REPLACEMENT OF CONVENTIONAL LIGHT FITTING TO LED FITTING AT VARIOUS BUILDINGS AT ICGS MANDAPAM AND PROVISION OF AMF PANEL TO 200 KVA DG SET AND LT PANEL TO CGRA POWER HOUSE AND SPECIAL REPAIR TO 25 KVA, 15 KVA DG SET AT ICGS MANDAPAM UNDER GE(I) CHE

Amount

Dismantling and taking down Old Flood light fitting/Tube light fitting/CFL/Surface mounted conventional light fitting of any type and size for replacement and taken as credit complete all as specified and as directed.

Taking down carefully copper/ Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit complete all as specified and as directed.

Supply and Fixing x LED 200 watts Flood light luminaire, Luminus flux 23500 lm, Luminarrie efficiency 120 lm/W, 5700K CCT and more than 70 CRI with secondary optics made in pressure die cast housing and heat sik in aluminium extrusion and IP66 and IK 08 Protection including surge protection upto 10 KV, Anti dust exposed lens in Highmast light brackets by providing suitable GI Bracket, bolts, screws nuts such fixing arrangemnts including 2.5 sq mm copper FRLS 2 core cable for connection between Junction box and light all as dircted by Engr-in-Charge Make : Philips Model: Tango G3 BVP 383 LED 235J 195W 23500

Supply and fix Weather Proof Cable Junction Box of size 205mm x 255 mmx1122 mm for street light with knock out for cable entry , IP 66 protection ,halogen free for out door installation complete with suitable terminals for connection of cable size 4 core 25 sqmm etc disconnection of existing cable connection /reconnection of cable etc. complete including provision of MS flat iron clamp of suitable size for fixing of Junction box complete all as specified and as directed.Make : Hensel Model no : KF 2525G .

Supply and fix 4 feet 1X28 watt LED Suspended Linear light fittings comprises Aluminium extrusion with PMMA sliding diffuser having 2 suspension , Box type with extructed aluminium heat sink provided for efficient heat dissipation and integrated electronic driver with 5700 K complete all as specified and directed. Make : Panasonic, Model : PLHM 10288

Supply and fix 4 feet 1X22 watt LED wall mounted LED Tube light fittings ,110 lm/Watt, 25,000 burning hours, Voltage protection range 140V-270V, 6500 K, Box type with extructed aluminium housing provided for efficient heat dissipation with high quality Poly carbonate diffuser and integrated electronic driver with lamp including connecting up with 1.5 sq mm twin core FRLS flexible copper conductor cable from ceiling rose to fitting etc complete all as specified and directed. Make : Phillips, Model : BN 021 LED25S 6500 PSU GR S1

Supply and fix Batten integrated LED Tube Light fitting 2 feet 1x10 W LED including Batten 115 lm/Watt, 25,000 burning hours, Voltage protection range 140V-270V, 6500 K, Box type with extructed aluminium housing provided for efficient heat dissipation with high quality Poly carbonate diffuser and integrated electronic driver complete with all accessories internally pre wired and including connecting up with 1.5 sq mm twin core FRLS flexible copper conductor cable from ceiling rose to fitting etc, complete all as specified and as directed. Make : Phillips, Model : BN 021 LED10S 6500 PSU GR S1

Supply and fix LED fitting 7 W pressure die cast housing, more than 105 lum/Watt, IP 65 water proof Protection and lK08 impact resistance, 25,000 burning hours, suitable for surface and wall mounting applications complete with all accessories internally pre-wired and including connecting up with 1.5 sq mm twin core FRLS flexible copper conductor cable from ceiling rose to fitting etc complete all as specified and as directed Make: Philips Cat No: WT140W LED7S NW PSU S1 PC

Supply and fix LED Bulk head fitting 9W pressure die cast housing with unbreakable poly carbonate diffuser IP 66 water proof Protection and lK09 impact resistance, 50,000 burning hours, suitable for surface and wall mounting applications complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size from ceiling rose to fitting etc complete all as specified and as directed Make : Philips Cat part No: WT202W LED 6S CWPSU S2 PC

Supply and Fix Recess mounted low depth LED 2 feet x 2 feet luminaire with white powder coated CRCA housing with LED 30 W (or nearest higher Wattage) & luminous efficacy more than 100 lm/W, 6500K, 25,000 burning hours and full window acrylic diffuser including connecting up with 1.5 sq mm twin core FRLS flexible copper conductor cable from ceiling rose to fitting etc, complete all as specified and as directed. Make : Make : PhilipsCat part No: RC140B P LED30S-6500 L60W60 PSU

Supply and Fix Recess mounted low depth LED 1 feet x 1 feet luminaire with white powder coated CRCA housing with LED 17 W (or nearest higher Wattage) & luminous efficacy more than 100 lm/W, 6500K, 25,000 burning hours and full window acrylic diffuser including connecting up with 1.5 sq mm twin core FRLS flexible copper conductor cable from ceiling rose to fitting etc, complete all as specified and as directed. Make : PhilipsCat part No: RC375B LED15S PSU W30L30 PCV IN

Material and labour for Point Wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and conduit accessories fixed concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly for one light point controlled by one switch. complete all as specified and as directed.Note: Make of PVC copper conductor cable:- Finolex/Poly cab/ Asian. Make of PVC conduit : Avon plast/ Kon seal / Garware

Supply Fabricate, install, connect, test and commission Outdoor type dust & Vermin proof LT electrical panel board, 1100 volts, 50 Hz AC supply, totally enclosed with double door front and back opening hinged doors with plain top projected Manufactured by CPRI Approved Manufacturer, fully compartmentalised for cable chamber and busbar chambers with adequate space made out of 3.15 mm thick CRCA Sheet for load bearing like all over body, front and back cover with hinges and aldrops with DC locks and one seven lever Navtal lock etc complete with 1 mm thick Glossy finish powder coated with 7 tank process having RAL-7062 standard all over the external surfaces and 2.0 mm thick MS Sheet for non load bearing and portions, complete with one coat of red oxide primer , two coats of powder coating including suitable angle iron/ flat iron frame work/ supports bottom 50x50x6 mm MS channel as base and chamber for metering equipment complete suitable for mounting following switch gear items internally connected with suitable capacity aluminium strip/ rods insulated and FRLS copper conductor complete mounted on PCC pillars foundation, cable connection using new lugs complete with danger notice all as specified and comprising of the followings::-Make : CPRI Approved LT Panel board Manufacturer. Note: (i) Existing cables which removed from old panel board will be fixed with new lugs during fixing in new panel board (ii) Getting of approval for Panel board drawing from Engr-in-Charge is necessary before fabrication. (iii) All switch gears should be fixed with 06 mm thick Fibre sheet (iv) Panel should be factory made & CPRI approved

a) LED/Neon indicator bulb in RYB Colour - 1 Set. b) 4 No Bus bar 400 amps with chamber c) Digital panel meter for all Energy with RS485 class 1 for taking currrent, voltage , Energy, PF reading -01 No Make: Schnider Model : EM7230 with RS485 class 1.0 d) 3 phase over current and Earth fault relay range (250-400 AMP) -01 No.Make:L&TCat No : 17K726QF4M -01 No, or Equivalent in Siemens/ABB/Schnider INCOMING :- e) Front Handle type Changeover Switch 400 Amps Capacity, 4 pole, 415 volt-01 No .Make: L&T, Cat No :CO44000OOOO or Equivalent in Siemens/ABB/Schneider f) MCCB 4 Pole, 415 V, Microprocessor release, 400 A with breaking capacity 36 KA-01 No,Make : L&T, Type : DN3-400D Cat No : CM93003OOOOX1 or Equivalent in Siemens/ABB/Schneider OUTGOING : g)MCCB 4 Pole, 415 V, Microprocessor release, 250 A with breaking capacity 36 KA-02 No,Make : L&T, Type : DN2-250D Cat No : CM92151OOOOX1- 01 Nos , or Equivalent in Siemens/ABB/Schneider h) MCCB 4 Pole, 415 V, Microprocessor release ,160 A with breaking capacity 36 KA-02 Nos, Make : L&T Type : DN2-250D, Cat No : CM921520000X1 or Equivalent in Siemens/ABB/Schnider i)MCCB 4 Pole, 415 V, Microprocessor release , 63 A with breaking capacity 36 KA-01 Nos, Make : L&T Type : DN2-250D, Cat No : CM921530000X1 or Equivalent in Siemens/ABB/Schnider

Supply Fabricate, install, connect, test and commission Outdoor type dust & Vermin proof AMF Panel board for 200 KVA DG Set along with 400A Automatic Transfer Switch (ATS) with manual bypass facility (4P) and automatic cut off/controls for Temperature, Oil pressure, Unbalance load in each phases etc and having meter for readings for Voltage, Current, load in KW in each Phase etc with arrangement of battery charger, indications and control fuse/MCB wired with copper control cable of suitable size using suitable cable tray and provision for connecting power cables with suitable gland cuttings and earth bar, made out of 3.15 mm thick CRCA for load bearing like all over body, front and back cover with hinges and aldrops with DC locks and one seven lever Navtal lock etc complete with 1 mm thick glossy finish powder coated with 7 tank process having RAL-7062 standard all over the external surfaces and 2.0 mm thick MS Sheet for non load bearing and portions, complete with one coat of red oxide primer , two coats of powder coating including suitable angle iron/ flat iron frame work/ supports bottom complete all as specified and as directed.

Supply, laying & testing LT UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 185 sq mm complete all as specified and as directed. (Note : Make of cable : Gloster/Polycab/CCI)

Supply, laying & testing LT UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 3.5 core 240 sq mm complete all as specified and as directed. (Note : Make of cable : Gloster/Polycab/CCI)

Excavation in trenches n.exc 1.5m wide and n.exc 1.5m depth and getting out in soft/ loose soil for laying UG cables, pipes etc complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm , soil obtained from excavation complete all as specified and as directed.

Removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed

Supply and spread clean M sand in trenches including levelling, punning for cushioning of cables complete all as specified and as directed. Note : Punned thickness of sand cushioning only shall be measured and paid.

Supply and lay Sub class B bricks in layers perpendicular to the axis of UG cable for protection of cable complete all as specified and as directed.

Material and labour for cutting the existing Bituminous road/cement concrete surface 150 mm thick to the required width and depth for laying pipe line for cable protection and making good the disturbed surface by filling with PCC 1:3:6 Type C1 using 20 mm graded stone aggregate to match with the existing surface complete all as specified and as directed.

Material and labour for GI Tubing 80 mm bore Medium grade with all fittings laid in crossing road/ complete all as specified and as directed. Ath or fixed in wall /pole up to junction box including necessary clamping etc complete all as specified and as directed.Note : Cutting of road item shall be measured and paid seperately. Make of GI Pipe : Tata/Jindal/Prakash Surya

Material and labour for Earthing complete with galvanised steel earth plate electrode, 60x60cmx 6.3mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level,connected to using galvanised iron strip 32x6mm as earting lead by means of bolts,nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 of MES SSR Part I including necessary excavation and earth work in any type of soil, salt, charcoad dust, PCC 1:2:4 type B1 in chamber, RCC 1:2:4 chamber cover with 6 mm dia MS bar at 100 mm centre to centre both ways and MS 6 mm dia hook completion complete and all as specifed and as directed . Notes:-The rates quoted is inclusive of galvanised earth lead strip 32 x 6 mm conductor upto a length of 7.5m from the earth pit (02 for 01 LT Panel and 01 for AMF Panel)

Material and labour for dismantling the fuel full part pump from the Engine of DG 15 KVA, transporting to the service center and complete servicing and overhauling of the pump including replacement of service kit ,element, delivery valve, plunger, copper washer etc all as required including re-calibration, refixing,timing set up and testing complete all as specified and as directed.

Supply,labour and testing of alternator stator full rewinding and full exiter field rewinding including transportation complete for the following DG sets :.

15 KVA DG Set

25 KVA DG Set

Supply and fix DG Set bearing and old item taken as creditcomplete for the following DG sets :.

15 KVA DG Set

25 KVA DG Set

Labour for Main rotor, Exciter rotor, Removing, Cleaning, Washing, Varnishing, heating charges, Refixing, Testing, Onload testing for the following DG sets :.

15 KVA DG Set

25 KVA DG Set

SIRITEL SYSTEMS PRIVATE LIMITED

LAKSHMI ELECTRICAL ENTERPRISES

SRI LAKSHMI GANESH ENGINEERING WORKS

SRI LAKSHMI ASSOCIATES