PROVISION OF DRAIN COVERS IN ASTE UNDER GE AF MARATHAHALLI

Amount

Demolition of Cement Concrete (unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

Demolition of brick work of any type built in cement mortor in foul condition etc complete all as specified

Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc including removal of debries outside MOD Land complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) in foundation, filling and mass concrete all as specified and directed.

M & L for Providing precast cement concrete solid blocks masonary , 1:3:6 (Type C -1) using 20mm graded crushed stone aggregate exc 10 cm in width and setting in cement mortar 1:6 all as specified and directed.

M&L for rendering 15mm thick in cement 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L Plain cement concrete (1:2:4), type B-1 (using 20mm graded crushed stone aggregate) as in benching, bed plates, coping and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specified and as directed.

M&L Providing, precast cement concrete 1:2:4, type B-1 (20 mm graged crushed stone aggregate) as in manholes cover slab, etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:4 complete with joints to match complete all as specified

M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Removing and taking out the earth/mud/vegtation etc from underneath of culvert and drains etc to a distance exc 1.50km but n.exc 5km at depositing where directed.

M & L for mild steel frame work such as grill, gratings, etc with ends of bars shoulderedand /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work corn-conforming to Fe.290. Gde -E-165, complete all as specified and directed.

S&F rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment as in gusset plate conforming ot Fe- 410-W-(Gde-E-250) quality A etc complete.

M&L for preparation of new surfaces of steel and iron surface of any description, not otherwise descriped over 10 cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide complete all as specified

Removing building materials etc. to a distance 1.50km but n.exc 5km out side MoD/Unit land including loading, unloading and stacking at the destination etc. complete all as direction of Engineer-in-charge,

AATHITHYABUILDERS

ARUNOTHAYA TRADERS

B5BUILDING SOLUTIONS

G K CONSTRUCTIONS

PRAGATHI BUILDERS

M/S Suresh Raju