Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹8.5 CrAccepted-AOC KEEZHANTHATHAM THERKOOR NAGAL | ₹8.5 Cr | L1 | Accepted-AOC The L1 bid was accepted
at the 111th Tender
Award Committee held
on 10.12.2025 |
| 2 | L2₹8.7 CrRejected-AOC NO 102 2ND FLOOR SHEIK DAWOOD STREET ERODE 638 001 | ERODE | TAMIL NADU | 638001 | ₹8.7 Cr | L2 | Rejected-AOC The L2 bid was Rejected
at the 111th Tender
Award Committee held
on 10.12.2025 |
| 3 | L3₹8.9 CrRejected-AOC LIG 11 997 | ERODE | TAMIL NADU | 638001 | ₹8.9 Cr | L3 | Rejected-AOC The L3 bid was Rejected
at the 111th Tender
Award Committee held
on 10.12.2025 |
| Sl No | Description | Qty | Unit | SUSHMANITICONSTRUCTIONS L3 | sakthi constructions L2 | Selvamayandi L1 |
|---|---|---|---|---|---|---|
| 1.00 | Earthwork Open excavation for foundation in OS & HS and soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, bailing our water wherever necessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth with in compound in place shown by the departmental officers initial lead and fit and clearing and leveling the site etc complete | 4,044 | Cum | 116 ₹4.7 L | 96 ₹3.9 L | 93.35 ₹3.8 L |
| 2.00 | Earthwork excavation for foundation in OS & HS and soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, bailing our water wherever necessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth with in compound in place shown by the departmental officers initial lead and fit and clearing and leveling the site etc complete | 278 | Cum | 235 ₹65,330 | 215 ₹59,770 | 199.7 ₹55,516.60 |
| 3.00 | Cement concrete 1:5:10 (one cement, five sand and ten aggregate) using 40mm gauge hand broken granite stone jelly for foundation and basement etc. complete complying with standard specification | 362 | Cum | 4,620 ₹16.7 L | 4,600 ₹16.7 L | 4,515 ₹16.3 L |
| 4.00 | Supplying and filling in foundations, basement etc with filling conveyed earth in layers of not more than well rammed watered and consolidated etc., complete coplying with standard specification and as directed by the departmental officers. | 821 | Cum | 350 ₹2.9 L | 330 ₹2.7 L | 319.6 ₹2.6 L |
| 5.00 | Supplying and filling in foundations, basement etc with filling Stone dust in layers of not more than 15cm thick well rammed watered and consolidated etc., complete coplying with standard specification and as directed by the departmental officers. | 216 | Cum | 220 ₹47,520 | 200 ₹43,200 | 186.4 ₹40,262.40 |
| 6.00 | Supplying and filling in foundation and basement with gravel in layers of not more than 15cm thick well rammed watered and consolidated etc. | 32 | Cum | 300 ₹9,600 | 280 ₹8,960 | 261.4 ₹8,364.80 |
| 7.00 | Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers. | 1,246 | Sqm | 152 ₹1.9 L | 132 ₹1.6 L | 119.85 ₹1.5 L |
| 8.00 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. | 1,780 | Sqm | 885 ₹15.8 L | 865 ₹15.4 L | 856 ₹15.2 L |
| 9.00Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid) | ||||||
| 9.01 | For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc. | 4,067 | Sqm | 985 ₹40.1 L | 965 ₹39.2 L | 954 ₹38.8 L |
Tender Value
₹8.5 Cr
EMD Value
₹4.4 L
Closing Date
29 Jul 2025, 3:00 pmClosed
Assistant commissioner /Executive officer
Assistant commissioner /Executive officer Arulmigu thirucourtallanathaswamy temple courtallam
Construction of ADDITIONAL NEW 26 CLASS ROOMS FOR THE SRI PARASAKTHI VIDYALAYA CBSE SCHOOL in and allround the Sri Parasakthi College Campus belongs to SRI PARASAKTHI VIDYALAYA CBSE SCHOOL at Courtallam in Tenkasi District
2025_HRCE_585973_1
5-1/2025
Open Tender
Civil Works
540 days
Courtallam
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹4.4 L
10 Jun 2026
26 Jul 2025
30 Jul 2025
26 Jul 2025
29 Jul 2025
26 Jul 2025
Amount
Earthwork Open excavation for foundation in OS & HS and soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, bailing our water wherever necessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth with in compound in place shown by the departmental officers initial lead and fit and clearing and leveling the site etc complete
Earthwork excavation for foundation in OS & HS and soils and to full depth as may be directed except in hard rock requiring blasting inclusive of shoring shuttering, bailing our water wherever necessary refilling the foundation with excavated earth other than sandy soil in layers of not more than 150mm thick layers well rammed and depositing the surplus earth with in compound in place shown by the departmental officers initial lead and fit and clearing and leveling the site etc complete
Cement concrete 1:5:10 (one cement, five sand and ten aggregate) using 40mm gauge hand broken granite stone jelly for foundation and basement etc. complete complying with standard specification
Supplying and filling in foundations, basement etc with filling conveyed earth in layers of not more than well rammed watered and consolidated etc., complete coplying with standard specification and as directed by the departmental officers.
Supplying and filling in foundations, basement etc with filling Stone dust in layers of not more than 15cm thick well rammed watered and consolidated etc., complete coplying with standard specification and as directed by the departmental officers.
Supplying and filling in foundation and basement with gravel in layers of not more than 15cm thick well rammed watered and consolidated etc.
Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers.
Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc.
Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid)
For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.
For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.
For wall
Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part thereof but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.
Providing and laying in position, Standardised Concrete Mix M-25 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).
Foundation and basement
Ground floor
First floor
For Second floor
Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire)
Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.
Brick work in following Cement Mortar using best quality Fly ash bricks of size 23x11x7cm for foundation and basement including curing etc.,complete complying with standard specification.
Foundation & Basement
Ground floor
First floor
For Second Floor
Plastering with cement mortar 1:5 (one cement and five sand) 12mm thick etc complete complying with standard specification and as directed by the departmental officers.
Special ceiling plastering the RCC exposed surface such as RCC slab, sunshade, cauopy step smooth in CM 1:3 (one cement and three sand) 10mm thick etc
Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat
Painting the iron work two coats of best synthetic enamel paint of approved quality and colour over one coat of primer etc.complete
Brick partition walls of 11.50cm thickness using best quality Fly Ash Bricks of size 23 x 11 x 7 cm in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately)
Ground floor
First floor
Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.
Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three Crushed stone Sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers
Paving the floor with best quality Stain free Nano Polish Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Flooring with following ceramic tiles of size 305 x 305 x 6 mm laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone Sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)
Dadooing walls with following best approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the departmental officers.
Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).
Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings.....
Supplying and fixing position CI Nahani Trap / Floor Trap of the following sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sandand five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works)
Manufacturing supplying and fixing in position of teracotta jally 20x20x5cm thick approved quality and design in cement slurry including cost of materials labour curing lifting fixing in position etc, complete complying with standard specification and as directed by the departmental officers in all floors.
Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed
Providing expansion joint 12.5mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed
Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications and as directed.
Fabricating, Supplying and fixng in position of steel sheeted windows ( Three Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.
Fabricating, Supplying and fixng in position of steel sheeted windows ( Two Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.
Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround Teak ply 3mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .300x12mm aluminium tower bolt 2nos. 200x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 3 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.
Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.
Supply and fixing mild steel grills for windows, ventilator, gate, ladder etc including priming coat etc complete complying with standard specification and as directed by the departmental officers.
Fabrication, supply and fixing in position of 'N' type ventilators using M.S. angle of size 25 x 25 x5 mm for frame and M.S. Flat of size 20 x 3 mm for fixing the weld mesh and using 25 x 22 x3 mm 'T' section for frame glass. Special type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fxing the weldmesh 25mm square including cost of 3mm thick pinheaded glass panes for all panels and fixing the glass panels with necessary clips & putties with required bolts, nuts and washers and one coat of red oxide primer etc. including necessary dismantling, making holes in RCC columns, beams, masonry wherever necessary with power drill to the extend required and made good to the original conditions after fising as directed by the departmental officers.
Supplying and fixing PVC sliding door for Disabled persons toilet in with Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter including slidng arrangements.
FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers
Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.
Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)
Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks)
Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).
Drilling of borewell anywhere in Tamilnadu including transportation from one place to another place within Tamilnadu in alluvial soil or sedimentary strata of clayand sand or sand, stone, shale, pebbles, boulders etc., by first taking a pilot bore of 140 mm/150mm dia and then enlarging to required dia by direct or reverse rotatry mud and circulation method using Contractor's rig, fuel, labour, drilling, betonite mud and water required for drilling at the site shown by the TWAD Officers including construction of mud pit (only Calyx drills are to be used).
Supplying and inserting 150mm dia PVC Casing pipes [without slots] 6Kg/Sq.cm in the drilled hole including jointing the pipes with PVC couplers with cement paste etc., complete
Supplying, erecting and connection of 4.00 sqm Sub Cable having good quality with nylon coir etc., complete.
Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. For Below Ground Level
32mm CPVC Pipe
Supplying and fixing of 5.00 HP Submersible pump set Motor with 25 stage of approved quality confirming to ISI transporting charges to site, etc., complete.
Supply of Panel Board items consisting 3.00 HP to 5.00 HP DOL starter with 32 Amp main switches 1 No 32 Amp fuse carrier 2 Nos indicator lamp with switches 2 Nos etc., complete
Supplying and fixing of 150mm PVC Endcap for Borewell of approved quality confirming to ISI transporting charges to site, etc., complete.
Supplying and fixing Nylon Rope for Bore-well including all charges etc., complete complying with standard specification and as directed by the departmental officers
Supplying, laying and jointing CPVC pipes (having working pressure 10 kg. / sq.cm) of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing UPVC specials using CPVC adhesives (but excluding cost of such specials) and fixing into wall with teak wood plugs, CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. For Above Ground Level
32 mm dia CPVC Pipe
25 mm dia CPVC Pipe
20 mm dia CPVC Pipe
Supplying CPVC Specials (with working pressure 10 kg. / sq.cm.) in water supply arrangements (both in internal and external water supply arrangements
32mm dia CPVC Union
25mm dia CPVC Union
32 mm dia CPVC Elbow
25 mm dia CPVC Elbow
32mm dia CPVC Coupling
25mm dia CPVC Coupling
32 mm dia CPVC Tee
25 mm dia CPVC Tee
32x25mm dia CPVC Reducer
25x20mm dia CPVC Reducer
32x25mm dia CPVC Reducer Elbow
25x20mm dia CPVC Reducer Elbow
Supplying and fixing PVC Water Tank with cover of Ist quality suction and delivery etc., complete.
Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.
32 mm dia Gate valve
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete
Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing.The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete
Supplying and installation of Ceramic Steel chalk writing board with the following specification. The 2mm GI Sheet is placed with wall side over the GI sheet necessary adhesive is spreaded and fixed the 9mm MDF board on the GI sheet 0.40mm thick ceramic steel chalk board is provided over the MDF board and the whole arrangements are fixed to the frame using heavy anodized Aluminium section and Chromium plated provided in the corners. The whole arrangement are fixed to the wall using wooden plugs and screws etc., The rate includes all above materials, labour charges and taxes etc., complete complying with standard specification and as directed by the departmental officers.
Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories. (a) MS Skid - 1 No. (b) Media 11054 No. Vessel with 20 nb Multiport Valve (with Media Pubble and Fine Sand and Activated Carbon Filling) set (c) Feed Pump 0.50 HP – 1 No. (d) Vertical Pump 2-9, 2.00 HP / Single Phase – 1 No. (e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos. (f) Flow Meter - 1 No. 20” Filter with Housing - 1 No. Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings. The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact
Supplying and Fixing Incinerator for Ladies Bathroom including labour charges and taxes etc., complete complying with standard specification and as directed by the departmental officers.
Supply and fixing of stored pressure ABC (Mono Ammonium Phospate) Powder Type Fire Extinguisher of 6 kg. capacity as per IS 15683 with pressure gauge, discharge hose & control nozzie, wall mounting bracket, safety clip etc., ncluding conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition whererver found necessary etc complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT/ SAFETY FIRST ? EQUIVALENT.
Plastering with Cement Mortar 1:3 (One cement and Five sand), 12mm thick in all floors including curing etc. complete.
Plastering with Cement Mortar 1:3 (One cement and Five sand), 20mm thick in all floors including curing etc. complete.
Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete.
50mm thick precast slab
75mm thick slab
Supplying and fixing PVC ventilating shaft of 100mm dia with 3 metre height including cost of 100mm dia AC cylindrical cowl of best approved quality etc., complete.
Supplying and filling in foundation, basement, etc with filling Crushed stone sand in layers of not more than 15 cm thick without consolidation etc. complete.
Collection supplying and filling with graded IRC Metal of following size hard broken granite stone including stacking and filling etc., complete complying with standard specifications and as directed by the departmental officers. The rate includes cost of metal, labour charge for filling.
40mm dia IRC metal
20mm dia IRC metal
Supplying, laying and jointing glazed stoneware pipes of following dia of approved best quality with spigot and socket ends (in reverse direction) in dry condition and laid in loose joints (i.e.) without cement and spun yarn etc. complete.
Supplying and fixing in position 150mm dia stoneware tee of approved best quality and provding leak proof joints with cement, spun yarn, etc., including dismantling the brick work and re-doing the dismantled portion to the original condition etc. complete.
Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws etc. complete.
110mm dia PVC soil pipe
Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing etc. complete.
110mm dia PVC Door Bend
110mm dia PVC Plain Bend
110mm dia PVC cowl
Supplying and fixing best approved best quality Stainles steel Health Facet with Stop coak of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).
Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of second class Table Mould Bricks of size 9" x 43/8" x 23/4" with Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.
Supplying and filling in foundations, basement etc with filling 10-12mm Jelly in layers of not more than well rammed watered and consolidated etc., complete coplying with standard specification and as directed by the departmental officers
Supplying and laying of 83mm thick rubber mould high strength type of inter locking colour paver block of approved colour made up of designed concrete mix 1:1:2 using 10 to 12 mm size HBG stone jelly, in required shapes and size having minimum compressive strength of 40 N/mm2 to be laid in flurrying bone pattern with approved non sticking surface at top. The rate is inclusive of leveling the site, providing sand cushion 100mm thick, compacting with power compactor and sweeping the sand grouting and also inclusive of transportation charges, loading, unloading and labour charges for laying the paver block etc., complete complying with standard specification and as directed by the departmental officer.
Plain Cement concrete 1:2:4 (one cement, Two sand and Four aggregate) using 20mm gauge hand broken granite stone jelly for foundation and basement including dewatering if found necessary and laid of not more than 15cm thick and compacted. etc. complete complying with standard specification
Clearing Light Jungle
Supplying and fixing of RCC Well Ring of following thickness in RCC 1:2:4 (one cement, two sand and four aggregates), using 20mm HBGS jelly excluding cost of reinforcement steel in position etc., complete.
Providing Polymer Coating (Water Proof Coating) for sunken portion of toilet with following specification and the surface shall be cleaned to remove all dust, foregin, matters lose materials or any other deposits of contamination by rubbing with wire brush.Slurry: Dry blend and polymer liquid blend shall be mixed into the desired ratio as per recommendation of the supplier. The mix shall be stirred thoroughly until no bubbles remain in the mix. Any lumps found in mix shall be removed. Apply first coat of polymer modified cementitious slurry by brush on wet cleaned surface. After drying, second coat shall be applied on the first coat as directed by the departmental officers etc. The rate inclusive of cost of materials and labour, etc., complete.
Supplying and erecting of Starter with all accessories of approved quality and best variety of confirming to I.S.S specification and fixing of transportation and all incidental charges etc., completed and as directed.
Supplying and erecting of 1HP Mono block motar with all accessories of approved quality and best variety of confirming to I.S.S specification and fixing of transportation and all incidental charges etc., completed and as directed.
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (5 points / Coil) Higher End (SD-317)
Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) (6 points / Coil) Higher End (SD-319)
Wiring with 3 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A two way module switch with module front plate with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour for Concealed PVC pipe Stair case Light point Higher End (SD-319)
Supply and fixing of 4 ft 20W SBT fitting on wall (Data-1)
Supply and fixing of 9W LED bulb for BH point (Data - 2)
Supply and fixing of 375mm (15") sweep (light duty) AC exhaust fan complete with necessary wall opening and making of the wall (SD-116)
Supply and fixing of louvers shutters arrangements for 375mm (15") sweep light duty AC Exhaust fan (SD-121)
Supply and fixing of 1200mm (48") sweep AC ceiling fan complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod on the existing fan clamp (SD-577)
Supply and fixing of AC / DC gangebill 12" size suitable for 230 volts 50 c/s single phase AC supply on suitable TW board with push switch(Data 4)
Supply and fixing of 1 no.6A two module 5 pin socket , 1 no. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End (SD-464)
Supply and fixing of 1no 16A modular switch with plastic modular cover plate on suitable G.I modular box concealed with wall with connection (Data-3)
Supply and fixing of 3nos.6A two module socket , 1 no. 6/16A two module socket , 3 nos. 6A one module switch, 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End (SD-524)
Supply and fixing of 32A TP MCB Switch in suitable 4 pole sheet steel enclosure in flush with wall with earth connection (Data-7)
Supply and fixing of 8 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 32A DP MCB switch as incoming and 6 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only Higher End (SD-601)
Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no 32A 4P MCB switch as incoming and 18 nos 6A to 32A SP MCB as outgoing in flush with wall with earth connection only Higher End (Data-8)
Supply and fixing of 8 way vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no 63A 4Pole MCB switch as incoming and 6 nos 32A TP MCB switch and 6 nos 6A to 32A SP MCB as outgoing in flush with wall with earth connection only Higher End (Data-9)
Supply and fixing of 6 way Vertical Triple pole and neutral MCCB sheet steel enclosure distribution board ( with MCCB incomer) with double door (metal door) with 1 no. 160A 4P MCCB switch as incoming and 4 nos. 63A 3P MCB, 6 nos. 6A to 32A SP MCB as outgoing with suitable cable end box in flush with wall with earth connection only Higher End (SD-697)
Supply and fixing of 100 A Three phase 500V 4 Pole Change over Switch on suitable angle iron frame work with MS cable entry boxes with PWD earthing (SD-735)
Supply and fixing of 100A TNEB metering outdoor panel board with 16 SWG CRCA sheet steel enclosure accommodate TNEB 3 phase meter with connection (Data-11)
Supply and Run of 2 of 2.5 sq.mm. (36/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection by 2.5 sq.mm. PVC insulated SC unsheathed copper wire with painting of suitable colour (SD-427)
Supply and Run of 2 of 4 sq.mm. (56/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 2.5 sq.mm PVC insulated SC unsheathed copper wire and making good of the concealed portion with suitable colour (SD-444)
Supply and Run of 4 of 10 sq.mm. (140/0.3) PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVCbinsulated SC unsheathed copper wire with painting of suitable colour (SD-430)
Supply and Run of 4 of 16 sq.mm PVC insulated SC unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVCbinsulated SC unsheathed copper wire with painting of suitable colour (Data-12)
Supply and fixing of 65mm (2.5") dia G.I pipe (class B) of 6mts length with 300mm x 300mm x 6mm MS plate duly welded at the bottom with cone roofing and construction of masonary pedestal and fixing of PVC synthetic fibre box of 8 nos (8" x 6") to house 6A SP MCB (Legrand make)control switch with 1 no 48W LED (Philips make) complete on the GI post with 1.5Sqmm PVC unshealted copper leads with painting of suitable colour (Data - 13)
Supplying and laying of 4 x 16 Sqmm PVC armoured LTUG cable through HDPE pipe in a trench to be excavated at a depth of 0.75mt putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good (Data - 14)
Supplying and clamping of 4 x 16 Sqmm PVC LTUG armoured cable through HDPE Pipe an post or on wall with MS clamps (Data - 15)
Supply and fixing of brass cable gland for 4 x 16 sq.mm. PVC LTUG aluminium armoured cable with earth connection(SD-185)
Supplying and laying of 31/2 x 35 Sqmm PVC armoured LTUG cable through HDPE pipe in a trench to be excavated at a depth of 0.75mt putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good (Data - 16)
Supplying and clamping of 31/2 x 35 Sqmm PVC LTUG armoured cable through HDPE Pipe an post or on wall with MS clamps (Data - 17)
Supply and fixing of brass cable gland for 31/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with earth connection(SD-187)
Supplying and laying of 31/2 x 50 Sqmm PVC armoured LTUG cable through HDPE pipe in a trench to be excavated at a depth of 0.75mt putting 0.15mt layer of sand and covering the three sides of the cable with bricks and refilling the earth to make good (Data - 18)
Supplying and clamping of 31/2 x 50 Sqmm PVC LTUG armoured cable through HDPE Pipe an post or on wall with MS clamps (Data - 19)
Supply and fixing of brass cable gland for 31/2 x 50 sq.mm. PVC LTUG aluminium armoured cable with earth connection(SD-188)
Supply and run of 1 of No.8 SWG copper conductor on suitable PVC rigid pipe on wall with painting of suitable colour for earth connection (Data -20)
Earthing as per the ISI specification with an earth electrode of 2.10 metre Class 'B' GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry(SD 233)
sakthi constructions (BID ID -1415061)
SUSHMANITICONSTRUCTIONS (BID ID -1414963)
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
BOQ.xls
BOQ • 0.41 MB
Tenderdocument.pdf
Tender Documents • 1.41 MB
Tenderdocument_2.pdf
Tender Documents • 1.06 MB
Tenderdocument_3.pdf
Tender Documents • 3.01 MB
Download all tender documents and submit your bid