Special repair to floor, kitchen, tilling, plaster, joinery and plumbing for Qtr No 1, 5, 9, 14, 15, 16, 18, 30, 42 and 47 at Raksha Bhawan under GE New Delhi, Delhi Cantt-10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Taking down chowkhats or frame with shutters without taking off shutters from frames exc 1.5 Sqm but not exc 4 Sqm each & removing from site and making good disturbed portion complete all as specified and directed.

Taking down chowkhats or frame with shutters without taking off shutters from frames not exc 1.5 Sqm each & removing from site and making good disturbed portion complete all as specified and directed.

Taking down shutter only of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

Demolition of brick work built in Cement mortar or cement lime mortar incl all quoins, arches , pillar etc complete all as specified and directed.

M&L for Brick work with sub-class `B' bricks, old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for factory made brown colour solid WPC (wood plastic composite) door frame of size 125 mm x 63 mm double rebate 100% lead free made from single extruded process material with density 780 Kg/m³ complete all as specified and directed. (Make: Echon realm or equivalent in Rajshri/ Ecoste)

M&L for 30 mm factory made solid WPC (wood plastic composite) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture . The density of the shall be as per manufacture instruction complete all as specified and directed. (Make: Echon realm or equivalent in Rajshri/ Ecoste)

M&L for 30 mm factory made solid WPC (wood plastic composite) moulded door shutter single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side, with wood grain texture. The density of the door shutter not less than 600 Kg/m³ and should be 100% lead free door complete all as specified and directed. (Make: Echon Cat No. LPD-11 or equivalent in Rajshri/ Ecoste)

M&L for 24 mm factory made solid WPC (wood plastic composite) moulded door shutter single extruded with 2,4 or 6 raised panel design on the front side with 10 mm deep mould on single side, with wood grain texture. The density of the door shutter not less than 600 Kg/m³ and should be 100% lead free door complete all as specified and directed.(Make: Echon (LPD-11) or equivalent or equivalent in Rajshri/ Ecoste)

S&F 200 mm long Brass barrel tower bolts, with brass screws complete all as specified and directed.

S&F Brass sliding door bolts 250 mm long and fixed with brass screws to wooden doors complete all as specified and directed.

S&F Brass butt hinges 125 mm long type C11 with brass screws fixed to wooden doors complete all as specified and directed

S&F Brass handles 150 mm long polished bright with brass screws complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed in Cement mortar 1:6 as in floor complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7 mm or 450 x 350 x 7 mm thick over 10 mm thick rendering 1:4 CM set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles complete all as specified and directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including pointing with admixture of pigment to match with shade of granite, laid over and including 20 mm thick cement mortar 1:4 complete all as specified and directed.

M&L for rounding the edges of stone slabs one edge, such as steps, cooking platform, and other similar situations complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections including fitting, cleaning for refixing or removal to store complete all as specified and directed.

S & F GI tubing 15 mm bore medium grade with all tube fittings and fixed complete to wall, ceiling or laid in floors etc complete all as specified and directed.

S&F chromium plated brass bib tap fancy type screwed down for iron pipe or for brass ferrule 15 mm bore complete all a specified and directed.

Dismantling boarding, any description, fixed in any position with screws like cupboard/cabinets complete all as specified and directed.

S&F 18/19 mm thick PVC solid double side prelam celluca board of approved colour fixed with screws and SS cleats as in modular kitchen cabinets /cupboards cutting and making required size and shape at site including lipping portion to match with laminated colour complete all as specified and directed. Make: - Brothers woodtrek India private limited/ Rajshri/ Echon

S&F 100 mm long extruded brass handles, fabricated type polished complete all as specified and directed .

S&F 30 mm width of flaps( when open) continuous (piano) hinges, brass complete all as specified and directed.

S&F magnetic catcher and striking plate for cup boards complete all as specified and directed.

Taking down cement plaster on brick wall surfaces including raking out joints, hacking for key, scrubbing down with water etc and removing the rubbish out of Mod Land complete all as specified and directed.

M&L 10 mm thick rendering on ceiling surfaces in cement mortar 1:3 finish even and smooth without using extra cement complete all as specified and directed.

Material and labour for newly plastered or un-plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

M&L 15 mm thick rendering on other than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces as of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L 15 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with liquid water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note:- Liquid WPC shall be measured & paid separately.

Supply only water proofing compound liquid @ 200 ml per bag of cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.

Supply and fix floor door stopper of brass body length of pipe 140 mm and tongue anodized with hard drawn steel spring fixed on floor complete all as specified and directed.

M&L for 25 mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate) as in floors complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) window and ventilator shutters, side hung type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150 mm long - 01 Nos, hinges type B-21 100 mm long - 02 Nos, suitable handle - 01 Nos etc complete all as specified and directed.

Supply only 5.0mm thick heat absorbing/ Reflective glass any size complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and 1.4mm average width of aperture and fixed with tinned tacks or galvanised wire staple etc complete all as specified and as directed.

S&F powder coated ornamental aluminium grill 10 mm dia, 75 X 95 mm aperture, fixed to aluminum frame or wall including aluminum beading complete all as specified and directed.

Cutting holes in brick wall built in cement mortar exc half but not exc one brick for inserting and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M&L for Joist channel, angles or Tee sections of grade Fe 410-W (Gde -E-250) fixed independently without connecting plate etc complete all as specified and directed.

M&L for preparation of old painted steel or iron based surface of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators, socket & light fittings etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L for point wiring with FRLS PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 volts grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed conduit 20 mm dia medium grade ISI marked and its accessories, provision of new galvanised MS sunken box and new hylum sheet 3 mm thick of suitable size, ISI marked for housing the switches and sockets, for the following :-

One light/fan/exhaust fan point controlled by one nos, one way switch.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on same board.

One bell/buzzer point controlled by one bell push

All as per item No 48.00 here in before but with 2.5 Sqmm (for phase, neutral) and 2.5 Sqmm (for continuous earth wire) cable for one 15/16 amp socket out let point on independent board.

S & F switch piano 5 Amps, flush mounted 230/250 volts grade complete all as specified and directed.

S & F switch piano 15 Amps, flush mounted 230/250 volts grade complete all as specified and directed.

S&F Bell push single pole one way 6 Amps modular type, 1 module complete all as specified and directed.

S & F 3 Pin 5 Amps socket outlet (with 2 pin outlet also) complete all as specified and directed.

S & F 3/5 Pin 5 Amps and 15 Amps socket outlet (with 2 pin outlet also) complete all as specified and directed.

S & F ceiling rose 3 terminal PVC/Polycarbonate body complete all as specified and directed.

Disconnecting mains connection and taking out old sub main wiring having two runs of single core 6 sq mm and one single core 4/6 sq mm aluminum conductor cable from the concealed conduit from the wall or ceiling and making good to surface.

M&L in replacement of submain wiring with FRLS PVC insulated unsheathed copper conductor multi stranded 1100 Volts grade heavy duty 2 x 6 Sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 6 Sqmm PVC insulated unsheathed copper conductor multi stranded cable for continuous earth wire and duly connected to common earth dolly all as specified and directed. (The specified runs of single core cables and specified runs of earth continuity conductors and the relevant conduit with accessories shall be measured as one unit length). MAKE Havells/Polycab/RR.

Disconnecting mains connection and taking out old distribution board 8/12 way SPN with 200 amp rated bus bar including MCBs complete all as specified and directed.

S&F factory made, sheet steel distribution boards, SPN 8 ways suitable for mounting MCB conforming to IS-13032, IS-8623, BS-5484 with min 100 Amps rating copper bus bar Make Product Code- 507611 of Legrand/ Havells/ Indoasian.

S&F MCBs 6 to 32 Amps, 10 KA rupturing capacity, IS-8828 marked, complete all as specified and directed. Make :-Legrand/Havells/Indoasian.

S&F MCBs 40 to 63 Amps, 10 KA rupturing capacity, IS-8828 marked, complete all as specified and directed. Make :-Legrand/Havells/Indoasian.

S&F MCBs SPN 32 Amps, 10 KA rupturing capacity, IS-8828 marked, complete all as specified and directed. Make :-Legrand/Havells/Indoasian.

S&F LED Tube light fitting 9 watt white 230 Volt AC complete including connecting up with three core twisted flexible copper conductor cable all as specified Make :-Havells cat part No-LHEXBQP7IN1W009 or equivalent in CG/Halonix.

S&F LED Tube Light of 20 Watt 230Volt(size 4 ft) , box type complete with LED Tube Light 20 Watt & all accessories internally prewired including connecting up with three core sheathed flexible copper conductor cable of suitable size complete all as specified and directed. Make-Havells cat part No-LHEXBLP7PN1W020 or equivalent in CG/Halonix

M&L for taking down of ceiling fan of any size and servicing complete, greasing, painting, changing of ball bearing of any type, Copper rewinding and marking of MES No. etc at site and refixing complete all as specified and directed.

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet, etc. complete all as specified and directed.

Taking down/ dismantling of air ventilation fan, size 250 mm including fan blade and louvers complete all as specified and directed. Note:-The air ventilation fan with complete accessories shall be safely deposited to MES store yard.

S&F in replacement Air ventilation fan 250 mm size suitable for 240V, 50 Hz single phase AC supply including fixing on wall with nut, washer etc complete and necessary electrical connection from ceiling rose to fan connecter with three core sheathed wire of required length complete all as specified and directed. Make: - Crompton cat part no "brisk Air 10'' or equivalent in /Havells / Bajaj.

Material and labour for earthing complete with galvanized steel earth plate 60 cm X 60 cm X 6 mm thick buried vertically in ground to depth not less than 2.25 meters below ground level, with top edge of earth plate not less than 1.5 m below ground level, connected to earth lead GI 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and connection to main switch board of panel, including watering pipe GI 20 mm bore light grade, including protection pipe GI medium grade 15 mm bore for earthing lead, wire mesh, funnel, salt, charcoal dust, excavation and refilling pit with PCC 1:2:4 type B1, CI cover and frame all as shown in electric plate no.3 on page 19-49 of SSR part-I (2009), including testing on completion all as directed.

S&F in replacement earth continuity conductor of size 4 mm dia galvanised iron or steel wire, fixed on wall/buried in ground with and including of fixing arrangements as walls like dash fastener, nuts, bolts, screws, washer etc complete all as specified and as directed.

Disconnecting electrical connection and taking out old unserviceable load line DB's complete all as specified and directed

S&F factory made load line DB's double door made out of 2.15 CRCA mild steel sheet with insulating materials like polyester epoxy coated surface mounting 4 way TPN 415 Volts, IP 43 with suitable busbar, neutral link & earth link suitable for MCCB TPN 100 Amp, 25KA as incomer & MCB SP 6/10/32/40 Amp of 10 KA capacity of 16 Nos as out going complete all as specified MAKE:-Legrands/Havells/Indoasian.

Supply and fixing MCCB, 4 pole, 415 volt of capacity 100 amp, breaking capacity not less than 36 KA , Icu=100% Ics thermal magnetic type adjustable type 80 to 100 % confirming to IEC-60947-II, IS-13947-II , including thimbles, nuts, bolts ,washers etc and connections, replacement of thimbles, minor parts like nuts bolts washer etc. all as specified and directed . Make : Legrands cat part No 420095 or equivalent in Schneider/L&T.

S&F electric bell AC 230 Volt complete all as specified and directed . Make:-Anchor/Cona/Havells

SANJEEV ENTERPRISES