces of walls/roof/ incl necessary scafolding by brooming down, steel wire brushing, scrapping down, smoke soot, moulds,moss& efflorescent salts and applying two coats of cement based paint over and including one coat of alkali resistant primer, complete, all as specified and as directed by Engr-in-charge. Note : Primer shall be applied after complete removal to existing treatment from old painted plastered/concrete surface. Rates includes necessary scafolding and other necessary safety measures required (such as safety belt and safety rope, helmet etc for labour) during execution of work.

M&L for complete removal of existing treatment and preparation of old/plastered surface of wall incl necessary scafolding by brooming down, steel wire brushing , scrapping down, smoke soot, moulds, moss and efforescent salys and Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specifed and directed.

Returning, filling in, soft/loose soil in layers not excceding 25 cm thick, watering and well ramming complete all as specified and directed by Engr-in-charge.

Removal of surplus soil to a distance not excceding 50 mtr away & depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

M&L for hardcore (broken stone or boulders) of gauge n exc 63mm, deposited, spread and levelled in layers not exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed by Engr-in-charge.

M&L for 150 micron Polythene film, black, laid in floors complete all as specified and directed by Engr-in-charge.

M&L for cement concrete 1:4:8 type D-2 (40mm aggregate) foundation filling and mass concrete , subbase etc. complete all as specified and directed by Engr in charge.

M&L for 40mm thick cement concrete 1:2:4 type B-1 (20mm aggregate) as in floors complete all as specified and directed by Engr in charge.

M& L for 40 mm thick Damp proof course to horizontal or vertical surfaces including necessary form work in cement concrete 1:2:4 type B-0 (Using 12.5 mm graded stone aggregate) with integral WPC as per manufacturer instruction complete all as specified and directed by Engr-in-charge.

M&L for Plain Cement concrete 1:3:6 type C-2, using 20 mm graded stone aggregate as in surface channel, drain and plinth protection complete all as specifed and directed.

Dismantling AC sheet (Corrugated, Semi corrugated etc) as in roofs etc including ridges, complete all as specified & directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of a colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed .

S&F mild steel in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410-W (Gde?E- 250) quality?A?complete all specified and directed.

S&F 1mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) with grade of zinc coating 275, fixed with self tapping screws complete all as specified & as directed.

S&F Exterior ACP (Alumiumn composite panel) sheet of thicness 3-5 mm of any desired colour with PVDF (Polyvinylidene fluoride ) coated included all necessary fitting complete all as specified and directed by Engr-in-charge.

Dismantling unfamed timber scantlings, fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in any position

S&F Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads with sectional area exc 13 sqcm and n exc 25 sqcm of 2nd class hardwood complete all as specified.

M&L in reapairs for Second class hard-wood in scantlings clean swan for timber framed and fixed to replace old and decayed timber (including piercing, scarfing, etc. of old and new timbers if required) and removing defective portions to store

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness, including cover fillets, complete all as specified & directed.

S&F Solid PVC Wall Lining consisting of 5mm thick plain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specifed and directed by engr-in-charge.

S&F in repairs 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specifed and directed by engr-in-charge.

M&L for Provision of gypsum board of 9mm thick ceiling tiles size 595mmx595mm for including aluminium anodised section of size, wall angle 30mm x 25mm x 2mm thick, main / cross tee-section 15mm x 15mm x 1.4mm and suspended with 2.18 mm thick GI wire of suitable length and including fixed & aluminium snap grid all as per clause 10.38.1 of SSR Part-I and as per manufacturer’s instructions. complete all as specified and as directed by Engineer-in-Charge. Make : (i) Aluminium section : -- INDALCO/ HINDALCO/ JINDAL (ii) PERFORateD /SEMIPERFORateD TILES :--- ARMSTRONG/ LAFARG

M&L for preparation of new steel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of zinc chrome primer complete all as specified & directed.

S&F 1mm thick plain galvanised mild steel sheeting in ridges, hips, valley gutters, drip and straight flashings (length & girth as fixed) with grade of zinc coating 275, fixed with self tapping screws complete all as specified & as directed.

M&L for Johnson Endura Industrial (Heavy duty ) vitrified tiles or equivalent with grey cement and pigment of size 30 x 30cm x 12mm thick of dark shade, set and jointed with neat cement slurry over and including 15mm thick bedding layer of cement complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) all as specified and directed

Taking down carefully old unserviceable copper/aluminium point wiring (light, fan, socket or power) complete,including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, sunken type box etc.and removing materials to store for keeping in safe custody for reuse at site or for taking credit and making good to disturbed surfaces of walls, floors etc with its original specification complete all as specified and directed by Engr-in-Charge.

Taking down carefully MCB DBs SP/TPby unscrewing from main switch boards/cut out boxes and removing materials to store for keeping in safe custody for reuse at site or for taking credit including sealing the cable ends and making good disturbed surface of wall etc as per existing finishes complete all as specified and directed.

Material and labour for point wiring for One light/exhaust/Ceiling fan point controlled by one,one way switch with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC concealed conduit pipe of 20/25 mm dia(as required) modular sunken box of required size/type to accomodate the switches,sockets and regulators etc including necessary accessories like bends, tees and elbow etc fixed in wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including complete all as specified and directed as below :- Note: Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed by Engr-in-Charge.

Material and labour for point wiring for One 3 Pin 5 Amps socket out let point on independent board with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC concealed conduit pipe of 20/25 mm dia(as required) modular sunken box of required size/type to accomodate the switches,sockets and regulators etc including necessary accessories like bends, tees and elbow etc fixed in wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including complete all as specified and directed as below :- Note: Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed by Engr-in-Charge.

Material and labour for point wiring for One 3 Pin 5 Amps socket out let point on same board alongwith other suitable switchs with 1.5 Sqmm single core, PVC FRLS insulated unsheathed, multistranded copper conductor drawn through and including PVC concealed conduit pipe of 20/25 mm dia(as required) modular sunken box of required size/type to accomodate the switches,sockets and regulators etc including necessary accessories like bends, tees and elbow etc fixed in wall/ceiling with 1.5 Sqmm PVC FRLS insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including complete all as specified and directed as below :- Note: Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed by Engr-in-Charge.

All as per item No 121.00 here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board complete all as specified/directed.

Supply and fixing of modular switch one way 6 amps 1 module 240 Volts complete all as specifed/directed.

Supply and fixing of modular socket outlet 2/3 pin 6 Amps 240 volts 2 module complete all as specified/ directed.

Supply & fixing of modular switch one way 16 Amps 1 module 240 Volts complete all as specified / directed.

Supply and fixing of modular socket 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed.

Supply & Fixing of modular type ceiling fan regulator electronic step type, 2 module, 120 W complete all as specified and directed.

Supply and fixing of ceiling rose 3 ph PVC/Polycarbonate complete all as specified and directed.

Supply and fixing of modular metal flush box 1/2 module.

Supply and fixing of modular metal flush box 3 module.

Supply and fixing of modular metal flush box 6 module.

Supply and fixing of modular metal flush box 8 module.

Supply and fixing of modular white cover plate with frame 1/2 module

Supply and fixing of modular white cover plate with frame 3 module

Supply and fixing of modular white cover plate with frame 6 module

Supply and fixing of modular white cover plate with frame 8 module

Supply and fix in repairs of MCCB TPN DB 8 way double door,IP 43 protection, Glazed door, isolated neutral bar, insulated bus bar assembly,mechanical strength of IK09 complete all as specified and directed.

M&L for Type 1+2 AC Surge Protection Device TP+N (4 Pole) 320 volt, 20-50KA, Protection against direct and indirect lightning surges, Maximum Discharge Current - Imax up to 100kA and Conforms to IEC 61643-11 all as directed by Engr-in-Charge.

Supply and fix in repairs of MCB SPN DB 8 way double door,IP 43 protection,Glazed door, isolated neutral bar,insulated bus bar assembly,mechanical strength of IK09, complete all as specified and directed.

Supply and fixing in repairs 415V 10KA 'C' curve miniature circuit breaker (MCB) of Three poles and neutral current carrying capacity 100 A in the DB complete with connection testing and commissioning.

Supply and fix in repairs of MCB SPN 32 Amps 'C' Series 10 Ka,240 volts complete all as specified and directed.

Supply and fix in repairs of MCB SP 6 to 32 Amps 'C' Series 10 KA,240 volts complete all as specified and directed.

Supply and fixing LED lights fitting 1x 18W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.

Supply and fixing Aesthetically designed wall bracket light with Brushed Nickel metallic body with glass outer cover with B22d electric bulb & E27 lamp holder from ceiling rose to light fitting complete all as specified and directed.

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Taking down aluminium submain wire along with damaged casing caping /PVC conduite pipe from the wall roof or floor and making good distrubed surface complet all as specified and directed by Engr-in charge

Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC conduit concealed of adequate size with all necessary fittings and accessaries and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through pvc conduit concealed and connected common earth dolly including taking out the old sub main wiring shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. Note: Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed by Engr-in-Charge.

Material & labour for Sub main wiring with two runs of single core 1.5 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh into PVC non metallic rigid conduit concealeed including PVC insulated stranded copper conductor nominal cross section area as under as contineous earth continuity wire complete all as specified. Two run of 1.5 Sqmm cable one run of 1.5 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed. Note: Rate for Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate all as specified & directed by Engr-in-Charge.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan all as specified and directed by Engr-in-Charge.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanised wire of dia 4 mm as earthing lead by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and eath works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed. Note: No extra payment will be for the earthing GI wire of size 4 mm dia

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m

Supply, laying and testing cable XLPE Insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core

M&L for fixing the cable junction boxes of size 155 x 210 x 92 mm, with terminals for 10 - 16 sq mm, 4.0 /3.5 C, 1100V cable, IP 66/69, weather proof, outdoor installation type with threaded cable glands & pole mounting brackets etc complete all as specified & directed. Make : Hensel / OBO

S&F LED decorative Bollad light of 10/11W, IP65,CCT(K)-3000 for new generation,Sturdy IP 65 LED Bollard with excellent light out put through its PMMA window ensuring maximum illumination aspect in surrounding. including taking down old unserviceable bollard light of any capacity. Make : Havells/Wipro/Philips or equivalent make specified in CA.

KUNDAN ENGINEERS AND BUILDERS

PURBANCHAL BUILDERS

Purbanchal Construction Co

Technolinks

M/S PANKAJ SUPPLY SYNDICATE

M L TREATMENTS