SPECIAL REPAIRS TO BUILDING No P347 AND PROVN OF ENT CONOPY STAIR CASE AND ALLIED WORK IN TECH AREA UNDER AGE BR II AT BAMRAULI

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 10 mm thick double charged vitrified ceramic digital coloured tiles of size 900mm x 900mm (or) 120mmx600mm (or) 1200mm x1200mm joint less (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. Note :- Tiles shall be of premium quality and shade shall be as approved by GE.

All as per Item No. 2 above but as in skirting set & jointed in neat slurry and pointed in white or colour cement to match the shade of tile over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed. Note :- Tiles shall be of premium quality and shade shall be as approved by GE.

M&L for 10 mm thick Non-skid ceramic digital light shade coloured tiles (square/ rectangular) polished, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed. Note :- Tiles shall be of premium quality and shade shall be as approved by GE.

M&L for glazed ceramic digital coloured tiles in vertical surfaces of size 300x600x7 to 10mm (or) 300x450x 7 to 10mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile over and including 10mm thick backing coat in CM (1:4) complete all as specified and directed. Note :- Tiles shall be of premium quality and shade shall be as approved by GE.

Dismantling of stone slab of any description or any thickness in floor aprons etc in laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 18- 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, around door frame and like, jointed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Providing and fixing 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and applying two coats plastic emulsion paint over a coat primer suitable for gypsum board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame ofperimeter channels suitably fixed, horizontal / vertical/ circular location including necessary scaffolding for the height of false ceiling upto 4 mtr complete all as specified and directed by the Engineer-in-Charge and as per manufacturer’s instructions.

M&L for 80 to 100mm high straight/ circular cove with special section & gypsum board including applying .2 coats plastic emulsion paint over a coat of suitable approved primer for gypsum board and plastic emulsion paint complete all as specified and directed.

M&L for 100 to 150 mm high straight/ circular cove with special section & gypsum board including applying .2 coats plastic emulsion paint over a coat of suitable approved primer for gypsum board and plastic emulsion paint complete all as specified and directed.

M&L for POP designer cornices to match the ceiling as approved by GE including applying .2 coats plastic emulsion paint over a coat of suitable approved primer for gypsum board and plastic emulsion paint complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying two coats of plastic emulsion paint over a coat of primer (for plastic emulsion paint) with a thin layer of 1.5 mm thick wall care putty complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area n exc 1.5 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces in CM 1:3 complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but n. exc 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces in CM 1:3 complete all as specified and directed.

S&F 12mm thick plain toughened glass door with hole and cutout including one set of floor springs, 2 x Big L stainless steel at corner, 08 x L connector of stainless steel and 2x 25 mm dia and 600 mm long stainless steel handle, itching on glass and engraving of Triveni sports complex logo as per drawing/sketech/design etc complete all as specified and directed.

S&F 12mm thick plain toughened fixed glass in door/window opening / partition with stainless steel grade/type 304 fixtures etc complete all as specified and directed.

S&F Stainless steel concealed door closer/over head in floor mounted best quality suitable for door shutters of 851 to 1000mm in width etc complete all as specified and directed.

S&F Rebated mortise aluminium lock vertical type size 100mm with 4 levers complete all as specified and directed.

S&F for powder coated anodised aluminium frame/shutters for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

M&L for anodised aluminium powder coated door shutters, aluminium section weighing 1.5 kg/m ( minimum) including all necessary fittings, joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws and lock etc complete all as specified.

S&F for powder coating Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m (minimum) including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.) complete all as specified and directed. Note:- Minimum thickness of powder coating shall be 50 micron.

S&F for 12 mm thick tinted glass ordinary quality and glazing with rubber beading for alluminium doors/windows as required complete all as specified and directed.

S&F 5.50 mm thick tinted glass and glazing with rubber beading for alluminium doors/windows as required complete all as specified and directed.

S&F 100 mm long stainless steel butt hinges complete all as specified and directed.

S&F aluminium door closer hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 Kg complete all as specified and directed.

S&F aluminium handle of size 150mm in circular shape for pull of door shutter complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F in repairs stainless steel decorative type drapery rod finial, end socket etc complete all as specified and directed. Make of drapery rod shall be of VISTA model No. Victorian series finial SW-13 (or) Classic Notes:- (i) Brackets shall be measured and paid separately under respective item of this schedule (ii) Drapery rod, finial shall be of same make.

S&F stainless steel/ brass chromium plated decorative bracket fancy type double slotted suitable to receive drapery rods as catered above complete all as specified and directed.

S&F Beige 3D Paisley design peel and stick self adhesive wallpaper by 100 yellow (or) any other make as approved by GE complete all as specified and directed

Taking down and refixing of existing PVC cup board complete all as specified and directed

S&F in repairs PVC cabinet box and shutter made out of 18 mm thick one side PVC prelaminated wood grain board and shutter fixed on the PVC frame with auto hinges and steel screws including fancy type stainless steel handles complete all as specified and directed. Note :- Size of cabinet not more than 90 cm wide.

S&F in repairs PVC cabinet frame of size 18mm x75mm made out of 18mm thick PVC board wood grain colour and frame fixed with 50mm long steel screw inside using drilling machine and plastic fasteners complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (one piece type) ivory colour with PVC sheet cover & flushing cistern, flushing pipe including making good the floor with adjacent floor finishing and making connection to flush pipe etc complete including making functional and removal rubbish/waste materials to a distance n. exc 50m, complete all as specified and directed. Make of WC including all accessories : Hindware Cat No 92043 [INOX] (or) CERA-COMFY Cat Part No 2075 (or) any equivalent model in Jaquar/Parryware

S&F in repairs oval shape vitreous china wash basin under counter of ivory colour complete all as specified and directed. Make:- Jaquar Cat Part No. CNS-705 (or) equivalent model in Hindware/Cera/Parryware as approved by GE.

S&F in repairs Urinal pot full-stall type including all accessories complete all as specified and directed. Make:Hindware/Parryware/ Cera

S&F in repairs brass chromium plated pillar tap basin mixer, screwed for iron pipe etc complete all as specified and directed. Make:- Jaquar Cat Part No. QQT-7011 (or) equivalent model in Hindware/Cera/Parryware as approved by GE.

S&F in repairs 15 mm bore angular stop cock fancy type, cast copper alloy of , screwed down, high pressure both ends for iron pipe or for unions and fixed complete all as specified and directed. Make:- Hindware Cat Part No. F190003 (or) equivalent model in Jaquar/Cera/Parryware as approved by GE.

S&F in repairs chromium plated 15 mm dia bib tap cast copper alloy with fancy screwed for iron pipe complete all as specified and directed. Make:- Hindware Cat Part No. F190002 (or) equivalent model in Jaquar/Cera/Parryware as approved by GE.

S&F in repair chromium plated push cock for urinal 15 mm dia cast copper alloy with fancy screwed for iron pipe complete all as specified and directed. Make:- Hindware/Jaquar/Cera as approved by GE.

S&F in repairs stainless steel swivel towel holder 300 mm long complete all as specified and directed. Make:- Jaquar Cat Part No ACN-1101S (or) equivalent model in Hindware/Cera/Parryware as approved by GE.

S&F in repairs stainless steel toilet paper holder with stainless steel flap complete all as specified and directed. Make:- Jaquar Cat Part No ACN-1153S (or) equivalent model in Hindware/Cera/Parryware as approved by GE.

S&F in repairs soap dispenser with metallic bottle complete all as specified and directed. Make:- Jaquar Cat Part No. ACN-1137N (or) equivalent model in Hindware/Cera/Parryware as approved by GE.

S&F in repairs corner glass shelf with bracket complete all as specified and directed. Make:- Jaquar Cat Part No. ACN-1173 (or) equivalent model in Hindware/Cera/Parryware as approved by GE.

S&F in repairs towel rack 600 mm long without lower hanger but with 3 hooks complete all as specified and directed. Make:- Jaquar Cat Part No. ACN-1181FHS (or) equivalent model in Hindware/Cera/Parryware as approved by GE.

S&F in repairs Health faucet ABS stainless steel Braided Hose 1 m with chromium plated hook complete all as specified and directed. Make:- Hindware Cat Part No. F160068/F160068IV (or) equivalent model in Jaquar/Cera/Parryware as approved by GE.

S&F in repairs CP connection 600 mm long braided hose with M10X1 nipple, 15 mm nut , O ring and rubber washer for 15 mm bore of pipe complete all as specified and directed. Make :- Jaquar Cat No ALD-CHR- 801B (or) equivalent model in Hindware/Cera/Parryware as approved by GE.

S&F in repairs looking mirror of 5mm thick glass including hanging arrangements and provision to receive LED back lights to give glow and decent look from out side complete all as specified and directed. Note :- LED lights will be measured and paid seperately.

Taking up or down 15 mm bore steel water tubing and connections complete and all as specified.

Taking up or down 20 mm bore steel water tubing and connections complete and all as specified.

S&F 15mm bore galvanised steel water tubing medium grade with all fittings fixed to walls, laid in floors/ceiling including concealed etc all as specified and directed.

S&F 20mm bore galvanised steel water tubing medium grade, with all fittingd fixed to walls, laid in floors/ceiling including concealed etc all as specified and directed.

S&F in repairs cast iron floor trap 75 mm dia of outlet with stainless steel grating including jointing to waste pipe in run led joint complete all as specified and directed.

S&F in repairs 100 mm dia cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete 1:2:4, type B1complete all as specified and directed.

Taking out eaves gutters and rain water pipe (any size or pattern) including all fittings complete all as specified and directed.

S&F 110mm bore PVC (SWR) pipe single socket in any length with rubbepr ring joints fixed to walls with PVC clamps complete all as specified and directed.

S&F PVC (SWR) 75mm bore pipes single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F for PVC (SWR) Junction single (Single T) equal or unequal of 110mm with access door etc. complete all as specified and directed.

S&F for PVC (SWR) Junction single (Single T) equal or unequal of 75mm with access door etc. complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends plain (any radius) complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends plain (any radius) complete all as specified and directed.

S&F in repairs chromium plated grating 100mm dia complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not other specifically provided for complete all as specified and directed.

M&L 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in roof padding on existing roof slab to slope as per existing or as directed including finished the surface fair and even complete all as specified and directed.

Provision of Roof treatment consisting of the following items and operations complete all specified and directed :- (a) M&L for rendering 10mm thick in cement mortar (1:4) over concrete surfaces of roof, mixed with liquid water proofing compound @ 200 ML per 50 Kg by weight of cement or as per manufacturers instruction including finishing surfaces even and fair without using extra cement complete all as specified and directed. (Water proofing compound will be measured and paid separately) (b) Cleaning the roof surface from dust / dirt and any other foreign materials and applying a coat of bituminous primer @ 0.30 liters per square meter uniformly after the surfaces fully dried complete all as specified and directed. (c) M&L for applying a coat of hot blown bitumen grade 85/25 conforming to IS 702 over primed surface of roof slab @ 1.20 Kg/Sqm complete all as specified and directed. (d) M& L for APP based polymeric water proofing membrane minimum weight 3 Kg/ Sqm and minimum 3mm thick reinforced with polyester non wove fabric (Weight not less than 150gms/Sqm or as per IS), laid over hot bitumen surface by torched application with the strict supervision of manufacturers technical supervisor. Membrane shall be laid with 100mm side/end lap on prepared surface as per manufacturer instruction work shall be carried out strictly with the technical tradesmen and supervision of technical staff of manufacturer complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick heavy duty floor tiles of area of each tile exceeding 0.18 Sqm but not exceeding 0.36 sqm including laid over 15 mm thick screed bed in CM 1:4 complete all as specified and directed.

S&F stainless steel railing of 304 grade/type including 8 mm toughened glass and stainlees steel fixtures of 304 grade/type 0.90 mtr height) as per design approved by GE and complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking out for key, scrubbing down with water etc complete all as directed.

M&L for cleaning with the wire brush as in flooring / walls / chajjas to dry and apply one coat of URP and cement in ratio 1:1 @ 1liter per Sqm and after drying of this process applying two coats pidifin 2K treatment including base coat as per manufacturer instruction mixed with cement in cement in ratio 1:1 @ 1liter per Sqm with minimum interval of 4 hours in each coat, including 15 mm thick rendering in CM 1:4 complete including finished even & smooth without using extra cement complete all as specified and directed. Make of chemical : Dr.Fixit. Note:- (i) Guarantee for a period of 10 years shall be obtained from the Dr Fixit and same shall be submitted by contractor. (ii) All rates including the supply and applying Dr fixit chemical and work to be executed with authorized technician of Dr Fixit.

Demolition of brick work stone boulder masnary built in cement mortar including all quoins arches pillars, etc complete all as directed.

M&L brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6 M mean radius built in CM (1:6) complete all as specified and directed

M&L for complete removal of existing treatment of old plastered surfaces of walls and applying Acro Marmo Castello finish comprising of silicon and ceramic based texture finish which is highly elastic and is abrasion & UV resistant with 2 or more coat system highly water repellant, anti algae & anti fungal, heat reflective, fire resistant and low of VOC in nature . The coating covers minor hairline cracks with application methad which includes 1 coat of Polyunder ( sealer coat) with roller/ brush/ spray, one coat of Marmo Castello Sone in approved shade and pattern as top coat with stainless steel trowels all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of WALLS and applying two coats of oil bound distemper over a coat of alkali resistant primer over a thin layer of 2 mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of old plastered surfaces of CEILING and applying two coats of oil bound distemper over a coat of alkali resistant primer over a thin layer of 2 mm thick wall care putty complete all as specified and directed.

S & F mild steel frame work for stair case including necessary welding , landing plates etc complete all as specified and as directed.

M&L for preparing old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic emamel paint complete all as specified and directed.

M&L for preparing old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic emamel paint complete all as specified and directed.

S&F 10 mm thick plain toughened glass for shelves of bar counter including stainless steel 304 grade/type brackets/fixtures to hold the glass in a fixed/rigid position complete all as specified and directed.

S&F 5 mm thick mirror glass of approved quality/make for bar counter/cabinet walls fixed with and including necessary adhesive as per design approved by GE complete all as specified and directed.

S&F in repairs shower panel made of anti-finger print stainless steel body, in-built ABS top shower with 60 nozzles+ water fall, 2 movable ABS body top shower with 60 nozzles + water fall, 2 moveable ABS body massage Jet, head shower with flexible hose, shelf, brass faucet body with thermostat mixer and 40 cm stainless steel barbed hose, multifunction water diverter for top shower, 1.5cm stainless steel double locked flexible hoses complete all as specified and directed. Make : Jaguar Cat No. JPL-SSF-ST88158B or equivalent model in Hindware/Cera as approved by GE

S&F 12 mm thick toughened glass including engraving of logo of Triveni Sports Complex as per design approved by Garrison Engineer and fixed with suitable stainless steel fasteners/fixtures complete all as specified and directed

Excavating in post holes (or similar holes) each not exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in hard/dense soil complete all as specified and directed

M & L for PCC 1:2:4, type C2 [Using 40 mm graded stone aggregate] as in foundations, filling and mass concrete complete all as specified and directed.

Design, supply and fixing of 12 mm thick toughened glass ( plain / curved) on top of canopy including necessary fixing accessories of SS 304 Grade and sealants all as specified and directed.

S&F modular mild steel space frame consisting of bend circular tublar sections, mild steel columns, mild steel plate, mild steel screws bolts any type and dia and applying 02 coats of ducco pait over a coatof suitable primer including preparation of surfaces complete all as specified and directed.

S & F for mild steel frame work for stair case including necessay welding , landing plates etc complete all as specified and as directed.

M & L for applying two coats of synthetic enamel paint over a coat of red oxide primer on newly steel surfaces of any description over 10 cm in width or grith, not otherwise described including preparation of surfaces complete all as specified and directed.

S & F 5 mm thick PVC false ceiling of approved design/make complete in horizontal / vertical/ circular location fixed to GI frame work at a height of 4 mt including necessary scaffolding complete all as specified and directed.

S&F Solid PVC wall lining consisting of 5mm thick wood grained printed any colour/ shade PVC sheet as approved by GEs inclusive of solvent cement and fixing at on PVC frame including taking down of existing wall lining complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling including fixing on wall to fix PVC frame etc complete all as specified and directed. Note for Sl Item No. 89 &90 :- The fixing of PVC wall lining shall be executed by authorised representative of manufacturer.

&F classic black steel hanging wine glass rack of size 750 mm wide and 375 mm deep/high contains 4 channels to store and display wine bottles, champagne and other stemmed glassware pieces. Glass Rack is constructed of sturdy with 50 mm wide x 3.12 mm thick metal that reflects a classically simple yet durable and beautiful wine rack. Steel surfaces shall be powder coated for a durable, long lasting finish and accented by the four 450mm long pieces of chromium plated hanging chains and the fitted chromium plated glass holder insert. The versatile classic black steel hanging wine glass rack is designed to accent the décor of your family room, kitchen or wine cellar and sized to fit above the bar or over an island. The overall capacity of the Glass Rack shall be 12 to 15 pieces complete all as specified and directed.

S&F glass partitioning system range that includes glass shower screens, changing rooms, glass cubicles and glass toilet cubicles for both single or multi cubicle units using following material :- [a] Cubicle Glass 10 mm toughened textured Glass in the form of sandblasted Glass (or) Etched Glass (or) Ceramic Frit Glass as approved by GE [b] Fittings :- (i) Stainless steel grade/type SS-304 fixtures/fittings (ii) Dampened hinges (iii) Adjustable pedestal legs (iv) Glass suspended from head rail (v) Spring loaded polished stainless steel lock arrangement (vi) Minimalist metalwork for frameless glass cubicle doors. Note :- The unit rate quoted is inclusive all necessary fittings/fixtures as required for complete job.

Supply, laying, jointing & testing of cross sectional area 10 Sqmm 4 core underground LT cables XLPE insulated, PVC sheathed, aluminium conductors, multistranded, armoured heavy duty, 1100 Volt grade laid in trenches/ducts/along poles/through pipe under road etc with new aluminium lugs including taking out old cable complete all as specified and directed. Note :- (i) Excavation, earth work, sand cushioning, protection cover and pipe will be measured and paid for separately under respective items of this schedule. (ii) Old cable shall be property of the contractor and necessary amount as per schedule of credit shall be deducted from contractor's due payments.

M&L for sub main wiring with 2 runs of single core PVC insulated and PVC Unsheathed, multi-stranded copper conductor of nominal area 6 Sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multi-stranded copper conductor of nominal area 4 Sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete all as specified and directed. Note:- (a) Two runs of 6.0 Sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment.(b) Quoted rate shall be deemed to be inclusive cost of cutting chases in wall for concealing conduit and making good to match with existing finish.

Taking down carefully aluminium batten point, wiring for light/fan/socket/bell or power point including all fittings i.e. switch, sockets, ceiling rose, regulators, batten holders, etc. complete and making good disturbed surfaces of wall/floor to match with the surroundings of wall/ceiling/floor etc including taking down old light fittings complete all as specified and directed. Note :- (i) The unit rate quoted is deemed to be inclusive of unscrewing of the serviceable fittings and fixture as directed and deposit in MES store yard. (ii) The unit rate quoted is deemed to be inclusive of cost of cutting chases for taking out concealed conduit and ditch for terminal box. (iii) Decision of GE shall be final and binding in respect of serviceability of fittings/fixtures. (iv) Exhaust fan and ceiling fan shall be taken down in under separate item of this schedule.

M & L for point wiring with PVC insulated, PVC unsheathed cable single core, nominal area 1.5 sq mm FR with stranded copper conductor 1100 volts grade drawn into and including rigid PVC conduit (concealed) 19 mm internal dia with all PVC conduit fittings such as Tees, elbows, bend, reducers etc and 1.5 sq mm unsheathed copper conductor earth wire connected to earth dolly including metal junction box , grid plate, base plate suitable for modular switches, sockets, regulators. Note:- (i) The unit rate quoted is deemed to be inclusive of cost of cutting chases for taking out concealed conduit and ditch for terminal box (ii) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire(3) Switches & sockets will be measured and paid for separately. For " One light/fan/bell point controlled by one switch single pole one way"

All as per Sl Item No. 96 above but one 3 pin 5 amp switch socket out let independent .

All as per Sl Item No. 96 above but one 3 pin 5 amps socket outlet on the same board with other switch complete .

All as Sl Item No. 96 above one 3 pin 5 Amps socket out let independent but below the switch board of light point in the same vertical plane

All as Sl Item No. 96 above one light point controlled by two 2 way switches 240 volt

All as per Sl Item No. 96 above but using 02 runs 4.0 Sq mm size for main cable and one run 4.0 Sq mm size as earth conductor for one 16 amp switch socket outlet on independent board.

S&F switch modular flush type 6A single pole one way, one module complete all as specified and directed.

S&F switch modular flush type 15/16 Amp single pole one way 240 volt one module complete all as specified and directed.

S&F modular switch socket 6 Amp 2 in 1 2/3 pin combined (Two module) complete all as specified and directed.

S&F modular switch socket 16 Amp 2 in 1 3/5 pin combined (Two module) complete all as specified and directed.

S&F ceiling rose surface bakelite 60x25mm three terminal complete all as specified and directed.

S&F modular type electronic step type fan regulator 240 volt 50 Htz 120 watt (switch/sockets type in shape) complete all as specified and directed.

S&F modular switch 2 way 6A 240 volt complete all as specified and directed.

S&F in replacement of existing defective energy efficient tube light fitting of 28/36/40 watts with LED light fitting of 21 watts 4 feet long integral sleek extruded aluminium housing LED channel with white acrylic cover wall mounted type including the taking down old unserviceable light fitting and depositing the same in MES store yard for checking of serviceability complete all as specified and directed Make :- Philips Cat Part No.BN021C LED20S PSU CDL GR (or) Havells Cat Part No. HEWEBP7IN1W020 (or) Crompton Cat Part No. LCCLB20-CDL

S&F 2 feet x 2 feet size 36 watt 240 volt 50 Htz system lumens 4400 LED luminaries with high transmitive diffuser suitable for indoor spaces aluminium housing complete all as specified and directed. Make:- Philips cat part No-RC380BLED36S - 6500 (or) Bajaj Cat Part No. BCTBLL 36W LED (or) any equivalent model in Havalls/Crompton as approved by GE.

S&F 1 foot x 2 feet size LED light fitting 36 watt 240 volt 50 Htz 120 lumen/watt luminaries with high transmitive diffuser suitable for indoor spaces aluminium housing complete all as specified and directed. Make :- Bajaj Cat Part No. BZRSLL 36 W GZ1 WH (or) equivalent model in Philips/Crompton/Havells/Wipro as approved by GE

S&F LED strip light with driver 240 volt 50 Htz lighting effects blue/warm white in 5 mtr length complete all as specified and directed. Make:- Philips/Crompton/Havells/Wipro as approved by GE

S&F high intensity swivel light 20 watt 240 volts made out of pressure die-cast aluminium housing IP20 cutout size 170mm complete all as specified and directed. Make :- Syska model No-SSK-SWR-SMD-20W (or) equivalent model in Philips/Crompton/Havells/Wipro as approved by GE

S&F COB down lights 3 watts cut out 80 to 85 mm CRI more than 75 lumen 110/watt IP20 made out of thermoplastic complete all as specified and directed. Make :- Syska model No-SSK-LBD-0301 (or) equivalent model in Philips/Crompton/Havells/Wipro as approved by GE

S&F LED down light 240 volt 50 Htz 7watt , 3000/6500k swivel angle orientation frosted glass complete all as specified and directed. Make :- Syska model No-SSK-LETH-201F1-PA-7W (or) equivalent model in Philips/Crompton/Havells/Wipro as approved by GE

S&F AC starter unit consisting of one 25 Amps capacity starter, one MCB SPN, 25 Amps, 240 volts, 10 KA, one 25 Amps socket and one 25 Amps plug top prewired complete all as specified and directed. Make:- Legrand/Havells/Anchor/Siemens/C&S/L&T

S&F Fresh air fan, AC, single phase 230 volts of size 250 mm sweep, plastic body with louvers and making of hole & grouting, fixing nut & bolts and connecting with 3 runs of 1.5 sqm, single core, PVC insulated multi-stranded copper conductor FRLS cable from ceiling rose and making good the disturbed surfaces with existing colour matching complete all as specified and directed. Make :- Havells Cat Part No Ventil Air DX or equivalent model of Usha/Crompton/Bajaj/Almonard

S&F exhaust fan 450 mm sweep, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery discharge 6120 CMH suitable for SP, 230/250 volts, 50Hz, AC supply with louver shutter complete in existing opening and connecting with and including 3 runs of 1.5 Sqmm single core, PVC insulated but unsheathed FRLS multi-stranded copper conductor cable from ceiling rose to fan and taking down existing exhaust fan complete all as specified and directed.Note :- Old exhaust fan shall be deposited in the MES store yard of GE Bamrauli and necessary receipt voucher be obtained before claiming the payment against this item.

Supply, fixing/connecting and testing LED street light 25 watt 6000k new generation energy saving and environmental friendly long life versatile pressure die-cast aluminium housing IP-66 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with and including medium grade 40mm dia GI pipe ( not less than 1.20 RM) as bracket including taking down old light fitting complete all as specified and directed. Make: Philips/Crompton/Havells/Wipro as approved by GE

S&F LED batten extruded surface mounting light fitting 2 feet long aluminium housing 10 watts input voltage, 220 volts, inbuilt LED and driver complete all as specified and directed. Make:- Philips Cat Part N. BN021LED 10S (or) equivalent model in Crompton/Havells/Wipro as approved by GE

S&F LED flood light luminaries with secondary optics made in pressure die -cast housing and heat sink in aluminium IP-65 protection 240 volts, 50 Htz complete all as specified and directed. Make :- Bajaj Cat Part No-BJFL 80 W (or) equivelent model in Philips/Crompton/Havells/Wipro as approved by GE

S&F LED flood light luminaries 50 watt lighting effects green IP-65 protection, 240 volts, 50 Htz complete all as specified and directed. Make :- Philips/Crompton/Havells/Wipro as approved by GE

Supply, fixing, installation and testing of water heater storage type (Geysers) of capacity 50 litres, BEE 5 star rated with steel tank, ABS body, ISI Marked including pressure valve and providing electric and water supply connection complete and including grouting nut and bolts 100 mm x 15 mm for hanging the geysers and plastering and finishing of plastered surfaces of wall as per existing finish complete all as specified and directed.

S&F Factory made sheet metal enclosure distribution boards, (Protection class IP-65) double door, vertical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, Single pole neutral, 12 ways, 240 volts, Note :- MCBs will be measured and paid for separately under respective item of this schedule.

S&F Factory made sheet metal enclosure distribution boards, (Protection class IP-42) double door, vertical type suitable for mounting MCCBs/ MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, triple pole and neutral, 8 ways, 415 volts complete all as specified and directed. Note :- MCBs and MCCBs will be measured and paid for separately under respective item of this schedule.

S&F MCCB, three pole, 415 Volt ,125 Amp rating, 35 KA ultimate breaking capacity complete all as specified and directed.

S&F MCB, SP 6 to 32 Amp rating, 230 volts, 10 KA, 50Hz, C series complete all as specified and directed.

S&F MCB SP, 35 to 63 Amp rating, 230 volts, 10 KA, 50Hz, C series complete all as specified and directed.

S&F MCB SPN 63 Amp rating, 230 volts, 10KA, 50 Hz, 'C' series complete all as specified and directed.

Earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire 4mm dia as earth lead wire by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in Electrical plate No. 3, MES SSR Part I- 2009 with 15 mm dia medium grade GI pipe as a protection to earthing lead and 20 mm dia medium grade GI pipe for watering purpose including excavation & earth work in any type of soil, funnel, wire mesh, RCC pit with cover, cast iron frame complete and connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed. Notes (i) The concrete pit shall be PCC (1:3:6) type C-1, 40mm thick precast cover slab of RCC with suitable Mild steel handle in lieu of cast iron cover shown in electrical plate No 3 of MES SSR Part-I (ii) PCC pit shall be provide at least 500 mm away from the earth pit and not on just on the eath pit and extra cost of additional length of water pipes and fittings junction etc shall be deemed to be included in the rate. (iii) Item includes the cost of 7.5 metre earth lead wire and GI pipe for protection of earth wire. Any varriation in quantity shall be adjusted.

S&F test point terminal block made of gun metal or phosphorous bronze size 75x75x25 mm drilled and screwed including 3 Nos 8mm dia 25mm long hexagonal head screws complete all as specified and directed.

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtrs in depth for laying of cables including getting out in any type of soil complete all as specified and directed.

Returning, filling in including spreading, leveling and well ramming in layers not exceeding 25 cm each layer of any type of soil complete all as specified and directed.

Removing surplus excavated material/soil to a distance not exceeding 50 mtrs from the starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Supply and lay clean river bed sand as sand cushioning for cables 8 cm below the cable and 15 cm above the cable complete all as specified and directed. Note :- Punned thickness will only be measured and paid.

Supply and lay old size bricks, well burnt, laid flat, for cable protection complete all as specified and directed.

M&L for replacement of GI tubing light grade 50 mm bore for passing through cables under the floor, along the wall or along the pole complete all as specified and directed .

S&F LED cabinet light with swivel and angle orientation to adjust the spot, 3 watt, 240 volt 50 Htz, shape round cut out 43mm lumen made out of pressure die-cast aluminium housing complete all as specified and directed. Make:- Syska Model No- SSK-SW-R-3W-C or equivalent model in Philips/Havells/Crompton/Wipro.

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material.

M/S KESHRI WORKERS

M/S SURISONS

Mohit Enterprises

MOHAMMAD RIZWAN CONTRACTOR

HIMANSHU TRADERS

M/S SWASTIK BUILDERS

R K CONSTRUCTION COMPANY