MAINT AND REPAIR TO EOT AND HOT CRANES OF 510 ABW UNDER AGE E/M-I OF GE (NORTH) MEERUT CANTT

Amount

Maintenance and repair/regular and periodical servicing of crane EOT/HOT hoist/winch including fault finding of cranes, cleaning/servicing , welding of parts, Breakdown Maintenance/load testing of the crane and replacement of mechanical spares/parts of electrically /hand operated overhead travelling (EOT / HOT / JIB ) cranes , double box, girder type with electric motor for long travel,cross travel, hoisted ,controle pannels,protective pannels ,gear box , gantry rail ,main switches ,resistance coil,wire rope ,rope drum ,brake controle, cable and switches etc for the following capacity of crane at 510 ABW. - Notes - 1.) Load Test Certificate will be provided by contractor duly signed by authoriesed OEM's of cranex/TIB Engg/Pull mac/ Pioneer after servicing/ testing of crane performance in all respect as specified and directed. 2.)T& P and essential safety gaurds are requied at the site and same managed by contractor. 3.)Spare parts required will be measured and paid seperately.

EOT crane 20Ton

EOT crane 10Ton

EOT crane 5 Ton

EOT crane 3Ton

EOT crane 2 Ton

EOT crane 1 Ton

Elect operated hoist crane 3.2 Ton

Elect operated hoist crane 1 Ton

Elect operated hoist crane ,0.5Ton

Elect operated hoist crane 0.25 Ton

Winch electrically operated 8 Ton tractive capacity

HOT crane 2 Ton

Hand operated under sling Chain pully block 1 Ton

JIB CRANE 2 Ton

JIB CRANE 1 Ton

S&F combination fuse switch double break in sheet steel enclosure conforms to IS/IEC 13947-3 rated voltage -415 volts AC 50 Hz type TPN of capacity 63 amps complete all as specified and directed

S&F combination fuse switch double break in sheet steel enclosure conforms to IS/IEC 13947-3 rated voltage -415 volts AC 50 Hz type TPN of capacity 100 amps complete all as specified and directed

S&F combination fuse switch double break in sheet steel enclosure conforms to IS/IEC 13947-3 rated voltage -415 volts AC 50 Hz type TPN of capacity 200 amps. complete all as specified and directed

Disconnection/ dismantaling of UNSV MCCB cover box from the site Supply & Fixing fabricated MS Box (300 mm x 400 mm) of suitable size to cover/accommodate existing MCCB 3/4 pole upto 400 Amp surface mounted MS box made out of 16 SWG MS sheet having 4 pole at Top and bottom side to entry core of the cable using cable entry for connection of incoming and out going cable cutting at front side of box to be free the Knob of the MCCB and providing front door with locking arrangenment including power coated paint over a coat of primer inclding fixing the MS box the wall / channel by grouting of bolt nuts and warsher 4 sets using ravel plug and necessary fixing accessories and making all incoming and outgoing connection of MCCB complete all as specified and directed ('C' frme FE,400A)

Supply and Replacement Moulded case circuit breaker 415 volts 4 pole ,50 C/S, AC having rupturing capacity 50 KA & normal current rating 400 Amp complete all as specified and directed

All as described Ser item No. 06 here-in-before but current rating 320 Amps,4 pole and 36 KA rupturing capacity.

All as described Ser item No. 06 here-in-before but current rating 250 Amps,4 pole and 36 KA rupturing capacity.

All as described Ser item No. 06 here-in-before but current rating 200 Amps, 4 pole 36 KA rupturing capacity.

All as described Ser item No. 06 here-in-before but current rating 63 Amps 25 KA rupturing capacity, 4 pole

Supply and Replacement Moulded case circuit breaker 415 volts 3 pole ,50 C/S, AC having rupturing capacity 35 KA & normal current rating 400 Amp complete all as specified and directed

All as described Ser item No. 11 here-in-before but current rating 250 Amps, 3 pole 36 KA rupturing capacity.

All as described Ser item No. 11 here-in-before but current rating 320 Amps, 3 pole 36 KA rupturing capacity.

All as described Ser item No. 11 here-in-before but current rating 200 Amps, 3 pole 36 KA rupturing capacity.

All as described Ser item No. 11 here-in-before but current rating 100 Amps 25 KA rupturing capacity, 3 pole

Supply and Replacement Single phase Preventer for motor protection of EOT cranes complete all as specified and directed

Supply and Replace LT under ground XLPE insulated armoured heavy duty and PVC sheathed aluminium stranded conductor cable 1100 V grade (for laid in the ducts, fixed on wall, roofs and trusses with clips including necessary accessories like copper lugs, cable entry glands, suitable size of bolts / nuts / washers etc) complete of size 50 Sqmm 3 1/2 Core complete all as specified and directed

All as described Ser item No. 17 here-in-before but 35 Sqmm 4 Core

All as described Ser item No. 17 here-in-before but 25 Sqmm 3 1/2 Core

All as described Ser item No. 17 here-in-before but 50 Sqmm 4 Core

Supply and Replacement of Phase LED indicator ( RYB) complete all as specified and directed

M & L for dismantling/taking down from any height for Rewinding hoist motor, Long Travel / Cross Travel motor any other motor fixed at any height with super enameled copper winding wire of Capacity 0.5 HP to 7.5 HP motor complete all as specified and directed

All as described Ser item No. 22 here-in-beforebut capacity 7.5 HP to 17.5 HP motor

Supply and Replacement Pendent box, 6 way of existing size (suitable to accomodate 6 Nos push buttons), box fabricated made out of 18 SWG MS sheet having one hole at top to connect the pendent cable using cable entry glands and two side hooks on the top of either side for holding the chain guard of pendent cable, fixing metal outer cover required push button (Red and green) duly prewired inside the pendent box having rear door opening and locking arrangement incl two coat of synthatic enamel paint of approved colour over a coat of primer complete all as specified and directed.

All as described Ser item No. 24 here-in-before but 8 way

All as described Ser item No. 24 here-in-before but12 way

Supply and Replacement Push button mushroom head / Hexagonal type (Red or Green colours ) complete all as specified and directed.

S & F off load change over switch 415 volts,50 Hz in sheet metal enclosures four pole of capacity 100 Amps,04 pole side handle operated complete all as specified and directed

S & F in repairs, connect, switch disconnector with kit kat fuse in metallic enclosure 415 V, TPN, 100 Amps complete all as specified and directed

S & F in repairs PVC wire insulated, unsheathed copper conductor single core, 4 sqmm 1100 Volts grade, multi stranded, FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 complete all as specified and directed

S & F in repairs PVC wire insulated, unsheathed copper conductor single core, 6 sqmm 1100 Volts grade, multi stranded, FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 complete all as specified and directed

S & F in repairs PVC wire insulated, unsheathed copper conductor single core, 10 sqmm 1100 Volts grade, multi stranded, FR- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 complete all as specified and directed

S & F in replacement of AC Contactor Freedom Series type 4 pole with 415 volts with coil 220 volts as per existing auxiliary contact block with 02 No + 2 NC and current rating 16 Amps complete all as specified and directed .

S & F in replacement of AC Contactor Freedom Series type 4 pole with 415 volts with coil 110 volts as per existing auxiliary contact block with 02 No + 2 NC and current rating 16 Amps complete all as specified and directed

S & F in replacement AC Contactor Freedom Series type 4 pole with 415 volts with coil 220 volts as per existing auxiliary contact block with 02 No + 2 NC and current rating 25 Amps complete all as specified and directed

S & F in replacement AC Contactor Freedom Series type 4 pole with 415 volts with coil 110 volts as per existing auxiliary contact block with 02 No + 2 NC and current rating 25 Amps complete all as specified and directed

S & F in replacement AC Contactor Freedom Series type 4 pole with 415volts with coil 110 volts as per existing auxiliary contact block with 02 No + 2 NC &current rating 40 Amps complete all as specified and directed

S & F in replacement AC Contactor Freedom Series type 3 pole with 415 volts with coil 110 volts as per existing auxiliary contact block with 02 No + 2 NC and current rating 40 Amps complete all as specified and directed

S & F in replacement AC Contactor Freedom Series type 4 pole with 415 volts with coil 110 volts as per existing auxiliary contact block with 02 No + 2 NC and current rating 70 Amps complete all as specified and directed

S & F in replacement AC Contactor Freedom Series type 4 pole with 415 volts with coil 110 volts as per existing auxiliary contact block with 02 No + 2 NC and current rating 140 Amps complete all as specified and directed

Supply and Replacement AC Solenoid Brake assembly, size 7" suitable for 10 to 20 Ton capacity EOT Cranes testing of crane on full load complete all as specified and directed.

Supply and Replacement Solenoid Brake assembly, size 4" suitable for 2 to 3 Ton capacity EOT Cranes testing of crane on full load complete all as specified and directed .

Supply and Replacemenet AC Solenoid Brake assembly, size 5" suitable for 3 to 5 Ton capacity EOT Cranes testing of crane on full load complete all as specified and directed

Supply and Replacement set of two brass gear ( as per existing gear/ sample ) duly casted / fabricated and cutting teeth as required suitable to accommodate in the cranes Gear Box complete and capacities / sizes of cranes 1 to 2 Ton complete all as specified and directed

All as described ser item No 44 here-in-before but 0.25 to 0.50 Ton capacity of crane

All as described ser item No 44 here-in-before but 3 to 5 Ton capacity of crane

All as described ser item No 44 here-in-before but10 Ton capacity of crane

All as described ser item No 44 here-in-before but 20 Ton capacity of crane

Supply and Replacement Bearing bracket of size up to 20 ton EOT crane as per existing gear box (or as per sample) complete all as specified and directed

Supply and Replacement Tapper Roll Bearing of No 30232/30226/30216/ 30205/30215/33207 or any other size as per existing gear box bearing complete all as specified and directed

Supply and replacement Aluminum lugs up to 20 ton EOT crane of size 35 sqmm a complete all as specified and directed

All as described ser item No 51 here-in-before but 50 Sqmm

All as described ser item No 51 here-in-before but 70 Sqmm

All as described ser item No 51 here-in-before but 95 Sqmm

S & F cable tray , 4inch non perforated type/perforated , solid bottom tray made of high quality corrosive resistance and fire resistive metal including all fixture assessories completed all as specified and directed.

Supply and replacement of tie for binding of wire cables 6" any size of cranes complete all as specified and directed

All as described ser item No 56 here-in-before but 8 "

All as described ser item No 56 here-in-before but 12 "

Supply and replacemenet of porcelin kit kat of size 16 Amps complete all as specified and directed

All as described ser item No 59 here-in-before but 32 Amps

All as described ser item No 59 here-in-before but 63 Amps

Supply and replacement of binding wire 8 SWG complete all as specified and directed

Supply and Replacement Gear oil (20W40) any other grade approved by manufacturer suitable for crane gear box complete all as specified and directed

Supply and Replacement Sealed container in 10Kg packing grease suitable for crane gear box complete all as specified and directed

Supply and Replacement Oil Seal (As per sample) suitable for crane gear box upto 20 ton crane complete all as specified and directed

Supply and Replacement Coupling and foundation nuts, bolts washer hot drawn steel size of bolts will be 75mm length, 16mm dia, or as per existing suitable size of nuts,bolts & washer ( as per sample) complete all as specified and directed

Supply and Replacement Male & female insulator made out of bakelite sheet 6mm thick round in shape 50mm dia duly drilled 20/22mm hole in center suitable for round bus collector unit / bus bar for EOT crane complete all as specified and directed.

Supply and Replacement Male & female insulator made out of bakelite sheet 6mm thick round in shape 30/32mm dia duly drilled 10 to 15mm hole in center suitable for round bus collector unit / bus bar for EOT crane complete all as specified and directed.

Supply and Replacement Male & female insulator made out of bakelite sheet 6mm thick round in shape 25/26mm dia duly drilled 10 to 15mm hole in center suitable for round bus collector unit / bus bar for EOT crane complete all as specified and directed.

Supply and Replacement Brake coil, epoxy coated 440 volts suitable for EOT crane capacity 20 Ton suitable for 7" breake assembly complete all as specified and directed

Supply and Replacement Brake coil, epoxy coated 440 volts suitable for EOT crane capacity 5 to 10 Ton suitable for 5" breake assembly complete all as specified and directed

Supply and Replacement New brake coil, epoxy coated 440 volts suitable for EOT crane capacity 2 to 3 Ton suitable for 4" breake assembly complete all as specified and directed

Supply and Replacement PVC cable copper conductor, multistandard 40/0.0076, 4 core with and including GI wire 6 SWG, sheet rings, binding wire for binding the cable and GI wire together on steel rings not less than at one mtr gap and stretching of GI wire and cable and binding at both ends of the crane complete all as specified and duirected.

Supply and Replacement single cable trolly of EOT crane capacity upto 20 Ton all as specified and required.

Supply and Replacement Cable PVC insulated and over all sheathed 1100 volts grade cable copper conductor twisted multi standard of size 1.5 Sqmm 10 core, complete all as specified and directed

Supply and Replacement of Cable PVC insulated and over all sheathed 1100 volts grade cable copper conductor twisted multi standard of size 4 Sqmm 4 core.complete all as specified and directed

Supply and Replacement of Cable PVC insulated and over all sheathed 1100 volts grade cable copper conductor twisted multi standard of size 4 Sqmm 12 core. complete all as specified and directed

Supply and Replacement of Cable PVC insulated and over all sheathed 1100 volts grade cable copper conductor twisted multi standard of size 2.5 Sqmm 12 core complete all as specified and directed

Supply and Replacement of Cable PVC insulated and over all sheathed 1100 volts grade cable copper conductor twisted multi standard of size1.5 Sqmm single core. complete all as specified and directed

Supply and Replacement of Cable PVC insulated and over all sheathed 1100 volts grade cable copper conductor twisted multi standard of size 4 Sqmm double core complete all as specified and directed

Supply and Replacement of Cable PVC insulated and over all sheathed 1100 volts grade cable copper conductor twisted multi standard of size 6 Sqmm double core complete all as specified and directed

Supply and Replacement of Cable PVC insulated and over all sheathed 1100 volts grade cable copper conductor twisted multi standard of size 10 Sqmm double core complete all as specified and directed

Supply and Replacement three phase DOL starter 440 volt suitable upto 7.5 HP motor with single phase preventer including making all electric connection complete all as specified and directed.

All as described Ser item No 83 here-in-before but 12 to 15 HP motor (but star delta starter)

All as described ser item No 83 here-in-before but 15 to 25 HP motor

M & L for Rewinding of cut coils of burnt winding wire of Magnetic break thrust motor 3 phase 2 to 5 HP of EOT crane complete all as specified and directed

M & L for Rewinding of cut coils of burnt winding wire of Magnetic break thrust motor 3 phase 10 to 20 HP of EOT crane complete all as specified and directed

Supply and Replacement Brake lining of existing size,for Magnetic break thrust motor 3 phase upto 20 ton EOT crane complete all as specified and directed

Supply and Replacement Transformers of capacity 100 to 150 VA of input 440 volts output 110 volts/ 24 volts for EOT crane 2 to 5 Ton capacity, complete all as specified and directed

All as described Ser item No 89 here-in-before but of capacity 300VA for EOT crane 10 Ton capacit

All as described Ser item No 89 here-in-before but of capacity 400VA for EOT crane 20 Ton capacity.

Supply and Replacement Oil Tight Limit Switch Snap Action Type LIP-65, suitable for EOT crane capacity upto 20 Ton, making all electric connection and testing the crane complete all as specified and directed.

Supply and Replacement Overload relay capacity 13.2 Amp to 19.4 Amp suitable for 10 to 20 Ton EOT crane complete all as specified and directed

All as described Ser item No 93 here-in-before but 2.4 Amp to 3.8 Amp suitable to 2 Ton EOT Crane

All as described Ser item No 93 here-in-before but 5.6 Amp to 9.2 Amp suitable to 3 to 5 Ton EOT Crane

Supply and Replacement single GI wire rope of suitable dia as per site requirement complete all as specified and directed.

Supply and Replacement Isolator 40 amps from crane panel , 240 volts, DP, complete all as specified and directed.

Supply and Replacement Isolator 63 amps from crane panel , 240 volts, DP, complete all as specified and directed.

Supply and Replacement MCB SP, AC, 240 volts of 06 to 32 Amps, C curve, 10 kA rupturing capacity complete all as specified and directed. .

Supply and Replacement MCB-TPN,63 Amps 240/415 volts C curve, 10 kA,. rupturing capacity . complete all as specified and directed.

Supply and Replacement Isolator 100 amps from crane panel , 415 volts, TPN, complete all as specified and directed.

Supply and Replacement Steel wire rope any dia in mm made out of high carbon steel of ungalvanised coating connecting to the Hoist drum, load hook of EOT crane upto capacity 20 Ton including all fixing accessories such as nuts, bolts and washers etc, testing of crane on full load complete all as specified and directed

Supply and Replacement Copper wire/strip of any dia/ size for bus bar/DSL system or any other requirement in the crane complete all as specified and directed.

Supply and replacement of complete gear box 1ton to5 ton of capacity of cran complete all as specified and directed

Supply and replacement of complete gear box 10 ton to 20 ton of capacity of cran complete all as specified and directed

Supply and Replacement pinion shaft from gear box and repair completed gear box with gear making and other connected accessories including within ,shaft approx 760 to 700 mm long of N-24 steel with middle pinion gear key slot and treated 50mm dia at both ends at pinion gear 30mm dia after pinion gear 34 mm at stop gap of bearing as per existing gear box shaft complete all as specified and directed

Supply and Replacement Bearing 6308-M7X SKF as per sample in Gear Box 20 Ton complete all as specified and directed.

Supply and Replacement Bearing 6016 SKF as per sample in Gear Box 20 Ton complete all as specified and directed.

Supply and Replacement Bearing 6206 SKF as per sample in Gear Box 20 Ton complete all as specified and directed.

Supply and Replacement Steel coupling 5" long (as per sample/size) outer dia approx 50mm inner dia / bore 44mm with tightening nut bolts complete all as specified and directed.

Disconnecting the electric supply, dismantling and opening of thrust brake drum of EOT cranes and OCB's taking out care fully old transformer oil and refilling of the fresh transformer oil and reassembling the thrust brake drum and OCB's in its position complete all as specified and directed.

M & L for load hook repair for cranes of capacity 1 to 20 Ton including wheels , bearings,shaft etc and Test Certificate will be provided by contractor duly signed by authoriesed OEM's after servicing/ testing of performance in all respect as specified and directed.

Supply and replacement of load hook of alloy steel as existing for cranes of capacity 1 to 20 Ton complete and Test Certificate will be provided by contractor duly signed by authoriesed OEM's after servicing/ testing of performance icomplete all as specified and directed.

M & L for load hook drum complete assembly repair for cranes of capacity 5to 10Ton including wheels , bearings,shaft etc complete with all connected accessories,all as specified and directed.

Supply and replacement of MS strip with insulator and copper strip channel suitable for moving of crane any size with accessories including reviting and welding work complete all as specified and directed.

Supply and replacement of Aluminum strip bus bar with insulator and copper strip channel suitable for moving of crane any size with accessories including reviting and welding work complete all as specified and directed.

Supply and replacement of new phase collector with guide line for track with accessories complete all as specified and directed.

Supply and replacement of new electronic drive 5,5KW -7 , 5 HP 380-500 V complete assessories as existing complete all as specified and directed.

Supply and replacement of variable frequency device (VFD) with set up of frequencies with rotary device properly such as 3-phase motors/ any other suitable for 5 hp motors atleast as existing make (crompton) complete all as specified and directed.

S & F of Fe platform gauges range atleast 1/4th inch to 1/2 inch as per existing iron composition such as mild steel with high quality welding and reveted joints incluiding all fixtures such as nuts bolts any other fixture assessories , channel suitable for any crane size and capacity with all accessories including reviting and welding work complete all as specified and directed.

M & L spray painting of synthetic enamal of single coat paint of matching color over one coat of red-oxide primer duly smooth funshing /scrubing of old paint surface including letter writing with as existed icluding repair/welding of unservisable door hinges, locking arrangements etc of LT pannel of any size complete all as specified and directed. Note:- Necessary T&P,nut bolts,washers etc.required during repairs incl in above coated rate is done at your end.

M & L for spray painting of synthetic enamal of single coat paint of matching color over one coat of red-oxide primer duly smooth funshing /scrubing of old paint surface including letter writing as existed of cranes of any capacity and all as specified and directed Note:- Necessary T & P required arrangement incl in above coated rate is done at contractor end

Supply and replacement panel (60.4cmX50.7cmX10.8cm) with body seven contactor nine fuse grip three over load relay , transformer with pendent box suitable of 10 to 20 ton capacity including all accessories as per existing all as specfied and directed

S & F in repairs of motors as existing make and model of 10 ton capacity complete all as specified and directed.

S & F in repairs of motors as existing make and model of 20 ton capacity all as specfied and directed

S & F in repairs of thruster motor upto 20 ton capacity completetely all as specfied and directed

S & F in repairs of wheels including bearings & other connected accessories for5 to 10 ton capacity of cranes including replacement of shaft all as specified and directed Note:- item to be replaced with the concurence of MoU of OEM's of cranex/TIB Engg/Pull mac/ Pioneer

Maintenance and repair/regular and periodical servicing of mecanical laundary including fault finding of dryers and washing machines, cleaning/servicing , welding of parts, Breakdown Maintenance/ testing of the washing machine and dryers and replacement of mechanical spares/parts of electrically with electric motor , hose pipe ,controle pannels,protective pannels ,main switches, bearing , housing ,wire , drum ,display mechanism , control system, cable and switches etc for the following capacity of machines at 510 ABW. - Notes - 1.) Test Certificate will be provided by contractor duly signed by authoriesed OEM's after servicing/ testing of performance in all respect as specified and directed. 2.)T& P and essential safety gaurds are requied at the site and same managed by contractor. 3.)Spare parts required will be measured and paid seperately.

Washer capacity of 25 Kg

Dryer cacity of 60 Kg

S & F in repairs , Bellow Hose pipe for drain -Z shapeas existing complete all as specified and directed

S & F in repairs , Bellow Hose pipe for drain - straight as existing complete all as specified and directed

S & F in repairs , over flow Hose pipe for drain - straight as existing complete all as specified and directed

S & F in repairs , Hose pipe for detergent - L shape as existing complete all as specified and directed

S & F in repairs , water inlet pipe for washer capacity for 25 kg as existing complete all as specified and directed

S & F in repairs , inlet water solenoid valve as existing complete all specified and directed.

S & F in repairs , steam solenoid valve as existing complete all specified and directed.

S & F in repairs , coil for steam solenoid valve as existing complete all specified and directed.

S & F in repairs , 4 way water solenoid valve as existing complete all specified and directed.

S & F in repairs , chemical dispenser hose pipe as existing complete all as specified and directed.

S & F in repairs , suitable ply V Groove Belt as existing complete all as specified and directed.

S & F in repairs , door handle as existing complete all as specified and directed.

S & F in repairs , variable frequency drive make and specification as existing complete all as specified and directed.

S & F in repairs , complete door lock assembly as existing complete all as specified and directed.

S & F in repairs , electric heater make and specification same as existing complete all as specified and directed.

S & F in repairs , motor drive for dryer capacity of 60 kg make and specification same as existing complete all as specified and directed.

S & F in repairs , bearing sleeve for idler, make and specification same as existing complete all as specified and directed.

All as described Ser item No. 145 here-in-before but bearing sleeve for main drive suitable for existing ,make and specification same as existing complete all as specified and directed.

S & F in repairs , main drive pully for the capacity of 60 kg dryer make and specification same as existing complete all as specified and directed.

S & F in repairs ,V belts for idler A- 98 / main B -88 drive for 60 kg capacity dryer, make and specification same as existing complete all as specified and directed.

S & F in repairs , electric motor for main drive incluiding set of bearings , make and complete specification same as existing complete all as specified and directed.

S & F in repairs , door limit swith for existing capacity , make and specification same as existing complete all as specified and directed.

S & F in repairs ,complete confriguration senser for computer DR 9 make and specification same as existing complete all as specified and directed.

S & F in repairs , Thermostat suitable for existing capacity of machine , make and specification same as existing complete all as specified and directed.

Carrying out regular maint complaints such as repair / rectification / replacement of defective items of any size cranes such as no light , monkey faults, MCCB's, DB's , Isolator related faults. etc by providing skilled electrician and one helper at 510 ABW under GE (North) Meerut AOR complete all as specified and directed. Note :- Store required will be provided sparately under relevant items of schedule.

R.D.Builders (BID ID -3373054)

A.V. ASSOCIATES (BID ID -3377992)

m/s sweta trading co. (BID ID -3371739)

AIRCOM (BID ID -3372183)

Manish Enterprises (BID ID -3376775)

NP ENTERPRISES (BID ID -3378023)

Shikha Enterprises (BID ID -3376525)