Execution of various mechanical works under (Machinery and Equipment) for Mechanical Division Srinagar etc for WSS Dalbund Nishat part-2ND

Amount

Execution of various mechanical works under (Machinery & Equipment) for Mechanical Division Srinagar etc for WSS Dalbund Nishat part-2ND

Fabrication, Providing and fitting of M.S. delivery pipe of 350 mm dia, 8mm thick. The welding is to be carried out end to end and should comply with IS-816-1965 and the welding electrodes used for welding should comply with IS-814 1967.The delivery pipe is then to be reinforced with 600 mm dia rising main of steel Barrage Station. The job also includes fabrication of off sets wherever necessary for the proper alignment with the rising main. The pipe shall be painted by applying one coat of red oxide and the two coats of blue paint after cleaning the pipes The job involves all the handling charges like loading ,unloading carriage etc up to the site of work.

Providing , laying of cement concrete saddle blocks of size 3’-0” x2’-0” x 3’-0” in 1;:2:4 mix (08 nos) as support for 350 mm delivery pipe .The job includes all cost like cement, sand, aggregate shuttering etc

Fabrication, and fitting of M.S. flanged suction and delivery pipe of 250mm dia, available at site after cutting the already laid pipe of the pumping unit of Crude Lift Station. The welding of the pipes should comply with IS-816-1965 and the welding electrodes used for welding should comply with IS-814 1967.The pipe shall be painted by applying one coat of red oxide and the two coats of blue paint after cleaning the pipes The job involves all the handling charges like loading ,unloading carriage etc up to the site of work

Providing , laying of cement concrete saddle blocks of size2’-0” x1’-6” x 4’-0” in 1;:2:4 mix (02 nos as support for 200 mm delivery pipe .The job includes all cost like cement, sand, aggregate shuttering etc

Fabrication, providing and fitting of 250mm dia M.S. foot valve dual plate type . The body of the foot valve shall be 450 mm in dia fabricated out of 8 mm thick M.S. Plate having flange thickness 16 mm with overall length of 500 mm including strainer length 200 mm.The thickness of seat plate and weight plate shall be 16mm. The strainer shall have to be fabricated out of 10 mm dia. M.S round bars. The job also includes providing and fitting of nuts bolts along with rubber washers for the fitment of the foot valve

Fabrication providing and fitting of 250mm dia. M.S flanged long bend duly fabricated out of 8mm thick M.S plate having flange thickness of 12mm with 08 No. holes on the surface of pitch circle diameter having outer dia of 400mm. The bend shall be 90 easy type. The job also includes providing and fitting of nuts bolts along with rubber washers for fitment of the bend.

Providing and welding of 250mm diaM.S flanges as per table -5 plate flanges with the suction and delivery pipes of thickness not less than 20mm . The job also includes providing and fitting of nuts bolts along with rubber washers.

Providing,fixing,installation, testing and successful commissioning of DN250, PN16 D.I. Non-Return Valve complete with screwed fasteners and Gaskets having following specifications; Body and Cover: Ductile Iron EN-JS 1030(GGG-40) and epoxy coated. Disc: Ductile Iron EN-JS 1030(GGG-40) and epoxy coated. EPDM vulcanized all over Cover Screw and Nuts: Stainless Steel Plug: Brass Surface Protection: Epoxy Coating /Electro static powder coating to GSK quality regulations. Acceptable Make: VAG / AVK/TALIS “Test Certificate of manufacturer is Mandatory” The job includes providing and fitting of 02 nos. 20 mm thick M.S flanges perfectly adaptable to the inbuilt flanges of the above valve which shall be fitted with delivery pipe as per site requirement. The job includes the cost on account of Providing and fitting of fasteners and gasket required for the using of all types of skilled labors, tools and tackles , etc required for the job.

Providing,fixing,installation, testing and successful commissioning of DN350, PN16 D.I. Non-Return Valve complete with screwed fasteners and Gaskets having following specifications; Body and Cover: Ductile Iron EN-JS 1030(GGG-40) and epoxy coated. Disc: Ductile Iron EN-JS 1030(GGG-40) and epoxy coated. EPDM vulcanized all over Cover Screw and Nuts: Stainless Steel Plug: Brass Surface Protection: Epoxy Coating /Electro static powder coating to GSK quality regulations. Acceptable Make: VAG / AVK/TALIS “Test Certificate of manufacturer is Mandatory” The job includes providing and fitting of 02 nos. 20 mm thick M.S flanges perfectly adaptable to the inbuilt flanges of the above valve which shall be fitted with delivery pipe as per site requirement. The job includes the cost on account of Providing and fitting of fasteners and gasket required for the using of all types of skilled labors, tools and tackles , etc required for the job.

Providing ,Fitting ,Installation and Successful commissioning of 250 mm Diaresilient-seated Ductile Iron PN 16 Sluice /Gate valve of having below specifications. Body ,wedge and Bonnet: Ductile Iron(EN-JS- 1050/1030) Wedge (fully rubber Encapsulated all over with EPDM Stem : Stainless steel IS: 6603 12Cr13/22Cr 13; AISI 420/AISI 410 Nuts: Brass Surface Protection: Inside and outside Epoxy Coating /Electro static powder coating to GSK quality regulations. Mode of Operation Hand wheel/manual Acceptable Make: VAG /AVK/TALIS “Test Certificate of manufacturer is Mandatory” The job includes providing and fitting of 02 nos. 20 mm thick M.S flanges perfectly adaptable to the inbuilt flanges of the above valve which shall be fitted with the delivery pipe at appropriate spot /as per site requirement. The job includes the cost on account of Providing and fitting of fasteners and gasket required for the using of all types of skilled labors, tools and tackles ,arrangement of power etc required for the job.

M/S A R and SONs

M/S KHAN ELECTRICALS and MECHANICALS WORKS

M/s ASIAN ELECTRICAL AND MECHANICAL WORKS