REPAIR TO DRAIN, FOOTPATH, HARD STANDING, CULVERT AND OTHER MISC WORK AT VARIOUS LOCATION UNDER AGE BR-I OF GE (AF) ADM AREA AT AF STN AGRA.

Amount

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins, arches, pillars etc. but excluding ashlars facing, dressed stone work & precast concrete articles complete all as specified and directed.

M&L for brick work with fly ash bricks, old size, class designation 75 (Kg/cm2) straight or curved on plan exceeding 6 mtr mean radius and built in cement mortar 1:6 complete all as specified and directed.

All as per item No. 02 above but except Bricks NOTE: Old brick retrieved from demolition shall be used.

Taking down cement plaster on walls/ceiling of any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of brick/concrete and applying two coats of cement base paint over one coat of alkali resistance primer complete all as specified and directed.

M&L for applying three coats of white wash on wall including preparation of new surface complete all as specified and directed.

M&L for preparation of existing old plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including brooming down by steel wire brushes, scrapping down smoke spot moulds, moss and efflorescent salts, trading oils and greasy spots and applying one coat of white wash complete all as specified and directed.

M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channels and drains including formwork and demolition of cement concrete as in floor complete all as specified and directed.

Extra for forming fair finished drain or channel 60 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete including demolition of existing concrete complete all as specified and directed.

Dismantling of stone slabs and tiles of any description and thickness as in floor, walls, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

All as per item No. 14 above but except paver block NOTE: Old paver block retrieved from demolition shall be used.

M&L for 75 mm thick Cement concrete 1:4:8, type D2 using 40mm graded stone aggregate as in sub base of floor etc. including demolition of cement concrete complete all as specified and directed.

M&L for machine pressed rubber moulded coloured chequered cement concrete tiles 30cmx30cmx25mm thick, with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L Cement Concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other bands, plinth courses, string cources, lacing cources, parapets and railing upto 60cm in hight, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork complete all as specified and directed.

M&L for 100 mm thick Cement concrete 1:2:4, type B2 using 40mm graded stone aggregate as in path finished even and fair in floor including demolition of cement concrete complete all as specified and directed.

M&L for forming 12 mm thick 100 mm deep expansion joints filled with performed bituminious filler and top 30 mm primed & sealed with sealing compound grade 'A' complete all as specified and directed.

S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and laid in floor/trenches complete all as specified and directed.

S&F in repair PVC (SWR) bend with acess door 110 mm bore, complete all as specified and directed.

M&L for rolled mild steel section as in main & cross beam , hip and jack rafters, purlins, or similar works posts where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates etc. conforming to Fe-410-W (Gde. 290E) quality-A including taking down existing frame work complete all as specified and directed.

S&F rolled mild steel in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. conforming to Fe-410-W (Gde. 290E) quality-B including taking down existing frame work complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based corrugated steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement sheet (corrugated, semi corrugated etc) complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coated galvanised Iron based plain steel sheeting 0.5 mm thick, with side lap and end lap of any colour having tensile strength 550 MPA ridges, hips, valley gutters, drip and straight flashing or in roof covering fixed with self taping screws (length & girth as fixed) including dismantling asbestos cement sheet/ridge (corrugated, semi corrugated etc) complete all as specified and directed.

M&L for 40 mm thick Cement concrete 1:2:4, type B0 using 12.5 mm graded stone aggregate as in repair of floor finished even and smooth with using extra cement complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers, under layer 12 mm thick in cement plaster 1:4 (1 cement: 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square meter, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with making of groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down of old plaster/washed stone grit complete all as specified and directed. Note : Making grooves(of uniform size 15 mm x 15 mm) shall be included in quoted rates.

M&L RCC (1:1 1/2 :3) type A-1 using 20mm graded stone aggregate as in lintels upto 1.5m span, parapets and railing upto 60cm height , bed plates, water troughs and the like including weathering , slightly rounded or chamfered angle , throating including necessary form fork and demolition of existing RCC work complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 8 mm dia and over upto 10 mm dia as in stirrups , spacer and binder cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed.

M&L for 5 CM thick sand stone slab in sun shades, chajjas, shelves. cills, landing, cover stone, templates etc not exc. 2 m in length, punched dressed on face and along exposed edges , self faced on other side band ,set & pointed in CM (1:4) complete all as specified and as directed.

M&L for granite stone 18-20 mm thick (of any type) glazed (table rubbed and polished) fixed as in skirting, steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match and exposed edges rounded with and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab of size not less than 550 x 550 mm (except where lesser size required) as in flooring or in trades of steps 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing, rounding of edges and mirror finish polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed

M&L for machine cut kota stone 18 to 22 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 15 mm thick in cement mortar 1:4 finished rough to fix stone and taking down existing plaster complete all as specified and directed.

M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, excavation, returning filling and demolition of existing kerb stones complete comlete all as specified and directed.

Cleaning and opening of road/path culvert of length not exc 10 m and cross sectional area not exc. 2 Sqm including removing out all debris/ sludge/ earth/ building material/ rubbish and leaves/grass/bushes from the culvert and disposal of debris in low lying area complete all as specified and directed at site.

Cleaning and opening of roadside drainage pipe of any dia and removing debries out sidee the MOD land and disposal of debris in low lying area complete all as specified and directed at site.

M&L for preparation of new or previously untreated surfaces of steel or iron of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

rohan traders

SHRI RADHAYSHYAM JHA