Repairing & Painting Works of Quarters and Transit Camp at 220 kV New Melli GIS Substation

Dismantling and Demolishing

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Dismantling tile work in floors/wall and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in - charge. Nominal concrete 1:2:4 or richer mix (including equivalent design mix)

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer -in - charge.Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)

Chipping of unsound/weak concrete material from slabs, beams,columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges,making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge: 25mm average thickness

BRICKWORK AND PLASTER

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)

18 mm cement plaster in two coats under layer 12 mm cement plaster 1:5 (1 cement: 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement: 6 fine sand)

Neat cement punning.

Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers.

WATER SUPPLY, SEWERAGE AND BATHROOM FITTINGS

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

REPAIRINGS TO BUILDINGS

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-in-charge.

Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc.,removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account)

Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer-in-charge.

Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150mm dia upto 300mm.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

WALL TILES FLOOR TILES AND MARBLE POLISHING

Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg / sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying gang saw cut 16 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement : 4 coarse sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

PAINTING AND RELATED WORK

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. for External paint area on old work.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Applying primer coats with primer of approved brand and manufacture having low VOC (Volatile Organic Compound) content. with water thinnable cement primer on wall surface having VOC content less than 50 grams/ liter :

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. One coats

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade . Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface

Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats

CONCRETE/ BRICK WORK

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

STRUCTURAL REPAIRING WORKS

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer

Providing, mixing and applying SBR polymer (of approved make @minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved SuperPlasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument) 50mm thick in Grade M 25 with cement content not less than 330 kg per cum.

Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).

25 mm average thickness in 2 layers.

Providing and applying antifungal wash treatment using 3% solution of sodium pentachlorophenate, of reputed brand and manufacturer, on cleaned sand stone surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved except scaffolding).

Providing and applying efflorescence cleaner (or a 1:1 mix of white vinegar and water for mild stains), of reputed brand and manufacturer, on cleaned sand stone/plastered surface at desired locations as per direction of Engineer-in-charge (The rate is inclusive of all materials & labours involved including scaffolding).

Providing & Applying polymer modified, flexible cementatious negative side waterproofing coating with elastic waterproofing polymers on interior wall plaster surface in three coats @14.35 kg /10 sqm. one coat of self priming of cementatious waterproofing polymer(dilution with water in the ratio of 1:1) and two coats of cementatious waterproofing polymer (dilution with water in the ratio of 3:1 ) after scrapping and properly cleaning the surface to remove pre-existing paint film & loose particles till plaster is visible, complete in all respect as per the direction of Engineer-in-Charge.

Providing and fixing of 150mm wide Chicken wire mesh fixed with U nails 150 mm centre to centre before plastering. (As per CPWD Item no 13.1.8 (ii))

Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work

Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.) Epoxy injection grout in concrete/RCC work of approved make

Providing and inserting 10-12 mm dia PVC injection nipple in honey comb area and along crack line including drilling of holes of required diametre (20 mm to 30 mm) up to depth from 30 mm to 80 mm at required spacing and making the hole & crack dust free by blowing compressed air, sealing the distance between injection nipple with adhesive chemical of approved make and allow it to cure complete as per direction of Engineer In-Charge.

Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

Bars upto 12 mm diameter

Bars above 12 mm diameter

Applying priming coat: With ready mixed zinc-rich epoxy primer of approved brand and manufacture on steel galvanised iron/ steel works.

Floor cleaning by Hydrochloric acid or any other equivalent chemical suitable as required as per direction of Engineer-in-charge.

[Repairing & Painting Works of Quarters and Transit Camp at 220 kV New Melli GIS Substation]

Specification No.ER2/NT/W-CIVIL/DOM/E00/26/13040 /1000076209 /I-5964/Rfx-5005013523 dt 30.09.2026)

Enter following details of the Bidder

Name of Bidder

Address of Bidder

Contact Person

Designation

Mobile Number

E-mail ID

Place

BID FORM

Bidder's Name

Bid Proposal Ref. No.

Powergrid Corporation of India Limited [CF-17, Action Area-1C, New Town, Rajarhat, Kolkata-700156 TEL No.: 033-23242847]

Name of Package:

Specification No

Dear Sir,

We have read and examined the bidding documents relating to subject package. We declare that the package, if awarded to us, shall be executed strictly in accordance with bidding documents except for the variations & deviations all of which have been detailed out exhaustively in the Deviation Schedule. We agree that any additional conditions, if found in the proposal other than those stated in Deviation Schedule, save those pertaining to any rebate offered, shall not be given effect to.

Bid Security/ Earnest Money Deposit

We have enclosed a Bid Security /Earnest Money Deposit in the form of Bank Guarantee for a sum of Rs . If we fail to keep the bid open as aforesaid or make any modifications in the terms and conditions of the bid which are not acceptable to the Purchaser, we agree that the Purchaser shall, without prejudice to any other right or remedy, be at liberty to forfeit the said Bid Security/ Earnest Money Deposit absolutely

After the bid is accepted and the Contract is awarded to us, if we fail to commence the execution of the Contract to the satisfaction of the Employer, we agree that the Employer shall without prejudice to any other right or remedy be at liberty to forfeit the said Bid Security/ Earnest Money Deposit absolutely.

Bid Validity

All prices and price components stated in the bid are firm and not subject to any price adjustment, in line with the bidding documents. All prices and other terms and conditions of this proposal are valid for a period of 90 days from the date of opening of the bids.

Bid Prices

Our total price is for the entire scope of the work as specified in the bidding documents.

The rates and prices quoted by us include cost of all our obligations as per the bidding documents and are also deemed to include overheads and profits.

We understand that any arithmatical error in the Bill of quantities (BoQ) shall be corrected as per provision of bidding document. We agree to perform the Contract, if awarded to us, with the corrected prices.

We declare that items left blank in the BoQ will be deemed to have been included in other items. The total for BoQ shall be deemed to be the total price for executing the facilities covered under the BoQ in complete, whether or not each individual item has been priced.

Work Schedule

We fully understand that the time schedule stipulated in bid documents is the essence of the Contract. If this bid is accepted by you, we agree to complete the entire scope in accordance with the completion schedule indicated in the bidding document.

Security Deposit/ Contract Performance Guarantee

We agree that if our proposal is accepted, we shall abide by the relevant clauses in Conditions of Contract pertaining to submission of Security Deposit/ Contract Performance Guarantee

We further agree that if we delay the submisssion of Security Deposit/ Contract Performance Guarantee, the Employer shall be at liberty to impose suitable recovery for the period of delay as per the policy of Employer's organization in vogue.

We confirm that we stand committed to comply with all requirements of Social Accountability Standards i.e. SA 8000 (latest standard available at www.sa-intl.org) and maintain necessary records.

We, hereby declare that only the persons or firms interested in this proposal as principal or principals are named herein and that no other company, persons or firms other than those herein mentioned, have any interest in this proposal or in the Contract, to be entered into, if we are awarded the Contract; and that this proposal is made without any connection with any other company/ person, firm or party like-wise submitting a proposal and that this proposal is in all respects for and in good faith without collusion or fraud.

Thanking You

Yours faithfully,

Place:

Attachment 3

Deviations

[Repairing & Painting Works of Quarters and Transit Camp at 220 kV New Melli GIS Substation]

Specification No.ER2/NT/W-CIVIL/DOM/E00/26/13040 /1000076209 /I-5964/Rfx-5005013523 dt 30.09.2026)

Bidder's Name:

Bidder's Address:

Powergrid Corporation of India Limited [CF-17, Action Area-1C, New Town, Rajarhat, Kolkata-700156 TEL No.: 033-23242847]

Dear Sir,

Irrespective of whatever has been stated to the contrary anywhere else in our offer, only following are the deviations and variations from and exception to the specifications and bidding documents for the above men­tioned package. These deviations and variations are exhaustive. Except for these deviations, the Contract shall be executed as per your specifications and other bidding documents. Further, we agree that additional conditions, if any, found in our offer other than those stated below, save that pertaining to any rebates offered shall not be given effect to.

Place:

Attachment 4

Information regarding Ex-employees of POWERGRID in our Organization

[Repairing & Painting Works of Quarters and Transit Camp at 220 kV New Melli GIS Substation]

Specification No.ER2/NT/W-CIVIL/DOM/E00/26/13040 /1000076209 /I-5964/Rfx-5005013523 dt 30.09.2026)

Bidder's Name:

Bidder's Address:

Powergrid Corporation of India Limited [CF-17, Action Area-1C, New Town, Rajarhat, Kolkata-700156 TEL No.: 033-23242847]

Dear Sir,

We declare that we are aware of and have gone through the “Code of Business Conduct and Ethics for Senior Management Personnel” and “Code of Business Conduct and Ethics for Board Members” of POWERGRID (hereinafter referred to as the “Code of Conduct”). We further understand that as per the Code of Conduct, Senior Management Personnel including Board Members, who have retired/resigned from POWERGRID, shall not accept any appointment or post, as detailed in the referred Code of Conduct, within 1 year from the date of cessation of service/directorship unless approved by the Competent Authority.

Accordingly, we hereby furnish the details of ex-employees of POWERGRID who had retired/ resigned at the level of Chief General Manager and above from POWERGRID and subsequently have been employed by us:

In case of non-submission of No Objection Certificate/approval of the Competent Authority, as required, we understand that POWERGRID shall deal with such cases as per its Policy and procedures in vogue, which may also result in rejection of our bid. We also confirm that POWERGRID shall be the sole judge in this regard.

We further declare that any misrepresentation or submission of false/forged documents/ information in this regard shall be dealt with as per the provisions of the Integrity Pact and/or the Bidding Documents and/or POWERGRID’s policy and procedures.

Place:

Attachment 5

Declaration regarding Social Accountability

[Repairing & Painting Works of Quarters and Transit Camp at 220 kV New Melli GIS Substation]

Specification No.ER2/NT/W-CIVIL/DOM/E00/26/13040 /1000076209 /I-5964/Rfx-5005013523 dt 30.09.2026)

Bidder's Name:

Bidder's Address:

Powergrid Corporation of India Limited [CF-17, Action Area-1C, New Town, Rajarhat, Kolkata-700156 TEL No.: 033-23242847]

Dear Sir,

We conform that we stand committed to comply to all requirements of Social Accountability Standards i.e., SA8000 (latest Standard available at www.sa-intl.org ) and maintain the necessary records.

Place:

Attachment 6

Declaration

[Repairing & Painting Works of Quarters and Transit Camp at 220 kV New Melli GIS Substation]

Specification No.ER2/NT/W-CIVIL/DOM/E00/26/13040 /1000076209 /I-5964/Rfx-5005013523 dt 30.09.2026)

Bidder's Name:

Bidder's Address:

Powergrid Corporation of India Limited [CF-17, Action Area-1C, New Town, Rajarhat, Kolkata-700156 TEL No.: 033-23242847]

Dear Sir,

We confirm that Bid Form and Price Schedules have been filled up by us as per the provisions of the Instruction to Bidders. Further, we have noted that the same shall be evaluated as per the provisions of the Bidding Documents.

Further, we hereby confirm that except as mentioned in the Attachment – 3 (Deviations) hereof forming part of our bid :

(i) there are no discrepancies/inconsistencies and deviations/omissions/ reservations to the Bidding Documents, in the Price bid; (ii) the description of items and the unit thereof in the price schedules are in conformity with those indicated in the price schedule of the Bidding Documents without any deviation to the specified scope of work. We also confirm that in case any discrepancies/ inconsistencies and deviations/ omissions/ reservations, as referred to in para (i) and (ii) above, is observed in the Price Bid, the same shall be deemed as withdrawn/rectified without any financial implication, whatsoever to POWERGRID. However, in case of any arithmetical errors, the same shall be governed as per the provision of ITB Sub-Clause 19.2 read in conjunction with BDS.

Place:

Attachment 7

Certification by the Bidder per order no. F.No.6/18/2019-PPD dated 23/07/2020 and F.No 7/10/2021-PPD (1) (Order Public Procurement No 4) dated 23.02.2023 issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order)

[Repairing & Painting Works of Quarters and Transit Camp at 220 kV New Melli GIS Substation]

Specification No.ER2/NT/W-CIVIL/DOM/E00/26/13040 /1000076209 /I-5964/Rfx-5005013523 dt 30.09.2026)

Bidder's Name:

Bidder's Address:

Powergrid Corporation of India Limited [CF-17, Action Area-1C, New Town, Rajarhat, Kolkata-700156 TEL No.: 033-23242847]

Dear Sir,

We have read and understood the provisions of Order no. F.No 7/10/2021-PPD (1) (Order Public Procurement No 4) dated 23.02.2023 and subsequent amendments, if any, issued by Public Procurement Division, Department of Expenditure, Ministry of Finance, Government of India (DoE Order).

Particularly, we, the Bidder, have read the clause regarding restrictions on procurement from a ‘Bidder of a country which shares a land border with India’ and on sub-contracting to contractors from such countries.

We certify that we, the bidder is not from such a country or, if from such a country, has been registered with the Competent Authority and will not subcontract any work to a subcontractor/sub vendor from such countries unless such subcontractor/sub vendor fulfils all requirement in this regard and is eligible to be considered. [Where applicable, evidence of valid registration by the Competent Authority shall be attached.]

We further declare that any misrepresentation or submission of false/forged document/information in this regard shall be dealt with as per the provisions of Integrity Pact and/or Bidding Documents and/or POWERGRID’s policy and procedures.

Place:

Attachment 8

Information for E-payment, PF details, declaration regarding Micro/Small & Medium Enterprises and other information

[Repairing & Painting Works of Quarters and Transit Camp at 220 kV New Melli GIS Substation]

Specification No.ER2/NT/W-CIVIL/DOM/E00/26/13040 /1000076209 /I-5964/Rfx-5005013523 dt 30.09.2026)

Bidder's Name:

Bidder's Address:

Powergrid Corporation of India Limited [CF-17, Action Area-1C, New Town, Rajarhat, Kolkata-700156 TEL No.: 033-23242847]

Dear Sir,

We are furnishing the following details which include the Statutory Registration Numbers and details of Bank account for electronic payment.

Name of the Supplier/Contractor in whose favour payment is to be made

Address with PIN

Status of the Firm

Documentary Evidence to be Attached

Permanent Account Number (PAN)

GSTIN Numbers

Name of State

Name of State

PF Registration Number

Bank Details (Scanned copy of cheque to be uploaded)

Remarks: The definition of MSEs owned by SC/ST is as given under: (a) In case of proprietary MSE, proprietor(s) shall be SC/ST. (b) In case of partnership MSE, the SC/ST partners shall be holding at least 51% shares in the unit. (c) In case of Private Limited Companies, at least 51% share shall be held by SC/ST promoters. Documentary evidence: Please provide scanned copy(ies) of the SC/ST certificate(s) issued by District Authority as applicable for SC/ST MSE category as per (a), (b) or (c) above.

Place:

Attachment 9

Declaration by the bidder for ‘Code of Integrity for Public procurement’

[Repairing & Painting Works of Quarters and Transit Camp at 220 kV New Melli GIS Substation]

Specification No.ER2/NT/W-CIVIL/DOM/E00/26/13040 /1000076209 /I-5964/Rfx-5005013523 dt 30.09.2026)

Bidder's Name:

Bidder's Address:

Powergrid Corporation of India Limited [CF-17, Action Area-1C, New Town, Rajarhat, Kolkata-700156 TEL No.: 033-23242847]

Dear Sir,

1.0 We have read the provisions of the bidding documents regarding abiding by the ‘Code of Integrity for Public Procurement’. Accordingly, we hereby declare that we shall abide by the ‘Code of Integrity for Public Procurement’ as mentioned under ITB Clause 29 of the Bidding Documents. The details of any previous transgressions of the code of integrity with any entity in any country during the last three years or of being debarred by any other Procuring Entity are as under:

We also accept that in case of violation/transgression of this code by us in competing for or in executing the Contract, Employer has the right to take punitive measures as per the provisions of the Bidding Documents and/or POWERGRID’s policy and procedure.

Place:

Name of Package

Specification Number

Address of concerned POWERGRID OFFICE

Bid Form

Bank Guarantee

DD/Pay Order

Paid through POPU

2.1 Type of Enterprise

Small

Medium

Bid Validity (days)

Information

Status of Firm

Partnership Firm

Private Limited Company

Public Limited Company

Current Account