HIDCO/GM (Elec)_eNIT-233/2024-25

Amount

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) 19mm dia 3mm thick Polythene Pipe

Supplying and fixing polythene pipe complete with fittings as necy. under ceiling/beam, bound with 22 SWG GI binding wire incl. supplying and drawing 1x18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction) 32mm dia 3mm thick Polythene Pipe

Supply and fixing 415V. 8 way, Double Door TPN MCB DB (ABB/Schneider make) with IP 42/43 protection with 40A Four pole Isolators as incomer (ABB/Schneider make) and 12 Nos. 16-32 A SP MCB (min. 10kA) (ABB/Schneider make) as outgoing, concealed in wall after cutting the wall and mending good the damages to original finish including interconnection and terminations with suitable size of copper wire, duly socketed by solderless Copper Socket and neutral link and provision for earthing attachment, as per direction of E.I.C.

Supply & Fixing, on prefixed rising main, 415V. 400A. TPN SFU in sheet steel enclosure with Cable End box at both ends, complete with 3 Nos. HRC Fuse as per G.S. and as per direction of E.I.C. (ABB/Schneider make)

Cutting channel of 40 mm x 40 mm size on masonry wall incl. S&F heavy gauge polythene pipe dia as stated below, by means of iron hooks and supplying and drawing 18 SWG GI Wire as fish wire incl. mending good damages to building works. 19 mm dia 3 mm thick polythene pipe without earth continuity wire

Making holes on RCC ceiling 125 mm depth having dia of following sizes : i) 125 mm depth, 75mm dia

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum-Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. i) 240mm x 200mm x 65mm

Supplying & Fixing bakelite / perspex top cover on existing inspection board by Brass screws. i) 240mm x 200mm x 65mm

Supply & Installation of Cubical type, totally enclosed L.T. Distribution Panel Board of suitable size made of 14 SWG CRCA sheet, angle/flat iron for structural frame work having both side cable alley, non-hygroscopic rust proof cable entry & separate individual SFU Chamber with necy. hinged door properly gasketed & mechanical locking arrangement comprising of the following Incoming & Outgoing switches, BBC & earthing attachment with 1 No. GI flat (32mm. x 6mm.) with nuts, bolts, washers etc. and neccy. Interconnection by suitable size of copper strip/rod incl. painting the complete panel board by phosphate powder coating paint after reqd. surface treatment by 7 tanks process/ sand blast fixed on wall with proper clamping arrangement as per direction of E.I.C. The Panel board consisting with following : INCOMING : a) 400 Amp 4P MCCB (36 KVA) – 1 No. (Make : ABB / Schneider) BUSBAR : 500V. Grade 4 Nos. 400A. Rating tinned copper Bar for 3Ph. & N fixed on porcelain chair made 14 SWG M.S. Busbar Chamber. OUTGOING : a) 250 AMp 4 Pole MCCB (25 KA) -- 02 nos. (Make : ABB / Schneider) b) 63 Amp TP MCB -- 20 nos. METERING : a) 3 Ph.Digital Ameter - 1 No. b) 3 Ph.Digital Voltmeter - 1 No. b) 630/5A. Ring type Current Transformer (Kappa) - 3 Nos. c) LED Indicating Lamp (Essen/ Siemens) - 3 Nos. d) 4A. HRC Control fuse with FuseBase (Make: Havells) - 3 Nos. e) Danger Board - 1 No.

Supply & Laying of 1.1KV grade 3½ core 300 sqmm XLPE Cable (Make : Havells / KEI / Polycab) on prefixed tray including S & F MS clamps with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making hole etc. as necy., mending good damages and painting. in underground trench

S & Laying 1.1 KV Gr. 3 x 6 Sq.mm and 2 X 4 Sqmm copper (Make : KEI / Polycab/ Havells) conductor through S & Drawing 40mm. dia rigid PVC conduit pipe (Precision M) to be fixed on prefixed tray as per G.S. (from VTPN to TPN DB).

S & Laying 1.1 KV Gr. 2 x 6 Sq.mm and 1 x 4 Sqmm copper (Make : KEI / Polycab/ Havells)conductor through S & Drawing 20mm. dia rigid PVC conduit pipe (Precision M) on prefixed tray as per G.S.

S & F compression type gland complete with brass gland, rubber rings for dust & moisture proof entry of PVC armoured cables as below as per G.S. a) 3½ Core 300 Sq.mm.

Finishing the ends of following cables by crimping method including S & F dowells solderless sockets, tapes and jointing materials etc. as per G.S. a) 3½ Core 300 Sq.mm.

Supply & fixing WIFI wireless socket Modular type (Make: Schneider/ ABB) with GI Modular board having top cover plate and making necessary connections as required.

Supply & fixing of 80 mm U-PVC pipe (I.S.I medium) for road crossing.

Making necessary arrangement for floor cutting of depth as per direction of EIC with Co's own Cutter machine with expert hands for the laying the PVC rigid conduit and mending good damages to original finish.

S & Drawing 19mm. dia 3mm thick polythine pipe and 2 x 2.5 Sq.mm. + 1 x 1.5 Sq.mm. PVC insulated multistranded copper wire (FRLS ) from PDB/SPN DB to Computer Board.

S & Drawing 19mm. dia 3mm thick polythine pipe and 2 x 1.5 Sq.mm. + 1 x 1.5 Sq.mm. PVC insulated multistranded copper wire (FRLS ) to different 5 Amp. Plug points/light points/fan points/call bell points.

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (Av. run – 10 Mtrs.) as per G.S. and direction of E.I.C.

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe (for horizontal & vertical run in wall and celing portion through prelaid polythen pipe) complete with all accessories embedded in wall to light/fan/call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC (Av. run – 6 Mtrs.) as per G.S. and direction of E.I.C.

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to 240 V 6A 5 pin plug point incl. S&F 240 V 6A 3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish 2x22/0.3 (Ph. & N) and 1x22/0.3 as ECC for on board Plug.

Supply & Delivery Single LED Fittings With LED tube (Make : Wipro / Jaquar / Klite) incl. 1x MAS LED (PC body) tube 1200mm 18W865 T8 I--2100lm. As per choice of EIC.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm flexible copper wire of 1.10 mt. length

Supply & Delivery surface mounted LED down light (Make : Wipro / Jaquar / Klite) Connection. SM 200C LED 11S 6500 PSU OD WH

Supply & fixing of flexible head mirror LED wall light of 11 W, 800lm, output, CDL (552mm x 36mm x 77mm). (Make-Klite / Jaquar/ Wipro / as per direction of EIC)

Supply and fixing 1200 mm sweep 230 volt A C Ceiling fan (make-Orient/Usha/Crompton) inclu. Blades, canopy etc. With 18" down rod(14SWG), Fork(10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board. (Make- As per direction of EIC)

Supply & fixing of Ventil Air Dx 200mm (Off White) exhaust fan on ply board after making hole in wall or glass/ply cutting and making good damages and smooth finish by cement etc. as practicable as possible and providing necy. length of PVC insulated wire and making necy. connection. (Make- Havells / Crompton / Usha), 8''(200mm) as per direction of EIC).

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed(soft soil)-For normal load

Extra for providing masonery enclosure on the top of the earthelectrode of overall size 86.36 cm x 86.36 cm x 46 cm deep(below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement morter (inside) CIhinged inspection cover of size 36.56 cm x 35.56 cm withlocking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 40 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required

Supply & Drawing 2 x 2.5sq.mm. copper wire as continuous earthing from earth bar to earth bus and to different earth terminal through 20 mm dia PVC rigid conduit as per GS.

Extra for providing masonery enclosure on the top of the earthelectrode of overall size 86.36 cm x 86.36 cm x 46 cm deep(below Ground level) complete with cemented brick work(1:6)of 25 cm width duly plastered with cement morter (inside) CIhinged inspection cover of size 36.56 cm x 35.56 cm withlocking arrangement, GI reducer including drilling of 46 nos.12 mm dia holes on the GI pipe

Extra for treatment of soil by using salt & charcoal or coke for plate / pipe electrode .

Providing and laying G.I. tape / strip 32 mm X 6 mm from earth electrode directly in ground as required.

Supply & Fixing of perforated GI cable tray with perforation not more than 17.5% suspended from ceiling incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. 200x50x1.25mm (18SWG) with 25x25x3mm angle iron support incl. Al painting of MS support.

Supply & Fixing of perforated GI cable tray bend with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. 200x50x1.25mm (18SWG) Incl. Al painting of MS support.

Supply & Fixing of perforated GI cable tray tee with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size.200x50x1.25mm (18SWG) Incl. Al painting of MS support.

Supply & Fixing of perforated GI cable tray cross member with perforation not more than 17.5% suspended from ceiling with two nos. suspenders & 25x25x3mm angle iron for supporting the cross member incl. S&F GI connector, 6mm dia MS suspender, bolts & nuts, steel fastener etc. as required of the following size. 200 x 50x 1.25mm (18SWG) Incl. Al painting of MS support

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Schneider / ABB /as per direction of EIC), without plug top on 2 Module GI type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply and fixing 250V 2+12 Way Double Door SPN MCB DB (ABB/Schneider make) with 63A DP Isolator as incomer and 12 Nos. SP MCB (min. 10kA) (Legrand/Schneider make) as outgoing, concealed in wall after cutting the wall & mending good the damages to original finish including interconnection and terminations with suitable size of copper wire, duly socketed by solderless Copper Socket and neutral link and provision for earthing attachment, as per direction of E.I.C.

Supply & Fixing of 25 Amp 4P MCB with Enclosure Box. (Make : ABB / Schneider)

Supply & Fixing of 16 Amp DP MCB with Enclosure Box. (Make : ABB / Schneider)

Supply & Fixing of 25 Amp DP MCB with Enclosure Box. (Make : ABB / Schneider)

Supplying and fixing of LED industrial type Bulk Head fittings on surface /wall mounting suitable for operation on 240 V, 50 Hz, single phase AC supply, complete with pressure die cast housing with IP 66 protection and IK 09 impact resistance including 10 W LED(make: Wipro / Jaquar / Klite).

Supply of 7 mtr. MS Steel Tubular Pole including 1500 mm. long Sword type Single ARM BRACKET made up of 48.3 mm OD GI pipe including 4 nos. M20 X 700 long "J" type EN- 8 grade foundation bolts along with template. This includes anti theft locking arrangement & loop box cover as directed by EIC.

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excavated earth pit with shifted soil and ramming properly, Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Earthing with 1 no.of G.I. earth spike [20 mm dia X 1.5 mtr long] driven into the ground up to 2mtr, drawing earth line with separate 4 SWG G.I. wires providing 15mm dia G.I. pipe protection 1 mtr. from earth spike Feeder Box/Junction Box,/ poles and fixing to the same by suitable nuts & bolts all complete as per direction of EIC.

Supply and delivery of LED street light fitting with pressure dia cast alluminium housing with IP-66 and IK not less than 08, conforming SMD 150 watt, lumen output (delivered lumen) >125 lumen / watt with BIS mark filled silicon potted driver, in built tilting arrangement upto 15 degree, supply voltage 140V - 270V, driver compatible with open voltage, short circuit, open circuit, sustain 440V for 15 min, 1 KV for 1 min, surge protection 10 KV, LM 79 & LM 80 report from NABL Lab, Make of LED lumileds, OSRAM, CREE. All LED must be high power LED (not less than 3 Watt individually) with ceramic package & heat pod minimum view angle of LED shall not be less than 125. (Make : Jaquar/Crompton/KLite)

Fixing of LED light fitting with 150 watt,on the top of the pole and also supply, delivery and fixing the loop box on the pole including Bakelite sheet (400 mm x 125 mm X 8mm), 4 way terminal 150 amps, Brass earth terminal, 150 amps Brass earth terminal 15 amps Fuse base and carrier including commissioning the same.

Supply and delivery 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes. (Make : KEI / Polycab /Havells). 4 core X 16 sq. mm.

Laying of 1.1 KV grade XLPE insulated stranded Alumunium conductor galvanised steel armoured cable of the following sizes in the under ground trench having 460mm wide X 760 mm. average depth with 8 nos. of brick protection per meter on the top of the cable including excavation of earth in cutting trenches filling space between the brick and cable and also the trench with shifted soil, leveling up and restoring surface duly rammed. I ) 4 core X 16 sq mm

Laying of 1.1 KV grade XLPE insulated stranded alumunium conductor through microtunneling / pole / pipe / pillar boxes of the following sizes cables. I ) 4 core X 16 sq mm

Supply and drawing of 3 core 1.5 sq.mm unarmoured copper flexible cable. (Make- Polycab/KEI/Havells)

Finishing the end of following XLPE cables by crimping method including supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials. I) 4 core X 16 sq mm

Supplying and fixing compression gland complete with brass gland , brass ring & rubber ring for dust & moisture -proof entry or XLPE armoured cables. I) 4 core X 16 sq mm

Supply & Installation of Cubical type, totally enclosed L.T. Distribution Panel Board of suitable size made of 14 SWG CRCA sheet, angle/flat iron for structural frame work having both side cable alley, non-hygroscopic rust proof cable entry & separate individual SFU Chamber with necy. hinged door properly gasketed & mechanical locking arrangement comprising of the following Incoming & Outgoing switches, BBC & earthing attachment with 1 No. GI flat (32mm. x 6mm.) with nuts, bolts, washers etc. and neccy. Interconnection by suitable size of copper strip/rod incl. painting the complete panel board by phosphate powder coating paint after reqd. surface treatment by 7 tanks process/ sand blast fixed on wall with proper clamping arrangement as per direction of E.I.C. The Panel board consisting with following : INCOMING : a) 250 Amp 4P MCCB (36 KVA) – 1 No. (MAke : ABB / Schneider) BUSBAR : 500V. Grade 4 Nos. 400A. Rating tinned copper Bar for 3Ph. & N fixed on porcelain chair made 14 SWG M.S. Busbar Chamber. OUTGOING : a) 63 AMp 4 Pole MCB (25 KA) -- 08 nos. (MAke : ABB / Schneider) METERING : a) 3 Ph.Digital Ameter - 1 No. b) 3 Ph.Digital Voltmeter - 1 No. b) 630/5A. Ring type Current Transformer (Kappa) - 3 Nos. c) LED Indicating Lamp (Essen/ Siemens) - 3 Nos. d) 4A. HRC Control fuse with FuseBase (Make: Havells) - 3 Nos. e) Danger Board - 1 No.

Supply & Fixing of outdoor type IP-66 without plug top on 6 Module GI type switch board incl. 63Amp 4P RCCB (30 mA) with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply and delivery 1.1 KV grade XLPE insulated stranded Copper unarmoured conductor galvanised steel armoured cable of the following sizes (Make: Polycab / Havells / KEI) i) 4 core 6 sq.mm. Copper Unarmoured Cable.

Supply and delivery 1.1 KV grade XLPE insulated stranded Copper unarmoured conductor galvanised steel armoured cable of the following sizes (Make: Polycab / Havells / KEI) ii) 3 core 6 sq.mm. Copper Unarmoured Cable.

Supply, insttallation, testing & commissioning of 320 kva silent dg set including amf panel, engine details : genset output (kva) - 320, capacity of engine - 9300 cc, rater engine power (kwm) - 256, type of engine colling - liquid cooled, type of governer / class of governer - g3 governing class as per iso 8528 part v, engine type - turbo charged, direct injection fuel system, number of cylinders / cylinder arrangement - 6, number of strokes - 4, rated rpm of engine - 1500, over speed trip (rpm) - 1650, overload capacity - permissable overload of 10% for 1 hour in every 12 hours of operation, air cleaner type / quantity - dry type with service indicator, exhaust system : maximum allowable back pressure, kpa - 5.1 +/- 0.5, engine electrical system : charging alternator voltage / current (dc) - 24 volt / 30 amps, starter motor rated voltage - 24 volt, battery type & specification - low maintenance free to is: 14257 for high cranking performance, battery voltage (dc) / capacity of battery (ah) - 12 volt x 2 x 150 ah. fuel tank : recommended fuel & consumption (gm / kwh) - 200 - 265, fuel tank capacity (ltr.) - 570, fuel tank sheet material thickness - 2 mm. lubricating oil system : lub oil sump capacity, high-low level (litre) - 35 ltr, oil change period (hrs) - 500 hrs, oil consumption (% of sfc) - 0.6%, oil filter quantity (nos) - 2 nos., oil cooler - water cooled. alternator : rating of ac generator - 320, voltage - 415 v, frequency - 50 hz, current (amps.) @ 0.8 pf - 445, power factor of ac generator - 0.8, efficiency at 75% of full load at rated frequency - 94.1%, type - revolving field, type of exciter - brushless, insulation class - h, voltage regulator - .+/-1%, voltage regulator grade - vg3, maximum unbalance load capability across phases - 25% control panel : type - standard / amf, ip rating - ip 23, indicators and audio alarm - low lube oil pressure, high water/coolant/cylinder head temp, low fuel lavel, over speed etc, display meters - multifuctional digital display meter, displayed parameters - displaying viltage, current, frequency, power factor. control panel : type - standard / amf, ip rating - ip 23, indicators and audio alarm - low lube oil pressure, high water/coolant/cylinder head temp, low fuel lavel, over speed etc, display meters - multifuctional digital display meter, displayed parameters - displaying viltage, current, frequency, power factor. acoustic enclosure (meet stringent moef/cpcb norms) : sheet thickness - 1.6 mm, thickness of foam / rock wool insulation - 50 mm, density of foam for sound insulation (kg/cubic m) - 46, noise level at 1 meter (db) - 75 (make : mahindra / jackson)

ANAMICA ENTERPRISE (BID ID -6247837)

Youngmen Traders (BID ID -6244886)