Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹5.0 LAccepted-AOC GUDSATHU BUDGAM KASHMIR 191111 J K | BUDGAM | BUDGAM | JAMMU AND KASHMIR | 191111 | L-1 | Accepted-AOC Accepted Being L-1 | |
| 2 | L-2₹5.1 L+₹8,813 (1.75%)Rejected-Finance R O IQBAL MARKET AALI MAJID EIDGAH SRINAGAR KASHMIR | SRINAGAR | JAMMU AND KASHMIR | 190001 | L-2 | Rejected-Finance Other Than
L-1 | |
| 3 | L3₹6.3 L+₹1.2 L (24.0%)Rejected-Finance R O KHREW TEH PAMPORE DISTT PULWAMA PIN 191103 J K | PULWAMA | JAMMU AND KASHMIR | 191103 | L3 | Rejected-Finance Other Than
L-1 | |
| 4 | Rejected-Technical | - | Rejected-Technical Copy of EPF code number/allotment letter has not been uploaded/submitted and also copy of enlistment letter has not been uploaded/submitted |
Tender Value
₹10 L
EMD Value
₹20,000
Closing Date
1 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) CIF (K)
AGE (I) CIF (K) SHALATENG
REPAIR AND MAINT TO FLOORING, JOINERIES, PLASTERING, FLOORING KITCHEN AND BATH FITTINGS ETC. IN HQ CIF (K) SIG REGT UNDER AGE (I) CIF (K).
2022_MES_531877_1
CA NO. AGE (I) CIF (K)- 48/2022-23
Open Tender
Civil Works
Item Rate
180 days
SHALATENG
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
AGE (I) CIF (K)
₹20,000
Yes
11 Aug 2022
18 Jun 2022
3 Aug 2022
18 Jun 2022
1 Aug 2022
2 Jul 2022
Amount
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by the Engineer-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed by the Engineer-in-Charge.
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws, complete all as specified and directed by the Engineer-in-Charge.
Taking down shutters of any description exceeding 2 sq.m each, complete all as specified and directed by the Engineer-in-Charge.
Plain framed , panelled shutters (any numbers of panels), 35mm thick, made of 2nd class soft wood (kail), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied & fitted to chowkats, complete all as specified and as directed by the Engineer-in-Charge.
Glazed and skeleton shutters, 35mm thick, made of 2nd class soft wood (kail) open rebated and prepared to receive glass, gauze, etc, (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.23(b) for doors etc are provided with stiles and rails, complete all as specified and as directed by the Engineer-in-Charge.
Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as per specification & drawings shown in SSR Part-II,, complete all as specified and as directed by the Engineer-in-Charge.
Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS Frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by the Engineer-in-Charge.
Taking down shutters of any description nit exceeding 1 sq.m each, complete all as specified and directed by the Engineer-in-Charge
Glazed and skeleton shutters, 30mm thick, made of 2nd class soft wood (kail) open rebated and prepared to receive glass, gauze, etc, (with sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, sizes of members of shutters as specified in SSR Part -I. section 8, clause 8.23(b) for doors etc are provided with stiles and rails, complete all as specified and as directed by the Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads including punching or drilling out old glazing pins/spring clips and providing and fixing new ones, complete all as specified and directed by the Engineer-in-Charge.
Sheet glass 4mm thick ordinary quality and glazing with oil putty/pins/spring pins or wooden beads in squares not exc. 0.5 Sqm in each pane, complete all as specified as directed by the Engineer-in-Charge.
Mild steel galvanised wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks, wire staples or beading etc. fixed in repairs, complete all as specified as directed by the Engineer-in-Charge.
Butt hinges, medium weight, cold rolled, mild steel 100 mm long (ISI marked) ,complete all as specified and as directed by the Engineer-in-Charge.
Butt hinges, medium weight, cold rolled, mild steel 75 mm long (ISI marked) ,complete all as specified and as directed by the Engineer-in-Charge.
300mm ordinary rat tail rod pattern door spring including roller and roller plate of mild steel, complete all as specified as directed by the Engineer-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 100mm long (ISI marked), complete all as specified as directed by the Engineer-in-Charge.
Aluminium anodised, barrel tower bolt of extruded section and fixed, 200mm long (ISI marked), complete all as specified as directed by the Engineer-in-Charge.
Aluminium handle, cast type, anodised, 150 mm long (ISI marked), complete all as specified and directed by the Engineer-in-Charge.
Aluminium handle, cast type, anodised, 100 mm long (ISI marked), complete all as specified and directed by the Engineer-in-Charge.
Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) with and fixing clips of sheet, cast or excluded sections and fixing bolts and sliding bolts of excluded sections or cast aluminum alloy and fixed, 300 mm long, complete all as specified and directed by the Engineer-in-Charge.
Preparation of new or previously untreated wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified as directed by the Engineer-in-Charge
Dismantling boarding, any description, fixed in any position with screws, complete all as specified and directed by the Engineer-in-Charge.
Dismantling timber scantling 40 Sq cm and over in section in any position, unframed work, complete all as specified and as directed by the Engineer-in-Charge.
2nd class soft wood (Kail) as in scantling, clean sawn timber, fixed in framed work, complete all as specified and as directed by the Engineer-in-Charge.
Plain fillets. square, rectangular or triangular in section, made of 2nd class soft wood (Kail), wrought, secured with nails or brads, sectional area exceeding 6 sqcm but not exceeding 13 sqcm, complete all as specified and as directed by the Engineer-in-Charge.
18/19mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,as in shelves/kitchen cupboards/almirah shutters, complete all as specified as directed by the Engineer-in-Charge.
Hasp and staple, of size 75mm long, mild steel, safety type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified as directed by the Engineer-in-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors/plateforms, aprons etc. laid bedded and pointed in any mortar, complete all as specified as directed by the Engineer-in-Charge.
Machine cut kota stone slab 20 to 25 mm thick, as in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, laid over and including 15 mm thick screed bed or bedding layer in cement mortor 1:6, complete all as specified and directed by the Engineer-in-Charge.
Machine cut kota stone slab 20 to 25 mm thick, as in vertical surfaces such as risers, skirting/dado etc. over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, laid over and including 10mm thick rendering on brick/concrete surface in cement mortor 1:4, complete all as specified and directed by the Engineer-in-Charge.
Sink with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, including 40 mm dia waste coupling of PTMT (Half or full threaded) (Minimum weight 32-45gms/40mm-60 gms), fixed in repairs, complete all as specified and directed by Engineer-in-Charge.
Dismantling of water tanks of capacity exceeding 500 litres but not exceeding 1000 litres, complete all as specified and directed by the Engineer-in-Charge.
Rotational moulded polyethylene water storage tanks of capacity 1000 litres three layered (Cylindrical vertical with closed top) hoisted and fixed in position including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Part-I, including 20mm dia ball brass valves, high pressure, with polythene float and flynut, complete all as specified and as directed by the Engineer-in-Charge.
Rotational moulded polyethylene water storage tanks of capacity 500litres three layered (Cylindrical vertical with closed top) hoisted and fixed in position including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Part-I, including 20mm dia ball brass valves, high pressure, with polythene float and flynut, complete all as specified and as directed by the Engineer-in-Charge.
Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 15 mm bore pipe, fixed in repairs, complete all as specified and directed by the Engineer-in-Charge.
Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in 20mm bore pipe, fixed in repairs, complete all as specified and directed by the Engineer-in-Charge.
Demolition of cement concrete un reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge.
Plain cement concrete, 1:2:4, type B-0 using 12.5mm graded crushed stone aggregate, 25mm thick, surface finished fair to receive top layer of flooring, complete all as specified and as directed by the Engineer-in-Charge.
Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.18sqm, but not exceeding 0.38sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.
Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.11sqm, but not exceeding 0.18sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by the Engineer-in-Charge.
Glazed ceramic tiles, coloured, of size 350 x 250 /450 mm x 350mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortor 1:4, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.
Cleaning sunken portion of slab (Bottom and sides) and providing water proofing treatment as under, complete all as specified and as directed by the Engineer-in-Charge.:- (i) Plain cementcncrete type B1 1:2:4, using 20mm gradred crushed stone aggregate, 100mm thick, admixed with water proofing compound, as in sub base/floors (ii) Rendering 15mm thick in cement mortar 1:3 admixed with water proofing compound (iii) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and as directed.
Plain cement concrete 1:4:8, type D-2, using 40mm graded crushed stone aggregate, as in foundation filling and mass concrete in suken portion of slabs, complete all as specified and asdirected by the Engineer-in-Charge.
Applying evenly a priming/tack coat with bituminous primer at 4kg per 10 sq metre for suken treatment, complete all as specified and directed by Engineer-in-Charge.
After the primed dryed surface applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cu. m. per sq. m, complete all as specified and as directed by the Engineer-in-Charge.
Taking up or down steel tubing and connections, 15 mm bore, including cleaning for refixing, complete all as specified and as directed by Engineer-in-Charge.
Steel water tubing of nominal bore 15 mm, medium grade galvanised with all fittings including short lengths, fixed to walls and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete all as specified and directed by the Engineer-in-Charge.
Taking up or down steel tubing and connections, 20 mm bore, including cleaning for refixing, complete all as specified and directed by the Engineer-in-Charge.
Steel water tubing of nominal bore 20 mm, medium grade galvanised with all fittings including short lengths, fixed to walls and ceiling or laid in floor complete with all fittings( such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.), complete all as specified and directed by the Engineer-in-Charge.
Stop valves 15mm bore, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.
Bib taps, 15mm bore, cast copper alloy, chromium plated, fancy type with crutch or butter fly handle, screwed down, screwed for iron pipe, or brass ferrule and fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.
Pillar taps, 15mm bore, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered `Hot’ or `Cold’ with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.
Brass CP wall/basin mixer,15mm bore, for mixing hot and cold water screwed down for iron pipe and fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.
Supply only liquid water prppfing compound of approved make., complete all as specified and as directed by Engineer-in-Charge.
Vitreous China, wash hand basin, flat back white of size 550mm x 400mm including brackets, waste coupling of PTMT (half or full threaded) (Minium weight 32mm -45grms/40mm-60grms) with long screwed shank and fly nuts, 32mm dia PVC waste pipe, chain and plug, porcelain stopper including cutting for and pinning in ends of brackets or erecting stand, fixed in repairs, complete all as specified and directed by Engineer-in-Charge
Vitreous Chinaware squatting pan, orissa pattern size 580mm x 440mm with integral foot rests, white, with cast iron ‘P’ or ‘S’ trap, front or back inlet, including provision of lime concrete, making connections to trap and to flush pipe etc. and making good to floors, fixed in repairs, complete all as specified and directed by the Engineer-in-Charge.
PVC valveless, syphonic action type flushing cistern, 10 litres capacity, plunger type, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe 90cm long, fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.
PVC connection 15mm size with PTMT nuts of length 600mm, fixed in repairs, complete all as specified and as directed by the Engineer-in-Charge.
PVC (SWR) pipes, 110mm dia, single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and as directed by the Engineer-in-Charge.
PVC (SWR) branch pieces, 110mm bore, single Y/bends/Tee (equal or unequal), complete all as specified and as directed by the Engineer-in-Charge.
PVC (SWR) bends (any radious), 110mm bore, diminishing pieces or tapers, complete all as specified and as directed by the Engineer-in-Charge.
Taking down plastering in cement lime or cement mortor on brick or stone work etc. including racking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed by the Engineer-in-Charge.
Rendering 10mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.
Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.
Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer, complete all as specified and as directed by the Engineer-in-Charge.
Preparation of new plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion over and including 3mm thick wall care putty and chalk whiting on walls, complete all as specified and as directed by the Engineer-in-Charge.
Note :- An amount of Rs.56,230.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S SHIMAR STAR GLACIER
M/S SHEIKH FEROOZ AHMAD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .