Rectification/strengthening of Yamuna River crossing pile location 67 of 400kV Quad D/C Dadri-Ballabgarh line under Ballabgarh TLM

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 50 mm average thickness

Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10-15 mm down size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved SuperPlasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument). Grade M 25 with cement content not less than 330 kg per cum

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Cleaning of exposed concrete surface of sticking material including loose, foreign material, dust, oil. etc. thoroughly by wire brush, sand blasting with coarse sand & water jetting/power washing followed by and including cleaning with oil free air blast and allowing surface to dry complete as per direction of Engineer in charge.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Finishing with Epoxy Anticorrosive paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Excavation whereever required for pile cap /tie etc. (other than boring) for all depth and size, in all types of soils including disposal of excavated materials for all lifts and leads,decent etc.as directed by Engineer - In -charge,together with all labour,tools & tackles,sheeting, sheet piling, dewatering etc. complete as required for proper execution of the job.

Supply and Providing M.S. liner of 6mm. thick in piles upto 10m. Depth (maxm.) from bottom of pile cap, limited to the approved drawing, including supply, straightening, bending, welding, all supports, labours, tools and tackles, plants & equipments, with primer and painting, etc. (complete) as required for successful completion of the job.

Back Filling with available excavated earth for all leads & lifts in sides of foundations & other under ground facilities in horizontal layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering, etc.

Providing and applying Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in all over concrete/RCC surface, etc. complete as per directions of Engineer-inCharge.

Water to diverted by using gunny bags filled with river bed material or suitable dewatering pumps or other suitable shoring arrangement as per direction of EIC to ensure proper dry working condition for execution of the work + concreting below water level.

Providing and applying anti-corrosive treatment to the exposed steel bars as well as the (new bars, if required) after surface preparation using two component. zinch rich epoxy primer with zinc content>84% volume solids of 57(+/-)3% and a mixed density of 2.4(+/-) 0.1kg/litre such as Master Emaco P 130 of BASF/equivalent product of make like -fosroc/Sika/pidilite make to using brush in a continous coat covering the rear side of bar inclusive of manpower, material and equipment.

Item Description

Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge. 50 mm average thickness

Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10-15 mm down size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved SuperPlasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument). Grade M 25 with cement content not less than 330 kg per cum

Add for using extra cement in the items of design mix over and above the specified cement content therein.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level & above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Cleaning of exposed concrete surface of sticking material including loose, foreign material, dust, oil. etc. thoroughly by wire brush, sand blasting with coarse sand & water jetting/power washing followed by and including cleaning with oil free air blast and allowing surface to dry complete as per direction of Engineer in charge.

Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect. Epoxy bonding adhesive having coverage 2.20 sqm/kg of approved make

Finishing with Epoxy Anticorrosive paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete. On steel work

Providing and applying Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in all over concrete/RCC surface, etc. complete as per directions of Engineer-inCharge.

Excavation whereever required for pile cap /tie etc. (other than boring) for all depth and size, in all types of soils including disposal of excavated materials for all lifts and leads,decent etc.as directed by Engineer - In -charge,together with all labour,tools & tackles,sheeting, sheet piling, dewatering etc. complete as required for proper execution of the job.

Supply and Providing M.S. liner of 6mm. thick in piles upto 10m. Depth (maxm.) from bottom of pile cap, limited to the approved drawing, including supply, straightening, bending, welding, all supports, labours, tools and tackles, plants & equipments, with primer and painting, etc. (complete) as required for successful completion of the job.

Back Filling with available excavated earth for all leads & lifts in sides of foundations & other under ground facilities in horizontal layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering, etc.

Water to diverted by using gunny bags filled with river bed material or suitable dewatering pumps or other suitable shoring arrangement as per direction of EIC to ensure proper dry working condition for execution of the work + concreting below water level.

Providing and applying anti-corrosive treatment to the exposed steel bars as well as the (new bars, if required) after surface preparation using two component. zinch rich epoxy primer with zinc content>84% volume solids of 57(+/-)3% and a mixed density of 2.4(+/-) 0.1kg/litre such as Master Emaco P 130 of BASF/equivalent product of make like -fosroc/Sika/pidilite make to using brush in a continous coat covering the rear side of bar inclusive of manpower, material and equipment.

tonne

Months

Construction of Residential Complex: - :

2 or More

Sole Bidder

Sole Bidder

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region –I, Regional Headquarter

2 or more

Name of the Bidder

Annex-XXX

2 or more

Details of documentary evidence submitted in support of Qualification Data

Turnover (in Rs. Millions)

Details of documentary evidence submitted in support of Qualification Data

Turnover (in Rs. Millions)

Audited Balance Sheet and Income Statements enclosed

Printed Name :

"Saudamini", Plot No. 2, Sector 29

2 or more

Name of the Bidder

of Transformer

of Transformer

2 or more

Details of documentary evidence submitted in support of Qualification Data

Details of documentary evidence submitted in support of Qualification Data

Details of documentary evidence submitted in support of Qualification Data

Details of documentary evidence submitted in support of Qualification Data

Audited Balance Sheet and Income Statements enclosed

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Company incorporated & registered in [Name of countries]

[Name of Countries]

Printed Name :

[Name of Countries],

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Item Description

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Quantity proposed to be bought/sub-contracted

Quantity proposed to be supplied

Printed Name :

Quantity proposed to be bought/sub-contracted

Printed Name :

Details of the proposed sub-contractor/sub-vendor

Printed Name :

Power Grid Corporation of India Ltd.,

B9, Qutab Institutional Area, Katwaria Sarai

Quantity proposed to be bought/sub-contracted

Quantity proposed to be supplied

Printed Name :

Quantity proposed to be bought/sub-contracted

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Deviation

Printed Name :

Deviation

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

Power Grid Corporation of India Ltd.,

B9, Qutab Institutional Area, Katwaria Sarai

Rectification/strengthening of Yamuna River crossing pile location 67 of 400kV Quad D/C Dadri-Ballabgarh line under Ballabgarh TLM

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Date of Retirement/ resignation from POWERGRID

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Date of Retirement/ resignation from POWERGRID

Printed Name :

Date of Retirement/ resignation from POWERGRID

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Value of co-efficient

Wholesale Price Index Number for `Cutting, shaping and finishing of stone’(Group Item) (monthly) (Base: 2011-12=100), as published by Office of Economic Advisor, Ministry of Commerce & Industry(www.eaindustry.nic.in).

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Details of Contract and date

Details of Transgression of Integrity Pact by the bidder

Estimated completion date

Projection for next five years

Printed Name :

Power Grid Corporation of India Ltd.,

B9, Qutab Institutional Area, Katwaria Sarai

Description of item on which applicable

Printed Name :

Power Grid Corporation of India Ltd.,

B9, Qutab Institutional Area, Katwaria Sarai

Date of Retirement/ resignation from POWERGRID

Printed Name :

Date of Retirement/ resignation from POWERGRID

Printed Name :

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

having its Registered Office at

Power Grid Corporation of India Ltd.,

Northern Region-I, Reagional Headquarter

Printed Name :

eight

...[Enter the Amendment]…

Bank Draft

Pay Order

Bank Guarantee

Bank Guarantee

Applicable

Bid Security

Governing Law

Terms of Payment

Performance Security

Taxes and Duties

Liquidated Damages for Delay by Contractor

Defect Liability

Guarantee

Patent & Royalties

Limitation of Liability

Settlement of Disputes

Arbitration

Price Adjustment

Printed Name :