SPECIAL REPAIR TO DSC TRADESMAN COMPLEX BLDG NO 502 4 DSC DINNING HALL PART OF BLDGS NO 502 1 BATH ROOM TOILETS 03 NOS AT INS TUNIR NAVAL STATION KARANJA

Amount

Demolition of brickwork/stone boulder masonary or precast concrete block wall ,precast concrete articles including all quoins ,pillars etc. built in cement mortar complete all as specified and directed.

M & L for brickwork with sub class 'B' bricks, straight or curved on plain to any radius in half brick thick walls built in cement morter 1:4 complete all as specified and directed.

M & L for brick work with sub-class `B' old size, straight or curved on plain exceeding 6m mean radius built in CM 1:6 complete all as specified and directed.

M& L for Pre-cast cement concrete block masonry with solid blocks,in PCC 1:3:6 Type C1 (20mm graded stone aggregate) exc. 10 cm in width and setting in mortar1:6 complete, all as specified and as directed

Taking down cement plaster on brick or stone walls, ceiling, etc. including racking out and joints, hacking for key, scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brickwork or concrete surfaces of walls in CM (1:6) finished smooth with thin layer of sagol complete, all as specified and directed.

M & L for rendering 10mm thick on ceiling surfacs in CM (1:3) finished smooth with thin layer of sagol complete all as specified and directed.

M&L for preparation of new plastered surface of wall and applying three coats of white wash on wall complete, all as specified and directed.

M&L for preparation of new plastered surface of ceiling and applying three coats of white wash on ceiling complete, all as specified and directed.

Dismantling floor, hearth or wall tiling including cement morter bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises.

M/L for providing joint free non skid special ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors , set and jointed in neat cement slurry mixed with and pointed in coloured cement to match with colour of tiles and pointed in white cement to match the colour of the tile over and including 15mm thick screed bedding layers in CM 1:6 complete, all as specified and directed.

M & L for Glazed coloured ceramic tiles of size (350 mm x 250 mm) x 7 mm thick / 450mm x 300mm x 7mm thick as in vertical surfaces such as skirting , dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and inlcuding 10mm thick backing coat in CM 1:4 etc complete all as specified and directed

M&L for non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M & L for non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

S & F vitreous china squatting pan water closet, 'Orissa 'pattern 580x440 mm white, with integral footrests (excluding flushing cistern and flush pipe) complete including provision of lime/cement concrete bedding , fixed in repairs.

S&F vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing blts, flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

S&F for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover amnd mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F in repairs Hand shower (Health Faucet) with 1m long Flexible tube & wall hook (Beaded Tube)(Prayag Cat No.BEA-85) fixed in pipe complete all as specified and as directed.

S & F in repairs 15mm dia bib cock 2-way double handle with flange (Cat No.7312) standard of CP any colour screwd for iron pipes and fixed complete all as specified and as directed.

M & L for 10 litre capacity PVC flushing cistern high/low including ball valve, pair of CI bracket,PVC inlet,outletpipe connection with brass check nuts & connecting to stopcock, PVC flush pipe etc complete fixed in repairs. Make : Commander/Champion/ slimline.

S&F in repairs fancy type bib taps 15 mm dia cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule complete all as specified.

S&F fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union as inr repairs complete all as specified and directed.

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.

S&F in repairs Wash hand basin vitreous china (flat back) size 630 x 450 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size complete all as specified and directed.

.M&L for providing 15 mm dia PVC connection 450mm longwith brass fly nut complete fixed in repairs

S&F brass CP towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.

S&F waste fiting brass chromium plated for WHB with long screwed shanks 32mm ,in repair complete all as specified and directed.

S&F pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed in repairs 15 mm bore of pipe complete all as specified and directed.

S&F 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed.

S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm fixed in repair

S & F 15mm GI tubing medium grade with all fitting making connections in new or old position (wall, ceiling, floors etc) including taking down old GI tubing in any position comolete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwar wall or including fxing cantilever brackets and connecting uinon to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

S & F 20mm GI tubing medium grade with all fitting making connections in new or old position (wall, ceiling, floors etc) including taking down old GI tubing in any position comolete all as specified and as directed.

S & F 25mm GI tubing medium grade with all fitting making connections in new or old position (wall, ceiling, floors etc) including taking down old GI tubing in any position comolete all as specified and as directed.

S & F 40mm GI tubing medium grade with all fitting making connections in new or old position (wall, ceiling, floors etc) including taking down old GI tubing in any position complete all as specified and as directed.

S&F in repair gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed n repairs for 20mm bore complete all as specified and directed.

S&F in gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed n repairs for 25mm bore complete all as specified and directed.

S&F in gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe & fixed in repairs for 40 mm bore complete all as specified and directed.

S&F 100mm dia outlet of cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

Dismantling of cast iron pipe or reinforced concrete drain pipes jointed in cement mortar and taking out of trenches if required 75 mm & 100mm dia pipe complete all as specified and directed.

M & L for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls with suitable clamp using pipes of 75mm dia complete all as specified and as specified and as directed.

M & L for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls with suitable clamp using pipes of 100mm dia complete all as specified and as specified and as directed.

M & L for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints laid in trenches using pipes of 75mm dia complete all as specified and as specified and as directed.

M & L for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints laid in trenches using pipes of 100mm dia complete all as specified and as specified and as directed.

S & F , 75mm dia cast iron bends ( any radius) with duck's foot or heel rest fitted with oval access doors complete all as specified and directed.

S&F, Cast Iron, floor Trap with grating 75mm dia of out let including jointing to waste pipe fixed in PCC Type B1 (1:2:4) using 20mm graded stone aggregate complete all as specified .

S&F rotational moulded polythene water storage tank of 1000 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position including taking down old water storage tank complete all as specified in SSR Part I and as directed

S&F in repairs 20mm bore Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Demolition of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above ground level un re-inforced complete all as specified and directed. .

M&L for Broken stone or boulder hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M & L for cement concrete 1:2:4 type B1 (using 20 mm graded stone aggretate) as in surface channel or drain complete all as specified and directed.

M&L for plain Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) 40mm thick as in flooring , finish even and smooth without using extra cement, complete all as specified & directed..

M&Lfor Glass dividing strips, 3 mm thick 38mm wide inserted in position .

M&L for Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Gde A, complete, all as specified & directed.

Extra for forming fair finished drain or channel exc 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends complete all as specified and as directed.

M&L for PCC of type D2, 1:4:8 using (40mm graded stone aggregate) 100mm thick as in sub base complete all as specified and directed.

M&L PCC 1:2:4 type B1 using (20mm graded aggregate), 100mm thick as in flooring finished even and fair complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using (20 mm graded aggregate) as in kerbing ,bed blocks etc complete all as specified and directed.

M & L for PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection, finish even and fair, complete all as specified and directed.

M&L for Chequered cement concrete designer tiles 20-cm x 20cmcm x 25mm thick rubber moulded with white cement and pigment (colour) in equal propotion glossy finish set jointed and pointed in neat cement slurry in floors/path etc laid over 20mm thick screed bed in CM 1:6 complete all as specified and directed

M&L or Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over 20mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed/ backing coat 10mm thick in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed

Rounding to edges of stone slabs etc ,/Nosing such as in steps, cooking platform, and other similar situations complete all as specified and as directed

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base 20mm thick in CM1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing ,grinding and polishing complete all as specified and as directed.

M&L for Griding ,Mirror polishing to existing kota stone slab flooring including skirting by mechanical/manual by suitable method including washing ,cleaning etc complete all as specified and as directed

M&L for 20mm thick Granite (of any type and any shade) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite , complete all as specified and as directed.

Taking down of Chowkats or frames not exc 1.5 Sqm each (without taking off shutters from the frames).

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

S & F flat iron as in holdfasts conforming to Fe-290 Gde-E-165 with splitted ends including cutting to length and drilling holes for fixing screws etc complete.

S&F IInd class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet re-inforced with MS square tube suppling and fixing in opening all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck in side with salvent cement for stiles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement suppling and fixing in the frame at site all as specified and directed.

S & F 100mm long butt hinges, medium weight cold rolled mild steel

S& F of Aluminum handles extruded aluminium alloy handles fabricated type anodised 150mm size

S& F of 250 mm aluminum alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing cast extruded section and fixing with suitable nut bolts (two and more washers)fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .

S& F of 200 mm aluminum alloy anodised sliding door bolt with hasp staple (bolt type ) and fixing cast extruded section and fixing with suitable nut bolts (two and more washers)fixing bolts and sliding bolts of extruded sections or cast aluminium alloy .

S& F of aluminum anodised barrel tower bolt of length 150mm of extruded section.

S& F of aluminum anodised barrel tower bolt of length 200 mm of extruded section.

S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed

S&F concealed star lock powder coated for aluminium window fixed as per manufacturers instructions all as specified and directed.

S&F in repairs aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all specified & directed. Make of grill Deco grill or equivalent

S&F green marble 17/18mm thick machine cut, jointing and pointing with white cement slurry including cutting and polishing and including 20mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed.

S&F 2nd class hard wood 30 mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats

S&F 2nd class hard wood 30mm thick Glazed and skelton shutter open rebated and prepare to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded fitted with and cut and mitered beads, for securing glass sizes of members of shutters as specified in SSR Part I Sec 8 Clause 8.24(a) supply and fitted to chowkats complete all as specified and directed.

S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for Prelaminated particle board,18/19mm thick interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame/metal work as in cup board shutter, shelvas etc complete all as specified and as directed

S&F Powder coated Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified.(minimum thickness of powder coating 50 micron)

S&F Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar,/sliding shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified . (Note wire mesh and glasing will be paid seperately under relevant item. Thickness or powder coating not less than 50 micron

M&L 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with alumium frame work rubber etc all as specified and directed.

M&L for 4 mm thick plain glass sheets ordinary quality in squares n exc 0.5sqm each pane fixed with aluminium frame work etc all as specified and directed.

M&L for rendering 20mm thick cement plaster in CM (1:4) on wall surface is to be finished even and smooth (without using extra lime or cement) including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls 110mm dia including taking down old pipe complete all as specified and as directed

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls 75mm dia complete all as specified and as directed

S&F for PVC (SWR) bends any radius 110mm bore complete all as specified and as directed

S&F for PVC (SWR) bends any radius 75mm bore complete all as specified and as directed

S&F 75mm bore PVC ( SWR ) vent cowl complete all as specified and directed.

S&F 110mm bore PVC ( SWR ) vent cowl complete all as specified and directed.

Removing Chipping ,removing carefully loose and broken concrete by chiselling ,low impact hammer /picking etc upto a depth of 80 mm or of complete loose portion from soffit of slab, column, beams and similar structural members, cutting edges, clearing the dismantled portion with wire brushes etc to remove dust, dirt and other foreign particles etc and washing with clean water with pressure including necessary scaffolding etc,and removal of debris to out of MD land, complete all as specified and as directed.

M&L for Clean existing reinforcement with wire/rotary wire brush, making the surfaces free from loose material dirt etc, complete, applying two coats of alkaline rust converting primer FEOVERT confirming to ASTM-B-117, on the rebars, including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 6 hour between the coats.

M&L for applying two coats of Epoxy based zinc primer in a span of four hours over the treatedrebars and allow to dry for six hours. The application shall be by brush. Epoxy primer for steel of Make/brand -corroseal-ZR of Krishna Conchem or Dr.Fixit Epoxy zinc primer.

M&L for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. as per manufacture's instruction . Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd.

M&L for rendering minimum up to 30mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and as directed

M&L for Providing and applying jacketing around columns with Micro concrete (Molith-MC) M40 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete.Note: Reinforcement shall be measured and paid separately.(Rates including jacketing, formwork and micro concrete)

M&L for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit

M & L for exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to revove dust, dirt, loose particles, laitance. Thereafter wash the surface with clean water & allow to dry. Fill visible cracks/jointis by Chemistic crackseal caulking compund & allow to dry for 24 Hours. Apply a primer coat of Chemistic Prime N Seal (water base primer) and allow to dry fopr 6 hours. Thereafter apply 02 coats of Chemistik PDS-50(WB high Build Anti Caronation Coating cum waterproffing) & shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade. Rate quoted shall include for scaffolding to any height , covering etc, complete all as specified and directed.

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja slope complete all as specified and as directed

M&L for rendering 10 mm thick cement plaster in CM (1:3) on roof top surface finished even and fair including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately as supply only

Supply only integral water proofing compound

M&L for applying oil bound primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the prepared dry roof surface and provide and lay 4mm thick APP modifed water proofing membrane reinforced with non-wooven polyster matt with physical properties as given in particular specification. The laying shall got be done through authorized applicator of manufacturer as specified in particular specifications. Provide over the membrane finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/sqm as prescribed by manufacturer of membrane complete incuding removal of existing water proofing treatment of any description in any position and cleaning,the surface by wire brushing, watering, etc removal of debris upto 1500mtr distance as directed by Engineer-in-charge complete all as specified and as directed .

M&L for epoxy base joint paint such as on external surfaces of walls to fill the cracks by cutting ' 'v' 'grooves cleaning the grooves all dust etc ,by wash ,get dry then fill with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and as directed Make : Pidilite / Fosrac / Chemistic/ Dr Fixit or equivalent

M & L for preparing new or epoxy joint filled surfaces of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer (camouflage pattern) or plain complete all as specified and as directed.

M&L preparation of new plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for complete removal of existing trement of any description on wall surfaces,washing, rubbing down and stopping of distempered and painted surfaces and apply two coats of oil bound distemper over a coat of chalk whiting primer including preparation of surfaces with white birla putty filling on uneven surafce etc complete all as specified and as directed

M&L complete removal of existing trement of any description on wall surfaces,washing, rubbing down and stopping of distempered and painted surfaces and apply two coats of acrylic (antifungal) exterior grade paint of plain/camouflage pattern over a coat of primer including preparation of surfaces with white birla putty filling on uneven surafce etc complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood or wood based surfaces over 10 cms width or girth and applying one finishing coat of synthetic enamel paint on wooden surfaces complete all as specified and directed.

M&L for prepration of old plastered / decorated surfaces of walls and applying one coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed.

M&L for preparation of old wall surfaces of any description & applying one coats of acrylic (antifungal) exterior grade paint of plain/camouflage pattern on wall/roof complete all as specified and directed

M&L complete removal of existing trement of any description on wall surfaces,washing, rubbing down and stopping of distempered and painted surfaces and apply two coats of white wash on wall surface including preparation of surfaces with white birla putty filling on uneven surafce etc complete all as specified and as directed

M&L for applying 3mm thick wall care putty on even surface of wall complete all as specified and as directed,

M&L for applying 3mm thick wall care putty on even surface of ceiling complete all as specified and as directed,

Excavation in trenches not exceeding 1.5 meters wide and 1.5 meters in depth and getting out in hard/dense soil including cutting of roots any dia all as specified and directed.

Returning filling in inclding spreading, levelling, watering well ramming in layers not exceeding 25 cm thick all as specified and directed.

Removing excavated material /old debries etc to a distance not exceeding 50 meters and deposited where directed at level not exceeding 1.5 meters above the starting point.

S&F Hight strength, deformed steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking and binding with mild steel wire (annealed) not less than 0.90mm dia all as specified.

M&L for PCC 1:4:8 type D2 using (40mm graded stone aggregate) as in foundations, fillings & mass concrete etc all as specified and directed.

S&F salt glazed stone ware drain pipes 150mm internal dia, grade `A' laid in trenches and jointed as specified including demolition of existin old pipe comple all as specified and as directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded stone aggregated as in bed to 150mm bore drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C-1 using 20 mm graded stone aggregate as in coping bed plates, haunching benching ,water trough and the like including weathering, slightly rounded or chamfered angles and throating including use of necessary form work and finishing the surfaces even and smooth without using extra cement all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends

Demolition of Reinforced Cement Concrete of any description and in any position not therwise specifically provided for

M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in cover slabs and the like, set in cement mortar 1:6 with plain fair faces complete with joints to match all as specified and as directed.

Taking down carefully copper / aluminium point wiring (light, fan socket or power) through steel / PVC conduit / casing caping including complete fittings such as switches, ceiling roses, pendants, regulators, sockets, buzzer, bell, switch sockets, etc removing and making good to the disturbed surfaces of walls/ceiling etc, with its original specification complete all as specified and directed.

M & L for point wiring with 1.5 sqmm (nominal area) PVC insulated and unsheathed multistranded FRLS copper conductor cable (using colour code as per IS), 1100 volts grade drawn through PVC conceiled conduit including necessary cutting chasing of wall and with all accessories including concealed sheet steel terminal/CI box with 3mm thick hylam/masonite sheet top including 1.5 sqmm size PVC insulated unsheathed copper conductor multistranded cable for continuous earth conductor (using green colour) to common earth and connecting to earth dolly, complete all as specified & directed for the following :-NOTE- The rates includes for Neccessary wall cutting chasing .

(a) One light / bell / fan point controlled by one switch SP one way 5 Amp 240 Volts

(b) One multi pin socket outlet 5 Amp independent

Ditto, all as per sl item No 136.00 hereinbefore, but using 2.5 sqmm ( nominal area) multistranded FRLS copper conductor cable/wire & 1.5 sqmm size PVC insulated unsheathed copper conductor cable for earth continuity ( green colour) for one 5 pin socket outlet 5 / 15 Amp multi purpose independent point controlled by 15 Amp switch, SP one way, 240 Volts & Socket, complete all as specified and directed.

S & F switch piano flush button single pole one way, 6 Amp (ISI marked) all as specified and directed by Engineer-in-Charge

S & F switch socket 2 in 1, 3 pin, 6 Amp flush type (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S & F switch socket outlet 15 Amp, 5-in-1, controlled by one switch (ISI marked) complete all as specified and directed by Engineer-in-Charge.

S & F ceiling rose surface bakelite 65 x 50mm, three terminals ISI (Marked) complete all as specified and directed by Engineer-in-Charge.

S & F socket type EME fan 5 step regulator for ceiling fan metallic frame and copper plates of suitable size, complete all as specified and directed by Engineer-in-Charge.

S & F replacement MCB SPN 240 V, 50 Hz, 10 KA conforming to IS 8828 of rating 25 to 32 Amp 'C' series complete all as specified and directed by Engineer-in-Charge.Make: Legrand/Havells/L&T

S & F replacement MCB SP 240 V, 50 Hz, 10 KA conforming to IS 8828 of rating 6 to 32 Amp, 'C' seriescomplete all as specified and directed by Engineer-in-Charge. Make: Legrand/Havells/L&T

S & F replacement MCB DB, SPN, 8 way, 230 Volts as per IP-42 of complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Havells/L&T

S & F replacement MCB DB TPN 4 ways 415 Volts, as per IP-42 of complete all as specified and directed by Engineer-in-Charge. Make: Legrand/Havells/L&T

S & F replacement MCB TPN 63A, 415 V, 50 Hz, 10 KA conforming to IS 8828 of rating 6 to 32 Amp, 'C' seriescomplete all as specified and directed by Engineer-in-Charge. Make: Legrand/Havells/L&T

Supply and fix LED suspension tube light type light 36w including making arrangementfor hanging the fitting of Havells DESTELLO SUSPENED Cat Part No. DESTELLO70LP/S36WLED857SPMMAWH including jointing kit and main cable or equivalent in PHILIPS/ CG complete with all accessories as specified and directed.

Supply and fix LED batten with 18W LED tube light in wall/surface connecting with all required accessories like PVC box base,flexible cable from ceiling rose etc Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver and including LED tube rod.as directed and specified by engr-in-charge.Make havells CT PT NO- LHEXBLP7UN1W018 or equivalent in CG / C &S

Supply, fixing, stringing and drawing submain wiring with 2 run of single core 6 Sqmm PVC insulated and unsheathed, multi stranded FRLS copper conductor cable using colour code for phase red and neutral black with and including 4 Sqmm PVC insulated and unsheathed copper conductor multistranded cable in green colour connected to common earth point and connected to earth dolly drawn through 20 mm PVC conduit, heavy grade (ISI marked) with and including all accessories etc in replacement compete all as specified and directed

NOTE:- (i) Two run of 6 sqmm, one run of 4 sqmm earth continuity conductor and 20 mm PVC conduit and accessories shall be measured and paid as one length.

Taking down ceiling fan and keeping in safe custody for reuseand refixing the same after duly painted and making of MES number on ceiling fan of size 1200m sweep complete wih connceted accessories as directed by Engg-in-Charge.

Shri Krishna Trading Corporation

SREE HARITHA ASSOCIATES

Colaba Group Works

Mahadev Enterprises

Sagar Electricals

LAXMI ENTERPRISES