COMPREHENSIVE BR AND EM MAINTENANCE TO OTM ACCN OF A ARTY BDE AND STN UNITS UNDER AGE BR M AND AGE EM AT FARIDKOT MIL STN

Amount

M&L for taking down cement plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed .

M&L for rendering 10 mm thick in cement mortar 1:3 on ceiling, surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) following the under layer with scratching tool, applying cement slurry on the under layer of cement @ 3 Kg per square metre and top layer 15mm thick in cement mortar 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified (Payment for providing grooves shall be made separately).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion (white/tinted) after finishing the surfaces with a coat of wall care putty by hand roller complete all as specified and directed .

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coats of white wash complete all as specified and directed .

M&L for preparation of newly plastered or unplastered ceiling surfaces and applying two coats of white wash complete all as specified and directed .

M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of cement base paint complete all as specified and directed

Demolition of Brickwork or stone/boulder masonry,built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed

M&L for brick work with fly ash bricks using old size bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed .

All as per Srl item No. 12 here-in-before but except bricks complete all as specified and directed .

Demolition of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed .

M&L for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specified and directed .

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors, set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying finishes complete all as specified and directed .

S&F Non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm on vertical surface such as skirting / dados set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for Non skid ceramic tiles 7 to 8 mm thick,light colour (Square/rectangular) area of each tiles exceeding 0.18 sqm but n.exc 0.38 sqm, in floors, etc. set and jointed in neat cement slurry over and including 15mm thick screed bed in cement mortar 1:4 and pointed in coloured cement to match complete all as specified and directed.

M&L for Non skid ceramic tiles 7 to 8 mm thick,light colour (Square/rectangular) area of each tiles exceeding 0.18 sqm but n.exc 0.38 sqm as in vertical surface such as skirting, dados & risers to steps etc over and including 10mm thick rendering in cement mortar 1:4 and pointed in coloured cement to match complete all as specified and directed.

S&F Glazed ceramic coloured tiles 450mmx300mmx7mm thick (colour and shade as approved) as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white cement with pigment to match the colour of tiles over & including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed

S&F 8 to 9mm thick,vitrified ceramic, light shade, polished (coloured & shade as approved) tiles of size, n.exceeding 0.36 sqm as in floors etc set and jointed in neat cement slurry over & including 15mm thick screed in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed .

S&F 8 to 9mm thick,vitrified ceramic, light shade, polished (coloured & shade as approved) tiles of size, n.exceeding 0.36 sqm as in vertical surface such as skirting, dados & risers to steps etc over and including 10mm thick rendering in cement mortar 1:4 and pointed in coloured cement to match complete all as specified and directed

M&L for Machine cut kota stone slab flooring, 20-25 mm thick , set and jointed in cement slurry over & including 15 mm thick screed in cement mortar 1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .

M&L Machine cut kota stone slab 20-25 mm thick as in skirting, set and jointed in cement slurry over & including 15 mm thick rendering in cement mortar 1:4 and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing complete all as specified and directed .

M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and leveled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed .

M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base,paving etc complete all as specified and directed .

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified and directed

M&L for sand filling under floor with washed and screened dry fine river sand including watering, well ramming and consolidation complete all as specified and directed

S&F Machine pressed precast concrete coloured interlocking paver blocks,any shape and size, confirming to IS-15658-2006 of 60mm thickness,M-35 grade, laid with grey cement and pigment complete all as specified and directed .

M&L for dismantling of depressed Precast cement concrete interlocking paver block of any shape and size and refixing the same after making good with PCC/hard core and removing unserviceable blocks and rubbish off the premises complete all as specified and directed .

S&F factory made precast kerb stones in cement concrete M-25 including chamfers, weatherings,throatings etc in smooth finish & set in cement mortar 1:4 including necessary excavtion and earth work for embedding kerb stone at a depth as directed and temping around kerb stone and removal of surplus soil to a distance not exceeding 50 m and depositing where directed complete all as specified and directed .

M&L for preparation of newly plastered brick /concrete surface and painting with two coats of synthetic enamel paint (white/golden yellow) complete all as specified and directed

Dismantling boarding,any description,fixed in any position with nails complete all as specified & directed.

S&F 6mm thick precoated gypsum board as in ceiling fixed with screws as per manufacturer's instructions, including anodised aluminium snap grid frame work for false ceiling of grid 605x605mm,hangers 6mm dia (upto 1200mm length)adjusting level fixed to roof slab by means of ceiling cleats made of GI flat 40x3mm size & length 60mm and expansion hold fasterners 12.5mm dia,40mm long complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of ceiling

S&F solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet, inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall .

S&F 5mm thick PVC Sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specification and drawing all as specified and directed.

S&F PVC hollow wall lining interlocking type of 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawl plug and steel screws including fillets on joints as per manufacturer's instruction etc.complete all as specified and directed. Note:- Quoted rate of the item deemed to be included for taking down and refixing (as per existing) minor electric fittings and fixtures (if any) on the surface of wall

Demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for Mild steel TMT bars 10mm dia and over , cut to length, bent to shape as required, including cranking, bending and binding with & including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed .

M&L for use and waste of form work to chajjas, soffits of suspended slab such as roof slabs, not exceeding 200mm thick, horizontal or sloping ,fair finished surfaces complete all as specified and directed .

M&L for RCC 1:2:4, type B1 (using 20mm graded crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies , shelves and chajjas complete all as specified and directed.

M&L for applying one coat of epoxy bonding agent as per manufacturer's specifications complete all as specified and directed.

M&L for dismantling structural steel work including doors,gates,framed work etc complete all as specified and directed .

M&L for providing and fixing stainless steel (Grade-304) railing made of hollow tubes,channels,plates etc including welding,grinding,buffing,polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners,stainless steel bolts,decorative elements etc, of required size including making groove /drill with suitable fixing arrangement in RCC floor/staircase/brick wall complete all as specified and directed

S&F Rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails fixed with angle cleats or other connecting plates conforming to Fe-290(Gde-E-165) complete all as specified and directed

Dismantling of plain or corrugated steel/fibre glass sheeting, any gauge in roof covering complete all as specified and directed .

S&F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed .

S&F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws complete all as specified and directed .

All as per Ser item Nos 47 & 48 here-in-before but except sheet complete all as specified and directed .

S&F 2mm thick Fibre glass reinforced translucent sheeting with two corrugations side lap, fixed with coach screw and washers in roof, wall etc complete all as specified and directed.

All as per Ser item Nos 50 here-in-before but except sheet complete all as specified and directed .

S&F 6 mm thick asbestos cement (corrugated/semi corrugated) sheets as in roof/wall covering and fixed with L-type or J-type or cranked hook bolts etc complete all as specified & directed

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed

Taking down shutter of any description exc 1 sqm but n.exc 2sqm each & refixing the shutter in same opening complete all as specified and directed

Taking down shutter of any description exc 1 sqm but n.exc 2sqm each complete all as specified and directed

S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed.

S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed

S&F 35 mm thick 2nd class hard wood, plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed

S&F 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed

S&F factory made box type Steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded all as specified and directed .

S&F factory made box type Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete without glazing bars, dovetailed or welded all as specified and directed

S&F factory made box type Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed

M&L for 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares n.exc 0.5 sqm each pane complete all as specified and directed .

S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .

S&F 3mm thick, figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed .

S&F Solid PVC door frame of size 50mm x 95 mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. square tube, egdes will be painted to match printed sheets complete all as specified and directed .

S&F Factory Made Solid PVC wood grain printed Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed

S&F Anodised aluminium frame ,powder coated of coating not less than 50 micron and of any colour, fixed type for door, window, ventilator or partition counter frame with one of more rebates including joining cleat for fixing etc complete all as specified and directed .

S&F powder coated (thickness of powder coating not less than 50 micron) coloured aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws complete all as specified and directed .

M&L 4.8 mm thick, frosted sheet glass ordinary quality and glazing with oil putty or with wooden beads (supplied alongwith shutters) in squares exc 0.5 Sqm in each pane complete all as specified and directed.

S&F in repair aluminium (Die cast) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 kg and fixed complete all as specified and directed .

S&F Brass Mortice lock, vertical type, size 100 mm, 4 levers complete all as specified and directed.

S&F 100mm mild steel butt hinges, medium weight,cold rolled complete all as specified and directed.

S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.

S&F aluminium anodised barrel tower bolts,200 mm long of extruded section, fixed to doors with screws complete all as specified and directed .

S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .

S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed .

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed .

M&L for preparation of new or previously untreated steel surface of any description over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F in repair MS powder coated decorative drapery rod (colour as approved) 20mm dia of approved pattern & design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed.

M&L for PCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frames, bed blocks for fixing of hold fasts etc including necessary formwork complete all as specified and directed

M&L in repair for 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to frame-work in any position complete all as specified and directed .

S&F in repair continous piano hinges, mild steel, bright finish or electrogalvanised , 30mm width, fixed with screws complete all as specified and directed .

Dismantling of timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position complete all as specified and directed

M&L for 2nd class soft wood, plain fillets ,square, rectangular or triangular in section , clean swan,sectional area exc 13 Sqcm and not exc 25 Sqcm ,secured with nails or brads complete all as specified and directed.

Demolition of concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level) complete all as specified and directed

M&L for 75 mm thick cement concrete 1:3:6 type C2( using 40mm graded crushed stone aggregates) as in plinth protection/path finishing surfaces even and fair complete all as specified and directed .

Demolition of concrete (un-reinforced) as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas, roof staging and similar suspended work complete all as specified and directed.

M&L for water proofing treatment to RCC sunken slab as specified below and as directed:- (a) Cleaning the surface with wire brush / coir brush, removing loose material like dust particles, dirt etc. (b) Rendering 15 mm thick in cement mortar 1:3 using water proofing compound on raised vertical surfaces. (c) Creating fillet covering of 50 x 50 mm with polymer modified mortar on the junction of slab and wall (d) Apply first coat of two component modified polymer coating on the horizontal and vertical surfaces upto 300mm above wall surface. (e) Provision of polyester reinforced coated net of 45g/sqm, 2.5mm x 2.5 mm immediately on above coating. (f) Apply second coating of two component modified polymer coating after 72 hrs upto 300mm above wall surface.. (g) Laying concrete 1:4:8 over the coating as per requirement. (h) Joining the sanitary pipes with the waterproofing tape having bridging ability of more than 1.5 mm (j) Filling the gap between the wall opening and sanitary pipe with non shrink cementatious grout. (k) Complete treatment to be carried out by authorised applicator of waterproofing manufacturer. Note : (i) The treatment shall be carried out as per the manufacturers instructions and as directed by Engineer in Charge. (ii) The plan area of floor shall be considered for payment (iii) WPC shall be measured and paid seperately.

Supply only Liquid water proofing compound

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in roof kerb, mud stops including weathering, slightly rounded or chamfered angles including necessary form work for pipe support, finished even and smooth without using extra cement complete all as specified and directed

S&F in repair bib tap, fancy type, cast copper alloy with crutch or butter fly handle, screwed down, screwed for 15mm bore pipe & fixed complete all as specified and directed .

S&F in repair pillar taps,chromium plated ,cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed

S&F in repair Stop cock/angle cock with flange, cast copper alloy,fancy type,chromium plated, screwed down for high pressure with crutch or butter fly handle, screwed both ends for iron pipe of 15mm bore complete all as specified and directed .

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity,trippled layered, hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut , screwed for 20mm bore iron pipe complete all as specified and directed.

S&F in repair 20mm bore stop valve, cast copper alloy with handle, screwed both ends for GI out let/ inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed .

S&F in repair 15mm dia stop cock, cast copper alloy, chromium plated, concealed type with long shank with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .

S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches/in floors/fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .

S&F in repair PVC (SWR) bends/shoe, any radius ,110mm bore,fixed to wall including distance pieces and stack clamps complete all as specified and directed.

S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm including cantiliver CI/angle iron brackets, CP brass waste coupling 32mm bore with rubber washer and PVC waste pipe 32mm bore complete all as specified and directed .

S&F in repair PVC connection, 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

Taking up or down 15mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed .

Taking up or down 20mm dia GI tubing and connection including, cleaning for refixing or removal to store complete all as specified and directed

S&F Galvanised steeI tubing,15mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .

All as per item No 108 here-in-before but except tubes

S&F Galvanised steeI tubing,20mm bore, medium grade with all fittings , fixed to wall/ceiling and laid in floors complete all as specified and directed .

All as per item No 110 here-in-before but except tubes

S&F in repair 10 litres PVC,valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair vitreous china urinal ,half stall type , white,waste coupling of PTMT including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar, including connections to flushing pipe and outgoing pipes complete all as specified & directed .

S&F in repair Vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, CI 'P' or 'S' traps 100mm & PVC flush pipes 32mm dia including connecting to trap and to flushing pipe, anti-syphonage pipe etc including all joints and making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestel pattern/EWC/ longpan) white in colour including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia and plastic seat cover with mild steel chromoum plated hinging and 'P' or 'S' trap device complete all as specified and directed.

S&F in repairs PVC Jet spray with 1.50 m flexible tube for wash down water closet (pedestal pattern) and fixed complete all as specified and directed .

S&F sheet glass shelf assembly, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repair round/square grating of PTMT of size 100mm (minimum weight 50gms). Jointed to PVC pipe complete all as specified & directed .

S&F in repair Steel rolling shutters having thickness of laths 1.00 mm, without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

S&F in repair Steel rolling shutters having thickness of laths 1.00 mm, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated complete all as specified and directed. .

S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed

S&F pressed steel rectangular frames for built in cupboard doors, made out of mild steel sheet 1.0mm thick with girth of frame 185mm including MS rawls plugs and fixing 100mm long butt hinges, medium weight, cold rolled, mild steel etc including two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed

S&F pressed steel door shutters including stiffeners made out of mild steel sheet 1.0mm thick, cut to size, holes punched and welded seams including bending or turning up all around, mitered angle, one no locking arrangement as per Godrej pattern, two nos handle and applying two coats of synthetic enamel paint over a shop coat of zinc chromate primer complete all as specified and directed Note : (i) Measurement of door shutter shall be taken as exact size of cupboard opening (excluding frame and folded/ turned up portion) (ii) Stiffeners of 150mm girth and height equal to height of shutter made to shape as directed by Engr-in-charge. cost of these stiffeners shall be deemed to be included in the unit rate quoted for door shutters and no extra measurement/payment shall be made for the same..

Excavation in trenches in soft/ loose soil not exceeding 1.5m deep and 1.5m wide, for foundation etc or manholes,piers,shafts etc not exceeding 10 Sqm on plan and getting out complete all as specified and directed.

Returning, filling in including spreading leveling watering and well ramming in layers not exc 25cm in soft /loose soil complete all as specified and directed.

Removing excavated material or surplus soil not exc 50 meter and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed.

M&L in repair for providing precast cement concrete 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) as in louvers and jallies, 35mm thick (measured solid) including all moulding but excluding frame and set in cement mortar 1:4 complete all as specified and directed.

M&L for precast cement concrete 1:2:4 ,type B1(using 12.5mm graded crushed stone aggregates)as in lintels upto 1.5m clear span, window or door cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm in height, copings,side posts of precast jallies etc.set in cement mortar 1:4 complete all as specified and directed.

Dismantling and disconnecting existing CI pipe alongwith fittings of 100mm dia, below or above GL or laid in floors or fixed to walls, jointed in cement mortar and taking out complete all as specified and directed .

Dismantling and disconnecting existing CI pipe alongwith fittings of 75mm dia, below or above GL or laid in floors or fixed to walls, jointed in cement mortar and taking out complete all as specified and directed .

S&F 100mm dia cast iron, soil waste and vent pipe (sand cast), in any length with or without ears with cement joints, fixed to walls with clamps complete all as specified and directed .

S&F 75mm dia cast iron, soil waste and vent pipe (sand cast), in any length with or without ears with cement joints, fixed to walls with clamps complete all as specified and directed .

S&F CI bends with oval access door, diminishing pieces or tapers, bore of pipe 100 mm complete all as specified and directed .

S&F CI bends with oval access door, diminishing pieces or tapers, bore of pipe 75 mm complete all as specified and directed .

Dismantling of Bricks laid, (laid flat or on edge) or brick tiles in floors, roof, channels, kerbs, aprons etc bedded and pointed in any mortar (each layer) complete all as specified and directed.

Demolition of mud/soil/mud fuska in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of ) and disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified

Demolition of concrete (un-reinforced) in roof, any thickness including plastering and leaping (where full thickness removed or only a part there of ) and disposal of retrieved material to a distance n.exc 100m from the starting point complete all as specified and specified

M&L for rendering 10 mm thick in cement mortar 1:3 with WPC on fair faces of brick work or concrete surfaces as in roof complete all as specified and directed . Note : WPC will be measured and paid separately

M&L for 75mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in roof complete all as specified and directed.

M&L for Roof treatment to RCC roof as specified below as directed :- (a) Cleaning, washing of surface and removing all existing bitumen coatings completely with intense wire brushing or high speed water jet, surface should be free from any loose paint, dust or grease. (b) All cracks upto 3mm at corner joints, channels and parapets should be treated with crack seal and bigger cracks, damanged portions and hollow areas must be repaired with polymer modified cement mortars. (c) Apllying one coat of prime seal / Epoxy Primer/ Shaili Urethane BTD white diluted with potable water in the ratio of 1:1 and apply @ 0.40 Kg/Sqm (0.20 Kg BTD + 0.20 Kg water) (d) Laying polyster reinforced fiber net / 50gsm Geotextile mesh upto 300mm on walls. (e) Applying three coat of Hydro Shield PUD micro fibre reinforced UV resistent polyurethane (solid content 68%) / Damp proof ultra UV stable fibre reinforced elastomeric liquid water proofing membrane formulated with PU hybrid polymers (Solid content 55%) / Smart care PU magnum elastomeric water proofing coating based on hydrophobic plyuethane (Solid content 85%) / Single component elastomeric Liquid Membrane Shali Urethane BTD white/ coloured (Elongation 400% + 50, Solid contents > 80% & Specific gravity @ 30 OC 1.5 + 0.03) @ total 2.00 Kg per sqm in two coats for maintaining thickness of 1.5mm, with paint brush / roller upto 300mm on walls. (f) The complete treatment to be carried out by authorised applicator of water proofing manufacturer. Note (i) The treatment shall be carried out as per the manufacturer's instructions, and as directed by Engineer-in-Charge. (ii) The plan area of floor shall be considered for payment.

S&F EWC vitreous china, twin action, one piece wash down water closet pan with Soft Close Duroplast Seat Cover coloured complete all as specified and directed

S&F double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made out of mild steel heavy duty & fixed complete all as specified and directed.

S&F in repair pillar taps operated with elbow,chromium plated ,cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of 15mm bore complete all as specified and directed

Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.

Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLS with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc in the existing concealed conduit with new provision of 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc, covered with 2.8mm thick plastic laminate Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers, painting terminal boxes inside and outside with one coat of red oxide primer including continuous earth wire of size 1.5 Sqmm PVC stranded copper conductor unsheathed, insulated, stranded (Green colour) connected to common earth point dolly for for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed .

All as per Ser item No 145 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on same board with other switches complete all as specified and directed .

All as per Ser item No 145 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on independent board complete all as specified and directed .

All as per Srl item No. 145 here-in-before but for one ligh point controlled by two,two way switches complete all as specified and directed

All as per Srl item No. 145 here-in-before for Switch socket combination (multi purpose) 6 Pin 15 Amps 230 volts point to be controlled by one switch and wiring with 2.5 Sqmm FRLS PVC unsheathed copper conductor and FRLS cable 2.5 Sqmm PVC insulated earth wire on independent board.complete all as specified and directed

S&F PVC Lamp holder with back plate suitable for batten fittings complete all as specified and directed .

S&F complete set of tube light fitting, 1x20 watt LED (4 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F complete set of tube light fitting, 1x10 watt LED (2 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ceiling rose, three terminals, PVC polycarbonate, isolated body with bakalite 20mm back plate complete all as specified and directed .

S&F in repair Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 10 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 10 Sqmm for continous earth wire drawn into existing PVC concealed conduit complete all as specified and directed . Note :- Two runs of 10 Sqmm copper cable and one run of 10 sqmm copper wire earth continuty conductor shall be measured as one length)

S&F in repair Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 6 Sqmm for continous earth wire drawn into existing PVC concealed conduit complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor shall be measured as one length)

S&F switch piano, flush type, single pole, one way, 5 /6 Amp,230 V,AC supply complete all as specified and directed .

S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 volts AC supply complete all as specified and directed.

S&F Piano type switch, single pole, 2 way, 5/6 amps, 230 volt, AC supply complete all as specified and directed

S&F socket outlet, two in one, 5 Pin 5 Amps, 230 Volt, AC supply, complete all as specified and directed

S&F socket outlet ,2 in 1, 5/6 pin, 15/16 Amps, 230 volts ,AC supply complete all as specified & directed.

S&F bell push, flush type, 5 amps complete all as specified and directed

S&F Bell, ding dong, AC 230V, single pole complete all as specified and directed

S&F in repair Sheet metal enclosure for DBs,SPN, double door, 230 Volts,8 ways with 200 amps rated bus bar complete all as specified and directed .

S&F in repair MCCB, 4 Pole,fixed type ,415 V, 100 Amps with breaking capacity 16 KA including making good the disturbed surfaces complete all as specified and directed.

S&F in repair MCB SP 5 to 32 Amp, 240 volts, B Curve with breaking capacity 10 KA complete all as specified and directed

S&F in repair MCB SP 40 Amp, 240 volts, B Curve with breaking capacity 10 KA complete all as specified and directed

S&F in repair MCB SPN 40 to 63 Amp, 240 volts, C Series with breaking capacity 10 KA complete all as specified and directed

S&F in replacement Sheet Metal single pole and neutral Enclosures with a two pin and earth plug and socket with MCB SP 20 Amps suitable for working on 240 volts AC complete all as specified & directed.

S&F in repair stepped type electronic fan regulator, flush type on the existing pheonolic laminated sheet etc, single phase, AC supply, 230 V and connecting up complete all as specified and directed. .

S&F in replacement Modular switch 1 way 16 amps, 1 module complete all as specified and directed.

S&F in replacement Modular socket 6A /16A - 2/3 pin combined, 2 module complete all as specified and directed.

S&F in replacement Modular switch 1 way 6 amps, one module complete all as specified and directed.

S&F in replacement Modular switch 2 way 6 amps, two module complete all as specified and directed.

S&F in replacement Modular bell push 6 amps, one module complete all as specified and directed.

S&F in replacement Modular socket 6A -2/3 pin combined, 2 module complete all as specified and directed.

S&F in replacement modular metal flush box 1/2/3 modules including making good to disturbed area duly matching the colour with existing surface complete all as specified and directed.

S&F in replacement modular metal flush box 4 modules including making good to disturbed area duly matching the colour with existing surface complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 1 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 2 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 3 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 4 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 6 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 8 module complete all as specified and directed.

S&F in replacement of condenser 2.5/3.15 Mfd AC 240V, complete all as specified and directed.

S&F in replacement PVC non metallic rigid conduit, 25 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive of all tees, bends, reducer, bell mouth tube ends and fixing accessories, concealed including cutting chases in wall, floor and making good all disturbed surfaces matching with existing surfaces complete all as specified and directed.

S&F in replacement hylam sheet suitable size with cutting slot for mounting of switches,sockets,fan regulators including nuts,washer,thimble etc with 3mm thick plastic laminated sheet cover and making good all disturbed surfaces matching with existing surfaces complete all as specified and directed.

S&F in repair 1X10 watt LED retrofit type bulk head fitting luminaries, die cast, aluminium alloy body, heat resistant, prismatic glass cover with specially designed gasket, lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 HZ complete all as specified and directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 75mmx75mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 100mmx100mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 150mmx75mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 150mmx150mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

Supply and fixing LED luminaire 600 mm x 600mm, 35/36 watt, 220 V,AC, Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed with following specification :- (a) Lumen efficiency of luminaire should be more than 100 Lumen per watt. (b) Voltage operating range : 140 to 270 volts. (c) Temp operating range : Minus 10º C to Plus 50º C. (d) Power factor : Minimum 0.95. (e) THD : Max 10%. (f) IP rating : IP20.(g) CRCA pre coated housing. (h) LED driver of the make as of the luminaire,(j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Inbuilt Surge protection device for 4 KV.

S&F in repair energy efficient LED Security light fitting of 25W, pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/ roadway luminaire, with driver including electric connection, complete fitting with all accessories on and including bracket of 40mm dia,light grade ,GI pipe ,1.20 m and connecting with twin core twisted flexible copper conductor cable 1.5 Sqmm and with following specifications complete all as specified and directed :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max15%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12Hrs Note :- A Sum of Rs. 1,76,579.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 37 & 38 (Schedule of credit) of Tender Documents.

NEW AMRITSAR CONSTRUCTION COMPANY

M/S BSS AND SONS

SHIV SHAKTI BUILDERS

M/s R.K. CONSTRUCTIONS

BANSAL BUILDERS