REPAIR/ REPLACEMENT OF STREET / SECURITY LIGHT, STREET LIGHT POLE, CABLE AND CERTAIN CONNECTED WORKS AT AIR FORE STATION NATHATOP

M&L in repair/replacement of LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K, SPD of voltage rating > 10kv including new lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified Make : Havell/ Cromption greaves/Bajaj/Wipro or approved by GE

M&L in repair/replacement of LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K,SPD of voltage rating > 10kv including new lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : HPL cat part No equivallent to Havell/Cromption greaves/Bajaj/Wipro or approved by GE

M&L in repair/replacement of LED street light fitting 100 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K, SPD of voltage rating > 10kv including new lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : Havell/ Cromption greaves/Bajaj/Wipro or approved by GE

M&L in repair/replacement of LED street light fitting 120 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 66 protection, PF>= 0.90, lumen efficacy >= 100 lumen/watts, 5700 K,SPD of voltage rating > 10kv including new lights to be fixed in existing bracket at existing pole/bldg or other extra welding works complete all as specified. Make : Havell/ Cromption greaves/Bajaj/Wipro or approved by GE

Supply & fixing in repair/replacement of yellow colour street light fitting 150 watt LED energy saving and enviromental friendly long life versatile pressure dia cast aluminium IP66 roadway luminaire with high power LED as light source of capacity 150 watts SPD of voltage rating > 10kv ,3000 Degree kelvin with suitable driver and surge protection and all standard accessories etc complete all as specified. Make : Havell/Cromption greaves/Bajaj/Wipro or approved by GE

Supply & fixing in repair/replacement of yellow colour street light fitting 180 watt LED energy saving and enviromental friendly long life versatile pressure dia cast aluminium IP66 roadway luminaire with high power LED as light source of capacity 150 watts SPD of voltage rating > 10kv ,3000 Degree kelvin with suitable driver and surge protection and all standard accessories etc complete all as specified. Make : Havell/Cromption greaves/Bajaj/Wipro or approved by GE

Supply and fix in repair/replacement of 120 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv luminaire engergy saving, environmental friendly long life with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation complete as specified and directed Make : Havell/Cromption greaves/Bajaj/Wipro

Supply and fix in repair/replacement of 70 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv engergy saving, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation complete as specified and directed Make : Havell/Cromption greaves/Bajaj/Wipro or approved by GE

Supply and fix in repair/replacement of 150 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv engergy saving, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation complete as specified and directed Make : Havell/Cromption greaves/Bajaj/Wipro or approved by GE

Supply and fix in repair/replacement of 250 watt LED flood light, with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv engergy saving, environmental friendly long life exclusive innovative die cast aluminium flood light with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation complete as specified and directed Make : Havell/Cromption greaves/Bajaj/Wipro or approved by GE

Taking down and dismantling old highmast up to 16 mtr height and repair/replacement of High galvanized mast LEd light suitable for 9 lantern symmetrically fitted along with their control gear and having two point suspension system with stainless steelwire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike complete all as specifed and as directedalong with undermentioned desciption Note : (i) T&P like hydra and other major equipment shall be included in the quoted rate up to 16 Mtr height. (ii) Spare parts shall be measured and paid seperately

Suply only of the following items shall be measured and paide seperately under respective items.

Supply only luminaires Carriages suitable hightmast up to 16 mtr height. The luminariage is fabricated from ERW steel pipes designed to act as electric conduit with holes for cable entry. It is fitted with junction box mounting breaket (s) and is in two halves joined by bolted flanges to permit removal from an erected mast. Luminaires fixing arms and plates are welded to the carriage. Carriage is fitted with buffer arrangements to prevent damage to the mast finish during movement. Rollers or other moving parts are not required.

Supply only Winches system suitable for highmast height up to 16 mtr height. The winches are completely self sustaining, self lubricating by means of oil bath, grooved double drum with a grear ratio of 53:1. Single gear and double gear design of winches are available in BEL range. Winches can be operated by a motor or maually. Power tools for operating the winch are available in integral or common versions. BEL winches have been rigorously type tested based on the relevant standards complete all as specified and directed.

Supply only suspension System suitable for highmast up to 16 Mtr height. The suspension wires are stainless steel grade 316/304 of 7/19 (6/19 WSC) construction and are provided with stainless steel thimble and terminals. Normal suspension systems are with two continuous wire ropes without any intermediate joints. Suspension systems supplied by BEL are property designed with suitable clamps to prevent entangling of wire ropes and cables. This unique arrangement increases the life of the wire ropes and cables complete all as specified and directed.

Supply only electrical System suitable for hight mast upto 16 Mtr height, Multi core flexible power cables are provided for power supply, Cables are with EPR insulation, PCP sheathing and cotton braiding to get the required strength and flexibility. PVC insulated and PVC sheathed cables are also supplied in economy and popular systems. These cables terminate in the base compartment through specially designed metal cload plugs and sockets. At the mast head cables are connected to weather proof cast aluminum/HDG junction box on the luminaires carriage. The power cables are factory cut for ease of installation complete all as specified and directed.

Supply only anchor plate suitable for highmast light up to 16 mtr height with hight tensile studs. Mechanical properties ot the studs complete all as specifid and directed.

Supply only 250 watt LED flood light suitable for highmast up to 16 Mtr height with IP 66 protection, PF>=0.90, lumen efficiency >=110 Lm/Watt, 5700 k SPD of voltage rating > 10kv luminaire engergy saving, environmental friendly long life with high power led as light source suitable for highlighting architectural feature or area lighting also suitable to rough services /installation complete as specified and directed

M&L for construction of foundation suitable for hight mast up to 16 mtr height. The foundation bolt set comprises anchor plate with hight tensile studs. Mechanical properties of the studs are given in the data sheet. As foundation bolts are very important in the structural safety of the system.supply these bolts as part of the total system. Exposed portion of the stud/nuts and washers are hot dipped galvanized to increase resistance corrosion. Note : Foundation shall be suitable for highmast and enverionment wind of 200km/hr &Temp -20' C to 45' C and snowfall and shallbe properly mainufacture desigined for as per direction of GE

Supply and fixing in repair/replacement of LED Building light of 30 watt, IP66 power coated pressure die cast aluminium compact high power LED building light with heat resistant toughened glass complete with GI pipe bracket light grade 1.2m long of suitable bore fixed on wall with GI clamps, nuts and bolts of suitable size complete all as specified and as directed. Make :Jaqar cat pt No LSRT01S150XW or equivallent to Havell/Cromption greaves/Bajaj/Wipro or approved by GE

Supply and fixing of surge protection device single phase Type I (SPD) Class B-3 Phase pluggable with serviceability indicator single phase with neutral for protection of equipment against lightning and switching surges with daettachable type,of phase description Un 275 volts,Iin 5 kA , voc 6kv Imax 10 kA ,Iimp 12.5 kA and neutral Uc 275 volts,I imp 30,voc 6kv kA,In 30 kA ,Imax 60 kA including protected IP 20 complete Confiring to IEC/EN 61643-II all as specified make : Havells/schneider electric/L&T/ABB /JMV all as specified

Supply, fixing and installation of Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts , nuts and screws as specified type 410 SP-31 (9 metres long) complete all as specifidedc and directed by Engr-in-Charge Note : Excavation and earth work shall be measured and paid seperately

S&F in repair synthetic short entry cable glands with reducing sealing ring of sealing dia 5-11 mm for protection of incoming and outgoing cable running in Junction box fiited properly complete all as specified and directed.

Taking out of existing LT UG cable of size 3½/4 core, 50 to 70 sq.mm including taking out protection bricks complete all as specified and directed. Note: Earth work & excavation will be measured and paid separately

All as per item No. 17 hereinbefore but size of cable 25 to 35 Sqmm, 3½/4 core complete all as specified and directed.

All as per item No. 17 hereinbefore but size of cable 10 to 16 Sqmm, 3½/4 core complete all as specified and directed.

Supply and laying in repair/replacement in trenches / ducts, passing through pipe / fixing on poles 1100 volts grade, ISI marked of size 70 Sq.mm 3.5 core, LT cable (heavy duty), XLPE insulated served with an inner sheathing of PVC tape armoured with galvanized steel wire or tape and over all PVC sheathed with stranded aluminium conductor cable including commissioning and testing complete all as specified and directed. Note: (i) Necessary test results like continuity test, megger tests shall be submitted to Engineer-in-Charge before the cable is laid. (ii) Excavation & earth work will be measured and paid separately.

All as per Item No. 20 herein before but cable of size 50 sqmm, 3.5 core complete all as specified and directed.

All as per Item No. 20 herein before but cable of size 35 sqmm, 3.5 core complete all as specified and directed.

All as per Item No. 20 herein before but cable of size 25 sqmm, 3.5 core complete all as specified and directed.

All as per Item No. 20 herein before but cable of size 16 sqmm, 4 core complete all as specified and directed.

All as per Item No. 20 herein before but cable of size 10 sqmm, 4 core complete all as specified and directed.

All as per Item No. 20 herein before but cable of size 25 sqmm, 2 core complete all as specified and directed.

All as per Item No. 20 herein before but cable of size 16 sqmm, 2 core complete all as specified and directed.

All as per Item No. 20 herein before but cable of size 10 sqmm, 2 core complete all as specified and directed.

M&L for cutting the existing cable of size 70 Sqmm from loop near the street light panel/pole and making necessary connection with end termination with aluminium lugs, PVC taps, nuts, bots of suitable size without jointing kit with cable glands suitable for LT U/G cable complete all as specified and directed. Note : (i) The cost T&P and laour will be included as unit rate (ii) If jointing kit of any type is required will be measured and paid seperately.

All as per item No. 29 hereinbefore but size of cable 50 Sqmm, 3.5 core complete all as specified and directed.

All as per item No. 29 hereinbefore but size of cable 35 Sqmm, 3.5 core complete all as specified and directed.

All as per item No. 29 hereinbefore but size of cable 25 to 10 Sqmm, 3.5/4 core complete all as specified and directed.

M&L in repair/replacement of LT cable straight through jointing kit heat shrinkable type suitable for XLPE/ PVC insulated cable of size 3.5/4 Core, 10 sqmm to 16 sq.mm complete including testing the cable joint for healthiness, cutting & removing unserviceable joint, preparation of both ends of cable to be joined with necessary stretching, aligning, making joint complete all as specified and directed

All as per Item No 33 herein before but straight through of size 25 sqmm to 35 sqmm, 3.5/4 core complete all as specified and directed.

All as per Item No 33 herein before but straight through of size 50 sqmm to 70 sqmm, 3.5 core complete all as specified and directed.

M&L in repair/replacement of LT cable end temination heat shrinkable type suitable for XLPE/ PVC insulated cable of size 3.5/4 Core, 10 sqmm to 16 sq.mm complete including testing the cable joint for healthiness, cutting & removing unserviceable joint, preparation of both ends of cable to be joined with necessary stretching, aligning, making joint complete all as specified and directed

All as per Item No 36 herein before but straight through of size 25 sqmm to 35 sqmm, 3.5 core complete all as specified and directed.

All as per Item No 36 herein before but straight through of size 50 sqmm to 70 sqmm, 3.5 core complete all as specified and directed.

M&L for Aluminium Lugs of size 10 to 16 qmm complete all as per specified and directed.

M&L for Aluminium Lugs of size 25 to 35 qmm complete all as per specified and directed.

M&L for Aluminium Lugs of size 50 to 70 qmm complete all as per specified and directed.

M&L horizontal Boring under hard standing/ pavements or roads manually using suitable auger for insertion of GI pipes up to 100 mm bore and making good the disturbed surface complete all as specified and as directed. Note: GI pipe will be measured and paid separately.

S&F in repair/replacement of GI tubes 40 mm bore dia light grade with all fittings laid in trenches or inserting in horizontal boring complete all as specified and as directed.

S&F in repair/replacement of GI tubes 50 mm bore dia light grade with all fittings laid in trenches or inserting in horizontal boring complete all as specified and as directed.

S&F in repair/replacement of GI tubes 80 mm bore dia light grade with all fittings laid in trenches or inserting in horizontal boring complete all as specified and as directed.

Supply and fixing in repair/replacement of DWC HDPE black pipe 80 mm Conforming to IS 16205 bore for open/underground laying cable, cut to size and making the pipe for cable protection including cutting of road etc/cutting of PCC and making the good surface complete all as specified and directed by Engr-in-Charge. Note :- (a) The using of GI Clamp in the wall/drainage rate are deemed to be included in the quoted rate. (b) Drawing existing cable through DWC pipe shall be deemed to be included in the quoted rates.

All as per Item No 46 herein before but pipe of size 50 mm complete all as specified and directed.

M&L for Preparation of surfaces of steel electric poles/ masts of height up to 7.5m/16 (exposed) by scraping with emery paper and making free from rust, dust and any foreign material and applying one coat of aluminium paint including lettering on poles such as Pole No and source point of electric supply with white enamel paint on black back ground, zebra painting up to 1.2 m height from ground level with two coats of synthetic enamel paint in 30cm height of alternate bands all as specified and as directed.

Cutting, welding of doors front and rear side LT panel, painting and marking of existing LT Panels with alphabet number not less tha 10 mm including rubbing with two coats of enameled systhetic paint including damaged foundation of different size in various location with complete AOR of GE (AF) Bareilly complete all as specified and directed Note : Cost of material like hinges, locks etc and other material required at site shall be include in the unit rate.

M&L for plain cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as in foundations, filling and mass concrete for foundation stree light/high mast pole 8/16 meter complete all as specified and as directed.

M&L for PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping of stree light/high mast pole 8/16 meter all as directed including use & waste of necessary form work all as specified and as directed.

S&F in repair/replacement of Off Load changeover switch 415 V, 4 pole, 250 Amps capacity with sheet steel enclosure including necessary connection complete all as specified and as directed. [Make: Legrand/ L&T/ ABB/ Schneider/Indo Asian]

S&F in repair/replacement of Off Load changeover switch 415 V, 4 pole, 160 Amps capacity with sheet steel enclosure floor/wall mounted including necessary connection complete all as specified and as directed. [Make: Legrand/ L&T/ ABB/ Schneider/Indo asian]

S & Fin repair/replacement of street light bracket made out of 40/50 mm dia GI heavy grade tubing not less than 1.5 Mtr long bend to shape including pole clamps made out of 50 x 6 FI and nut bolts and washers all as specified and directed including taking down old.

Supply and fix 1.5 Sqmm 2 core cable, PVC insulated and PVC round sheathed, copper conductor(flexible) industrial cable, 1100 volt, confirming to IS :694 including replacement of old unsv cable. Note : Cable is reqd to be connected from street light to junction box with proper lugs.

Supply and Fix Integralf LED aviation obstruction light luminaires of capacity 10 watts comprising of aluminum housing with polycarbonate enclosure having 302 Nos. LED and accessories suitable for fixing at directed location. Make ; Bajaj (Cat No. BGAV 302 LED) or equivallent model in Havells / Philips / CROMPTON.

M&L in repair/replacement of junction box outdoor shall be made out of Polycarbonate with glass fiber reinforced than 205mm x 255mm x 112 mm(the cable size upto 25 sqmm). The polycarbonate junction box shall be environmental friendly, recyclable, halogen & silicon free, anti acid & anti corrosive. The Junction Box shall be rated for Degree of ingress Protection IP 66 in accordance with IEC 60529.Weatherproof, UV resistant. The gasket material of junction box shall be Polyurethane and the gasket shall be internally embedded. The Junction Box shall be complies with requirements of the standards IEC 60998. The Junction Box with 25Amp Connectors or Terminal Trip or Bus Bar. The Junction Box / Enclosure shall be tested as per IEC including one No. 4 pole connector and chromium plated clamps and nut bolts, cable glands with lock nuts of 2 Nos for each box complete all as per manufacturer’s Make : Cat Part :- KF 2525 B of Hensel/Siemens/GE Power/Rittal/Legrand

S & F in repair/replacement of MCCB 3 Pole, 415 V, Fixed type,thermal magnatic load ICS100% of Icu as per IEC 60947-II, 0.8 ln to 1ln, 63 Amps including spider link, nut, bolt having breaking capacity 25 KA complete all as specified and directed. Make:Indoasian/Standard/Havells/Schneider/ABB or equivalent as approved by GE .

S & F in repair/replacement of MCCB 3 Pole, 415 V, Fixed type,thermal magnatic load ICS100% of Icu as per IEC 60947-II, 0.8 ln to 1ln, 100 Amps including spider link, nut, bolt having breaking capacity 25 KA complete all as specified and directed. Make:Indoasian/Standard/Havells/Schneider/ABB or equivalent as approved by GE.

S & F in repair/replacement of MCCB 3 Pole, 415 V, load ICS100% of ICU, 0.8 ln to 1ln, 160 Amps including spider link, nut, bolt having breaking capacity 25 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.

S & F in repair/replacement of MCCB 4 Pole, 415 V, load ICS100% of ICU, 0.8 ln to 1ln, 100 Amps including spider link, nut, bolt having breaking capacity 25 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.

S & F in repair/replacement of MCCB 4 Pole, 415 V, adjustable type, thermal magnatic load ICS100% of ICU, 0.8 ln to 1ln, 160 Amps including spider link, nut, bolt having breaking capacity 25 KA complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.

S & F in repair/replacement of MCB SP 6 to 32 Amp complete all as specified and directed. Standard/Havells/Legrand or equivalent as approved by GE.

S&F in repair/replacement of galvanised steel earth plate electrode 600 mm X 600 mm X 6 mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of earth plate not less than 1.50 m below normal ground level, connected to galvanised earth strip of size 25 X 4 mm by means of nuts, bolts, check nuts & washers of galvanised iron or steel all as shown on electrical plate No. 3 of MES schedule 2020, Part–I (Specifications) and connected to main switch board / main DB’s / earthing test point including all necessary excavation and earth work in any type of soil, adequate quantity of charcoal dust & common salt all around the earth plate minimum 150 mm in all directions with & including watering pipe 20 mm dia GI medium grade, GI funnel made out of 0.63 mm thick GI sheet, wire gauge, , GI protection pipe light grade 40 mm bore including testing on completion of job complete all as specified and directed.

S&F in repair/replacement of earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop GI strip 20x3mm copper strip, insulator,clips etc. complete all as speciefed and as directed.

S&F in repair/replacement of automatic street light NATURE SWITCH for automatic switching of streets lights based on lux level of natural light. The sensor (nature switch ) along with suitable power contactor, MCB and support terminals should be enclosed in pole /wall mountable enclosure made out of rust proof, electric shock proof, termite proof and FR grade special moulding compund (sintex make SMC Junction Box or equivalent as approved by GE ) conforming to IP-54. The contactor, MCB and circuit wiring shall be suitable enough to take load of 8 KW single phase load /8 KW load equally distributed over 3-phase (7 KW/phase), contactor rating 25 Amps, 4 pole and MCB (single pole) rating 32 amps (SP-3 Nos) complete including sheet metal enclosure with stand made of suitable size angle iron and grouting of enclosure using cement concrete 1:2:4 type B-I (using 20mm graded crushed stone aggregate) all as specified and directed by Engineer-in-Charge including taking down old. Make :- Healer and Model No. SWADEEP-02EC8KW 3 PHASE .

M & L in replacement of LED Driver with surge protector suitable for 60 to 90 watt LED fitting with universal voltage 90-300 volts alternating current ,short circuit,over temperature and over load protection complete all as specified and directed by Engr-in-charge.Make C&S/ Wipro /Philips/syska/havells/Bajaj or equivalent as approved by GE. Note:-Driver & surge protector shall be of same make or suitable for LED fitting as available at site.

M & L for brazing work with GI brazing alloy rod with help of oxygen and LPG cylinder using required galvanised strip of size 20 mm x 3 mm upto 30 cm length along with cleaning work of strip with descaling solution/emery paper which are laid as roof/down conductor on any height of building up to 15 mtr building height complete all as specified and directed by Engr-in-Charge.

Excavation in trenches in any type of soil not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide for laying of cables, RCC poles/stays and struts etc or /getting out cable cover and stacking for reuse/ credit , trimming sides and forming bottom surface all as specified and directed at site.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing surplus excavated soil nexc 50 mtr and depositing where directed at a level n-exc 1.5 mtr above the starting point complete all as specified and directed.

M&L for dry sand cushioning to underground cables after laying and stretching of Cable complete all as specified and directed.

M & L for sub class 'B' brick for covering to under ground cable laid flat transversally width equal to the lenth of the cable complete all as specified and directed.