SPECIAL REPAIRS TO BLDG NO P-130 KT COY

Amount

S&F pre- coated coloured galvalume Aluminum Zinc coating profile pattern steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa and AZ150 as in roof covering/ clading to wall, including crimping sheet at end fixed with self tapping screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed. Make:-JSW Colouron+/Durashine manufactured by TATA BlueScope Steel or equivalent make as approved by GE

S&F 0.45 mm thick galvalume sheet precoated coloured for ridge having tensile strength of 550 Mpa and AZ150 fixing for closing gable truss suitable for profile pattern sheet fixed with self driving screws including dismantling of Asbestos cement (corrugated, semi corrugated, etc) sheets roofing complete all as specified and directed. Make:-JSW Colouron+/Durashine manufactured by TATA BlueScope Steel or equivalent make as approved by GE

S&F roof trusses ( framed), trused, purlin, crane gantries, raills and fastenings and heavy braket framing (beams, tee , angle,channel or flat sections) including distance pices, cleats. etc., (welded/reviting) conforming to Fe 410-W (Gde-E250) quality 'A' complete all as specified and directed

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer of surfaces over 10cm width or girth complete all as specified and directed

M&L for one coat of synthetic enamel paint on old painted steel surfaces of any desription over 10cm width or girth incl preparation ofsurfaces such as removing all splashes, drops, dirt and leaving premises in a clean state complete all as specified and directed

M&L for PCC ( 1: 2: 4) type B-1 (using 20 mm graded stone aggregate) on roof top as a leveling course / padding to maintain the slope,finished the surface even and fair without using extra cement, complete all as specified & as directed .

M&L for 10mm thick plaster in CM 1:4 mixed with water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed (Note :- WPC shall be measured and paid separately)

M&L for water proofing treatment to RCC roof with approved modified membrane of weight not less than 3 kg/sqm comprising the following items including taking down of old roof treatment of any description with mud phushka, lime, concrete,tiles , cement plaster, padding upto 20cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and removing debris to a distance exc 1.5 km complete all as specified and directed (Note:-The height of roof may upto 9m):-

The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting.

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kg per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.

Laying of water proofing APP modified polymeric water proofing membrane of weight not less than 3 Kg / sqm composed of 100 micron (+10% ) high density polyethylene sheet (HMHDPE) as center core, which is sandwitched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps100 mm as per manufacture instruction

Applying one coat of hot blown bitumen of 85/25 grade @ 1.20 kg/Sqm.

Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed

Demolition of brickwork or stone/boulder masonry, built in cement or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified & directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water complete all as specified & directed.

M&L for brick work with sub class 'B' bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and

M&L for brick work with sub class 'B' bricks, old size, straight orcurved on plan to any radius in half brick thick wall built in cement mortar (1:4) complete all as specified and directed

M&L for rendering two coat of cement plaster on stone masonry surfaces or surfaces other than fair face of brick work ,first coat 15mm thick in cement mortar (1:6) and second coat cement plaster 15 mm thick in cement mortar (1:4) with WPC @ 3% by weight of cement, finished the surfaces fair and even complete all as specified and directed. Note:- WPC shall be paid seperately under respective item

M&L for rendering two coat of cement plaster on stone masonry surfaces or surfaces fair/other than fair face of brick work, first coat 15mm thick in cement mortar (1:6) and second coat cement plaster 15mm thick in cement mortar (1:4) finished the surfaces fair and even complete all as specified and directed.

M&L for rendering 10 mm thick on ceiling in cement mortar (1:3), finished the surfaces fair and even complete all as specified & directed.

Supply only Integral waterproofing compound ISI marked complete all as specified and directed

M&L for suspended false ceilling comprising of non asbestos fibre cement bulding boards 4mm thick of size 595mmx595mm, ‘E’ board classic design lake & hill including S&F GI ‘Tee’ grid frame work of size 605mmx605mm made out of special section mild steel galvanized sheet 0.3mm thick, bottom portion painted with cellular Nitro painting, warping the suspended wire around the existing wooden/steel purlin/rafter for suspending grid frame work with 4mm dia GI wire @1200mm c/c on main Tee and fixed to T-grid with the help of level clip or manufacturer’s instructions (the section shall consists of main Tee 37mmx24mmx0.60mm, cross runner Tee 37mmx24mmx0.60mm), perimeter angle of size 24mmx24mmx 0.50mm fixed to perimeter of wall with GI screw of 40mm long@450mm c/c including dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

M&L for nonskid coloured ceramic tiles 7 to 8mm thick area of each tile exc 0.11 Sqm but not exc 0.18 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match coiour/shade laid over & including 15mm thick screed bed layer in CM (1:6) including dismantling floor tiling with cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed

M&L for 25mm thick PCC (1:2:4) type B-1 (using 20 mm graged stone aggregates) as in floors finished rough to receive the tiles complete all as specified & directed..

M&L for glazed ceramic coloured tiles on vetical surfaces size 600mmx300mmx7mm to 8mm thick laid over & including 10mm thick rendering in CM 1:4 set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade /colour of tiles including dismantling wall tiling with cement mortar bedding (but not backing) and rubbish off the premises

Taking down chowkhats or frame exc 1.50 Sqm but not exc 4 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed

Taking down chowkhats or frame not exc 1.50 Sqm each with shutters (with out taking off shutters from the frames) complete all as specified and directed

S&F pressed steel frames of size 125mm X 60 mm with rebate on both side including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the disturbed surfaces in CM 1:6 complete all as specified and directed

S&F pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the disturbed surfaces in CM 1:6 complete all as specified and directed.

M&L for PCC 1:3:6, type C-1 (using 20 mm graded stone aggregates) as in filling of hold fast chowkhats complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle-2Nos, 125mm long tower bolt in each leaf, steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed

S&F factory made PVC door frame of size 50 mm x 47 mm made out of 5 mm single side Prelam PVC sheet cut at corner and jointed with 02 Nos, 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical number & minimum 02 Nos. for horizontal member) complete all as specified and directed

S&F factory made 35mm thick flush shutters , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F factory made 35mm thick second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (without sash bars) edges of farrming plain chamfered or rounded fitted with cut and mitred beads for securing glass etc ,size of member of shutter as specified in SSR Part -I ,section 8,clause 8.20(a) complete all as specified and directed

S&F factory made soild PVC moulded door shutter, 28mm to 30 mm thick (stiles) with wood free EPS with 2, 4 or 6 raised panel design with 4mm thick moulded prelam PVC sheet on the front face & 4mm thick plain colour sheet on back face, with and including stainless steel butt hinges 100 mm and fixed with screws complete all as specified and directed

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed

S&F fixed type ventilators aluminium powder coated of frame size 63mmX 38mmX 1.5 mm thick half portion shall be fixed with 4mm thick frosted glass and other half portion shall be fixed with louvers with 4mm thick frusted glass including rubber gasket and aluminium beading, aluminium grill with fixing arrangement (wt. of grill shall not be less than 2.50 kg/sqm), aluminium wire mesh 0.45 mm dia to be fixed over louvers portion including necessary cutting holes on wall and fixing arrangements complete all as specified and directed

M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregates) as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

S&F stainless steel wire cloth 0.36 mm nomiral dia and wire and average width of aperture 1.40 mm fixed with stainless steel wire staples complete all as specified and directed

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

S&F 3.0 mm thick sheet glass ordinary quality and glazing with oil putty in square nexc 0.5 sqm in each pane complete all as specified & directed..

S&F aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F mild steel 150mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

S&F butt hinges medium weight cold rolled mild steel of 125 mm and fixed with screw complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt 200mm and fixed with machine made screws complete all as specified and directed

S&F aluminium anodised barrel tower bolts of extruded section, length of bolt in 150 mm and fixed with machine made screws complete all as specified and directed

S&F aluminium handles 150 mm size, cast type, anodised. and fixed with machine made screws complete all as specified and directed

M&L for preparation of new wooden surfaces of any description, not otherwise described over 10cm width or girth applying two coats of synthetic enamel paint over a coat of pink primer on ceiling complete all as specified and directed

M&L for precast cement concrete 1:2:4 type B 0 (using 12.5 mm graded stone aggregates) louvres and jallies, 25 mm thick (measured solid), including all mouldings but excluding frame and set in cement mortar 1:4 .complete all as specified and directed.

M&L for prepration of newly plastered wall sufaces & applying two coats exterior emulsion weather proof paint over one coat of exterior wall primer incl. of walls complete all as specified and directed . Make:- Asian ACE or equivalent make as approved by GE

M&L for complete removal of existing treatment on walls and prepration of old surfaces and applying two coats of exterior emulsion weather proof paint over one coat of exterior wall primer incl. properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls complete all as specified and directed

M&L for prepration of newly plastered wall surfaces & applying Birla/JK white wall care putty 2mm thick for levelling the surfaces of walls and applying two coats of exterior Acrylic emulsion over a coat of alkali primer including preparation of surfaces of walls etc complete all as specified & directed.

M&L for complete removal of existing treatment on wall and prepration of old surfaces & applying Birla/JK white wall care putty 2mm thick for levelling the surfaces including properly making of 'V' shaped crakes and filling of all crakes with crakes seal of walls and applying two coat of exterior Acrylic emulsion over a coat of alkali primer including preparation of surfaces of walls complete all as specified & directed.

M&L for applying two coats of white wash on old decorated ceiling surfaces including prepration of old surfaces complete all as specified & directed.

M&L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified & directed.

Demolition of PCC in ground floors and pavings n exc 15 cm thickness below or above ground level (unreinforced) including removal of debries out of MD land complete all as specified and directed

M&L for cement concrete (1:5:10) type E-2 (using 40mm graded crushed stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed

M&L for 75mm thick PCC 1:3:6, type C-1 (using 20mm graded stone aggregates) as in plinth protection surface finished even and smooth without using extra cement & provided with construction joint on the interval not more than 3.0m and filled with bitumen and sand mortar in 1:3 complete all as specified & directed.

M&L for Kota stone flooring 20mm to 22 mm thick in riser of steps, skirting, dado, etc size not less than 550mm mirror polished Machine cut Kota stone laid over and including 20 mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing including dismantling of Kota stones and tiles laid, bedded and pointed in any mortar of any description or thickness complete all as specified and directed

M&L for grinding and polishing mirror finish of existing Kota stone slab flooring complete all as specified & directed

M&L for 18mm to 20 mm thick Granite slab of any shade ( table rubbed and polished ) machine cut for floor /shelves in steps, jambs, pillars, window cills& cooking plateforms over 15 mm thick cement mortor 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs laid bedded and pointed in any mortor including dismantling of Granite tiles complete all as specified & directed

M&L for rounding to the edge of stone slabs one edge such as in steps, cooking plateform and other similar situations complete all as specified &directed.

M&L for cutting chases, pinning in, Stone concrete block or slab walls for concealed water tubing and making good, in cement mortor 1:3 cutting not exceeding 20cm girth complete all as specified and directed.

S&F in replacement 15 mm dia bore galvanised mild steel tubes of medium grade ISI marked galvanised with all fittings and fixed to wall & ceiling or laid in floor medium grade complete all as specified & directed.

All as per Srl item No 60.above but 20 mm bore -ditto-

S&F in repairs brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges fixed with and including chromium plated screws and wooden /plastic cleats (min wt 190 grams complete all as specified & directed.

S&F in repair 25 mm bore MS powder coated conduit curtain rods, suitable for door/ widows curtain with fancy type powder coated mild steel dooms with stainless brackets fitted to each end and fixed to wall incl. removal of existing rod and making good complete all as specified and directed .

S&F in repair vitreous china squatting pan “ORISSA” pattern size 580mm X 440mm, white with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) and including connection to trap & to flushing pipe anti syphonage pipe etc (excluding flushing cistern) complete including making good to floor complete all as specified and directed.

S&F in repairs PVC valveless Syphonic action type, Flushing cistern 10 litres capacity low level, white with inlet ball valve float handle and flush pipe 32 mm bore and brackets,complete all as specified and directed

S&F in repairs vitreous China wash hand basin white flat back of size 550mmx400 mm (overall) including cutting for and pinning in end of brackets,32 mm waste fittings,brass chromium plated for glazed ware sinks,basins etc.with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed.and flush pipe of polytethylene of low or high density or PVC 32 mm dia incl waste pipe and with centrally fixed brass chroium plated 15 mm bore pillar tap fancy type including 32 mm sink coupling complete all as specified and directed.

S&F in repairs sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.

S&F in repairs 40mm bore low density polyethylene pipes (LDPE) of of pressure rating 6 kgf/Sqmcm fixed complete to walls, ceiling or laid in floors etc complete all as specified & directed.

S&F in repair vitreous China urinal half stall type flat back of size 375mmx395mmx590mm (minimum) white with grating and union for discharge pipe, waste pipe, urinal spreader PTMT incl PVC connection 15 mm bore and 450 mm long complete all as specified and directed.

S&F in repair vitreous China urinal half stall type flat back of size 375mmx395mmx590mm (minimum) white with grating and union for discharge pipe, waste pipe, urinal spreader PTMT incl PVC connection 15 mm bore and 450 mm long complete all as specified and directed.

S&F in repairs 15 mm bore Cast copper alloy chromium plated wall mixer for mixing hot & cold water screwed down for iron pipe & fixed complete all as specified and directed.

S&F in repairs brass chromium plated shower rose fancy type with or without swivel joints, including fixing to steel pipe complete all as specified and directed .

S&F PVC connections 15mm bore size450 in length with both end brass/pvc high quality nuts complete all as specified and directed .

S&F in repairs stop valves/angle valve 15mm bore cast copper alloy chromium plated, fancy type, cast copper alloy screwed down, high pressure, with scrutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified & directed.

S&F in repairs CP angle valve / concealed stop cock cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed bnoth ends for iron pipe 15mm bore complete all as specified and directed.

S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed .

S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed and fixed to walls complete all as specified and directed .

S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed .

S&F in repairs 75 mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed fixed to wall complete all as specified and directed .

S&F PVC (SWR) bends 110 mm dia complete all as specified and directed .

S&F PVC (SWR) bends 110 mm dia with access door complete all as specified and directed .

S&F PVC (SWR) bends 75 mm dia complete all as specified and directed .

S&F PVC (SWR) bends 75 mm dia with accessable door complete all as specified and directed .

S&F PVC (SWR) 110 mm dia junction, single(single 'T') equal or unequal with acess door complete all as specified and directed . .

S&F PVC (SWR) 75 mm dia junction, single(single 'T') equal or unequal complete all as specified and directed . .

S&F 110mm bore PVC (SWR) vent cowl complete all as specified and directed .

S&F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified and directed .

M&L for 15mm thick plastering in CM 1:4 with water proofing compound at the rate of 3% by weight of cement and finishing the surface even and fair in sunken portion including rubbish off the premisescomplete all as specified and directed .(Note:-WPC shall be measured and paid seperately)

M&L for applying evenly two coats of industrial bitumen 85/25 at the rate of 1.20 Kg/Sqm in each coat over vertical surfaces and floors of sunken floors of toilet including cleaning of surfaces complete all as specified and directed

M&L for PCC 1:7:12, type F2 (using 40 mm graded stone aggregates as in filling (sunken portion) complete all as specified and directed

M&L for slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs etc. also splays between floors and beams fair finished the surface complete all as specified and directed.

M&L for TMT bars 10mm dia and over,as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed

M&L for point wiring for the following with 1.5 Sqmm PVC insulated FRLS, unsheathed, copper conductor stranded 1100 volt grade cable in & incl PVC trunking of size not less than 20mm ISI marked ivory white with all accessories such as tee, bend, joint cover including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and PVC laminated hylem/Anchor ISI marked top cover 3.0 mm thick for mounting of switches/sockets/ regulator etc and PVC insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green including taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs, & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor:-

For one light point or fan point controlled by one switch

For 5Amp independent socket point controlled by one switch

For one 3 pin, 5 Amp socket point with other switch on the same board

All as per Srl item No.95 here in before but for power point wiring using with 2.5 sqmm PVC FRLS insulated ,unsheathed, copper conductor stranded 1100 volt grade cable and 2.5 sqmm PVC insulated ,unsheathed, copper conductor stranded 1100 volt grade cable as continuous earth lead

S&F switch piano type flush, single pole, one way 5 A, 230 V complete all as specified and directed

S&F socket outlet, 5 pin, 5 Amp, flush type, 230 V complete all as specified and directed

S&F switch piano type flush, single pole, one way 15 A, 230 V complete all as specified and directed

S&F socket outlet 2 in 1,6 pin, 5/15 A, flush piano type 240 V.complete all as specified and directed

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed

S&F lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed

S&F electronic double space rotary 5 speed type regulator 120-280 V complete all as specified and directed

S&F testing and commissioning of MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F testing and commissioning of MCB SP 240 volt 63 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F testing and commissioning of MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed

S&F in replacement sheet metal enclosure for DB double door, IP-43 when MCBs to be used SPN, 8 way, 240 V with 200 Amps rated bus bar complete all as specified and directed. Note:-The rate shall be deemed to included for cutting and chasing in stone masonry and making good the disturbed surface.

S&F in replacement double door metallic sheet metal enclosure for DB double door (DPX-125 ) VTPN 4 Way 415 Volts with 200 Amps rated bus bars IP 43- "IK 09 complete all as specified and directed. Note :- The quoted rate shall be deemed to included for cutting and chasing in stone masonary and making good to disturbed surfaces

S&F in replacement MCCB 63 Amps 4 pole, 415 V 16 KA complete all as specified and directed

S&F in replacement double door metallic sheet metal enclosure for DB double door TPN 4 Way 415 Volts with 200 Amps rated bus bars complete all as specified and directed. Note :- The quoted rate shall be deemed to included for cutting and chasing in stone masonary and making good to disturbed surfaces

S&F in replacement of MCB TPN 63 Amps 415 V including making electrical coming/outgoing connections with lugs/thimbles complete all as specified & directed.

S&F in replacement TL fitting 20 /18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified & directed. . Make:- Havells Cat Part No LHEXBLP7PN1W020, 4 feet/ Bajaj cat part No BCLSB 20 WH/ CG Cat par No LCTC-18-CDL

M&L for provn of earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers of GI or steel all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified & directed. .Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.

S&F in replacement LED Bulk head 13/10 watt designed for modern homes availave in PIR as well as non PIR sensor with premium quality diffuser for glarefree light and easy to install snapfit installer complete all as specified and directed. Make - Havells cat part no LHEXCGP7UN5W013/BAJAJ cat part no BIBWP10WLED /CG cat part no LBHE-10-CDL.

M&L for sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 04 runs of 01 Single core of size 10 sqmm (for main three phase and nuetral) drawn in & inc PVC Casing-n-caping of suitable size ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 10 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

M&L for surface conduit sub main wiring with two single core PVC FRLS insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC conduit conduit PVC trunking of suitable size . ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed

Taking down ceiling fan and refixing/hanging in only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as directed by Engr-in-Charge.

Supplying and laying cable XLPE insulated armoured heavy duty electric cable with aluminium conductor, 1100 volt grade cross sectional area 25 sqmm, 4 core complete as specified and directed.

Excavation in trenches in hard/dense of soil not exceeding1.5 meter wide and not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out complete all as specified and directed.

Returning filling in with excavated soil, including spreading, leveling watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.

Removing excavated materials (soil) not exceeding 50metre and depositing where directed at a level not exceeding 1.5 meter above starting point complete all as specified and directed.

M&L for sand cushioning with dry and clean over and under the cable for protection of cable , 80 mm sand laid before laying the cable 150 mm sand after laying the cable and filling the sand in cable duct of inside the sub station building complete all as specified ans directed. Note:-Punned thickness shall be measured and paid

M&L for laying of sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable prependicular to the direction of cable complete all as specified and directed.

S&F in repairs pipe galvanised iron light grade (ISI marked) with all fittings laid in trenches or on pole, crossing of road,fixed on wall for protection of cables complete all as specified and directed of 40 mm bore complete all as specified and directed.

EX SERVICE MEN SECURITY AND MAN POWER SERVICES

M/S SHIVA TRADERS