CONSTRUCTION OF ADDITIONAL TOILET BLOCK FOR BARRACK HOUSING PARAD AND PROVSION OF TOILET BLOCK FOR JCOs OR UNDER GE CENTRAL KHADKI

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation,etc.or for shaft,wells, cesspits, manholes, pierholes,etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in any type of soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed

M&L for plain cement concrete M-7.5 grade (Nominal Mix) using 40mm graded stone aggregate as in foundation, filling & mass concrete complete all as specified and directed.

M&L for RCC M-15 grade (Nominal Mix) using 20mm graded stone aggregate as in lintel n.exc 1.5m, hold fasts, bed blocks etc complete all as specified and directed.

M & L for RCC M-25 grade (Design Mix) using 20mm graded stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, coping beam, band etc; basement slabs, under-reamed piles and mass

M & L for RCC M-25 grade (Design Mix) using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for RCC M-25 grade (Design Mix) using 20mm graded stone aggregate as in Chajjas and the like complete all as specified and directed.

M & L for RCC M-25 grade (Design Mix) using 20mm graded stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span and the like complete all as specified and directed.

M & L for RCC M-25 grade (Design Mix) using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6 (using 20mm graded stone aggregate) , exc 10cm in width and setting in cement & sand mortar 1:6 complete all as specified and directed.

M & L for steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.

M & L for steel formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and as directed.

M & L for steel formwork to chullah hoods, chajjas, troughs and similar items including edges n exc 200mm thick for rough finished flat surfaces of concrete complete all as specified and as directed.

M & L for steel formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and as directed.

M & L for steel formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete complete all as specified and as directed.

S & F 30mm thick FACTORY MADE MOULDED DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 25mm x 25mm for stiles, top and bottom rails. M.S. frame shall have a coat of steel primers. The inner panel shall consist of 25m thick EPS of Density 23 Kg / Cum bonded with 2mm thick termite proof, water proof and fire resistant moulded PVC sheet manufactured by an ISO-9001-2015 certified company, with 2,4,6 raised panel design in different plain and / or prelam colours after routing the Moulded design on one side & 2mm plain and / or prelam PVC sheet on other side of EPS. The edge of panel to be sealed with lipping of 15mm wide PVC sheet baton (made by sticking 2mm rigid foam PVC sheets of 5mm (+0.25) thickness using PVC solvent cement) and stile sides 25mm (5mm x 5Nos) thick and 30mm width PVC sheet fitted along M.S tube for hardware provision & for lock 25mm thick (5mm x 5Nos). PVC sheet of size 150mm x 200mm fixed with inner side of EPS Panel etc complete all as sper specification & drawing and as directed by Engineer-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified.

S&F for stainless steel butt hinges, medium weight, cold rolled mild steel 100mm long complete all as specified.

S&F aluminium anodised barrel tower bolts of extruded section and fixed 150mm long complete all as specified and directed.

S&F 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F aluminium handles 150 mm, fabricated type, anodised, fixed with screws, complete all as specified.

S&F for aluminium anodised louvered ventilators of section 80mmx20mmx1.50mm including 5mm thick frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. making good the jambs and painting with existing surface matching complete all as specified and directed by Engr-in-Charge. Note : Glazing and 0.56 mm dia SS wire mesh with average width of aperture 1.18 mm shall be deemed to be included in unit rate quoted.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking. bending spirally for hooping for columns, posts, beams, foundation etc. hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for TMT bars 6mm dia to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

M & L for TMT bars 5mm dia and over upto and incl 10mm dia as in stirrups, spacers and binders, complete all as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as per IS 15965: 2012 in roof covering fixed with self tapping screws complete all as specified & directed by Engineer-in-Charge.

S & F hot rolled medium and high tensile structural steel of Fe-410W grade E 250 quality A conforming to IS 2062: 2011 as in rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and as directed.

S & F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161 -1979 grade 240 complete all as specified and as directed.

M & L for moorum filling in floors or pavings, laid in layers n exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed.

M&L for hardcore of gauge n.exc 63mm mm of broken stone / boulders, deposited , spread and levelled in layers n. exc 15 cm thick , watered and rolled /rammed to a true surface complete all as specified and directed.

M & L for 25 mm thick PCC M-15 grade (Nominal Mix) using 20mm crushed stone aggregate as in floor to receive tile/levelling course complete all as specified and directed.

M & L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles and laid over and including 15mm thick cement screed bed or bedding layer in CM 1:4 complete all as specified.

M & L for glazed ceramic tiles in vertical surface 350x 250x7 mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with colour of tiles and laid over and including 10mm thick backing coat in CM 1:4 complete all as specified.

M&L for 10 mm thick rendering on fair faces brick / concrete surfaces in CM 1:6 finishing even and smooth without using extra cement complete all as specified and as directed.

M&L 15 mm thick rendering in CM 1:4 on external surfaces of walls & top surfaces of chajja mixed with water proofing compound @ 3 % by the weight of cement surface finished even and fair without using extra cement. NOTE :-i) For chajja, proper chamfering should be done ii)WPC shall be measured and paid separatelyunder relvant item of this BOQ

M&L for 5mm thick rendering on concrete surface of ceiling / soffits of chajjas in CM 1:3 and rendering is to be finished even and smooth without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint (any tint) over a coat of alkali resistant primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash on wall complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

M&L for 75mm thick PCC M-10 grade (Nominal Mix) using 40mm graded crushed stone aggregate as in plinth protection finishing even and smooth without using extra cement.

Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. Note:GI tubing shall be made concealed

Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed. Note:GI tubing shall be made concealed

S & F rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) triple layer 'ISI' marked, of capacity 500 litre hoisting and fixed in position on roofs including fittings complete all as specified and directed.

S&F 15mm bore Bib taps, cast copper alloy with crutch , screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S & F Swan Neck pillar taps chromium plated cast copper alloy with screwed down high pressure with or without lettered Hot Or Cold for iron pipes 15mm dia all as specified and directed. MAKE :- Cera cat part no F1003105 or equivalent make given under list of makes

S&F 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or utterfly handle,screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F for gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe 15mm bore complete all as specified and directed.

S&F for float valves, high pressure, with ploythene float and flynut complete, screwed for iron pipe or brass ferrule 15 mm bore complete all as specified and directed.

S&F for 32mm bore waste fitting brass CP or glazed ware WHB complete all as specified and directed.

S&F for PVC conncetion 15mm size with PTMT nuts of length 450mm long complete all as specified and directed.

S&F for urinal spreader brass CP, for fixing 15mm bore pipe complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches, floor or fixed on wall complete all as specifiedand directed.

S&F 75 mm bore PVC (SWR) pipes type 'A' single socketed, in any length with rubber ring joints, laid in trenches, floor or fixed on wall complete all as specifiedand directed.

S&F for PVC (SWR) floor trap with grating, 75mm bore outlet incl joint to waste pipe fixed in concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate) complete all as specified and directed.

S&F for salt glazed stone ware gully trap square or round mouthed,type 'P' size 150x150mm complete all as specified and directed.

S & F wash down water closet (pedestal pattern) with seat cover and flushing cistern complete set with acessories with P or S trap including connection to drain (or outgoing pipe ) and flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S&F for vitreous china bowl urinal flat back size, 465x355x265mm white including and providing and fixing plugs,bedding urinal against wall in cement mortar (1:2),securing urinals to plugs with and including 60 mm long brass screws,pointing around urinal back in cement fixing automatic flushing cistern with brackets,flushing pipe, grating and union for discharge pipe (excluding of fixing supply pipe to flushing cistern,trap and waste pipe) complete all as directed.

S & F viterious china wash basin white flat back size 550mm x 400mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings complete all as specified and directed.

S&F in repair PVC low level flushing cistern 10 ltrs capacity with float ball valve and bracket including fixing of flush pipe & 15mm dia PVC connector pipe 450mm long with two nos fly nuts complete all as specified and directed.

S&F for vitreous china urinal partition white of size 310x770mm complete all as specified and directed.

Removing excavated material exc. 250 m but n exc. 500 m and depositing where complete all as specified and directed.

M&L for hardcore of gauge exc 63mm but n.exc 100 mm of broken stone / boulders, deposited , spread and levelled in layers n. exc 15 cm thick , watered and rolled /rammed to a true surface.

M&L for 25mm thick sand filling for laying paver blocks including consolidation complete all as specified and directed.

M&L for Machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments complete all as specified.

M&L for PCC M-15 grade (Nominal Mix) using 20mm graded crushed stone aggregate) as in copings, benching including form work complete all as specified and directed.

M&L for 200mm dia RCC drain pipes class NP2 with collars laid in trenches and jointed with in cement mortar omplete all as specified and directed.

M&L for cement concrete M-10 grade (Nominal Mix) using 40 mm graded coarse stone aggregate as in concrete bed to drain pipes including packing under & haunching against sides of pipes after they are laid and tested for 200 mm bore pipe complete all as specified and as directed.

M&L concealed Point wiring complete with 1.5 sqmm single core PVC insulated but unsheathed copper conductor FRLS 1100 Volts grade cable, drawn through and including PVC concealed conduit heavy duty grade ISI marked 20 mm dia (external), including conduit accessories like bends, tees, junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed copper conductor FRLS cable as earth continuity wire including metal flush modular switch box with frame and cover plate for modular switches, sockets etc all as specified and directed by Engineer in Charge for the following. NOTE :- Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate .

One light/fan point controlled by one switch.

One 3 pin 5 Amps socket on independent board

One 3 pin 5 Amps socket controlled with one way switche on same board complete.

S&F modular switch 1 way 6 Amps all as specified and as directed.

S&F modular socket 6A/16A 2-3 pin combined 2 module all as specified and as directed.

S&F lamp Holder insulated body with back plate complete all as specified and as directed.

S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) complete all as specified and directed.

S&F ceiling rose surface Bakelite three terminal all as specified and as directed.

S&F MCB, Single Pole, 6 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’B” curve all as specified and directed.

S&F MCB, TPN 16 to 32 amps, 415 Volts, 10 KA breaking cap, ‘’B” curve all as specified and directed.

S&F MCB distribution board, Double door, metal enclosure, SPN, 230 Volts, 8 way all as specified and directed.

S&F LED Tube light fitting, 1 x 20 Watt , integrated LED batten With aluminium housing , 230 Volts, 4 feet long , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable all as specified and directed.

S&F LED batten 2 feet long, 10 watt, 230 Volts , complete with all accssories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable all as specified and directed.

S&F in replacement LED building security light 25 watt, 230V complete with all accessories and including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, One GI medium grade 25/32 mm dia bracket of total length 60 cm and fixed to wall with 2 Nos MS Clamp and fastener complete all as specified and directed. MAKE :- Philips Cat No. BRP029 LED 25 CW SLR GR PSU SPD or equivalent make given under list of makes.

S& F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 v, 50 Hz 1200 RPM copper winding of sweep 250 mm complete all as specified and directed.

M & L for Earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 3 mtr long buried directly and vertically in ground with top edge at ground level after making bore hole of size not less than 300 mm dia and 3.0 Mtr long using suitable mechanical drilling rig (for drilling near the specified location), connected with galvanised steel earthing lead of 04 mm all as shown in Plate No-2, connected to the earthing test point, concrete pit in PCC M-10 grade (Nominal Mix) 40mm graded stone agregate with pit cover, funnel, wiremesh, 32 mm dia light grade GI tubing for protection of GI lead 04mm, charcoal and salt in alternate 150mm thick layers around GI earth pipe, including excavation, returning filling in & removal all as specified or indicated in SSR Part-I, including testing to achieve earth resistance value as per IS specification on completion.

Material and labour for fixing or passing through pipe, laid in trenches or fixed to pole/wall or fixed to LT panel board, XLPE insulated, armoured, heavy duty electric cable with aluminium stranded conductor, 1100 volts grade, heavy duty cable served with inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq.mm 4 core complete all as specified and as directed.

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground cable of size 40 mm outer dia with all fittings such as clamps. coupler etc laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Alcorr/ Rex/Gemini or equivalent as approved by GE

M&L for cable route indicator duly embossed ' MES LT CABLE" 1100 volts 80mm dia CI Plate marked on LT Cable bolted with 40x5mm flat iron of height 0.4mtr embedded in PCC M-10 grade (Nominal Mix) of size 200x200x300mm block complete all as specified and directed.

M&L for Laying in trenches / fixed to wall 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

M&L for Laying in trenches / fixed to wall 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

S&F gun metal gate valve with iron wheel head, screwed both ends for iron pipes 25mm bore complete all as specified and directed.

M&L for Cutting existing GI/CI/ pipes in position for insertion of fittings, mechanical joints etc for bore of pipe 50/80mm omplete all as specified and as directed.

M&L for PCC PCC M-15 grade (Nominal Mix) 20mm graded stone agregate as in foundation for filling in, mass concrete for repairs to road cutting, drain, path etc complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth for laying of cables, wate pipe line etc and getting out in soft / loose soil, complete all as specified and directed by Engr-in-Charge

M/S KISHAN CONSTRUCTION (BID ID -3108756)

S P DEVELOPERS (BID ID -3108186)

Suraj Sukhdev More (BID ID -3122356)