CERTAIN SANCTIONED WORKS AT REASI UNDER AGE REASI OF GE NAGROTA

Demolition of brick work or stone/ boulder Masonry, built in cement mortar including all quoins, pillars etc. complete all as specified and directed

M&L Brick work with sub class 'B' bricks, straight or curved on plan in CM 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M & L for Rendering 15 mm thick on other than fair faces of walls of brick work or concrete surfaces in cement mortar 1:6 compound finished even and smooth without using extra cement complete all as specified and as directed.

M & L for Rendering 15 mm thick on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound finished even and smooth without using extra cement complete all as specified and as directed. Note: water proofing compound shall be measured & paid seprately.

M & L for Rendering 10mm thick cement plaster on ceiling surfaces in cement mortar (1:3) incl preparation of new plastered ceiling surfaces and applying two coat of white wash complete all as specified and directed

M&L for 10 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces with WPC finished even and smooth without using extra cement over 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded aggregate) complete all as specified and directed. (WPC shall be measured and paid separately)

Supply only liquid water proofing compound complete all as specified and directed.(Make:Dr. Fixit,Pidilite).

Material & Labour Preparation of newly plastered wall surfaces, prepatory to distempering and applying two coats of distemper oil emulsion over one coat of birla white putty 1mm thick complete all as specified and directed.

Material & Labour for priming new surface of wall applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Material & Labour Preparation of old plastered wall surfaces and applying two coats of distemper oil emulsion over one coat of birla white putty 1mm thick preparatory to distempering complete all as specified and directed.

Material & Labour for priming old surface of wall applying two coats of cement base paint over one coat of primer complete all as specified and directed.

Taking down Chowkats or frames exceeding n. exc1.5 Sqm each (Without taking off shutters from the frame) complete all as specified and directed

Taking down Chowkats or frames exceeding1.5 Sqm but not exceeding 4.00 Sqm each (Without taking off shutters from the frame)complete all as specified and directed

S & F Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs,hinges, lock strike plate, hinges etc complete, size of frame 125x60mm including tarring ends and back of chowkats and lugs including back filling of PCC 1:3:6 for chowkats & PCC 1:2:4 for block for hold fast including two coats of synthetic enamel paint over a coat of red oxide primer on exposed surfaces complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed

S & F 35mm thick, 2nd class hard wood glazed and skelton shutter, open rebated and prepare to receive glass, gauzed etc(without sash bars) edges of framming plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR PART I Section 8 clause 8.24(a) supplied and fitted to chowkhat complete all as specified and directed.

S & F Steel windows/ventilator with tubular frame factory made with double shutter (wire gauged shutter & glass/glazed shutter, (wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl box type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, two coats of synthetic enamel paint over one coat of red oxide primer including taking down old windows/ventilators all as specified & as shown on drg .CEUZ/TD/1269/2008 SHT 1/1 to 1/3.

S&F steel ventilators fixed type with glazing bars complete all as specified and directed.

Supply and Fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as perspecification & drawing complete all as specified and directed.

Supply and Fix Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing including all fittings complete all as specified and directed.

Supply & Fix 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed. .

Supply & Fix 3 mm thick sheet glass pin headed quality and glazing with oil putty or fixed with bead/glazing pins in squares any size in each pane complete all as specified and directed.

Supply & Fix Floor door stopper of aluminium alloy body and tongue,anodised, with hard drawn steel spring, fixed in floor Door Stopper 140 mm complete all as specified and directed

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply & Fix Aluminium anodised handle extruded section of size 150mm complete all as specified and directed.

Supply & Fix Aluminium anodised handle extruded section of size 125mm complete all as specified and directed.

Supply & Fix 100 mm butt hinges, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

Supply & Fix Aluminium alloy, anodised, sliding door bolt of length 300 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of sections or cast-aluminium extruded alloy and fixed complete all as specified and directed.

Supply & Fix Aluminium anodised barrel tower bolts extruded section of size 200 mm, complete all as specified and directed.

Supply & Fix Aluminium anodised barrel tower bolts extruded section of size150 mm, all as complete all as specified and directed.

Supply & Fix 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed

Material & Labour preparation of new wooden surfaces over10 cm width or girth and applying two coats of synthetic enamel painting over a coat of pink primer complete all as specified and directed.

M&L painting two coats over a coat of red oxide primer to new steel surface of description incl preparation of surfaces over 10 CM width or girth, not other wise described.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

M&L Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

S&F Roof trusses (framed) trussed, purlin, crane gantries, plate, rail and fastening and heavy brackets framing (Beams, Tee, angle, channel or flat section) incl. distance pieces, cleat etc. confirming to Fe-410-W (Gde-E-250) quality B all as specified and directed.

Preparation of old or previously treated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

S & F virified coloured ceramic double charged ultracharged tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including Screed bed or bedding layer in 1:4 cement of mortar 15 mm thick over 25 mm thick cement concrete type type B-0, 1:2:4 (12.5mm graded aggregate) as in sub base complete all as specified and directed

S & F virified coloured ceramic double charged ultracharged tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting, dados etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including over 10mm thick plaster in CM 1:4 complete all as specified and directed

Material and Labour for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes over 25 mm thick PCC :2:4 type B0 complete all as specified and directed.

Material & Labour Machine cut kota stone slab flooring 20-25 mm thick over cement screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over Screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes over 25 mm thick PCC 1:2:4 type B0 complete all as specified and directed.

Material & Labour Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dado and pillar over cement screed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over plaster of mortar 15 mm thick in CM 1:4 complete all as specified and directed.

Material & Labour Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including incl 10mm thick plaster in cm 1:4 complete all as specified and directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed.

M&L, 75mm thick PCC (1:3:6) type C2, using 40mm graded stone aggregate as in plinth protection laid in panel alternate bays not exc 2.00 sqm with 6mm wide joints and joints filled with mastic fillings, finished even and fair complete .

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness and type, including cover fillets complete as directed by the Eng in charge

Supply & Fix Anodised aluminium snap grid frame work for false ceiling all as specified. (Size of grid 605 X 605 mm) complete all as specified and directed.

Supply & Fix 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws.) fixed in ciiling surface complete all as specified and directed (Make Everest or equivalent as specified in CA).

Supply & Fix fancy type stainless steel Drapery rods 19/20 mm bore for curtain rails with fixing stainless steel brackets, fency stainless steel stops and curtain rings (06 Nos per mtr) complete all as specified and directed .

S&F in repairs Bib tap 15mm bore fancy type chromium plated ,cast copper alloy with capstan head screwed down for iron pipes all as specified and as directed. Make Essco Marvel, series, Jaquar or equivalent

S&F in repairs15 mm bore dia fancy type Pillar taps, castcopper alloy, withcapstan heads,chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.(Make Jaguar/Johnson/Parry ware or equivalent in specified makes as approved)

S & F in repairs 75 mm bore PVC (SWR) floor trap with grating incl jointing with solvent cement complete all as specified and directed.

Supply & Fix PVC connections 15mm size 600 mm long complete all as specified and directed.

Supply & Fixed in repairs CP Brass shower rose 125mm of size with or with out swivel joints any size including fixing to steel pipe or union complete all as specified and directed.

Supply & Fixed 15 mm CP angle cock chrome finish cast copper alloy, with wall flange complete all as specified and directed.(Make CERA/Jaquar or equivalent in specified makes as approved)

S&F in repairs Stop valves, cast copper alloy, screwed down, high pressure, with capstan head, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore, fixed in repairs complete all as specified and directed.(Make Jaguar/Johnson/Parry ware or equivalent in specified makes as approved).

S&F in repairs PVC body valve less syphonic action type flushing cistern white low level with inlet ball valve float and handle including brackets 10 lits capacity with 32mm dia PVC bend pipe for low level cistern complete all as specified and directed.. (Make : Parryware Slimline standard or equivalent in specified makes as approved)

S & F in repairs vitreous china pedestal pattern type white wash down water closet pan with Antimicrobial Solid Seat Cover but excluding flushing cistern and flush pipe complete all as specified and directed. (Make Parryware or equivalent in specified makes as approved)

S&F Brass CP Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F Health faucet (Hand shower) with 1metre flexible tube with wall hook, Chromium Plated (Make Jaguar/Johnson/Parry ware or equivalent in specified makes as approved) all as specified and as directed by the Engineer-in-Charge.

S&F Soap dish,vitreous China white, approximate size 160x 160x90mm, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repairs CP Toilet paper holder fixed complete all as specified and directed of Make : Parryware or eqivalent. .

Supply & Fixed in repairs vitreous china squatting pan, Orrisa pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe of (Make Parryware or equivalent in specified makes as approved) complete all as specified and directed.

Dismantling water tanks and removing to store capacity exceeding 500 ltrs and not exceding 1000 ltrs complete all as specified and directed.

S&F 1000 ltr capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store complete all as specified and directed.

S& F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

Supply & Fix 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.

M&L for Granite slab (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete in window cill, cooking platform and over 15mm thick rendering in CM (1:4) complete all as specified and as directed.

S&F in repairs Vitreous China Ware Wash hand basin white, angle back oval shape, 550x400mm size, 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm dia stainless steel waste coupling of including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F in repairs Vitreous China Ware Wash hand basin white, flat back, 550x400mm size with long padestal, 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed 32mm dia stainless steel waste coupling of including cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

S&F Vitreous China Urinal, white with waste pipe Make Parryware NEW MAGNUM including CP Spreader and other accessories and Bracket with fixing arrangement complete all as specified and directed.

Supply & Fixed brass float valves high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule and fixed to iron pipe of bore 20mm complete all as specified and directed.

S&F in repairs 20mm Gun-metal, globe or gate valves,with iron wheelhead,screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs 15mm Gun-metal, globe or gate valves,with iron wheelhead,screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed on walls complete all as specified and directed.

Supply & Fixed PVC (SWR) bends with access door of 75 mm dia radius complete all as specified and directed.

Supply & Fixed PVC (SWR) bends 110 mm dia radius complete all as specified and directed.

S & F PVC (SWR) junction single(single T) equal or unequal bore of pipe 75 mm bore with acess door complete all as specified and directed

S & F PVC (SWR) junction single(single T) equal or unequal bore of pipe 110 mm bore with acess door complete all as specified and directed

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid, in trenches or in floors complete all as specified and directed.

M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 100mm bore pipe complete all as specified and directed.

S & F PVC (SWR) junction single (Single T) equal or unequal with acess door, 110 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 75 mm dia complete all as specified and directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and directed.

M&L Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L Cement concrete 1:4:8 type D-2 using 40mm graded agg and 100mm thick as in sub base of floors complete all as specified and directed.

M&L coloured rubberised Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment complete all as specified and directed.

Supply only Fine aggregate (sand) for laying floor finishes complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in copings, Kerbs including necessary formwork etc complete all as specified and directed.

M&L PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) 40mm thick as in concrete floor finishing the surface even and smooth without using extra cement complete all as specified and directed.

Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified and directed.

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth for fdn etc or for shaft well,cesspits,manholes, pierholes etc n. exc.10 sqm on plan and n. exc 1.5m in depth and getting out in any type of soil complete all as specified and directed.

M&L concrete bed to drain pipe incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) for 150mm bore pipe complete all as specified and directed.

M&L SGSW pipe 150mm dia bore type ‘A’ laid in trenches on concrete bed and jointed complete all as specified and directed.

M&L Cement concrete 1:4:8 type D-2 ( using 40mm grade crushed stone aggregate) as in fdn filling and mass concrete complete all as specified and directed..

M&L for Precast cement concrete slab for Manhole cover of type B-1, 1:2:4 (using 20 mm graded crushed agg.) set in CM 1:6 complete all as specified and directed.

M&L for TMT bar 10mm dia and over cut to length bent to shape reqd including cranking, bending spirally for hooking for column with MS wire 0.9 mm dia or securing with clips complete all as specified and directed..

M & L for Septic tank, exc. In ordinary soil foundation in PCC 1:2:4, brick work in cement mortar 1:4, RCC slab covers incl RCC pre-cast manhole cover having 6mm plate all around, reinforced cover with angle iron frame, vent shaft and sludge chamber etc. complete for 25 user as per CE/TD-1202 Sh ½ and 2/2 complete all as specified and directed.

M & L for Soakage wells exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber screen chamber Brick work in CM, RCC cover slab in M-25/ RR masonry / Filling with brick bats, complete of size 1.8 M dia X 3.0M deep complete all as specified and directed.

Returning filling in incl spreading, leveling watering and well ramming in layers n. exc 25 cm thick complete all as specified and directed.

Removing excavated/demolished material (soil) n.exc 50m and spreading where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed.

M&L for Concealed Point wiring using FRLS PVC insulated sheathed multi strand copper conductor cable 1100 volt garde 1.5 Sqmm FRLS PVC insulated sheathed multi strand copper conductor earth wire drawn in and including PVC conduit ISI marked not less than 20 mm dia concealed in wall & surface on ceiling with all conduit fittings etc incl testing and making good to disturbed surface to match existing surface for One light/fan point /bell point for modular accerries complete all as specified & directed. (Note :- cost of modular boxes, Suitable modular switch base, frame & cover is included in quoted rate.)

All as per Srl item N0 115 above but for one socket out let 5 Amp controlled by one switch on same board with other switch complete all as spd & directed

All as per Srl item N0 115 above for one socket out let 5 Amp controlled by one switch on independent board with other switch complete all as spd & directed.

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm (Phase - Red, Neutral - Black) and earth continuity conductor 2.5 sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all conduit fittings / fixing accessories and unwelded sunken galvanized pressed steel terminal box of thickness not less than 1.2 mm covered with 3 mm thick phenolic laminated white sheet cover for one 16 amp socket outlet controlled by one switch on independent board complete all as specified and directed.

Supply and fix 10 watt LED Bulb complete all as specified and directed.

Supply and fix lamp holder insulated body with back plate suitable for battern fittings complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F switch piano flush button single pole one way 6 amp complete all as specified and directed.

S&F socket outlet 2 in 1, 2 & 3 pin, 6 amp, flush type complete all as specified and directed.

S&F Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal complete all as specified and directed.

S&F ceiling rose 6 amp, 3 plates polycarbonate body complete all as specified and directed.

S&F, stepped type electronic fan regulator, Delux model, 100 watt, 240V, flush type complete all as specified and directed.

M&L for sub main wiring complete with 2 runs of 4 Sqmm PVC FRLS insulated heavy duty and unsheathed cable with multistranded copper conductor and drawing through in and including PVC conduit of suitable size and connecting terminal ends to meters and DB's including provision of 1 run of 4 Sqmm insulated copper cable for earth continuity conductor and connecting to earth dolly and taking down old u/s one complete all as specified and directed.

S&F Galvanised iron tubing 40 mm dia, light grade, laid at road crossing etc complete all as specified and directed.

S&F in replacement of Change over switch off load type with enclosure, conforming IS 13947 part I & III 415V, 4 pole of rating 63 amps, including taking out unservicable one complete all as specified and directed.

M&L Earthing complete with GI earth plate electrode 600x600x6mm buried directly in ground vertically to a depth of not less than 2.25mtr below ground level than 1.5mtr below ground level connected to GI earth wire 4mm dia by means of bolts washers etc made out of GI earth wire will be protected by galvanized iron pipe light grade 15mm bore up to main distribution board/main switch including necessary excavation and earth work PCC 1:3:6 type CI (using 20mm graded stone aggregate) RCC cover 1:2:4 type B1 including necessary reinforcement etc complete all as show electric plate No.3 of MES Such Part-I.

Supply and fixing LED lights fitting 1x 20 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

S&F 200 Amp, 415 volts, 3 Phase Industrial Busbar Chamber Box, Heavy duty Metal Construction, Copper Plates, white, 230/415 V Switchgear, 4 Pole, powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess/ wall mounted type and spaces as required including taking out unservicable one complete all as specified and directed.

S&F MCB distribution board SPN, 240 volts, 12 ways double door powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required including taking out unservicable one complete all as specified and directed.

S&F MCB distribution board SPN, 240 volts, 08 ways double door powder coated, CRCA steel sheet constructed as per IS : 8623, degree of protection IP 43 - IK 09 with metal door, recess mounted, having insulated 200 amp tinned copper bus bar, neutral busbar, earth bar, din bar, detachable gland plate, interconnection, earthing connection, blanking plates in unused spaces as required including taking out unservicable one complete all as specified and directed.

S&F MCBs as per load requirement 'C' series of breaking capacity 10 KA, ISI marked including required wiring connections with copper lugs of suitable size provided in MCB DBs and including taking out unservicable with following ratings complete all as specified and directed.

Single pole 6 to 40 amp.

Single pole and nuetral 10 to 40 amp.

Excavation in trenches in any type of soil not exc. 1.5 m wide and not exc. 1.5 in depth for laying of cabel or pipes (where provided for protection of cable) etc. and getting out trimming the sides, forming bottom surfaces to require level complete all as specified and directed

Returning filling in including spreading levelling watering and well ramming in layers not exc. 25 cm thick each complete all as specified and directed

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed.

M & L for sand cushioning with a layer of sand 80 mm thick before laying of cable and 150 mm thick after laying of cable in trenches complete all as specified and directed.

M & L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class 'B' (old size) bricks laid dry flat, complete all as specified and directed.

Design,Supply, installation, testing and commissioning of bus bar chamber box of outdoor type factory fabricated made out of CRCA sheet of 3.15 mm thick ,fully enclosed and angle iron frame of size 40 x 40 x 6 mm thick and T section with front and rear openable double door shutter, dust and vermin proof and rear opening complete with locking arrangement, having a system of bus bars of aluminium of suitable size of 100 Amps duly insulated and mounted on Epoxy/porcelain insulators in totally enclosed chamber with three phase and neutral 415 volts, AC, system. provn of suitable cable glands, duly powder coated all as specified & directed.

M&L for earthing complete with galvanized steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level surrounded on all sides by 150 mm thick charcoal & common salt starting from ground below earth plate upto 150mm above GI plate in alternate layers connected to galvanized earth strip 25x6 mm by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit all as shown in electrical plate No 5 of MES SSR Part-I (2009) as specified including provision of 40mm dia medium grade GI pipe for earth strip protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point /LT Panel as specified and testing on completion for desired result complete all as specified and directed by Engr-in-charge.

Supply, laying, jointing and testing and commissioning aluminium conductor, XLPE insulated,PVC inner sheathed, GI strip or wire armoured and overall PVC sheathed ,heavy duty 1100 volts grade in trenches/on surface of wall/ in GI pipe including dressing and clamping the cable with MS Zinc Passivated clamps and fixing suitable thimbles/lugs including cable glands of suitable size etc of cross-sectional area 50 Sqmm 3.5 core complete all as specified and directed .

Supply, laying, jointing and testing and commissioning aluminium conductor, XLPE insulated,PVC inner sheathed, GI strip or wire armoured and overall PVC sheathed ,heavy duty 1100 volts grade in trenches/on surface of wall/ in GI pipe including dressing and clamping the cable with MS Zinc Passivated clamps and fixing suitable thimbles/lugs including cable glands of suitable size etc of cross-sectional area 25 Sqmm 2 core complete all as specified and directed .

Supply, laying, jointing and testing and commissioning aluminium conductor, XLPE insulated,PVC inner sheathed, GI strip or wire armoured and overall PVC sheathed ,heavy duty 1100 volts grade in trenches/on surface of wall/ in GI pipe including dressing and clamping the cable with MS Zinc Passivated clamps and fixing suitable thimbles/lugs including cable glands of suitable size etc of cross-sectional area 16 Sqmm 2 core complete all as specified and directed .

Supply, laying, jointing and testing and commissioning aluminium conductor, XLPE insulated,PVC inner sheathed, GI strip or wire armoured and overall PVC sheathed ,heavy duty 1100 volts grade in trenches/on surface of wall/ in GI pipe including dressing and clamping the cable with MS Zinc Passivated clamps and fixing suitable thimbles/lugs including cable glands of suitable size etc of cross-sectional area 10 Sqmm 2 core complete all as specified and directed .

S&F Gun metal, globe or gate valves , with iron wheel head, 20 mm bore as per requirement of the site complete all as specified and directed.

S&F Gun metal, globe or gate valves , with iron wheel head, 25 mm bore as per requirement of the site complete all as specified and directed.

S&F Tubes, 'medium grade',20 mm galvanised, with all fitting; laid in trenches complete all as specified and directed.

S&F Tubes, 'medium grade',25 mm galvanised, with all fitting; laid in trenches complete all as specified and directed.