GE H-39 2021-2022 REPAIR TO PLASTERING PERIODICAL SERVICES INCLUDING MAINTENANCE OF MISC BR ITEMS IN ARMY HOSPITAL PUBLIC SCHOOL BLDG No. P101 UNDER GE EM RRH DELHI CANTT 110010

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed by Engr-in-Charge.

Taking down chowkhat or frames with shutter (without taking off shutter from frame) area exc 1.50 Sqm but n .exc 4.00 sqm each and removal from site complete all as specified and directed by Engr-in-Charge.

All as per item here-in-before but n. exc. 1.50 sqm each

Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed by Engr-in-Charge.

Dismantle wrought iron or MS work of any description and in any position complete all as specified and directed by Engr-in-Charge.

Demolition of unreinforced cement concrete in paving n.exc 15cm thickness (Below or above ground level) and removing rubbish of bldgs premises in a near by low laying area to a distance n.exc 500m etc, complete all as specified and directed by Engr-in-Charge.

M&L for 25mm thiick cement concrete type B-1, 1:2:4 (20mm aggregate as in sub-base to flooring complete all as specified and directed by Engr-in-Charge.

M&L for 50mm thiick cement concrete type D-2 1:4:8 (40mm aggregate as in sub-base to flooring complete all as specified and directed by Engr-in-Charge.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 15mm thick screed bed in CM1:6 with grey cement and pigment complete all as specified and directed by Engr-in-Charge.

S&F Factory made precast heavy duty drain/ manhole covers including MS frame and including reinforcement as per IS 12592 : 2002 with specified thickness complete all as specified and directed by Engr-in-Charge.

M & L for non-skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. over 15mm thick screed bed in CM 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.

M&L for glazed ceramic colour tiles in vertical surface of size 450 X 300 x 7 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over 10mm thick rendering as backing coat in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for Virified Ceramic coloured tiles dark shade 10 mm thick (square/ rectangular) polished, area of each tiles exc. 0.36 sqm, but n. exc. 0.42 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed by Engr-in-Charge.

S&F, aluminium anodized chowkhats of 100x44x1.5mm section with rebate complete frame complete all as specified and directed by Engr-in-Charge.

M&L 4.8 mm thick tinted glass including necessary clips, rubber packing & aluminium beading (aluminium frame ) complete all as specified and directed by Engr-in-Charge.

Supply fabricating and fixing in repair of aluminium door powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/tinted sheet glass of Modi guard/Atul or prelaminated particle board 9 to 10mm thick of make Kit Ply with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each) and two aluminium tower bolts of 200mm size for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces all as specified and as directed by Engineer-in-Charge at site. (Cost of sheet glass Plain/frosted/particle board shall be measured and paid seprately ) complete all as specified and directed by Engr-in-Charge.

S&F in repair of ROLLER blinds vertical type 100mm wide slats made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed by Engr-in-Charge.

S&F in repair of venatian blinds vertical type 100mm wide slats made out of fabric cloth of approved shade fixed as per the instructions of manufacturers, complete all as specified and directed by Engr-in-Charge.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.

S&F 105X60 Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engr-in-Charge.

M&L for 40mm thk flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Engr-in-Charge.

S/F Solid PVC door frames of size 50 mmX 47 mm,made out of 5 mm thick plain colour PVC sheets reinforced with MS squre tubes complete all as specified and directed by Engr-in-Charge.

S&F for factory made solid PVC Moulded door shutter, 28 to 30mm thick (stile) with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face fixing in frame at site as per specification complete all as specified and directed by Engr-in-Charge.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed by Engr-in-Charge.

S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium complete alloy complete all as specified and directed by Engr-in-Charge.

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed by Engr-in-Charge.

S&F 125mm size aluminiuma alloy handles,cast type,anodised complete all as specified and directed by Engr-in-Charge.

S&F in repairs 140mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.type,anodised complete all as specified and directed by Engr-in-Charge..

M&L for preparation of old painted wooden surfaces and applying 1 coat of synthetic enameled paint over 10 cm width or girth including preparation of new surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer over 10 cm width or girth including preparation of new surfaces complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new or previously untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described , applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old steel surfaces of any description, over 10cm in width or girth,not otherwise described , applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles built in cement mortar complete all as specified and directed by Engr-in-Charge.

M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan exc. 6m mean radius built in CM 1:6 complete all as specified and directed by Engr-in-Charge.

M&L Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&L for rendering 15 mm thick in CM (1:6) on fair faces of walls of brick work or concrete surfaces surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L complete removal of existing treatment of external wall surfaces by steel wire brushing, scraping down smoke soots, moulds, moss and efflorescent salts over all decorated plastered or un plastered surfaces of walls and finishing walls with two coats of Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by Engr-in-Charge.

All as per item here-in-before but on newly plastered surfaces of wall with preparation

M&L for preparation of new plastered wall surfaces and applying two coat of oil emulsion distemper on wall over a coat of 1.5mm wall care putty complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old distempered wall surfces by washing, rubbing down and stopping of distempered and painted surfaces and applying two coats of distemper oil emulsion on walls over 3mm thick putty complete all as specified and directed by Engr-in-Charge.

All as per item here-in-before but on ceiling surfces

M&L for preparation of old plastered surfaces of walls and applying 2 coats of cement base paint over a coat of weather proof alkali resistant primer on walls complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick ready mix plaster on brick or concrete surfaces of walls (external walls) finished even and smooth complete all as specified and as directed by Engr-in-Charge.

S&F in repair of figured glass, pinheaded type in squares n.exc 0.5 sqm each panes 4.0 mm thick, as in aluminum window/Ventilator/door, including rubber packing and aluminium beading complete all as specified and directed by Engr-in-Charge.

M&L in repair 8mm thick multi layer coloured polycarbonate plastic transulacent sheeting fixing with aluminium strip and gasket and self taping screws on roof trusses complete all as specified and directed by Engr-in-Charge.

M&L for guniting of spalled / corroded reinforced cement concrete surface, on vertical or overhead position, comprise of chipping of spalled and loose concrete; cleaning rust from reinforcement by sand blasting; scrubbing down concrete surface with wire brushes; cleaning with water; allowed to dry and applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited; applying two layers of guniting over steel welded wire mush having 4 mm dia of wire and aperture 75 mm, total thickness of gunite not exc 25 mm thick (average thickness) in cement mortar 1:2 using OPC 53 grade cement duly mixed with polycrete admixture @ 2% by weight of cement or as per manufactures instruction and finally applying cement plaster over gunite surface of required thickness to give even uniform & smooth finish conforming to proper geometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, fascias, parapets, lintels, columns and beams etc with and incl necessary scaffolding, shuttering, chases to brick work or RCC members etc,complete all as specified and directed by Engr-in-Charge.

S&F 4.8mm thk sheet glass ordinary quality and glazing with oil putty in square n. exc. 0.5 sqm in each pane including hacking down from from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed by Engr-in-Charge.

All as per item here-in-before but exc. 0.5mm sqm

Dismantling water tanks of capacity exc. 250 ltrs but n. exxc. 500 ltrs complete all as specified and directed by Engr-in-Charge.

All as per item here-in-before but exc, 1000 ltrs but n. exc. 2000 ltrs

All as per item here-in-before but 5000 ltrs

S&F 500 liters capacity rotational moulded polythene water storage tank (cylindrical vertical with close top) hoisted and fixed in position including dismantaling of water tanks and all connection complete all as specified and directed by Engr-in-Charge.

All as per item here-in-before but 2000 ltrs

All as per item here-in-before but 5000 ltrs

Disconnecting existing tanks, of any type setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position including cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of capacity exc. 250 ltrs but n. exc. 500 ltrs complete all as specified and directed by Engr-in-Charge.

All as per item here-in-before but capacity exc. 500 ltrs but n. exc. 1000 ltrs.

Taking up or down steel water tubing 20mm bore of pipe including all fittings complete all as specified and directed by Engr-in-Charge.

S & F 20mm bore GI tubing medium grade with all fittings and fixed complete walls and ceilings or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F 20mm ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball complete screwed for iron pipe and fixed 20mm bore of pipe complete all as specified and directed by Engr-in-Charge.

S/F stop valves/angles cast copper alloy, screwed down, high pressuure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed 15 mm bore long Shank and cup (Concealed type) fancy type with CP all as Specified in repairs complete all as specified and directed by Engr-in-Charge.

S&F pillar taps fancy type cast copper alloy, with capstan heads,chromium plated screwed down high pressure,with or without lettered' Hot' or Cold ' with long screwed shanks and fly-nuts for iron pipe and fixed in repairs complete all as specified and directed by Engr-in-Charge.

S&F PVC valveless, syphonic action type (10 Ltr) flushing cistern low level white with intel ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor in repairs complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 450 x 15mm dia PTMT (PVC) complete all as specified and directed by Engr-in-Charge.

S/F bib taps cast copper alloy with crutch or butter fly handles, screwed down, screwed for iron pipe or brass ferrule and fixed 15 mm bore CP complete all as specified and directed by Engr-in-Charge.

S&F brass CP Tubular towel rail, 20mm dia ,D type, 60 cm long between flanges fixed in repairs complete all as specified and directed by Engr-in-Charge.

M/L 18- 20 mm thick granite of any type work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including screed bed in CM 1:6 for laying granite stone complete all as specified and directed by Engr-in-Charge.

S/F in repairs fancy type curtain rod incls brackets as approved by Engr - in - charge

S&F in repairs 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including taking down old pvc pipe and all connection ie bends, tee equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F PVC 110mm (SWR) bends, elbow with oval access door complete all as specified and directed by Engr-in-Charge.

S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including taking down old pvc pipe and all connection ie bends, tee equal or unequal complete all as specified and directed by Engr-in-Charge.

S&F PVC 75mm (SWR) bends, elbow with oval access door complete all as specified and directed by Engr-in-Charge.

S&F for vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) in repair complete all as specified and directed by Engr-in-Charge.

M&L vitreous china water closet Padestal pattern white fixed in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repairs seat covers any colour for pedestal pan with hinges complete all as specified and directed by Engr-in-Charge.

S&F Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC waste pipe 32mm dia complete for WHB/ urinals complete all as specified and directed by Engr-in-Charge.

S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) incl PTMT waste fittings 32mm dia fixed in repairs complete all as specified and directed by Engr-in-Charge.

S&F wash hand basins vitreous china flat back 550x400mm size white, first quality, with and including CP waste grating 32mm size, PVC waste pipe 25mm bore heavy duty, chain and plug and porcelain stopper , brackets of MS angle 35x35x6mm size complete all as specified and directed by the Engineer in Charge .

S&F 32mm dia waste fittings in repairs, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping, screws complete all as specified and directed by Engr-in-Charge.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed by Engr-in-Charge.

M&L for removing vegetation/plants on wall, roof, sunshade and junctions of over head tanks, pipes, etc of the building up to G+5 filled the hole floor height up rooting to any depth and filling the hole by nominal mix concrete (1:2:4) type B-0 with water proofing compound @3% by weight of cement and match the treated surface with proper safetyu arrangements to existing finished surface complete all as specified and as directed by Engr-in-Charge.

M&L Wire brushing and cleaning top surface of tiles, lime terracing or cement concrete, including flashings and junction of parapets, etc., and surface painting, with a layer of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq. m, blinded with grit or pea size gravel @ 0.006 cu.m per sq.m, and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:3:6 typeC1 using 20 mm graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old painted cement concrete or plastered surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

M&L prepolished coloured chequred cement concrete tiles 300X300X25 mm size set in screed bed 20 mm thick in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge.

M&L complete removal of existing treatment and applying Water proofing treatment as under:- (A) Applying a coat of approved bituminious primer @0.20 Kg/Sqm and applying a coat of hot blown bitumen 85/25 @1.20 Kg/Sqm. (B):- applying APP Polymer modified membrane 3.00 mm thick and not less than3.50 Kg /Sqm with side end lap by torch application method as specefied.(C):-Applying one coats of solar reflective bituminious aluminium paint @0.15 kg/sqm over the memberane complete all as specified and directed by Engr-in-Charge.

Supply fabricating and fixing in repair of aluminium door powder coated of extrusion aluminium section, Vertical style of door shutter of size 85mmx44.45mmx1.8mm thick. Top, middle and bottom rail of size 85mmx44.45x1.8mm thick and fixing 5 mm thick plain/tinted sheet glass of Modi guard/Atul or prelaminated particle board 9 to 10mm thick of make Kit Ply with aluminium beading and rubber gasket/beading as directed One mortice lock for aluminium door (each) and two aluminium tower bolts of 200mm size for each door fixed with rawl plug including rectification of floor/wall to match the existing surfaces complete all as specified and directed by Engr-in-Charge. (Cost of sheet glass Plain/frosted/particle board shall be measured and paid seprately )

M&L powder coated aluminium anodised three track sliding windows of frame size 92mm X 31.75mm X 1.5mm thick(JINDAL Cat. Section No 20831) and of shutter size 40mm X18mm (with 9.00mm interlocking legs)X1.45mm thick (JINDAL Cat. Section No 20737) section (two shutter glazed, covering half of span of opening each & one shutter skeleton covering half of span of opening) incl provision for making windows air tight, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.4mm and fixed with steel wire staples and 5mm thick plain glass including necessary fitting/fixtures/aluminium snap beads complete all as specified and directed by Engr-in-Charge.

S&F aluminium powder coated grill (DECO grill DG 103 Of 10mm thick of M/s ELESAR, M/s Royal Grill, M/s Natinal Grill Associated profiles & Aluminium Ltd) fixed with suitable 'F' section (No 8584) 15.30 X 23.40 X 1.40mm (minimum), fabricated and riveted to aluminium window / ventilators complete all as specified and directed by Engr-in-Charge.

sony engineering works

amtoindia

Shivam Firetech Engineers

friends associeates

ACR ENTERPRISES