Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
28 Sept 2026, 2:30 pm4d left
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
71
4 conditions · 1 needing a document upload
SUPPLY AS PER SPECIFICATION
FIRMS HAS TO CLEARLY MENTION THE MAKE / BRAND IN THEIR BID FAILING WHICH THEIR OFFER WILL NOT BE CONSIDERED.
RAILWAY RESERVES THE RIGHT TO IGNORE OFFERS RECEIVED FOR BRANDS OTHER THAN TENDERED
TENDERERS TO UPLOAD TENDER SPECIFIC AUTHORISATION / AUTHORISED DEALERSHIP CERTIFICATE FOR THE PRODUCT OFFERED FAILING WHICH RAILLWAY RESERVES THE RIGHT TO PASS OVER THEIR OFFER.
32 conditions
1. The bidder confirms that Rates and other financial terms quoted in relevant columns of financial bid will only be ruling terms for acceptance , and such terms quoted anywhere else should be ignored. [Denial of this condition not recommended] 2. I/We hereby agrees to supply the offered goods at the quoted price as per IRS conditions of contract and other terms and conditions specified in this tender. 3. Have you quoted the price on the basis of free delivery to destination , indicating break up 4. Have you mentioned HSN code as per GST Act 2017.
FREE AT DESTINATION
Please enter the percentage of local content in the material being offered.Please enter 0 for fully imported items, and 100 for fully indigenous items.The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 condition
I/We hereby certify that no other sister concerns or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concerns including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage.
2 locations across Tamil Nadu · 10,500 Numbers · 10,500 Set total
FULLY THREADED HEX HEAD BOLT,stainless steel hex head screw and Set of stainless steel hex head screw
71265331~SR
71265331
Open - Indigenous
Goods
Tamil Nadu
₹0
Exempted
28 Sept 2026
13 Aug 2026
6 items · 10,500 Numbers · 10,500 Set total
FULLY THREADED HEX HEAD BOLT & NUT OF SIZE M8 X 45 MM CONFIRMING TO THE FOLLOW ING SPECIFICATION: DIN 933, MATERIAL AISI-304, PROPERTY CLASS: A2-70 (WITH SUITABLE NUT). NOTE: 1) MAKE: Raaj/D BACHUBHAI/ ALFRED/TN Eng/SHIV Shakti/Unique Industrial Corp/TVS/KGWL/UNBRAKO /DFL/A PL/KUN/BM/ BNF/CSE/PFL/VIF ONLY. 2) FIRM SHOULD SUBMIT AUTHORISED DEALERSHIP CERTIFICATE FROM MANUFACTURER ALONG WITH TENDER ITSELF OTHERWISE OFFER WILL NOT BE CONSIDERED. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELS/AJJ, SR | Tamil Nadu | 3500.00 Numbers |
| Total | 3,500 Numbers | |
Set of stainless steel hex head screw with nut consisting of 02 items. (i) Stainless steel hex h ead screw M8 X 70 mm long as per IS 1364 Pt. II-1992, A2-70 to IS-1367 (Pt.-14) 1984 CE, Qty/set= 01 no. ( II) Stainless Steel torque type hexagon nut M8 to IS-7002-1991, A2-70 to IS- 1367 (Pt.14) 1984 CE, Qty/set = 01 no. NOTE: 1) MAKE: Raaj/D BACHUBHAI/ ALFRED/TN Eng/SHIV Shakti/Unique Industrial Corp/TVS/KGW L/UNBRAKO /DFL/APL/KUN/BM/ BNF/CSE/PFL/VIF ONLY. 2) FIRM SHOULD SUBMIT AUTHORISED DEALERSHIP CERTIFICATE FROM MANUFACTURER ALONG WITH TENDER ITSELF OTHERWISE OFFER WILL NOT BE CONSID ERED. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELS/AJJ, SR | Tamil Nadu | 3500.00 Set |
| Total | 3,500 Set | |
Stainless steel hex head bolt full threaded with flat washer, size M8X15mm, property class A 2-70. NOTE: 1) MAKE: Raaj/D BACHUBHAI/ ALFRED/TN Eng/SHIV Shakti/Unique Industrial Corp/TVS/KGWL/U NBRAKO /DFL/APL/KUN/BM/ BNF/CSE/PFL/VIF ONLY. 2) FIRM SHOULD SUBMIT AUTHORISED DEALERSHIP CER TIFICATE FROM MANUFACTURER ALONG WITH TENDER ITSELF OTHERWISE OFFER WILL NOT BE CONSIDERE D. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELS/AJJ, SR | Tamil Nadu | 3500.00 Numbers |
| Total | 3,500 Numbers | |
HEX HEAD SCREW M6X60 STAINLESS STEEL as per IS:1364(PART-2)-2018, A2-70 TO IS:1367( PART-14, SEC-1)-2023. NOTE: 1) MAKE: Raaj/D BACHUBHAI/ ALFRED/TN Eng/SHIV Shakti/Unique Industrial C orp/TVS/KGWL/UNBRAKO /DFL/APL/KUN/BM/ BNF/CSE/PFL/VIF ONLY. 2) FIRM SHOULD SUBMIT AUTHORISED DEALERSHIP CERTIFICATE FROM MANUFACTURER ALONG WITH TENDER ITSELF OTHERWISE OFFER WILL N OT BE CONSIDERED. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELS/AJJ, SR | Tamil Nadu | 3500.00 Numbers |
| Total | 3,500 Numbers | |
Set of Hexagonal Head Stainless Steel bolt fully threaded M10x35mm with 02 No.s of Flat Wa shers, 01 No. of Spring Washer and 01 no. of Nut to IS:1367 PART-14, Grade A2-70. NOTE: 1) MAKE: Raaj/D BACHUBHAI/ ALFRED/TN Eng/SHIV Shakti/Unique Industrial Corp/TVS/KGWL/UNBRAKO /DFL/APL/KUN/BM/ B NF/CSE/PFL/VIF ONLY. 2) FIRM SHOULD SUBMIT AUTHORISED DEALERSHIP CERTIFICATE FROM MANUFACTU RER ALONG WITH TENDER ITSELF OTHERWISE OFFER WILL NOT BE CONSIDERED. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELS/AJJ, SR | Tamil Nadu | 3500.00 Set |
| Total | 3,500 Set | |
SET OF (I) STAINLESS STEEL HEX HEAD BOLT M8 X 35 (A2-70 TO IS 1367 PT. 14-84), (II) STAI NLESS STEEL HEX NUT M8 (A2-70 TO IS 1367 PT-14) (III) STAINLESS STEEL PLAIN WASHER AS PER IS 2016 TABLE 2 TYPE A (A2 TO IS 1367 PT-14)( IV) STAINLESS STEEL SPRING WASHER AS PER IS 3063 TABLE 1 A T YPE B (A2 TO IS 1367 PT-14. Note: One set consists of 04 items with 01 No quantity Each. NOTE: 1) MAKE: R aaj/D BACHUBHAI/ ALFRED/TN Eng/SHIV Shakti/Unique Industrial Corp/TVS/KGWL/UNBRAKO /DFL/APL/KUN/B M/ BNF/CSE/PFL/VIF ONLY. 2) FIRM SHOULD SUBMIT AUTHORISED DEALERSHIP CERTIFICATE FROM MANUFA CTURER ALONG WITH TENDER ITSELF OTHERWISE OFFER WILL NOT BE CONSIDERED. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitted: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/ELS/AJJ, SR | Tamil Nadu | 3500.00 Set |
| Total | 3,500 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .