MANNING AND OPERATION AND MAINTANCE AT 509 ABW ODF (MAP OFFICE QTR) KB LINE PUMP HOUSE OLD B P LINE NEW B P LINE ( MAP PH-II) ODF RO PLANT RO PLANT 509 ABW MP LINE PUMP HOUSE 801 TA BN RO PLANT AND MISC WORKS UNDER AGE EM OF GE (W) AGRA

Amount

Manning and operation of water supply installation including connected bore well with submersible pump set Pump House 509 ABW Pump House under GE (W) Agra such as pumps, electric control panel, internal and external electrification of water supply system, operation of valves of over head tank , above installation building by two shifts of 8 hours ( 0600 to 1400 hrs and 1400 hrs to 2200 hrs ) every day during staggered timings in morning, evening and night depending upon the availability of water from Yamuna Water/Borewell by pump operator cum technician per each shifts throughout the month including holidays and Sundays all as specified and directed.

Manning and operation water supply installation including connected bore well with submersible pump set Pump House ODF (MAP Officer Qtr) Pump House under GE (W) Agra such as pumps, electric control panel internal and external electrification of water supply system, operation of valves of over head tank, above installation building two shifts of 8 hours (0600 to 1400 hrs and 1400 hrs to 2200 hrs) every day during staggered timings in morning and evening and night depending upon the availability of water from Yamuna Water/Borewell by pump operator cum technician per each shifts throughout the month including holidays and Sundays all as specified and directed.

Manning and operation of water supply installation/ DG Set, located at K B Line Pump House under GE (W) Agra for its smooth functioning of water supply system for all days including Sunday/Holidays two shifts of 8 hours ( 0600 to 1400 hrs and 1400 hrs to 2200 hrs ) complete all as specified and directed .

Manning and operation water supply installation including connected bore well with submersible pump set Pump House Old B P Line and New B P Line ( MAP PH-II) under GE (W) Agra such as pumps, electric control panel internal and external electrificaton of water supply system, operation of valves of over head tank, above installation building two shifts of 8 hours ( 0600 to 1400 hrs and 1400 hrs to 2200 hrs ) every day during staggered timings in morining and evening and night depending upon the availability of water from Yamuna Water/Borewell by pump operator cum technician per each shifts through out the month including holidays and Sundays all as specified and directed.

Manning and operation water supply installation including connected bore well with submersible pump set Pump House Para Bn 5 Para Pump House under GE (W) Agra such as pumps, electric control panel internal and external electrificaton of water supply system, operation of valves of over head tank, above installation building two shifts of 8 hours (0600 to 1400 hrs and 1400 hrs to 2200 hrs) every day during staggered timings in morining and evening and night depending upon the availability of water from Yamuna Water/Borewell by pump operator cum technician per each shifts through out the month including holidays and Sundays all as specified and directed.

Operation and maintenance of water supply installation at MP line under GE (W) Agra for its smooth functioning of water supply system for all days including Sunday/Holidays Two shift of 8 hours ( 0600 to 1400 hrs and 1400 hrs to 2200 hrs ) complete all as specified and directed .

Note for Ser No 1 to 6 (i) Diesel shall be issued by the department under Sch “B” free for running of DG set. Collection /transportation of Fuel for DG Set shall be sole responsibility of the contractor and the rate for the same are deemed to be included in the quoted item rate. (ii) Operator should be ITI qualified or equivalent with 3 years experience of same work, i.e. water supply installations & DG Set etc. (iii) Maintenance of batteries such as filling of distilled water, replacement of battery terminals and other required materials for making functional of batteries. (iv) Operator will be responsible for testing of chlorination in water at pump house and required testing material & First Aid Box with all medicine for first aid would be provided by the contractor and also responsible for maintaining daily record of testing. (v) Contractor shall be responsible for cleaning of surrounding area of installations regularly. (vi) Contractor has to provide uniform to the operator which is to be included in the item rate (vii) Routine maintenance and detection of Chlorine Gas leakage, pump gland leakage, valve leakage, attending of minor electrical faults in panel/circuit and its rectification complete all as specified and directed shall be sole responsibility of the contractor and the rate for the same are deemed to be included in the quoted item rate (vii) operation of valves of over head tank & Pump set Raising Main and Distribution at different location as required and as directed by Engr-in Charge (ix) Daily record Maintain of running of Motor Pump Sets and DG Set specified in printed log sheet approved by Engineer-in-charge shall be sole responsibility of the contractor.

Manning & Operation of Reverse Osmosis plant of capacity 1000 LPH, RO Plant located at ODF RO Plant under GE (W) Agra in One shift of 8 hrs (0800 hrs to 1600 Hrs) as directed by Engineer-in-Charge including sunday and holidays, replacement of consumable items complete all as specified and directed

Operation and maintenance of RO plant at 801 TA Bn (Red Fort) of capacity 1000 LPH under GE (W) Agra for its smooth functioning for all days including Sunday/Holidays in One Shift of 8 hrs ( 0800 hrs to 1600 Hrs) replacement of consumable items complete all as specified and directed .

Manning & Operation of Reverse Osmosis plant of capacity 1000 LPH, RO Plant located at ODF RO Plant under GE (W) Agra in One shift of 8 hrs (0800 hrs to 1600 Hrs) as directed by Engineer-in-Charge excluding Sunday and Holiday, replacement of consumable items complete all as specified and directed

Note for Ser No 7 to 9 :- (i) Operator should be ITI qualified or equivalent with 3 years experience of same work. (ii) Cost of log sheet, register/stationary deemed to be included in the item rate. (iii) Contractor has to provide uniform to the operator which is to be included in the item rate. (iii) Contractor will be responsible for testing of PPM in water at RO plant and required testing material (iv) First Aid box with all medicine required for First Aid. (v) Contractor will be responsible for rectification of leakage in pipe line, valve leakage, attending of electrical faults in panel/ circuit cable and its rectification. (vi) Filtered watrer register and routine maintenance register approved by Engineer-in-charge.

M & L Dismantling of defective submersible pump set 2 HP with column assembly of any size/capacity including disconnecting electrical and water line connection complete and lifting it with the help of chain pulley, clamp, tripod etc. for repairing and re-fixing the same after making it serviceable including rethreading of column pipe/fixing of new column pipe and replacement of worn out nuts, bolts, washers etc complete all as specified and directed.

Repair/maintenance and servicing of RO plant, 1000 Ltrs capacity in undermentioned locations by replacement of unserviceable parts to make it serviceable including cleaning of membrane active, carbon filters sand, silex media properly if required with the help of changing chemical (recommeded by manufacturers) complete all as directed by Engineer-in-Charge.

S&F activated carbon for Reverse Osmosis (RO) plant capacity 1000 Ltrs complete all as specified and directed

S&F sand Media for Reverse Osmosis (RO) plant capacity 1000 Ltrs complete all as specified and directed

S&F silex Media for Reverse Osmosis (RO) plant capacity 1000 Ltrs complete all as specified and directed

M & L replacement of membrane, suitable for RO Plant of capacity 1000 LPH, low energy/brikish type BW 30-4040.

S&F cartridge 4" x 20" large filter 5 micron thread type. Make – Pentair/Genpure/Aqua/Kamflow

S&F2" x 20" Cartridge large filter 1 micron paper/spun type. Make – Pentair/Genpure/Filtermation

M&L in replacement of antiscalant chemcal/Solution for Reverse Osmosis (RO) plant capacity 1000 Ltrs complete all as specified and directed

M&L for dismantling high pressure motor of capacity up to 2HP & cutting the unserviceable winding wire, cleaning the starter and motor and rewinding the same with supper enameled copper winding wire of existing gauge and turn including varnishing, PVC sleeve, cotton tape insulation paper and all other material required for rewinding including lathe work of shaft and replacement of defective bearings two Nos (6203/6205 of make NBC/SKF) and refixing back in original position complete all as specified and directed.

M&L for dismantling of flushing pump of capacity 0.8 HP stainless steel body & cutting the unserviceable winding wire, cleaning the starter and motor and rewinding the same with supper enameled copper winding wire of existing gauge and turn including varnishing, PVC sleeve, cotton tape insulation paper and all other material required for rewinding including lathe work of shaft complete all as specified and directed.

M&L for dismantling of chemical dosing pomp suitable for 1000 LPH RO plant stainless steel body & cutting the unserviceable winding wire, cleaning the starter and motor and rewinding the same with supper enameled copper winding wire of existing gauge and turn including varnishing, PVC sleeve, cotton tape insulation paper and all other material required for rewinding including lathe work of shaft complete all as specified and directed.

Replacement of membrane housing made out of Stainless Steel for 1000 LPH RO plant suitable to hold of 2 membranes in series low energy type of size BW 30-4040 complete with end shield, nuts, bolts complete.

S&F in repairs gun metal half turn valve 25mm bore for iron pipe complete all as specified and directed

S&F in repairs gun metal half turn valve 20mm bore for iron pipe complete all as specified and directed.

M & L for servicing and testing of auto transformer starter of 120 HP electric motor by replacing copper connection lead, brass studs, connection plate of 6mm thick hylum sheet and, varnishing of transformer winding and repairing /replacing other minor parts which required to make the system serviceable complete all as specified and directed.

M & L for repair and servicing and testing of Pump set 10 /12.5 HP Centrifugal motor pump set/monoblock motor pump set 3 phase 415 volts by opening end covers, replacing connection lead, greasing the both end of bearings, and replacement of bearings and metaling/polishing of shaft, replacing worn out nut, bolts, gasket, air release valve key, gland stuffing box male/ female set, Rubber bush, descaling of impeller and replacing of impellor key & neck ring (Impellor guide) and other minor repair required and painting one coat with synthetic enamel paint with connected LT panel complete all as specified and directed

M & L for repair and servicing and testing of Pump set 100 /125 HP Centrifugal motor pump set/monoblock motor pump set 3 phase 415 volts by opening end covers, replacing connection lead, greasing the both end of bearings, and replacement of bearings and metaling/polishing of shaft , replacing worn out nut, bolts, gasket, air release valve key, gland stuffing box male/ female set, Rubber bush, descaling of impeller and replacing of impellor key & neck ring (Impellor guide) and other minor repair required and painting one coat with synthetic enamel paint with connected LT panel complete all as specified and directed .

Dismantling of defective submersible pump set 10 – 20 HP with column assembly of any size/capacity including disconnecting electrical and water line connection complete and lifting it with the help of chain pulley, clamp, tripod etc. for repairing and re-fixing the same after making it serviceable including rethreading of column pipe/fixing of new column pipe and replacement of worn out nuts, bolts, washers etc complete all as specified and directed.

Dismantling of defective submersible pump set 5-7.5 HP with column assembly of any size/capacity including disconnecting electrical and water line connection complete and lifting it with the help of chain pulley, clamp, tripod etc. for repairing and re-fixing the same after making it serviceable including rethreading of column pipe/fixing of new column pipe and replacement of worn out nuts, bolts, washers etc complete all as specified and directed.

S&F in repair MCCB, 4 pole, 415 volts, 50 Hz, 250 Amps, 25 KA adjustable type complete all as specified and directed. Make :L&T/Legrand/Havells

S&F in repair MCCB, 4 pole, 415 volts, 50 Hz, 400 Amps, 35 KA adjustable type complete all as specified and directed. Make : L&T/Legrand/Havells

S&F in repair over load relay including fixing arrangement suitable for 2/3 HP submersible pump complete all as specified and directed.

S&F in repair contactor including fixing arrangement suitable for 2/3HP submersible pump complete all as specified and directed.

S&F in repair capacitor including fixing arrangement suitable for 2 HP submersible pump complete all as specified and directed.

S & F in repairs submersible cable PVC insulated copper conductor 2.5 Sqmm 3 core 1100 V grade complete all as specified and directed.

S & F in repairs submersible cable PVC insulated copper conductor 4.0 Sqmm 3 core 1100 V grade complete all as specified and directed.

S & F in repairs submersible cable PVC insulated copper conductor 6.0 Sqmm 3 core 1100 V grade complete all as specified and directed.

Repairs to leakage of 300 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 250 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 200 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 150 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 100 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

Repairs to leakage of 80 mm dia bore pipe, fittings, such as tee, bends, tail pieces, connecting pieces etc including making run lead joints by using spun yarn and earth works complete all as specified and directed.

S & F in repairs cast iron sluice valve for the 150 mm bore both ends flanged, PN-1.0, with iron wheel (ISI marked) steel spindle,including nuts, bolts, washers and 3 mm thick rubber insertion sheet complete all as specified and directed.

S & F in repairs cast iron sluice valve for the 100 mm bore both ends flanged, PN-1.0, with iron wheel (ISI marked) steel spindle, including nuts, bolts, washers and 3 mm thick rubber insertion sheet complete all as specified and directed.

Labour for cutting and cleaning of grass, shrub, keeping at proper hygineing condition proper stagging around the installation building (Approx area 400 Sqm per installation) ((Old B P Line , New B P Line ( MAP PH-II) ODF RO Plant, Amar singh Camp, 801 TA RO Plant, 509 ABW, ODF MAP, KB Line Pump House, RO Plant 509 ABW, MP Line)) complete all as specified and directed.

Repairs cast iron foot valve for the 200 mm bore, including nuts, bolts, washers and 3 mm thick rubber insertion sheet complete all as specified and directed.

jay maa engineers

PD GUPTA AND COMPANY

Gupta Automobiles