REPAIR / REPLACEMENT / IMPROVEMENT OF UNSERVICABLE WIRING AND FITTINGS WITH LED FITTING AT VARIOUS OTM/MD ACCN UNDER AGE E/M OF GE BENGDUBI MIL STN

Amount

SCHEDULE 'A'

Taking down carefully copper/ aluminium point wiring (light, fan, buzzer, socket or power) complete including fixture and fittings such as switches, ceilling roses, pendants , regulators, sockets light fitting etc for taking credit removing from site and making good disturbed surface of walls, floors etc as per existing specification complete all as specified and directed.

Taking down carefully by unscrewing from boards/ outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site complete all as specified and directed. (Note : To be measured only when found serviceable in all respects complete for reuse)

M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc including testing on completion complete including cutting chases for concealed conduit pinning in making good to facing and pointing in using cement mortar 1:3 and making good to disturbed surface for the following: -

One light point or one light point/fan point/ calling bell point controlled by one switch

One 3 pin socket outlet, 5 Amp independent

One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including 20 mm dia (medium grade) rigid non metallic PVC concealed conduit terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

M&L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 1.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 1.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mmX300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of switches, sockets, fan regulators etc for the following: -

One light point controlled by 2-way switch

One light point or one fan point /lightpoint/ bell point controlled by one switch

One 3 pin socket outlet, 5 Amp independent

One 3 pin socket outlet, 5 Amp on the same board with other switches

M&L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables 1100 Volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FRLSH PVC insulated unsheathed multistranded copper conductor cable 1100 Volts grade of 2.5 sqmm size through and including PVC casing & caping (double lock) of suitable size with all necessary fittings, terminated in and including pressed steel sunken boxes , readily available (Having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not less than 1.63 mm) concealed type with 3mm thick bakelite sheet cover for fixing of one 15 Amp switches-sockets outlet independent complete all as specified and directed.

M&L for concealed flame-proof point wiring FRLSH PVC insulated unsheathed single core multi-standard copper conductor cable 1100 volt gade of 1.5sqmm drawn through and including (medium grade) stove enamelled steel conduit in concealed of FRLS PVC insulted unshelathed single core multi standard copper conductor cable for earth continuity wire, connected to earth dolly and to be terminated in control Gear box/Flame proof switch wih and including flame proof junction box as per requirement including testing on completion compete including cutting chases for concealed conduct pinning in making good to facing and pointing in using cement mortar and making good disturbed surfaces complete all as specified and as directed.

Dito all as per item No 7.00 here-in-before nut for one 15 amps 3 pin switch socket outlet, independent with FR-LSH PVC insulated unsheathed mltistandard copper conductor cable 1100 volts grade of 2.5 sqmm size alongwith one earth continuity conductor with FR-LSH PVC insulated unsheathed multistranded copper conductor cable 1100 volts grade of 2.5 sqmm size complete all as specified and as directed.

Supply and fixing switch flame proof rotory type with termination box in LM6, 16A single pole 250 V complete all as specified and as directed.

Supply and fixing flame proof switch socket & plug combined in LM6 cable termination box in LM 6, 16 A 250 V,2p+ Earth complete all as secified and as directed.

S&F LED fitting 1x16/20 watts flame proof type FLP-WP made of aluminium alloy LM6, with all accessories LED lamp rod, pre wired and including connecting up copper conductor cable with suitabe size complete all as specified and as directed.

S&F in replacement Switch piano, flush button, 5/6 Amps, single pole, two way, 230 Volts complete all as specified and as directed.

S&F Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

Fixing only Switch piano any type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F in replacement Socket outlet 2 in 1, 3 pin, 5 Amp complete all as specified and directed.

Fixing only Socket outlet 5 Amp any type(as retrived against item Ser No 2 here-in-before)

S&F Switch socket combination 5 pin, 2 in 1, 5 Amp flush type complete all as specified and directed.

Fixing only Switch socket combination 5 pin, 2 in 1, 5 Amp flush type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

S&F Switch socket combination multipurpose 3 pin 16A and one 3 pin 6Amp 5 in 1 flush type complete all as specified and directed.

Fixing only Switch socket combination 5A/ 16A, 5 in 1 flush type (as retrived against item No 2.00 here-in-before) complete all as specified and directed.

Supply and fixing including connection call bell AC 230 volts, single pole, Make : ANCHOR/CONA/BAJAJ/.

Supply and fixing including connection of bell push button type 5 Amps, Make : ANCHOR/BAJAJ/CONA

Fixing only Bell push (as retrived against item Ser No 2 here-in-before)

S&F Ceiling rose, 3 way PVC insulated body complete all as specified and directed.

Fixing only Ceiling rose any type (as retrived against item Ser No 2.00 here-in-before)

S&F in replacement stepped socket type electronic fan regulator flush type (2-Module)

S&F in replacement stepped switch type electronic fan regulator flush type .

S&F LED Tube Light luminaries with high performance LED with driver 1 x 18W (4 Feet long, Cool day/Warm white) complete all as specified and directed . Make Havells / CG /Philips.

S&F CFL light fitting 1x10W LED bulk head luminaries IP65, complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V,50HZ. make:Havells /Philips/CG

S&F in replacement Decorative CITY 1 wall light fixture made up of Polycarbonate suitable for 9 W LED lamp (B22) includin 9 W LED Bulb etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexiblecopper conductor cable with suitable size complete all as specified and as directed. (Make:Philips / Havells / Crompton).

S&F in replacement Building security LED light luminaire fitting 1X25 W and including cable for connection from celling rose with 1.5 Sqmm PVC insulated stranded copper conductor (FRLS) cable including GI bracket medium grade bent to shape complete all as specified and as directed. (Make: Philips / Havells / Crompton).

Taking down of Old MCB DB / control box any type any size including MCBs and separating the serviceable MCB DBs and MCBs for reuse at site complete all as specified and directed.

S&F in replacement sheet metal enclosure for MCB, DBs, Vertical type, double door, phosphatised, Powder coated , Triple Pole and Neutral (TPN), fixed flush to wall , IP 30 and IK 08 Protection Grade, including adjustable type MCCB as incoming of capacity 100Amp,4 pole with breaking capacity 25kA, 4 way, Double door 415 Volts complete all as specified and directed. Make:LEGRAND/ABB/schneider

S&F in replacement Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way with common bus bar at incomming end. complete all as specified and directed Make:Legrand/ABB/schneider

S&F sheet metal enclosure double door for DB'S 12 Way when MCBs to be used single pole neutral 240 Volts with 200 A Bus Bar complete of following sizes all as specified and directed.

S&F sheet metal enclosure double door for DB'S 8 Way when MCBs to be used single pole neutral 240 Volts with 200 A Bus Bar complete of following sizes all as specified and directed.

S&F sheet metal enclosure double door for DB'S 4 Way when MCBs to be used single pole neutral 240 Volts with 200 A Bus Bar complete of following sizes all as specified and directed.

S&F sheet metal enclosure double door for DB'S 2 Way when MCBs to be used single pole neutral 240 Volts with 200 A Bus Bar complete of following sizes all as specified and directed.

Refixing of MCB DB any type

S&F in replacement MCB Four pole, 415 volts, 40-63 Amps, breaking capacity 10KA .Make:Legrand/ABB/C&S/schneider

S&F in replacement MCB 'C' series Double pole 6 to 32 Amps, breaking capacity 10KA. Make:Legrand/ABB/C&S/schneider

S&F in replacement MCB 'C' series single pole 6 to 32 Amps, breaking capacity 10KA. Make:Legrand/ABB/C&S/schneider

Refixing of MCBany size any type

Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situation

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through PVC Conduit complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 6.0 sqmm as earth continuity conductor drawn through PVC Conduit complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 4.0 sqmm as earth continuity conductor drawn through PVC conduit complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

M&L for sub main wiring with 2 run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5sqmm alongwith one run of FRLS PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 1.5sqmm as earth continuity conductor drawn through PVC conduit complete all as specified and directed. Note :- (a) PVC Conduit shall be included in same rate. (b) All the incomming and outgoing cable should be connected throgh proper lugs & sockets as per site requirement)

S&F in replacement Modular Switch 1 way 6 A, 1 module complete all as specified and directed.

S&F in replacement Modular Switch 1 way 16 A, 1 module complete all as specified and directed.

S&F in replacement Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement Modular Socket 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and directed.

S&F in replacement Modular Regulator Step Type 120 watt, 2 module complete all as specified and directed.

S&F in replacement Modular Blank plate, 1 module complete all as specified and directed.

S&F in replacement Modular type White cover plate with frame 2 module complete all as specified and directed.

S&F in replacement Modular type White cover plate with frame 3 module complete all as specified and directed.

S&F in replacement Modular type White cover plate with frame 4 module complete all as specified and directed.

S&F in replacement Modular type White cover plate with frame 6 module complete all as specified and directed.

S&F in replacement LED bedside light fitting with 180O swivel and in-built on-off switch as directed.

S&F in replacement surface and wall mounted LED batten 20W with integrated electronic driver (4 Feet long) complete all as specified and directed . Make:philips/Havells/Crompton.

S&F in replacement surface and wall mounted LED batten 9/10W with integrated electronic driver (2 Feet long) complete all as specified and directed . Make:philips/Havells/Crompton.

Supply and Fix in replacement LED cool day/warm light down lighter with aluminium housing recess mounted round / squre type 15 watt complete all as directed. Make:philips/Havells/Crompton.

Supply and Fix in replacement LED down lighter with aluminium housing surface mounted round / squre type 15 watt complete all as directed. Make: philips/Havells/Crompton.

S&F in replacement 50W LED Flood Light including suitable driver, nut, botls, washer, bracket & clamps all as specified & directed. Make:philips/Havells/Crompton.

S&F in replacement LED post top light 25/30 Watt as suitable including all accessories as specified and as directed.make:havells/philips/CG.

S&F LED in replacement SPOT light with spike 15 watt cool day/Warm White any colour adjustable type complete all as specified and directed.

S&F in replacement recess mounted LED wall washers ,tilted 70 degree outward and swivels 360 degree warm/cool day to offers best illumination on the wall and retail displays including LED driver complete all as specified and directed. Make.philips/Havells/Crompton.

S&F in replacement suspended architectural LED luminaire provides soft light and glare free symmetrical illumination with continous mounting end cap complete all as specified and directed. Make philips/Havells/Crompton.

S&F in replacement surface and wall mounted LED batten 22W with integrated electronic driver (4 Feet long) complete all as specified and directed. Make:philips/Havells/Crompton.

S&F in replacement MS Box in concealed of any type and any size complete all as specified and directed

S&F in replacement PVC hylum sheet 3mm thik top cover of size 300 x 250 x 3 mm complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 250 x 150 x 3 mm complete all as specified and directed.

S&F in replacement PVC hylum sheet 3mm thik top cover of size 150 x 100 x 3 mm complete all as specified and directed.

S&F in replacement PVC rectangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 200 x 150 x 50 mm deep complete all as specified and directed

S&F in replacement PVC rectangular block for mounting switch/socket/MCB DB's with 3 mm thick plastic laminated sheet cover of size 175 x 100 x 50 mm deep complete all as specified and directed

S&F in replacement flexible wire 2 core copper size 1.5 sqmm complete all as specified and directed

S&F in replacement Single Pole and neutral enclosure with a two pin and earth plug and socket complete with MCB Amp complete all as specified and directed. (Make ABB/Legrand/scheinder)

Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for cable trenches and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft / loose soil complete all as specified and directed.

Removing excavated materials to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

M&L sand cushioning (dry) in trenches for protection of UG cables (below, above and around the cable laid in trenches) of 230mm spreding thickness and consolidated (punned) upto 180mm thickness complete all as specified and as directed.

Material and labour well burnt old size sub Class ‘B’ bricks, laid flat, in trenches for cable protection complete all as specified and directed.

Taking out Old un-serviceable / faulty cable of any size from trench / pole complete all as specified and directed.

M&L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 25 Sqmm 3.5 core laid in trench/pole/on wall completer all as specified and directed. Make:Polycab/finolex/KEI

M&L for XLPE insulated GI wire/Strip armoured Electric power cable (Heavy duty) with stranded Aluminium conductor 1100 Volts grade, cross sectional area 16 Sqmm 2 core laid in trench/pole/on wall completer all as specified and directed. Make:Polycab/finolex/KEI

M&L for 40 mm dia GI tubing light grade with all necessary fittings laid in trenches, fixed to walls/ poles/ under road/ floor etc for cable protection, complete all as specified and directed.

S&F in replacement 1100 Volts grade heavy duty cable PVC insulated Aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connection twin core 10 Sqmm cable flate or Circular complete all as specified and diercted. Make:polycab/finolex/plaza

Taking down of wiring/Submain wiring upto size three phase 10.0 sqmm and refixing the same through new/ existing casing-caping or conduit for distribution of balanced elect load at any indicated situation [ Note: PVC casing-capping or PVC conduit shall be measured and paid under separate item here in-after ]

Supply only the following items for incorporated to the items No.88

PVC Casing-Caping of size 25mm, ISI marked

PVC Concduit of size 20mm,ISI marked.

Advance Maintenance Free G.I. SAFE EARTHING Electrode with PIPE of not less than 50 mm outer dia (THICKNESS NOT LESS THAN -2.5MM) and two meter length, The electrode should be of galvinised (80 -100 micron) along with earth lead as Galvanised steel strip of size 20 X 3 mm. The GI Electrode shall be pre-filled with Cristaline Conductive Material (CCM) . The GI electrode shall be surrounded with 25 kg Back Fill compound to provide maximum contact between the electrode and Back Fill Compound. Backfill compound should be eco-frendly and having RoHs certification. GI Electrode Shall be tested from CPRI. The earting pit should be cover with PCC (1:2:4 Type B1) cover of size 450mm x 450 mm complete including excavation eartwork etc all as specified and directed. (Make ASHLOK / JMV / TRUPOWER)

S&F in replacement LED single tube only 18/20 watt (4ft) 240 Volt Ultra Bright with high efficiency suited for installaton in existing T8 tube light fittings complete all as specified and directed

S&F in replacement lamp holder, PVC/polycarbonate type with back plate suitable for B22 lamp including LED Bulb complete all as directed

S&F in replacement 12 W LED round/square surface mounted downligher including suitable driver and all accessories to fixed on ceilling/wall as specified and directed

S&F in replacement 12 W LED round/square recessed mounted down ligher including suitable driver, cuttings of false ceilling as required and all accessories for fixing arrangement all as specified and directed

S&F in replacement 36 W LED cool day/warm light square type 2' x 2' recessed mounted downligher including suitable driver, cutting of false ceiling as required and all accessories for fixing arrangement all as specified and directed (Make- philips/Havells/Crompton).

S&F in replacement 36 W LED square type 2' x 2' surface mounted downligher including suitable driver (Make- philips/Havells/Crompton).

Fixing only serviceable light fittings any type (as retrived against item Ser No 2 here in before).

(Note : The Scope of Work contained in 'Sch of Credit' amounting to Rs. 80,552.00 (refer Tender Srl Page No 39). The Quoted sum shall be arrived at after deducting the amount of “Sch of Credit” from the total amount of the ‘BoQ’

UNIVERSAL CONSTRUCTION

Shree Ram Construction

M/S KAR CONSTRUCTION

PRADIP KUMAR BOSE

GURUNG CONSTRUCTION

M/S CONTRACTS

M/S R. K. INDUSTRIES