Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical R O SUJANPUR TEHSIL DISTT HAMRIPUR | Accepted-Technical Accept |
| 2 | Accepted-Technical HIMACHAL PRADESH HP | HAMIRPUR | HIMACHAL PRADESH | 174304 | Accepted-Technical Accept |
| 3 | Accepted-Technical GOVT ELECTRICAL CONTRACTOR C VILLAGE HAT PO BAJAURA TEHSIL BHUNTAR DISTRICT KULLU HP 175125 | KULLU | HIMACHAL PRADESH | 175125 | Accepted-Technical Accept |
Tender Value
₹8.2 L
EMD Value
₹16,442
Closing Date
19 Feb 2026, 11:00 amClosed
Executive Egnineer JS Division Sujanpur
Executive Egnineer JS Division Sujanpur
Sub Head Construction of underground RCC storage tank of 50000 Liters capacity at Ree)
2026_HPIPH_128088_1
EE-JSV-SJN-CB-E-tenders-2025
Open Tender
Civil Works
Item Rate
180 days
Executive Egnineer JS Division Sujanpur
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Executive Egnineer JS Division Sujanpur
₹16,442
26 Feb 2026
10 Feb 2026
19 Feb 2026
10 Feb 2026
19 Feb 2026
10 Feb 2026
Excavation in foundations,trenches etc., in earth work, lift upto 1.50 mts. Stacking the excavated soil not more than 3 mts. Clear from the edge of the excavation & then returning the stacked soil in 15 cms. Layers,when required into plinths sides of foundation etc.,consolidating each deposited layers by ramming & watering & then disposing of all surplus excavated earth as dierected within all leads & lifts as per entire satisfaction of Engineer in charge.
Providing & laying cement concrete 1:3:6 (1cement : 3 sand : 6 graded stone aggregate 40 mm nominal size) excluding the cost of centring & shuttering in Foundation & plinth.
Providing & laying design mix M-30 but not less than cement concrete 1 : 1.5 : 3 (1cement : 1.5 sand : 3 graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for reinforced concrete work in :-
Foundation,footing,bases of columns and the like & mass concrete.
Wall (any thickness but not less than 0.10 mts.Thickness)attached pillasters,buttresses plinth,& string courses etc.from top of found.level upto floor two level
Prov.form work with steel plates 3.15 mm thick welded with angle iron in frame 30x30x5mm,so as to give a fair finish i/c centring shuttering,strutting & propping etc. with wooden battens & ballies,ht. of propping & centring below supporting floor to ceiling not exceeding 4.00 mts. & removal of the same for in situ-reinforced concrete & plain concrete work :-
Vertical surfaces such as wall (any thick.) partitions & the like i/c attached pillasters,buttresses,plinth & string courses & the like.
Prov.form work of ordinary timber plankings so as to give a rough finish i/c centring, shuttering,strutting & propping etc. ht.of propping & centring below supporting floor to ceiling not exceeding 4 mts. & removal of the same for insitu-reinforced concrete & plain concrete work in :-
Arches beyond 6.00 mts.span
Prov.in RCC work smooth finishing of the exposed surface with cement mortor1:3(1cement :3 sand )
Providing & laying cement concrete work 1:2:4 (1cement : 2 sand :4 graded stone aggregate 20 mm nominal size) & curing complete excluding the cost of form work & reinforcement for reinforced concrete work in :-
Suspended floor,roofs,landing & shelves & their support balconies,beams,girders,bressumers & cantilever upto floor level.
Arches upto floor two level.
Providing Tor steel reinforcement for RCC work i/c bending,binding & placing complete upto floor two level within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work
Steel work welded in built up sections,trusses & framed work i/c cutting,hoisting & fixing in position & applying a priming coatof red paint :- In grating, framed ,guards,bars, ladders,railing,brackets & similar works.
Providing & laying in trenches GMS/MS Tubes (L/M class) tube fitting (Earth work in trenches to be measured & paid for separately) within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work
65 mm dia
80 mm dia
Providing & fixing CI Sluice valve (with hand wheel) as per IS : 780-1984 class-I upto 300 mm dia.(i/c brass spindle & as per 2906-1984 class-II for dia.> 300 mm) complete with bolts nuts,rubber insertion etc.,(the tail piece if required shall be measured & paid for separatly) within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work
65 mm dia
80 mm dia
Prov. & fixing SFRC Man hole cover with frame having frames size of 560 mm internal dia.should not be less than 100 kg within all leads and lifts complete to the entire satisfaction as directed by the Engineer-in-charge of the site of work
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.54 MB
F6.pdf
Tender Documents • 0.19 MB
F8.pdf
Tender Documents • 1.41 MB
Terms.pdf
Tender Documents • 0.05 MB
BOQ_189210.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .