ADDN/ALTN TO MTR S AND MT FSS BUILDING AND PROVN OF PARKING SHED AT CERTAIN PLACES AT AF STN CHANDINAGAR UNDER AOR OF GE (AF) FARIDABAD

Amount

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size exc 1.5 Sqm but not exc 4 sqm each and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed.

Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed.

Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc ccomplete all as specified and directed.

M&L for Brickwork with old size sub class `B' bricks straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Surface dressing n.exc 15 cm deep and getting out in loose / soft soil complete all as specified and directed.

Excavation in trenches not exc. 1.5m wide and not exc. 1.5m deep for foundation etc. not exc 10 Sqm on plan getting out as in hard / dense soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated material to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

M&L PCC 1:4:8 type D-2 (using 40mm graded crsuhed stone aggregate ) as in foundation, filling & mass concrete complete all as specified and directed.

M&L for RCC M25 design mix using (20mm graded crushed stone agg) for fdn, bases of col, plinth beam etc, complete all as specified and directed.

M&L for RCC M-25 design Mix using 20 mm gradded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for use & waste Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough surface of concrete, complete all as specified and directed.

M&L for use & waste Formwork to sides of pillars, posts, struts, piers, columns, and stanchions square/recatangular/polygun on plan for rough finished surfaces complete all as specified and directed.

M&L for TMT Bars 10 mm dia & over, cut to length bent to shape, reuired, including cranking bending and fixing to beam slab, chajja for faciliating guniting complete all as specified and directed.

All as per item No 14 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for Providing, cement concrete type B-1 (1:2:4) in lintels upto 1..5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directing complete all as specified and directed.

Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (w/o using extra cement) complete all as specified and directed.

M&L for 15 mm thick cement plastering on fair faces brick or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying two coats of exterior acrylic emulsion water based (weather proof coat) paint on wall complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with chalk whitening preparatory to distempering on surfaces of walls complete all as specified and directed.

M&L 5 mm thick plasteringin CM 1:3 over ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour preparation of newly plastered ceiling surfaces of any description and apply three coats of white wash complete all as specified and directed.

S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 125 mm, single or double rebated, comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.

S&F for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. Note: Hinges and necessary screws shall be paid separately.

S&F for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain wiremesh/skelton door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed. Note: Hinges and necessary screws shall be paid separately.

S&F butt hinges medium weight cold rolled mild steel 100mm size complete all as specified and directed.

S&F in aluminium anodised barrel tower bolts 200mm long of extruded section fixed complete all as specified and directed.

S/F Aluminium alloy, anodised, 250 mm size sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

M&L for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor overall length of cover 140 mm complete all as specified and directed.

Providing & fixing of vajra series windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for glass shutter should be of 52 x 25mm with concealed brackets. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter. Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 12mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes complete all as specified and directed.

S&F framed work such as grills, gratings etc. With ends for bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con-forming to Fe-290. Gde-E-165 complete all as specified and directed.

M&L for Steel work in tubular trusses and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

Material and labour for preparation of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M & L anodised aluminium snap grid frame work of size 605 x605mm for false ceiling including hanger 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5 mm dia 40mm long complete all as directed.

M&L for 8 mm thick Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid

Taking down of old existing roof treatment of any description incl scrube and remove loose concrete, brick tiles, mud fuska, plaster, bitumen, oil grases and any other materials that might effect adhesion by wire brushing the surface and cleaning of the surface throughly with water and disposed off old materials from site complete all as specified and directed.

M&L for 50 mm thick cement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone aggregate) as in padding/ base on roof complete all as specified and directed.

M&L for 20 mm thick plastering in CM 1:4 on RCC roof slab, finish even and smooth for receive water proofing APP membrane using WPC @ 3% by weight of cement complete all as specified and directed. Note : WPC will be measured and paid separately.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for preparation of the plastered roof surfaces and fix the APP polymeric water proofing membrane of minimum 3 mm thickness & weighing not less than 3.0 kg / sqm of make approved by GE, black finished reinforced with non-woven ployster 160 gsm matt with a thermofusible finish laid over primer conforming to IS:3384-1965 @ 0.5 kg/sqm and thereafter apply compitable hot blown bitumen 85/25 @ 1.20 kg/sqm torching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the end sealing complete all as specified and directed.

Dismantling water tanks and removing to store of capacity n exc 500 ltrs complete all as specified and directed.

Supply and fixing 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.

Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs and removal to contractor's store yard, complete all as specified and directed.

Supply and fixing 1000 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I

Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

Demolition of PCC cement concrete above ground floor and paving n.exc 15 cm thick (below or above ground level) un reinforced complete all as specified and as directed.

M&L for Hard core of gauge not exc 63mm deposited, spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface with broken/stone/boulers complete all as specified and directed.

M&L for Sand filling under floors including watering and consolidation complete all as specfied and directed by Engr-in-Charge.

M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 75mm thick complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C-2 using 20 mm graded stone aggregate as in plinth protection finished even & smooth w / o using extra cement complete all as specified and directed.

Material and labour for 100 mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in pavement finished even and fair laid & panels complete all as specified and directed.

M&L for 60 mm thick precast cement concrete coloured interlocking tiles of grade M-35 any shape and size confirming to IS 15658-2006 with grey cement and pigment in floors / pavements incl 30 mm thick sand cushioning complete all as specified and directed.

M&L for 1st or premium quaility Non-skid/acid restance tile, Ceramic colour tiles of size 400mmX400mmX7 to 8 mm thick in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed or bedding layer or mortar 15 mm thick for laying floor finished in CM 1:6 complete all as specified and directed.

M&L for 1st or premium quaility Glazed Ceramic colour tiles in vertical surfaces of size 450mmx350mmx7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match incl backing coat or bedding layer or mortar 10 mm thick for vertical surfaces in CM 1:4 complete all as specified and directed.

M&L for fully vitrified tiles 10mm thick Dark shade (Square/ rectangular) polished, area of each tiles n. exc 0.36 SQm in floors etc,, set and jointed in neat cement slurry and pointed in shite or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed.

Supplying and laying of CPVC pipes of bore 20 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in trenches including taking down of old GI tubes complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including connection to drain or out going pipe etc including making good the floor complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

Supply and fixing in repair vitreous China squatting pan, `Orissa' pattern, size 580 x440 mm white, with integral foot rests including provision of cement concrete bedding complete all as specified and directed.

S&F in repair for PVC valveless 10 ltrs capacity flushing cistern, low level, white, with inlet, ball walve, float and handle, flush pipe and brackets complete all as specified and directed.

S&F in repair for vitreous china wash basin oval of size 580mmx400mm, white, flat back, with brackets including 32 mm bore PVC discharge/waste and waste coupling for discharge pipe complete all as specified and directed.

S&F in repair for vitreous china urinals, bowl type including provding and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs, 60mm long brass screws, pointing around urinal back in cement, discharge/waste pipe, grating and waste coupling for discharge pipe complete.

S&F PVC connection 15 mm size with nuts of length 600 mm complete all as specified and directed.

S&F in repair for brass chromium plated shower rose of any size and fixed complete all as specified and directed.

S&F in repair for bib taps fancy type cromium plated alloy with crutch or butterfly, Handle, Screwed down, screwed for Iron pipe or for brass ferrule of 15 mm dia complete all as specified an directed.

S&F in repair for stop valves cast copper alloy screwed down high pressure with crutch on butterfly handle screwed both ends for union of 15 mm dia (concealed type) complete all as specified and directed.

S&F in repair for pillar taps fancy type cast copper alloy with capstain heads chromium plated screwed down high presser, with or without lettered’ hot or clod ‘ with long screwed shanks and fly – nuts, screwed for iron pipe of 15mm dia complete all as specified and directed.

S&F in repair for tubular towel 20mm dia D type 60 CM long between flanges, aluminium anodised complete all as specified and directed.

S&F in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair for ball valves 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe complete all as specified and directed.

M&L for PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

All as per item No 74 above but 110mm dia

All as per item No 74 above but 150mm dia

S&F PVC (SWR) bends of 75mm dia complete all as specified and directed.

All as per item No 77 above but 110mm dia

M&L for Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt weight n exc 4kg per sqm complete all as specified and directed.

Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm made out of 5mm one side prelaminated any colour PVC sheet reinforced with MS square tube complete all as specified and directed.

Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. M>S frame shall be covered with heat moulded prelaminated decorative any colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and prelaminated colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of both side prelaminated decorative colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site as per complete all as specified and directed.

M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris/ malba to low lying area out side of MOD land and applying 3 mm thick a layer of wall care water proof putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer/distemper and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.

M&L for preparation of old treated plastered surfaces of wall by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying two coats of exterior acrylic emulsion water based (weather proof coat) paint on wall complete all as specified and directed.

M&L for ATT and providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along external wall using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for ATT at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6-8mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same with chalk and white cement complete all as specified and directed.

Excavation in post holes each n.exc 0.5 Cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25Cm watering and removing surplus soil to a distance n.exc 50m and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (20 mm graded stone aggregate) for foundation etc including necessary form work complete all as specified and diredcted.

S&F for mild steel work as in roof trusses (framed) , trussed, purlins, crane gantries, rails and fastening and heavy brackets framing (Beam, tee, angle, channel of flat section) incl distance pieces, cleats etc conforming Fe 410-W (Gde E 250) quality A complete all as specified and directed.

Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc including making good the disturbed portion/surface complete all as specified and directed.

M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated and (FRLS) unsheathed size 1.5 sqmm with PVC concealed Conduit ( dia not less than 25 mm ISI marked) with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed.

All as per item No 92 above but for one 3/5 pin socket 5 Amp on same board, with 1.5sqmm wire with 1.5sqmm earth wire.

All as per item No 92 above but for one 3/5 pin socket 5 Amp on independent board with 2.5 sqmmwire with 2.5 sqmm earth wire .

All as per item No 92 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm.

S&F switch piano flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed.

S&F socket 3/ 5 pins, 6 Amp, flush type piano (multi purpose) 230 Volts, AC complete all as specified and directed.

S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts , AC complete all as specified and directed.

S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed.

S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals, 230 Volts , AC complete all as specified and directed.

S&F Batten holder PVC/Polycarbonate base / back suitable for LED lamp. 230 Volts , AC complete all as specified and directed.

S&F LED Bulbs 9/10W B-22 Pin type 230 Volts , AC complete all as specified and directed.

S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB complete all as specified and directed.

S&F stepped type electronic fan regulator flush type 230 Volts , AC complete all as specified and directed.

S&F LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed.

S&F LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings all as directed by Engineer-in-Charge.

S & F Wall Mounted Fan Heavy Duty (Steel/MS body) of size 400 mm sweep, 1300 RPM, 3 blade complete all as specified and directed.

S&F LED building secuity light 35 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods with accessories, 230 V, 1400 mm sweep 5 Star Rating. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M&L for submain wiring with 2X4.0 SQMM+1X4.0SQMM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit 25 mm dia medium grade ISI marked and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. Note : 03 run of wiring alongwith one run of PVC conduit shall be measured as 01 run.

M&L for submain wiring with 2X6.0 SQMM+1X6.0SQMM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit 25 mm dia medium grade ISI marked and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed. Note : 03 run of wiring alongwith one run of PVC conduit shall be measured as 01 run.

S & F of single pole and neutral sheet metal enclosures for Distribution board (DB's)suitable for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed.

S&F MCB SPN 40-63 Amps 240V incl all termnials, fitting etccomplete all as specified and directed by Engrr-in-charge.

S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc complete all as specified and directed.

S & F exhaust fans made of PVC plastic body complete with louver shutter of size 300 mm sweep, 1200 RPM, 230 Volt , AC,50 Hz complete all as specified and directed.

M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed.

Excavation in trenches in soft/loose soil not exceeding 1.5 Mtr wide and not exceeding 1.5 Mtr depth for laying of cables/poles or foundation etc and getting out all as specified and directed by Engineer-In-Charge.

Returning, filling, including spreading levelling and well ramming in layers not exceeding 25cm apart all as specified and directed .

Removing of surplus excavated soil to a distance not exceeding 50 Mtr from starting point and depositing where directed at a level not exceeding 1.5 Mtr above the starting point soft & loose soil complete all as specified and directed.

M&L for sand cushoning with a layer of sand 80mm thick before laying of cable and 150mm thick after laying of cable to trenches complete all as specified and directed. Note: Punned thickness shall be measured

M&L for sub class `B` bricks for cable protection complete all as specified and directed.

36SHRI RADHEY ASSOCIATES (BID ID -3484729)

UNIVERSAL ENTERPRISES (BID ID -3488461)

laxmi enterprises (BID ID -3482260)

H.B. Traders (BID ID -3485517)

NAVEEN KUMAR TYAGI (BID ID -3482890)