REPAIR / MAINT STORAGE TYPE WATER HEATER, SOLAR WATER HEATING SYSTEM INSTALLED AT VARIOUS LOCATION AND REPAIR / MAINT TO INTERNAL ELECTRIFICATION SYSTEM UNDER GE (AF) BAMRAULI

Amount

Repair/maint/overhauling/servicing by skilled technician of company as par existing make of solar water heating system including cleaning of solar plate,descaling of flate plate collector copper tubes with hydro chloric acid (Macdee), cleaning with metal brush,applying pressure pump,cheaking leakage, brazing if required,replacement of gasket, top up distilled water mixed with glycol in heat exchanger. Capacity 200Ltr capacity Make Kotak

Repair/maint/overhauling/servicing by skilled technician of company as par existing make of solar waterheating system including cleaning of solar plate,descaling of flate plate collector copper tubes with hydro chloric acid (Macdee), cleaning with metal brush,applying pressure pump,cheaking leakage, brazing if required,replacement of gasket, top up distilled water mixed with glycol in heat exchanger. Capacity 300 Ltr capacity Make Kotak complete all as specified and directed.

Taking up or down galvanised water tubing (medium grade) with all fitting from trenches/ walls/ floors/ ceilings and separating serviceable pipes and fittings for reuse in the work and removing unserviceable pipes and fittings from site of 25mm bore tubing including removing rusted MS clamps from walls etc.(where necessary),complete all as specified and directed.

Supply and lay galvanised steel water tubing (medium grade) complete with all fittings, fixed to wall and ceiling or laid in floors, including testing for 25 mm bore tubing, including replace the rusted MS clamps on walls/ ceilings etc. complete all as specified and as directed.

Fixing only after cleaning steel water tubing (galvanized) and connections with new GI fittings as retrieved from item No 2.00 here-in-before, fixed to wall ceiling or laid in floor after cleaning, washing or removing old screw thread as required and providing new fittings wherever required for 25mm bore tubing, complete all as specified and directed.

M&L for cutting existing steel tubing for alterations or additions (Each cut measured) for 25mm bore tubing, complete all as specified and directed.

supply and fix foam on GI pipe for insulation to heat dissipation covered with aluminium sheet of solar water heating system complete all as specified and directed.

Cleaning and removing all scales and dirt etc. from tanks of capacity exc. 500 litre and n.exc 1000 litre and also from mouth of circulating pipes, etc. complete all as specified and as directed.

Dismantling of old unserviceable water tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs and removing from site, and deposited to store ,complete all as specified and directed.

Supply, hoisting and fixing of multilayer, rotational moulded polyethylene water storage tank of capacity 500 ltrs (cylindrical vertical with closed top) in existing position including necessary connections of pipes, complete all as specified in SSR Part-I and as directed.

S & F in repair/replacement ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe & fixed, of dia 25 mm (min wt. 455 gms), complete all as specified and directed.

S & F in repair/replacement ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe & fixed, of dia 20 mm (min wt. -210 gms), complete all as specified and directed

Supply and fix hot water collector container made out of aluminium alloy ,2.7 gram/cubic cm moisture control system ,painted with electrostatic paint, glazy finish, reinforced corner bracket , size of the tank is as par the existing solar sytem, compatibility with existing flate plate collector of 100 Ltr capacity complete all as specified and directed.

Supply and fix hot water collector container made out of aluminium alloy ,2.7 gram/cubic cm moisture control system ,painted with electrostatic paint, glazy finish, reinforced corner bracket , size of the tank is as par the existing solar sytem, compatibility with existing flate plate collector of 200 Ltr capacity complete all as specified and directed.

Attending to Geyser complaints at site including checking and rectification of any electric fault/ water leakage and making good in all respects including minor repairs, replacement of unserviceable spares, burnt copper wire connections wherever required at complete area of GE (AF) Bamrauli complete all as specified and directed.

Supply and fix in replacement of fusible plug type air release valve complete all as specified and directed by Engr-in-Charge.

Supply and fix in replacement of gasket of thickness 5mm for geyser assembly of 06/08/09 holes complete all as specified and directed.

Supply and fix in replacement apparatus plate assembly of 06/08/09 holes suitable for 25/35/50 Ltrs geysers with suitable size of nut bolts/stud/washer complete all as specified and directed.

Supply and fix in replacement of indicating lamp for geyser rectangular /round type red/ green suitable for any type of geyser complete all as specified and directed.

Supply only sheet metal bottom/top cover of Geyser with existing size and gauge 18/20 SWG suitable for 25/35/50 Ltr complete all as specified and directed

Supply only glass wool of superior quality complete all as specified and directed.

Supply and fix in replacement of inner tank vertical type suitable for 25 Ltr geyser duly enamel coated steel tank of Geyser of gauge 18 SWG of capacity and making welding 4 side of geyser for stop falling of tank complete all as specified and directed.

Supply and fix in replacement of inner tank vertical type suitable for 35/50 Ltr geyser duly enamel coated steel tank of Geyser of gauge 18 SWG of capacity and making welding 4 side of geyser for stop falling of tank complete all as specified and directed.

Supply and fix in replacement rubber ring of existing size with mild steel ring clamp to lower and upper housing of geyser 25/35/50 Ltr complete all as specified and directed.

Supply and fix in replacement outer body of Geyser suitable for 25 Ltr capacity of geyser of 20 SWG mild steel sheet duly painted complete all as specified and directed.

Supply and fixing in replacement of outer body of Geyser suitable for 35/50 Ltr capacity of geyser of 20 SWG mild steel sheet duly painted complete all as specified and directed.

Supply and fixing in replacement of sheet metal enclosure single pole and neutral, earth plug & socket of capacity 20 Amp including one MCB SP, 20 Amp 10 KA, curve ‘C’ series complete all as specified and directed.

S&F in repair angle valve chromium plated cast copper alloy screwed down high pressure concealed type screwed both ends of size 15 mm bore complete all as specified and directed

S & F in repair gate valves (Gun metal globe valve) with iron wheel head, screwed both ends for iron pipe and fixed for 25 mm dia, complete all as specified and directed. Note: The quoted rate is deemed to be inclusive of cutting, threading, insertion of union joint, nipple etc for the required size of pipe.

S&F in repair bib tap chromium plated of size 15 mm bore complete all as specified and directed

M&L for soldering and brazing inner copper tank 50/25/35 ltrs with brass solder and refixing complete all as specified and directed. (taking down and fixing shall be paid under item No 86 above)

S&F in replacement of PVC insulated flexible copper wire 3 core of size 40/.0076 complete all as specified and directed.

S&F SS braided pipe of 12 mm (Internal) suitable for hot/cold water, 600 mm long with brass nuts and rubber washers complete all as specified and directed.

S&F SS braided pipe of 12 mm (Internal) suitable for hot/cold water, 450 mm long with brass nuts and rubber washers complete all as specified and directed.

S&F in repair thermostat switch suitable for geysers of capacity 25 ltrs of any make including star rated geysers complete all as specified and directed.

Supply and fix in replacement thermostat any type of geyser complete all as specified and directed.

Supply and fix in replacement heating element 1.5 KW, Triangle type with rubber gasket suitable for geysers of 25/50 ltrs if any make including star rated geysers of Bajaj/Racold complete all as specified and directed.

Supply and fix in replacement heating element 2 KW, triangle/round type with rubber gasket suitable for geysers of 25/50 ltrs if any make including star rated geysers of Bajaj/Racold complete all as specified and directed.

Supply and fix in replacement heating element modular type of capacity 2 KW, Modular type suitable for star rated modular type geysers of make Bajaj/ Racold with rubber gasket complete all as specified and directed.

S&F in repair plug top 15 Amp 3 pin complete all as specified and directed.

S&F in repair plug top 5 Amp 3 pin complete all as specified and directed.

Supply & fix in replacement PVC box comprising of switch socket combination multi - purpose 5 pin, 6/16 Amp box type complete all as specified and as directed.

Supply & fix in replacement PVC box comprising of switch socket combination multi - purpose 3 pin, 6 Amp box type complete all as specified and as directed.

M&L for in replacement plug top, 3 pin, 10/20 amp earth metal clad (ISI marked) complete all as directed.

S&F in replacement socket 3 pin 10/20 amp earth metal clad (ISI marked) as directed.

M & L for tape roll big size complete all as specified and directed.

M & L for in replacement fastner 100mm long & 6mm dia long with suitable size of nut for fixing geyser /Exhaust Fan complete all as specified and directed.

Attending complaint and rectifying any type of fault in internal electrification such as decarbonising connection in the DBs checking for disconnections any burning due to over loading in DBs and restoring electric supply,checking and repair of switch sockets, MCBs any type, repair of tube light fitting, any type, by replacement of worn out ballast, bipin holder, starter, worn out wire, repair of faulty fan by disconnecting and replacement of worn out part such as capacitor, fan regulator, worn outwire, repair of lamp by replacement of worn out holder wire, earthing, repair replacement of electric bell/buzer/bell push and other internal accessories i.e. switch socket etc. which needs to serviceable the electric supply. Note :- (i). Contractor shall be provided necessary T&P such as ladder, Earth, tester, Insulation tester, drill machine during rectification fault and nothing extra shall be paid to him on this account (ii). The cost of insulation tape shall be deemed to be included in the unit rate quoted against relevant item (iii) Complaint will be attended immediately as and when noted day and night

(a) Description all as above in item No-1 here-in-before but location 71 RMU

(b) Description all as above in item No-1 here-in-before but location 820 SU

(c) Description all as above in item No-1 here-in-before but location 14 P & SU

(d) Description all as above in item No-1 here-in-before but location Happy Home

(e) Description all as above in item No-1 here-in-before but location Begam Bazar

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC concealed conduit mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No. 51 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor drawn through new PVC casing caping mediem grade, ISI marked and including provision of 1.5 sqmm PVC insulated copper cable FRLS as earth continuty, fabricated branded modular metal flush box duly make embossed, concealed in walls with suitable modular inner and outer plate for housing switches , socket outlet and fan regulators etc, complete all as specified and as directed for the followings:-

(a) One light, fan, bell point controlled by one switch.

(b) One 3 pin switch socket outlet point 5 Amps on independent board.

(c) One 3 pin switch socket outlet point 5 Amps on same board with other switch.

All as per item No. 53 above here in before but with copper conductor cable for one 3 pin socket outlet, 15 amp independent, with cable 2.5 Sqmm size.

Supply and fix Switch piano 6 amps, single pole, one way, 230 volts

Supply and fix Switch piano 16 amps, single pole, one way 230 volts

Supply and fix Socket outlet 6 Amp 2pin & 3 pin, flush type

Supply and fix Socket out let, 16 amp and 6 amp, flush type

Supply and fix Electronic fan regulator 5 step 230 volts,switch type

Supply and fix Electronic fan regulator 5 step 230 volts, socket size

Supply and fix replacement Switch socket combination 2 IN 1 3 PIN 6/16 Amp 220 Volt flush type.

Supply and fix Lamp holder, insulated body, with back plate 230 Volt suitable for batten fittings.

Supply and fix Capacitor 230 volt, 1 Mfd all as specified and directed by Engr-in-Charge.

Supply and fix Capacitor 230 volt, 2.5 Mfd for ceiling fans

Supply and fix Capacitor 230 volt, 3.15 Mfd for ceiling fans

Supply and fix Switch modular type, 230 volts, single pole, one way, 10 Amp, one module.

Supply and fix Switch modular type, 230 volts, single pole, one way, 16 Amp one module.

Supply and fix Socket out let 5 pin, 10 Amp, 230 volts modular type.

Supply and fix Socket out let 5 pin, 10 amp & 20 amp, 230 volts modular type.

S&F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

S & F ceiling rose surface backlite 65x50mm 3 terminals complete.

Supply & fix PVC box comprising of switch socket combination multi - purpose 5 pin, 6/16 Amp box type complete all as specified and as directed.

Supply & fix PVC box comprising of switch socket combination multi - purpose 3 pin, 6 Amp box type complete all as specified and as directed.

Supply and fix calling bell ding dong type 220 volt 50 Htz

Supply and fix of driver for 2x2 feet LED panel of 36 watt of any model any make as par existing 240 volt 50 Htz 120 watt/lumen 6500k/2700k.

Supply and fix driver/ballast suitable for LED light 18 Watt

Supply and fix Rope light complete with adaptor.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts, > 2200 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix LED batten luminaire surface mounted, 2 feet system wattage of 10 Watts, > 1000 systems lumen outputwith lifetime of 50000 burning including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete all as specified and directed.

Supply and fix 2x2 LED fitting recess mounting flate panel 36 watt, down light 240 volt 50 Htz 150 luumen/watt comprising driver locking arrangement prewired completely.

Supply and fix adore LED lamp 3 star rating 5 watt lumen out put 500 Lm all as specified and directed by Engr-in-Charge.

Supply and fix 18 Watt LED tube 4 pin type ultra bright LED PL-L with high efficacy suited for installation in existing 2G11 lamp holder Havells cat part No-PLL419TL18WLED865SPC of equivelent from list of makes.

Supply and fix wall mounted decorative fancy type bedroom light LED type with frosted glass mounted on metalic frame with holder including 12 watt LED bulb Philips cat part No-45617 or equivelent list of make.

Supply and fix LED Tube rod fittings 4 feet long single side connection complete all as specified and directed.

S & F bed side lamp LED 3 Watt all as specified and directed by Engr in Charge. Make Philipis Model No 48042/30/3 and eqvt from list of makes.

Supply and fixing decorative wall light 2x 20 Watt TOR Compete all as specified and directed by Engr-in-Charge. Make Philips model No 3430/11C/86 and eqvt from list of makes.

Supply and fixing of Recess mounted complact vertical round shaped down light LED 5 watt suitable for low ceiling height complete all as specifie.

Supply and fixing of Recess mounted complact vertical round shaped down light LED 2 watt suitable for low ceiling height complete all as specifie.

S & F show case led lamp light 3 Wat complete all as spd and directed.

Supply and fixing of Recess mounted complact vertical round shaped down light LED 15 watt suitable for low ceiling height complete all as specifie.

S & F surface mounted, suare LED down light fitting12 watts with die cast aluminium housing and system wattage of 12W, including connecting up with PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

S&F in replacement PVC cable copper conductor multi strandrad flexible 23/76 twin core and making connections from ceiling rose to fan complete all as directed.

Supply and fix in replacement 1.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 2.5 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 4.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in replacement 6.0 Sqmm FR PVC insulated stranded copper conductor cable 1100 volts grade all as specified and directed.

Supply and fix in repair PVC gang box ISI marked three module for mounting one 5 amp socket & switch

Supply and fix in repair PVC gang box ISI marked three module for mounting one 15 amp socket & switch Make plaza/Anchor

Supply and fix in repair PVC gang box ISI marked six module for mounting two 5 amp socket & two switch

Supply and fix in repair PVC gang box ISI marked 9 module for mounting three 5 amp socket & three switch

Supply and fix in replacement white cover plate with frame three module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame six module for modular switches and sockets complete all as specified and directed.

Supply and fix in replacement white cover plate with frame twelve module for modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box three module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box six module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

Supply and fix metal flush box twelve module 1.6 mm for mounting modular switches and sockets complete all as specified and directed.

S&F hylum sheets 3 mm thick (ISI marked) 8" x 10" incl cuttings for switches and sockets 6/16Amps as directed.

S&F hylum sheets 3 mm thick (ISI marked) 10" x 12" incl cuttings for switches and sockets 6/16Amps as directed.

S & F terminal box of 1.6 mm thick suitble size for fixing 3 mm thick hylam sheet complete all as specified

Supply and fix bulkhead fitting enviornmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulkhead edgelit LED luminaire comprising of highbrightness LEDs of 10 watt

M&L for sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 6 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 6 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 6.0 sqmm cable and one run of 6 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

M&L for Sub main wiring with 2 run of single core PVC insulated and PVC Unsheathed, multistranded copper condutor of nominal area 4 sqmm FRLS, 1100 Volts grade cable drawn into and including rigid non metalic PVC Conduit of including all fittings and one run of PVC insulated and PVC unsheathed, multistranded copper conductor of nominal area 4 sqmm FRLS 1100 volts grade cable continuous earth wire of green colour code complete. Note:- (a) Two runs of 4.0 sqmm cable and one run of 4 Sqmm cable as earth lead with conduit shall be measured as one unit length for payment. (b) Quoted rate shall deem to be included cost of cutting chasses in wall for concealling conduit and making good to match with existing finish.

Supply anf fix Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertiical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 12 ways, 240 volts, Make Legrand/Hager/siemense Note : MCBs shall be measured and paid for separately under respective item of this schedule.

Supply and fix in repair Factory made sheet metal enclosure distribution boards, (protection class IP-65) double door, vertiical type suitable for mounting isolator fixing MCBs conforming to IS : 13032, IS : 8623, BS : 5484 with 200 Amps rating copper bus bar, SP and N, 8 ways, 240 volts,

S&F in repair factory made epoxy powder coated Distribution board (MCCB DB) TPN 4 way vertical type, IP - 43 Protection made out of min 1.6 mm thick CRCA sheet, fabricated, metal double door fixed to wall and suitable for universal mounting and including 200 Amps rated copper bus bar, neutral bar, standard DIN rail, earth bar and cable ties for cable management, top and bottom removeable gland plated with knockouts and suitable for TPN MCCB 125/160 Amps as incomer and 12 SP or 04 Nos TP MCBS as outgoing complete all as specified and confirming to IS : 8623 complete all as specified and directed.

Supply and fix MCCB, four pole, 415 Volt ,125 Amp rating, 10 KA ultimate breaking capacity fixed in DBs catered herein before.

Supply and fix MCCB, four pole, 415 Volt ,100 Amp rating, 10 KA ultimate breaking capacity fixed in DBs catered herein before.

Supply and fix MCB, tripple pole and neutral, 415 volts, 32 to 63 Amps rating, 10KA, "C" series fixed in DBs catered herein before.

Supply and fix MCB, SP, 6 to 32 Amp rating, 230 volt, 10 KA, 'C' series fixed in DBs catered herein before.

Supply and fix MCB, SP, 230 volts, 35 to 63 Amp rating, 10 KA, C series fixed in DBs catered herein before.

Supply and fix MCB, single pole and neutral, 230 volts, 40 to 63 Amp rating, 'C' series fixed in DBs catered here-in-before.

supply and fix connecting and testing LED street light 30 watt 6000k new generation energy saving and enviornmental friendly long life versatile pressure die cast aluminium housing IP-66 roadway luminaries with high power LED as light source and electronic driver complete with connection and accessories for fixing with with including grade 40mm dia GI pipe as bracket in appropriate length complete including taking down old light fitting

Supply and fixing in repair Exhaust fan 300/308 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers and for fixing of Exhaust fan and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge

Supply and fixing in repair Exhaust fan 230 mm sweep(steel Body) , 1250 RPM, non metallic resin body, single phase 240 volts AC 50 Hz including louvers and for fixing of Exhaust fan and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge

S&F in repair Fresh air fan motor of capacity 1/6 HP 230 volts, 50 Hz, AC supply suitable for 250/200 mm size Fresh air fan as per sample complete all as spd and directed.

Supply only exhaust fan motor capacity 1/4 HP 230 volts suitable for 230/300 mm size exhaust fan complete all as directed.

Supply only single pole and neutral enclosure with a two pin earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed.

Supply only 12W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz

Supply only 9 W LED Bulbs, high energy efficiency LED luminaries to be fitted on existing holders 240 V,50 Hz,

Supply and fixing in repair ventilating Fan 150 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fixing in repair ventilating Fan 200 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fixing in repair Ventilating Fan 250 mm sweep, non metallic resin body, single phase 240 volts AC 50 Hz including louvers, and copper cable 3 core of size 0.5 sqmm for connection from ceiling rose to fan complete all aspecified and directed by Engineer-in-Charge. Note : Old material deposited to MES store Yard

Supply and fix in repair wall mounted fan 400mm size, 230 volts , 50 Hz 1420 RPM with 90 degree oscillation and having speed control by pull cord system complete all as specified and directed.

M & L for in replacement for only twin core PVC insulated unarmoured cable 4 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor all as specified and directed by Engr-in-Charge.

M & L for in replacement for only twin core PVC insulated unarmoured cable 6 Sqmm Flat 1100 Volts with Aluminium multi stranded conductor all as specified and directed by Engr-in-Charge.

Supply and fixing Pedestal fan 450mm sweep 1400 RPM, 100 watt , air delivery 115CMM double bearing one year warranty complete all as specified and directed by Engineer -in-Charge.

M & L for tape roll all as specified and directed by Engr-in-charge.

S&F in replacement of decorative type wall mounted luminaire (Comet) with unbreakable poly carbonate materials suitable for 1x12 watt LED bulb B22 base complete all as specified and directed by Engineer in charge .

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items of this schedule. The same shall be recovered from various payment to contractor before handing over old material.

M/S A M ENTERPRISES

ANSARI REFRIGERATION

M/S V K MEHROTRA

oasis contractor builder and supplier

M.R. ENTERPRISES

Toshi Enterprises

FRIENDS N FRIENDS

M/S vibhuti enterprises

M/S SATISH KUMAR