REPAIR/ REPLACEMENT TO FALSE CEILING, WALL PANELLING, KOTA STONE, PAVER BLOCK, ALUMINIUM DOORS, ROOF SHEET, SANITARY FITTINGS, WATER PIPELINE, WINDOWS GLASS PANES, WIREMESS, DOORS, WINDOWS, FLOAT VALVE, GATE VALVE, ALUMINIUM AND WOODEN DOORS AND WIND

Amount

Dismantling wall and ceiling boards (fibre pulp, insulation, etc) or insulation board/ slabs/ blankets any thickness including grid work/aluminium frame work, cover fillets, complete all as specified and directed.

M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre incl Hangers 6mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

M & L for 6mm thick Fibre Cement Designer Ceiling Tile, (High Pressure steam cured), pre-painted, self -embossed, reinforced Everest designer cemetn boards (Ivory Colour) of Oceanic/ Lake & Hill/ Electra/ Cascade texture, conforming to IS 14862: 2000 Category 3 Type B, having Density 1200kg/m3, miniumm module of Rapture greater than 10 Mpa and Compressive strenght 38.23 Mpa, complete all as specified and directed.

M & L for false ceiling with semi perforated 12mm thick micro tegular edged at all heights with GRC (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595 x 595mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99 % NRC 0.50 to 0.75 as per IS 8225 : 1987, Non combustible as per BS 475 (part 4) -1970 and light Code DESCRIPTION UNIT RATE NO 429 sub head : 26.0 new tchnologies and material reflectance of 85 % (minimum) to be laid in true hirizontal level suspended on interlocking metal T-Grid) of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32mm of lenght 3000mm, vross -T of size 15 x 32mm of lenght 1200mm and secondary intermediate cross -T of size 15 x 32mm of lenght 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm lenght and L-shape level adjuster of size 85 x 25 x 0.40mm of lenght 3000mm to be fixed on perimeter wall/ partition with the help of plastic rawl pluhs at 450mm centre to centre and 40mm long dry wall screws all as specfied and directed by Engr-in-Charge.

M&L for providing PVC WALL PANELLING of 5 mm thick consisting of panel of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelaminated PVC sheet. The panel & strips shall be density of 600 kg/CBM manufactured by ISO-9001-2015 certified company. The strips should have in their centre a gove of 6mm widht and 1 mm depth for sinking the head screws used to fix the strip to the wall vertically at an equal interval of 10 inch between two PVC strips. The PVC strips shall be fixed to the wall using 65 mm long MS screws through the groove in the strip by using PVC fasteners the distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall optionally a strips of 5mm thick PVC sheets of width 75mm feathered at the edges shall be stuck at the places where two panels are joined using solvent cement, complete all as specified and directed.

M&L for 10-12mm thick decorative plaster of paris false ceiling bending/ moundling as required shape with two coats of plaster emulsion paint over a coat of primer on decoratived surfaces of ceiling including 26 gauge galvanished iron sheet 'C' shaped main member @ 750mm C/C cross member 'U' shape @ 450mm c/c and perimeter of 'C' shaped GI wire 6mm dia or more or FI 40 x 4mm thick for hanging arrangement with MS suspension fastner spaced @ 450 MM C/C in both direction and 'C' member shall be made out of not less than 90mm wide GI sheet strip and side tray as required of approximate size 3.5 mtr height as required at site complete all as specified and directed.

Demolition of stone slab and tiles, interlocking paver block laid bedded and pointed in any mortor of any description or thickness in floor complete all as specifed

Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ompleteincluding 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 20-25mm thick inriser of steps, skirting, dado and pippar laid over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ompleteincluding 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M & L for coloured Rubber Moulded Chequred Cement Concrete tiles 400 x 400 x 30mm thick, set jointed and pointed in neat cement slurry in floors with grey cement and pigment over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

M&L for Machine coloured Rubber Moulded pressed precast concrete interlocking paver block any shape and size colour rubber finishes in top over confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigments over and including 30-40mm thick sand cushoining, complete all as specified and directed.

M&L for 100mm thick PCC type B2 (1:3:6) using 40mm graded stone aggregate) in subbase, path, paving, hardstanding etc, complete all as specified and as directed by Engineer-in-Charge.

M&L for 75mm thick cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection finished even and fair incl cutting joints and filling with bitumen and sand mixture complete all as specified and directed.

Resecuring/ tightening/ Repair of Aluminium door without taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) including repair/ replacement of hydraulic machine etc and other parts complete all as specified and directed.

M&L for 5.5mm thick sheet glass ordinary quality in panes exc 0.50 sqm each fixed with & including rubber gasket in aluminium frame work complete all as specified and directed.

Taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Taking down shutter only of any description exc. 1.00 Sqm but not exc. 2 sqm each & remove off the premises complete all as specified and directed.

S&F Pressed steel door frame for single door, size 105 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc., complete all as specified and as directed.

S&F Pressed steel door frame for single door, size 165 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3mm) of length 30 cm) etc., complete all as specified and as directed.

M & L for PCC 1:2:4 type B0 (12.5mm graded) aggregate for filling in pressed steel door framed, complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a), complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

M&L for Preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as complete all as specified and directed.

S&F 150mm size aluminium, anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S&F120mm size, butt hinges, heady weight, cold rolled mild steel, complete all as specified and directed.

S&F powder coated aluminium sliding window three track with two glass shutters using 5mm thick glass tinted modi guard and one shutter with stainless steel wire gauge wire cloth 0.31mm nominal dia of wire and width of aperature 1.61mm using aluminium powder coated section aluminium cleat, PVC track, bearing, handle, lock, rubber beading etc complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed.

S&F factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing

S&F 125mm size aluminium, anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F 120mm size, butt hinges, heady weight, cold rolled mild steel, complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles, fabricated type, complete all as specified and directed.

S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed.

Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom, connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and directed.

S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed.

Fixed in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe fixed in repairs complete all as specified and directed

S&F in repairs vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed

Fixed in repairs vitreous china, white, wash hand basin, flat back size 550 x 400mm 'including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 15mm size PVC connections internally threaded with PVC washer, PTMT nuts of length 600mm complete all as specified and directed.

S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and directed.

Fixed in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions, complete all as specified and directed.

S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

Fixed in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as directed.

S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

Fixed in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed.

S&F in repair 15 mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed.

Fixed in repair 15mm dia brass chromium plated pillar tap, fancy type with or without lettered 'Hot' or 'Cold', with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as directed.

S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

Fixed in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified.

S&F in repair Grating 100mm dia of CP with or without hole complete all as specified and directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

S & F 15mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors, complete all as specified and directed.

M&L for refixing old steel tubing and connections in new or old position (walls, ceiling, floors, etc.) for 15mm dia pipes with and including all new fittings complete all as specified and directed.

Taking up or down 20mm steel tubing and connections, including cleaning for refixing or removal to store complete all as specified.

S & F 20mm bore of tube medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors.

M & L for refixing for laying & testing 20mm dia (Nominal bore) galvanised iron water tubing 'medium grade' with and including all GI fittings such as unions, reducer sockets, socket reducing bends, elbows, tee, checknuts, caps, plugs etc. fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, complete all as specified and directed.

M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane, complete all as specified and directed.

S&F in repairs Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

S&F in repair 40mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed.

Dismantling of 75mm internal dia cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches or floor or wall if required

S&F PVC (SWR) pipe 75mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants etc complete all as specified and directed.

S&F in repair PVC (SWR) bend/ shoe 75mm dia, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/ junction (single T) equal or unequal 75mm dia, any radius as required and jointed with approved adhesive and fixed to floor complete all as specified and directed.

Dismantling of 110mm internal dia cast iron, SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortor and taking out of trenches or floor or wall if required, complete all as specified and directed.

S&F PVC (SWR) pipe 110mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive fixed to wall with iron cleants with minimum 3 feet distance at wall etc complete all as specified and directed.

S&F in repair PVC (SWR) bend/ shoe 110mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair PVC (SWR) Tee, Reducer/junction (single T) equal or unequal 110mm dia, any radius as required and jointed with approved adhesive and fixed to wall complete all as specified and directed.

S&F in repair Ball valves 15mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm- 690 gms), complete all as specified and directed.

S&F in repair Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm- 690 gms), complete all as specified and directed.

S&F in repair Ball valves 25mm high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm- 690 gms), complete all as specified and directed.

Disconnecting existing tanks (exc 250 but n. exc 500 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains. The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes, etc. and hoisting if required reconnecting and re-fixing in the same position incl writing the date of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning, complete all as specified and directed.

Disconnecting existing tanks (exc 500 but n. exc 1000 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains. The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes, etc. and hoisting if required reconnecting and re-fixing in the same positiondate of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning, complete all as specified and directed.

Disconnecting & taking down existing water tank of capacity exc 250 liter and not exc. 500 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 500 lts capacity (cylindrical vertical with closed top) hoisted with and including 20mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part-I complete all as specified & directed.

Disconnecting & taking down existing water tank of capacity exc 500 liter and not exc. 1000 liter and removing from site complte and S&F rotational moulded polyethylene water storage tanks 1000 lts capacity (cylindrical vertical with closed top) hoisted with and including 20mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part-I complete all as specified & directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed

M&L for Brick work with sub class B bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as Specified and directed

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed.

M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer's instruction, finished fair and even without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces pf plastered of walls and applying Acrylic Emulsion piant for internal surfaces of walls including one coat of wall putty all as directed by Engr-in-Charge

M&L for preparation of old surfaces of walls and applying one coat of Acrylic Emulsion piant for internal surfaces of walls, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on walls including mixed with WPC as per manufacturer's instruction's and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respectiveitem of sch 'A'.

M&L for preparation of new surfaces of walls, surfaces should be free from any loose paint, dust or grease, growths of fungus, algae or moss should be removed by wire brushing and water. Cracks should be filled with crack seal of premium quality, dents and holes should be filled with putty or a mix of white cement and fine sand in the ratio 1:3 and applying two coats of with Premium Acrylic Smooth exterior paint with Silicone additives of required shade @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) and incl one coat of wall putty (Asian paint or Equivalent) as per manufactor's instructions complete all as directed by Engr-in-Charge. (Note :- painting will be done by brush/ spray/ roller of building upto the height G+6) all as per directed by Engr-in-Charge).

M&L for preparation of old surfaces of walls, surfaces should be free from any loose paint, dust or grease, growths of fungus, algae or moss should be removed by wire brushing and water applying one coats of with Premium Acrylic Smooth exterior paint with Silicone additives of required shade @ 1.43 ltr/ 10 sqm over complete all as specified and directed. (Note :- painting will be done by brush/ spray/ roller of building all as per directed by Engr-in-Charge).

M &L for broken floor tiles including broken of concrete, old gully/ nahani trap of any type and S&F in repair 110mm dia PVC gully/ nahani trap with 100mm dia, CP grating including including jointing to waste down pipe fixed in cement concrete type B-1 (1:2:4) or solvent complete all as specified and directed. (Note :- The work should be carried out in G+6 multystoreyed building)

S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification.

S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc.

S&F Brass handles 100mm size, cast type, polished bright as approved by Engr in Charge complete all as specified and directed

S&F 40mm dia, brass, knobs for cupboard fixed with nut, screw and washer of mild steel, bright finised complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30mm complete all as specified and directed.

Taking down old curtain rods/ drapery rods of any description and S&F 25mm Stainless Steel Curtain rod with premium quality including brackets and other accessories complete all as specified and directed.

M & L for fixed in repairs 18/19mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, complete all as specified and directed.

S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for15mm GI bore pipe complete all as specifed and directed

Fixed in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed

S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed

Fixed in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed

S & F in reparis Flexible waste pipe for wash hand basin fittled to Wash Hand Basin incl all necessary brackets etc all as specifed and directed by Engr-in-Charge.

S & F in repairs 32/40mm PVC downpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc complete all as specified and directed.

S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including 02 coat of cement based paints with primer incl all fittings, accessories etc all as specifed and directed by Engr-in-Charge .

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; angle framed work and similar works complete all as specified and directed.

M & L for two coat of synthetic enamel paint on surface of any description over 10 cm in width or girth not otherwise described incl preparation of new steel surfaces complete all as specified and directed.

M&L for taking down/ dismantling of existing roof treatment of any description such as PCC Padding/ Coba treatment/ mud phuska/ Lime conc, Old APP membrance roof treatment etc terracing including screed bed etc. Hessian base felt/ tar felt etc. (any type and thickness) complete all as specified & directed.

M&L for Removal of demolished materials to a distance exceeding 250 Mtr but not exceeding 500 Mtr and deposting where directed at a level n.exc 1.5 m above the starting point, complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on roof surface including mixed with WPC as per manufacturer's instruction's and finishing the surfaces even and smooth without using extra cement complete all as specified and directed. Note :- WPC shall be measured and paid for separately as supply only under respectiveitem of sch 'A'.

Supply & providing water proofing roof treatment with polymeric standard water proofing membrane, Aquaflex manufactured by M/s Bengal Bitumen, MULTIPLAS STANDARD, manufactured by STP TEXAS Ltd/ Hyperplas manufactured by IWL Ltd having 10 years gurantee for water tightness complete all as specified and described as under:- (a) Preparation of RCC roof surface and applying one coat of polymeric modified bitumen 85/25 @ 1.2Kg/Sqm over a coat of polymeric primer @ 0.30 Kg/sqm including cleaning surface all as per manufaturer's specification complete all as specified and directed. (b) Supply & providing water proofing with 3mm thick APP polymeric proofing membran of 3Kg/Sqm HYPERPLAS STANDARD/ MULTIPLAS STANDARD consisting of 100 micron HMHDPE film centre core including coating the surface with compatible primer and torch application of membrane with 10cm overlaps as required thereof, complete all as specified and directed. (c) Aluminium bituminous paint @1.10 Kg/Sqm shall be applied over the APP membrane surface. Note :- The work of water proofing treatment shall be got executed throughh expert team of manufacturers or authorised applicator of manufacturer.

M & L for Demolition of ends for damaged portion of chajja/ facia portion scrafying or removing Old loose dirt of cement concrete and removing of Old rusted reinforcement, lathing/welding of new reinorcement for damaged portion, fixing of 0.71mm dia wire netting of galvanised steel wire of size 12mm mesh fixed with tinned tack of wire stable for damaged portion and applying in CM (1:3) with level plaster for width of facia/ Chajja exc 10mm and n.exc 60mm finished even and smooth without using extra cement and including necessaryuse and waste of form work and concerting with PCC (1:2:4) type B-0 using 25mm graded stone agg mixed with Dr fixit concrete bonding solution as per manufacturer Instruction for required places, height of the bldg up to third floor from the above ground level for work. Widht of Chajja/ facia exc 30 cm but not exc 90 cm all as specified and directed.

M & L for RCC 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) as in Patch work for certain places of Roof slab, facia, Chajja with necessary from work and the height of the bldg up to third floor from the above ground level for work complete all as specified and directed. (Note :- Rate will be include for reiforcement also)

Demolition of stone slab and tiles, interlocking paver block laid bedded and pointed in any mortor of any description or thickness in floor complete all as specifed

Granite 25mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms, urinal partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

Demolition of cement concrete (unreinforced) of any description as in ground floors and pavings not exceeding 15cm thickness (above or below ground floors) complete all as specified and directed

M&L for broken stone or bounders hardcore of gauge n exc. 63mm , deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a floor/ true surface, complete all as specified and directed.

M&L for 25mm PCC 1:2:4 Type B-0 (Using 12:5mm stone agg) as in base floor with water proffing compound of Asian Paint, Pidilite, Dr Fixit or equivalent, complete all as directed and specified.

M&L for waterproffing treatment to sunkin portion of WC, bathroom etc by applying :- (a) All the borehole gaps between concrete surface and pvc pipe of various dia upto the neck level shall be filled with non-shrink free flow grout - Smart Care GP Grout or approved equivalent having dual shrinkage compensation property. Before the bore packing, surface of the pvc pipe and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent. (b) Applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Ultra Block 2K or approved equivalent . The mixing ratio of the coating shall be 60:40 (Powder : Liquid) parts by weight without any water addition in the mixing, etc., complete as per manufacturers specifications. (c) Loosely lay 150 GSM Geotextile (non-woven polyester) with a min of 100mm wide overlap . (d) Laying slope making and protection to the waterproofing treatment with 30mm avg. thick M20 grade screed for floors. Providing and applying 15mm thick with CM 1:4 for wall plastering admixed with PC based integral waterproofing compound Smart Care Vitalia, etc. complete, as per manufacturer's specifications(concrete charges Extra)

Resecuring without taking down chowkats or frame of any description exc 1.5 Sqm each and n.exc 4Sqm (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Resecuring without taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed.

Resecuring without taking down down shutter only of any description exc. 1.00 Sqm but not exc. 2 sqm each & remove off the premises complete all as specified and directed.

M & L for excavating hard/ dense soil in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surfaces, complete all as specified and directed.

M & L for PCC Type B2 1:3:6 (40mm graded aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.

S&F Pre- painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self tapping screws complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise described complete all as specified and directed

S & F mild steel work as in main and cross beams, hip and jack rafters; purlins, vertical sections, where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confiring to Fe 410-W (Gde-E 250 (quality A) all as specifed and directed by Engr-in-Charge .

S & F mild steel compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, incuding all lattice bars, stiffeners, gussets plates etc. confiring to Fe 410-W (Gde-E 250 (quality A)

S & F mild steel works in Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment with riveted, bolted or welded attachment. confiring to Fe 410-W (Gde-E 250 (quality A)

S&F powder coating anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F Anodised aluminium door shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified

M&L for 12mm thick pre-laminated particle board, interior grade, pre-laminated both sides with decorative choice laminations, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles, complete all as specified and directed.

M & L for Virified Ceramic tiles 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per item No.141 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M & L for Virified Ceramic tiles 10mm thick dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6, complete all as specified and directed.

All as per item No.143 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6

All as per item No.145 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of 350 x 250 x 7mm/ 450 x 350 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed.

BHATIA ASSOCIATES

Robin Associates

GIRIRAJ CONSTRUCTION AND TRADERS

NIDHI CONSTRUCTION

sunway associates