Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.0 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹42.2 L+₹8.1 L (23.7%)Rejected-AOC | L2 | Rejected-AOC Being not L1 | |
| 3 | L3₹43.6 L+₹9.5 L (27.8%)Rejected-AOC | L3 | Rejected-AOC Being not L1 | |
| 4 | L4₹44.9 L+₹10.7 L (31.4%)Rejected-AOC | L4 | Rejected-AOC Being not L1 | |
| 5 | L5₹45.9 L+₹11.7 L (34.4%)Rejected-AOC | L5 | Rejected-AOC Being not L1 |
Tender Value
₹41.2 L
EMD Value
₹82,400
Closing Date
15 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri M Saravanan, IDSE, GE
Garrison Engineer North 35 Allenby Lines Secunderabad 500087
ADDITIONS ALTERATIONS TO ROOFING OF BLDG NO 207 208 209 AT AMMUGUDA OF 3 TRG BN 1 EME CENTRE UNDER GE NORTH SECUNDERABAD
2022_MES_552484_1
8614
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER NORTH SECUNDERABAD
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER (NORTH) SECUNDERABAD
₹82,400
Yes
2 Jan 2023
16 Sept 2022
17 Oct 2022
16 Sept 2022
15 Oct 2022
1 Oct 2022
Amount
Dismantling of asbestos cement sheet /Plain or corrugated steel sheeting, (corrugated or semi corrugated) in roof covering complete all as specified and as directed.
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based corrugated steel sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as roof covering/cladding to wall fixed with self tapping (SD) screws complete all as specified and as directed.
Supply and fix pre-painted galvalume aluminium zinc coating galvanised based plain steel/corrugated sheet of 0.50 mm thick of approved colour having tensile strength of 550 Mpa as ridge, gutters fixed with self tapping (SD) screws complete all as specified and as directed.
Dismantling timber Scantling framed work in fillets, rails, posts, rafters, purlins, etc., under 40 Sqcm in section complete all as specified and as directed.
Dismantling timber Scantling framed work 40 sqcm and over in section, in any position and removing store complete all as specified and as directed.
S&F wind ties for roof including securing bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc., complete all as specified and as directed.
Supply and fix rolled mild steel sections of Fe 410-W (Gde E-250) QUALITY “A” frame work as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates complete all as specified and as directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs / blankets any thickness including cover fillets or frame work complete all as specified and as directed.
S & F E Grid suspended false ceiling grid system of size 600 x 600mm with main runner 39x29.7x0.60mm cross tee 29x24.7x0.60mm and wall angle 22.2x22.2x0.50mm ceiling suspended with 2 to 2.5 mm dia GI wire hanger fixed to purlin / truss etc complete (Main runner, cross tee, wall angle of MS galvanised with PPCGS) fixed to frames etc., complete all as specified and as directed.
Material and labour for non asbestos fibre cement building boards 4mm thick fixed or laid/ inserted to timber/GI/Aluminium framework etc., complete all as specified and as directed.
Labour only for Non-asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework complete all as specified and as directed. Note : Serviceable non-asbestos fibre cement building boards obtained from Item No 8 shall be reused.
M & L for White wash in three coats on asbestos cement sheet surfaces or concrete surfaces as in ceiling including preparation of surfaces complete all as specified.
Demolition cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and as directed
M&L for 75 mm thick PCC 1:3:6, type C2 (using 40mm graded stone aggregate) in plinth protection laid in alternative bays finished even and smooth without using extra cement including making 10 mm wide grooves to full depth at 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ratio of 1:3 by weight and top 10 mm depth sealed with sealing compound grade ‘A’ complete all as complete all as specified and as directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar with all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stone work and precast concrete articles including disposal of the rubbish out off the premises complete all as specified and as directed.
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.
Material and labour for brick work with fly ash bricks old size, straight or curved on plan exceeding 6.0 metre mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
M&L for PCC 1:2:4 type B1 (using 20mm graded aggregate) in copings, kerbs, channels, water through and the like including weathering, slightly rounded or chamfered angles and throating as directed chamfered necessary formwork complete all as specified and as directed.
M&L for reinforced cement concrete(nominal mix) type B1 1:2:4 (using 20 mm graded stone aggregate) as in RCC bands supported on walls, beams and columns in floors, roof, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, over hangs, etc. also splays between floors and beams etc as in rough finished flat surfaces of concrete complete all as specified and as directed.
M&L for mild steel TMT bars 10mm dia and over including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.
M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders etc., including all cutting bending, binding, cranking placing & binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size exceeding 1.5 square metre but not exceeding 4 square metre each complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from frames) of size not exceeding 1.5 square metre each complete all as specified and as directed.
S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed complete all as specified and as directed.
S & F pressed steel frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and as directed.
M&L for PCC bed block in 1:3:6 type C1 using 20mm graded stone aggregate for back filling of steel chowkats complete all as specified and as directed.
M&L for cutting holes in brick wall built in cement mortar for inserting hold fast and making good the disturbed portion in cement mortar 1:3 depth of embedded portion exceeding half brick & n.exc one brick complete all as specified and as directed.
S & F 35 mm thick factory made second class hardwood, plain framed panelled shutters (any number of panel) with panels of timber flat on both sides(feather edged) or of veneered particle board medium density wood particle board with commercial veneering on both faces complete all as specified and as directed.
S & F 35 mm 2nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc., complete all as specified and as directed.
Supply and fix steel window with side hung double shutters of gauzed shutter openable inside and glazed shutter openable outside with projecting type hinges, steel handles and steel peg stay with glazing bars dovetailed or welded and ventilator fixed type complete all as specified and as directed.
M&L for Framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed.
Supply and fix in 4 mm thick sheet glass, ordinary quality and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames of any size complete all as specified and as directed.
Supply and fix in 4 mm thick figured glass, pin head type and glazing with oil putty and glazing clips in metal frame and second class hard wood beading in suitable size for wooden frames not exceeding 0.5 sqm in each pane complete all as specified and as directed.
S&F 150 mm extruded aluminium alloy handle, fabricated type, anodised complete all as specified and as directed.
S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.
S&F 100 butt hinges extruded aluminium alloy with galvanised mild steel hinges complete all as specified and as directed.
S&F MS sliding door bolts plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 Nos bolt and nuts, four on bolt plate and two on staple plate of 300mm length of bolt complete all as specified and as directed.
S&F for Mild steel 300 mm ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.
S&F in repair aluminium powder coated (fancy type) tubular curtain rod, 20mm dia including bracket complete all as specified and as directed.
S&F for Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc., complete all as specified and as directed.
Taking down cement plaster of any description and thickness on brick walls including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.
Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 without using extra cement complete all as specified and as directed.
M & L for rendering 15 mm thick in two coats, 10 mm thick in cement plaster 1:6 and 5 mm thick in cement plaster 1:4 mixed with integral water proofing compound as per manufacturers instructions, on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.
Supply only integral water proofing compound complete all as specified and as directed.
M & L for preparing newly plastered wall surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer using chalk whiting etc., complete all as specified and as directed.
M & L for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.
M & L for complete removal of existing treatment of wall and applying two coats of distemper oil emulsion on walls over 3mm thick wall care putty complete all as specified and directed.
M & L for preparing the old plastered or unplastered decorated surfaces of walls and applying two coats of white wash complete all as specified and as directed.
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm in width or girth, not otherwise described and apply two coats of synthetic enamel paint (ordinary tint) including priming with red oxide, zinc chrome complete all as specified and as directed.
M&L for preparation of new or previously untreated wooden surfaces of any description, over 10 cm in width or girth not otherwise described applying two coat of synthetic enamel paint including one coat of pink primer etc., complete all as specified and directed.
M&L for preparing old painted surfaces of walls and applying two coats of weather proof paint on external surfaces of walls and ceiling, including necessary scaffolding and safety precautions to the work complete all as specified and as directed. Make : Apex from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux
Dismantling stone slabs and tiles of any description or thickness in floors aprons etc., laid bedded and pointed in any mortar complete all as specified and as directed.
Demolition of concrete in ground floors (un re-inforced) and paving n.exc. 15 cm thickness (below or above ground level) and including removal of rubbish/ demolished materials outside of MoD land complete all as specified and directed
M&L for 75mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate ) in sub base of floor complete all as specified and as directed.
M & L for chequered cement concrete tiles 20 cm x 20 cm x 25mm thick set, over screed bed or bedding layer in cement mortar 1:6, 20 mm thick for laying floor finishes jointed and pointed in neat cement slurry in floors with grey cement and pigments complete all as specified and as directed.
Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc., and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and as directed.
Material and labour for point wiring complete with stranded copper conductor 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded drawn through and including rigid 20mm dia PVC medium grade conduit and conduit accessories duly ISI marked on surface etc., with new sunk type pressed steel terminal boxes suitable for switches duly painted with two coats of red oxide zinc chrome primer with suitable hylam sheet cover of suitable size for mounting of switches, regulators and drawing continuous earth wire with one run of 1.5 Sqmm (nominal area) PVC insulated unsheathed cable up to 1100 V grade FRLS conforming to IS - 694 multistranded copper conductor as earth wire and connecting to common earth dolly and making good the disturbed wall surfaces to match with the existing surfaces complete all as specified and as directed for the following :- One light point/Bell point controlled by one, one way switch 5 amps, SP
All as per item No. 58 above but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator complete all as specified and as directed.
All as per item No. 58 above but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed.
All as per item No. 58 above but for one 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified and as directed.
All as per item No. 58 here-in-before but using 2.5 Sqmm single core copper conductor cable of multistranded PVC insulated unsheathed 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor complete all as specified and as directed.
S & F switch piano single pole flush type 5 amps, 230 volts complete all as specified and as directed.
S & F switch socket combination flush type multipurpose 5 pin 5 amps, 230 Volts complete all as specified and as directed.
S & F switch socket combination 2 in 1 multipurpose 3/5 pin 5/15 amps flush type complete all as specified and as directed.
S & F Bell push switch 5 amps flush type complete all as specified and as directed.
S & F electronic ceiling fan regulator stepped type heavy duty suitable to work on 230 volts complete all as specified and as directed.
S & F lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings fixed with wooden round blocks complete all as specified and as directed.
S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed.
S & F Call bell AC 230 volts single phase complete all as specified and as directed.
S & F LED tube light fitting 20 Watts , 230 volts, box type, epoxy powder coded CRCA sheet housing with reflector cover channel, with electronic drive, bipin holders, connector block, internally pre wired etc with necessary mounting arrangements including all accessories with new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting all as directed by Engineer-in-charge. Make : Havells Cat No-REGALBATTENT8UPTO 1X22WSSB SWH incl Tube Rod Cat No-PHOTONULTRA2.01213 T8SSTL20WLED865SPC, Wipro cat No WI0921208 incl Tube Rod LL13-181-65SE, Philips Cat No - TMC501P1xT-LED22WP3241 incl tube rod 20w.
S & F security LED Light fitting 1x35 Watt complete with Bracket made out GI pipe med grade 25mm of L Shape 1.5 Mtr long incl clamps and nuts bolts etc., complete all as specified and as directed Make: Havells Cat No - ENDCITYLITPLATE+SL35WLED 757SASYBOPCWOSPD, Wipro Cat No LR13-501-XXX-57-XX, Philips Cat No - BRP030 LED35 CW MR PSU GR DX.
S & F sheet metal enclosure MCB DB SPN 8 way with 200 amps rated bus bar 240 volts double door with magnetic locking system complete all as specified and as directed.
S & F MCB SPN 240 volts suitable for fixing in MCB DB of capacity 40 / 60 amps complete all as specified and directed.
S & F MCB SP 5 to 40 Amps 240 volts for fixing on MCB DB's complete all as specified and as directed
M&L for earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GI earth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mm bore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wire mesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I, 2009.
S & F in repair Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs complete all as specified and as directed.
Supply and fix vertical type TPN distribution board of 4 way double door with incoming MCCB TPN 415 volts AC, 3 phase, 50 Hz, 16 KA Breaking Capacity with fixed magnetic setting for current ranging of capacity 63 Amps including MCCB 4P conforming to IS 13947 (P-2) IEC: 947 made out of CRCA sheet housing with powder coated conforming to IS 13032, IS 8623, BS 5486 accommodated suitably in a mild steel enclosure weather proof mild steel sheet having hinged and robust locking arrangement including painting by red-oxide one coat and duly powder coated complete all as specified and as directed.
M & L for Submain wiring with 2 runs of single core 4 Sqmm FRLS PVC insulated unsheated multistranded 1100 volts grade with copper conductor drawn through and including non-metallic rigid PVC conduit concealed and conduit accessories of medium grade not not less than 20 mm dia including one run of single core 4 sqmm FRLS PVC insulated unsheated multistranded 1100 volts grade with copper conductor cable as earth continuity conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain wiring complete all as specified and as directed. Note: 3 runs of 4 Sqmm cable and 1 run of PVC conduit shall be measured as one unit length.
Himagiri Constructions
M/s GM Constructions
K LAKSHMAN SINGH AND CO
AMK Builders
SKY CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .