REPAIR MAINT OF DAY TO DAY COMPLAINTS AND OTHER CONNECTED EM ITEMS AND REPAIR REPLACEMENT OF INTERNAL WIRING INCL FITTING FIXTURES AT OTM ACCN UNDER AGE EM OF GE NAGROTA

Amount

SCHEDULE ‘A’ PART-I Identifying and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective switch/socket/ceiling rose/holders/fittings / fixtures any type, rectification of faulty electric circuits, tightening of loose connections, replacment of old u/s wiring/conduits/casing caping & connections etc. complete all as directed.

Identifying and rectifying the defects pertaining to internal electrification of any type and nature such as taking down defective MCBs / MCB DBs/TPN/ TPN DBs any type, rectification of faulty electric circuits, tightening of loose connections, replacment of old u/s wiring/conduits/casing caping & connections etc. complete all as directed. NOTE FOR ITEM NO 1 to 2 :- (a) All T & P/Stationeries and labour team required comprising of Nos of trained electricians & helpers will be provided by the contractor daily, as directed. (b) Rep of the contractor will present in complaint cell & responsible for receiving & attending the complaints from 08.30 Hrs to 04.30 Hrs the time of lodging the complaint. In absence of rep of Contractor penal recovery as decided by GE shall be imposed & on contractor. (c) Cost of minor stores such as screws,clamps,insulation tapes,nuts/bolts, nail of required size etc shall be deemed included in the above quoted item. However, major items such as switches, sockets, bell push, fan regulator etc shall be measured and paid separately under appropriate items of Schedule 'A'. (d) Complaints where complete replacement of circuit/point wiring required shall be measured under relevent item. (e) If contractor fails to rectify the complaint with in 24 hours after reciving, Rs 500/- per complaint will be penalised.

Supply in replacement, switch piano flush type 5 Amps single pole one way complete all as specified and directed.

Supply in replacement, socket out let multipurpose suitable for 2/3 pin 5 amp flush type complete all as specified and directed.

Supply in replacement, switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

Supply in replacement, switch socket combination 2 in 1 5 pin 15 Amps flush type complete all as specified and directed.

Supply in replacement Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body surface type 65mm x 50mm 2 to 3 terminal complete all as specified and directed.

Supply in replacement, stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd (300 Watt , 230 Volts, 50 Hz AC Supply) complete all as specified and directed.

Supply in replacement, Batten/angle type holder insulated body with back plate complete all as directed.

Supply in replacement, bell push piano type 5 Amps complete all as specified and directed.

Supply in replacement, electric bell buzzer ding dong 230 volt AC complete all as specified and directed.

Supply in replacement, white / warm / cool white PVC LED fitting 1x18 watt complete with all accessories 230V 50 Hz complete as specified and directed.Make Havells cat part no LHEXAXPNIN1W020 or equivalent make as specified in PS.

Supply in replacement, 1 x 18 Watt tube rod 230V 50 Hz complete as specified and directed.

Supply in replacement, baton LED of 5W, 230V frequency 50/60 Hz integral sleek extruded polycarbonate LED channel with white acrylic cover, Power Factor not less then 0.9 as complete as specified and directed Cat Part No HLPT51505PCGWW or equivalent make as specifed in PS.

Supply in replacement, white/warm/cool white powder coated CRCA housing with LEDs 36W, 230 V, 50 Hz recess mounting LED 2 feet x 2 feet luminaries, Swamless front frame with flat white hight transmission acrylic cover complete with all accessories including connecting up with twin core twisted flexible copper conductor cable with suitable complete as specified and directed.

S&F decorative wall mounted luminaire in white / warm / cool white with & including 9 Watt LED lamp complete all as specified and directed Make Cat No of LHFHCHE1TL1W020 of Havells or equivalent make as specified in PS.

S&F decorative wall mounted luminaire white / warm / cool white with & including 9 Watt LED lamp complete complete as specified and directed.

S &F LED sleek white / warm / cool white surface round ceiling mounted decorative down light fitting with PC cover suitable for 1x15/18 watt complete all as specified and directed.

S & F of Decorative stylish adjustable Wall spot or focus light (Metal body) of 1 x 15 watt 230 Volt in white/warm / cool white all as specified and directed Make HPL Cat Part No HLPTRACK20(WW) or equivalent make as specified in PS.

Supply in replacement LED bulb white / warm / cool white 9/10 watt complete all as specified and directed. .

Supply in replacement, modular switch piano flush type, 6 amps, 230V AC,single pole, one way, complete all as specified and directed.

Supply in replacement, modular switch piano flush type, 16 amps, 230V AC,single pole, one way, complete all as specified and directed.

Supply in replacement, modular socket out let with shutter multipurpose suitable for 2 pin and 3 pin 6 amp flush type, complete as specified and directed.

Supply in replacement, modular socket out let with shutter multipurpose suitable for 6 pin 16 amp, flush type complete all as specified and directed.

Supply in replacement, modular bell alongwith swith,6Amp, 220 V, single pole complete all as specified and directed.

Supply in replacement, Electronic modular step fan regulator ,Two module, electronic,step type and connection complete,all as directed by Engr-in-charge.

Supply in replacement, MCB SPN 32/40 Amps 10 KA 230 volts "C" series complete complete as specified and directed.

Supply in replacement, MCB single pole 6 to 32 Amps 10 KA 230 volts "C" series complete

Supply in replacement, MCB single pole 40/63 Amps 10 KA 230 volts "C" series complete all as specified and directed.

Supply in replacement, MCCB 4 pole 125 Amps 25 KA 230 volts "C" series complete all as specified and directed.

Supply in replacement, MCB TPN 63 Amps 16 KA 230 volts "C" series complete all as specified and directed.

S&F MCCB 100A 4Pole 16KA 415 Volt with fixed magnetic and fixed thermal setting complete all as specified and directed.

Taking down carefully unserviceable aluminium point wiring (light, fan, socket bell or power) complete, (fittings such as switches, ceiling rose lamp holder, regulators, sockets, pendants) stacking at site and keeping in safe custody for taking credit, complete, all as specified.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including PVC casing caping ISI marked not less than 20mm wide on wall /ceiling with all fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2 mm thick covered with 3 mm thick bakelite laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly for One light point / fan point / bell point controlled by one switch 5 Amp complete all as specified and directed.

All As per Srl item N0 34 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .

All as per item No 34 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20 mm dia medium grade ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2 mm thick covered with 3 mm thick bakelite laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly for One light point / fan point / bell point controlled by one switch 5 Amp complete all as specified and directed. .

All As per Srl item N0 37 above but for one socket out let 5 Amp controlled by one switch on same board with other switch .

All As per Srl item N0 37 above for one socket out let 5 Amp controlled by one switch on independent board with other switch .

All as per item No 37 above but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independat board.

All as per item No 37 above but point wiring with 4 sqmm FRLS multi stranded copper conductor cable for main circuit and 4 sqmm cable as earth continuity conductor for controlled by two pin and earth plug and socket

S & F Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified.

S & F Modular Bell push ,SP 5/6 A suitable for 1 Module complete all as specified.

S & F Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified.

S & F Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified

S & F Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified.

S & F Modular Fan step Regulator electronic, 120 watts 2 Module complete all as specified.

S & F Modular base boxes & powder coated Modular sheet metal concealed box for 6 module complete all as specified.

All as per Item No-48 above but 3 module complete all as specified.

All as per Item No-48 above but 2 module complete all as specified.

All as per Item No-48 above but 8 module complete all as specified.

All as per Item No-48 above but 12 module complete all as specified.

S & F Modular blanking plates 1 module complete all as specified.

S & F Modular white cover plate with frame 6 module complete all as specified.

S & F Modular white cover plate with frame 3 module complete all as specified.

S & F Modular white cover plate with frame 2 module complete all as specified.

S & F Modular white cover plate with frame 8 module complete all as specified.

S & F Modular white cover plate with frame 12 module complete all as specified.

Supply & fixing heavy duty PVC Exhaust fan 250/300 mm sweep single phase AC 230/240V complete with louvers. complete all as specified.

M&L for flame proof point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid FRLS PVC insulated medium grade stove enameled black, rigid steel conduit of size not less than 20 mm dia ,fixed on wall/ surface on ceiling with all conduit fittings &and including 1.5 sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified and directed

Supply and fixing LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size. complete all as specified and directed.

Switch flame proof rotary type with termination box in LM6, 16A, single pole 250V complete all as specified and directed.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp complete all as specified and directed.

S&F Single pole mcb with a two pin and earth plug and socket complete with one single pole MCB 32 amp 240V complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 12 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs. complete all as specified and directed.

S&F sheet metal enclosure distribution board SPN 4 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete incl taking out existing UNSV DB with MCBs. complete all as specified and directed.

S&F sheet metal enclosure distribution board TPN 16 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete all as specified and directed.

S&F sheet metal enclosure double door for distribution board factory made for MCB DB load link TPN 6 way including suitable sizeof MCCB 125 Amp as incomer, 125 Amp, 4 pole. (when MCB's are to be used) with suitable size of busbar complete,fixed flush in wall including chases wall for fixing DB and making good the distributed wall surfaces to match with existing specification including taking down complete all as specified and directed.

M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 4 sq mm as earth continuity conductor connected to commen earth and earth dolly complete all as specified and directed.

M&L in replacement of sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked minimum 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 6 sq mm as earth continuity conductor connected to commen earth and earth dolly complete all as specified and directed.

M&L for sub main wiring with two single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sq mm drawing through and including concealed rigid non metallic PVC conduit medium grade ISI marked 20 mm dia including one single core FRLS PVC insulated unsheathed 1100 volts grade cable with stranded copper conductor of size 10 sq mm as earth continuity conductor connected to commen earth and earth dolly complete all as specified and directed.

S&F building security light luminaries energy saving and envirnment friendly long life LED light of 25W made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP66 protection and Impact resistanve of IK07, including MS Bracket light grade 25 mm dia, 1.2 m long bend in shape fixed on wall having an angle 120 degree, fixed with and suitable size nuts, bolts and washers etc including taking down of existing light fitting and complete all as specified and directed.

Disconnecting & Taking down unserviceable ceiling fan 1400/1200 mm sweep 230 v, AC supply, single phase from position for winding and refixing for the same after winding, necessary connection comple all as specified and directed . Note winding and including repairs measured separately.

All as per item No 74 above but exhaust fan of size 450/380/300 /255mm sweep

All as per item No 78 here-in-before but wall mounted fan size 450/400 mm sweep

M&L for collecting unserviceable ceiling fans 1200mm sweep 230 v, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the ceiling fan and taking out complete burnt winding from fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling , greesing & painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface of the fan with and including replacement of rusted /unserviceable nuts, bolts split pin rubber reel , machine screws, shaft etc including replacement of defective / unserviceable parts / spares as required reassembling the fan and testing complete deposinging the complete repaired fan to E/M store yard of GE Nagrota including transportation complete all as specified and derected.

All as per item No 77 here-in-before but ceiling fan of size 1400 mm sweep complete all as specified and directed.

M&L for collecting unserviceable exhaust fan 450mm sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the exhaust fan and taking out complete burnt winding from exhaust fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface replacement of rubber pads and depositing the exhaust fan to E/M store yard GE Nagrota including transportation and testing etc complete all as specified and derected.

All as per item No 79 above but exhaust fan of size 380 mm sweep

All as per item No 79 above but exhaust fan of size 300 mm sweep

M&L for collecting unserviceable PVC exhaust fan 250mm sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the exhaust fan and taking out complete burnt winding from PVC exhaust fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing and depositing the exhaust fan to E/M store yard GE Nagrota including transportation and testing etc complete all as specified and derected.

M&L for collecting unserviceable wall mounted fan 450/400mm, sweep 230 V, AC supply, single phase from E/M store yard of GE Nagrota , Dismantling the wall mounted fan and taking out complete burnt winding from wall mounted fan motor and rewinding the same with super enameled copper winding wire of existing gauge & size including thoroughly cleaning all the components of fan, oiling & greesing painting with one coat of syntetic enemel paint after scrbbing and perparing the old painted surface replacement of rubber pads and depositing the wall mounted fan to E/M store yard GE Nagrota including transportation and testing etc complete all as specified and derected.

Taking down carefully from position , ceiling fan 230 volts single phase 50 Hz 1400 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. Note ; necessary accessaries paid seperately here in after.

All as per item No 84 above but ceiling fan of size 1200 mm sweep

Taking down carefully exhaust fan 230 volts single phase 50 Hz 450 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. Note ; necessary accessaries paid seperately here in after

All as per item No 86 above but exhaust fan of size 300/380 mm sweep

Taking down carefully wall mounted fan 230 volts single phase 50 Hz 450 mm sweep from the position & removing/ cleaning of dust properly, oiling and greasing of bearing including necessary repairs and refixing and connecting up with all requisite accessories complete all as specified and directed. Note ; necessary accessaries paid seperately here in after.

Supply in replacement of gun metal bush of required size suitable for ceiling fans and exhaut fans complete all as specified and directed.

supply in replacement of hanger for ceiling fan 1200mm/ 1400 mm sweep with nuts, bolts, washers complete all as specified and directed.

Supply in replacement ofaluminium blades for ceiling fan 1200 mm sweep complete all as specified and directed

Supply in replacement of aluminium blades for ceiling fan 1400 mm sweep complete all as specified and directed

Supply in replacement of bearing suitable for ceiling fan of any size complete all as specified and directed.

Supply in replacement of bearing suitable for Exhaust fan/Air circulator/wall mounted fan of any size complete all as specified and directed Make SKF / NBC

M&L scrbbing and preparing the old painted surfaces of ceiling fan of size 1200/1400mm sweep (Make :- Kessels /Usha / Orient / Crompton / Cool home / Bajaj/ Polar ) Complete including blade painting the same with white duco paint and writing the MES Nos of the fans, 25mm with black synthetic enamel paint and including oiling greasing of any make complete all as specefied and directed.

M&L scrubbing and preparing the old painted surfaces of exhaust fan of size 300/450mm sweep (Make :- Kessels /Usha / Orient / Crompton / Cool home / Bajaj/ Polar ) Complete including blade painting the same with white duco paint and writing the MES Nos of the fans, 25mm with black synthetic enamel paint and including oiling greasing of any make complete all as specefied and directed.

Supply & Fix canopy top and bottom for ceiling fans complete all a spcified and directed.

S & F in repairs flexible twin core 23/0.0076 with copper conductor including connecting fan of any make complete all as specified and directed.

S&F 300mm (3 Feet long) long fan down rod with clamp heavy duty as required in replacement complete all as specified and directed.

S&F exhaust fan frame made out of MS sheet of any make and size of exhaust fan with suitable size of nut bolt and washers complete all as specified and directed

Material and labour for replacement of Unserviceable Louvers with new louvers of exhaust fan 450mm sweep complete all as specified and directed.

Material and labour for replacement of Unserviceable Louvers with new louvers of exhaust fan 300/380 mm sweep complete all as specified and directed.

S&F in repairs oil filled condenser of 2.5 MFD capacity after removing existing unserviceable condenser from any situation complete all as specified and directed.

All as per item No 103 above but condenser 4 MFD capacity

S&F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc as required all as specified and directed.

Supply & fix blade suitable for wall mounted fan 400/450 mm sweep fan complete all as specified and directed

Supply & fix in replacement for shackle assembly for ceiling fan complete all as specified and directed

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete all as specified and directed

M/S ANMOL TRADING CO

M/S J S ENGINEERS

Allied Technologies