PROVISION OF SECURITY RELATED WORKS, STEEL GATE AND FENCING AT ALG PASIGHAT UNDER GE(AF) CHABUA

Amount

Supply only chain link fencing made out of 3.15mm dia galvanised iron wire of mesh 75x75mm size made upto mattress or cages, straining for fixing to Angle iron post and 10mm dia MS round bar as line wire welded to fencing post (MS bars and posts shall be measured and paid separately) complete all as specified and directed.

Fixing only chain link fencing of any dia type to angle iron post including provision of 10mm dia bars as line wire welded to fencing post (MS round bars shall be measured and paid separately) any mesh, size and type to any type of standards, rails, straining bolts, etc complete as specified and directed.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete as specified and directed. Note:- Each line wire shall be measured.

Excavating in post holes (or similar holes) in soft/loose soil each nexc 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete as specified & directed.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to FE-290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, the other end to be embedded in RCC fencing post while casting for fixing chain link fencing 11 to 15mm dia of length exceeding 100mm but not exceeding 150mm long complete all as specified and directed.

M&L for cement concrete type D2 (1:4:8) (40mm graded stone aggregate) in foundation filling and mass concrete/ for posts/structs etc complete all as specified and directed.

M&L for 10mm dia mild steel round bars (Fe-410-W Gde E-250 Quality A) fixed independently including hooking ends for fixing chain link fencing as in bearing bars complete all as specified & directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not other wise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not other wise described not exc 10cm width or girth and apply one coat of synthetic enamel paint over a coat of Red oxide primer complete all as specified and directed.

M&L for TMT bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for TMT bar 5mm dia and over upto & including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for rough excavation not exceeding 1.5 m deep and getting out in soft/loose soil complete all as specified and directed.

M&L for RCC type B1 (1:2:4) 20mm graded stone aggregate (Nominal mix) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for RCC type B1 (1:2:4) 20mm graded stone aggregate (Nominal mix) in columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L flat formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter with smooth surfaces complete all as specified and directed.

M&L for flat formwork to sides of pillars, posts, struts, piers, columns, and stanchions etc.; vertical or to better with smooth surfaces complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) with even and smooth surfaces (without using extra cement) in walls complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coat of cement base paint over a coat of alkali-resistant primer complete all as specified and directed.

M&L for MS Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe 290, Gde-E-165 complete all as specified and directed.

M/S S. P. ENTERPRISE

M/s Parma Construction

R K CHAKRABORTY AND CO

M/s PRABIR ENTERPRISE

Chief Builders &Consultants

S K ENTERPRISE

J D construction