REPAIR /RENEWAL OF FURNITURE AT RMS DHOPUR UNDER GE BHARATPUR

Amount

Almirah steel large /medium /small ( FD-1031,FD-1032, FD1033, ,FD-67(M), FD-104(M):-Taking out existing old UNSV MS handle of almirah steel large /medium /small (1031, FD-1032,FD1033, FD-67M,104(M)) and S&F new MS handles chromium plated (ISI marked, make : Godrej/Rina/Link) suitable for Almirah steel large /medium /small. Complete all as specified and directed.

Taking out existing old UNSV lock of almirah steel large /medium /small (1031, FD-1032, FD1033, FD-67M,104(M) and S&F new lock with double key (ISI marked, make : Godrej/Link) suitable for Almirah steel large/medium. Complete all as specified and directed.

Taking out existing old UNSV lock cap of almirah steel large /medium /small (1031, FD-1032, FD1033, FD-67M,104(M) and S&F for lock cap of almirah steel large /medium. Complete all as specified and directed.

Taking out existing old UNSV complete locking device from shutter of Almirah steel large (1031 FD1033,FD-67M,104(M) and S&F new locking device on shutter of Almirah steel large (1031,FD1033, FD-67M,104(M) properly. Shutter locking device MS rod should be not less then 08 mm thick and PGI sheet assy not less then 01 mm thick and applying two coats of syntshetic enamel paint over a coat of red oxide primer, Complete all as specified and directed.

Taking out existing old UNSV complete locking device from shutter of Almirah steel small (FD-1032) and S&F new locking device on shutter of almirah steel small (FD-1032) properly. Shutter locking device MS rod should be not less then 0 8mm thick and PGI sheet assy not less then 01 mm thick and applying two coats of syntshetic enamel paint over a coat of red oxide primer, Complete all as specified and directed.

Taking out existing old UNSV leg portion of Almirah steel large, Almirah steel with glass door of FD1031, FD-1032, FD1033, FD-67M,104(M) and S&F by welding of leg portion made to shape by 18 gauge plain sheet(1.2mm) of size 470 x 82 x 100 mm duly painted and applying two coats of synthetic enamel paint over a coat of red oxide primer,Complete all as specified and directed.

Removing of old UNSV leg portion of almirah steel medium/small (FD 1032) and S&F by welding of leg portion made to shape by 18 gauge plain sheet (1.2mm) of size 415 x 82 x 100 mm and applying two coats of synthetic enamel paint over a coat of red oxide primer. Complete all as specified and directed. .

(FD 1032, Fixing only of steel sheet shelves in almirah medium/small of any thickness and any size/ shape by providing new screws or brackets or stoppers as in repair as Complete all as specified and directed. (shelves to be obtained from old unserviceable steel almirah)

Removing of old UNSV shelves of almirah steel large ( FD-1031,FD-67M,104(M) and S&F new shelves on the same place with proper nut bolt /welding . Shelves should be made of 01 mm thick plain sheet and applying two coats of synthatic enamal paint over a coat of red oxide primer. Complete all as specified and directed.

Taking out existing old UNSV both shutters of almirah steel large (FD-1031, FD-67(M)) and S&F new both shutters of almirah steel large (FD-1031, FD-67(M). properly including locking device, lock and handle. Shutter should be made of 01 mm thick PGI sheet ISI marked and applying two coats of syntshetic enamel paint over a coat of red oxide primer. Complete all as specified and directed.

Taking out existing old UNSV both shutters of almirah steel small (FD-1032) and S&F new both shutters of almirah steel small (FD-1032) properly and applying locking device, lock and handle. Shutter should be made of 01 mm thick PGI sheet ISI marked including two coats of syntshetic enamel paint over a coat of red oxide primer. Complete all as specified and directed.

S&F godrej pattern MS hinges shape & size as existing in steel almirah fixed by welding. Complete all as specified & directed. (FD 1031,FD1032, FD 1033, FD-67(M))104(M)

M&L for preparing old painted steel surfaces of steel almirah (large) (FD-1031, FD-1033,FD 67(M))104(M) and painted to all internal and external surface complete and applying one coat of synthetic enamel paint (OG). Complete all as specified and directed.

-do- all as item No 13 but steel almirah medium and small (FD-1032, )

Stool steel 510 mm FD 81(M):- M&L for preparing old painted steel surfaces of stool steel 510 mm high and applying one coat of synthetic enamel paint (OG) to all internal and external surfaces (FD-81M). Complete all as specified and directed.

Table dinning T-402DL of (Godrej) :-Taking out old UNSV top of table dinning and S&F new top of table dinning of T-402 DL(Godrej including 4mm thick teak wood beading around the table top fixed to table frame by fevicol & steel screws. Top should be made of 18 mm thick prelaminated particle board ISI marked exterior grade.Complete all as specified and directed.

M&L for preparing old painted steel surface of table dinning and applying one coat of synthatic enamal paint on surfaces complete all as spacified and directed

Chair CB steel without arms (FD 75(M)):M&L for back frame of chair CB steel without arms. Back frame should be made of well seasoned IInd class HW free from all knots and defect duly caned with white coloured of 2 to 2.5 mm wide half round cane and bordered with 3.5 mm half round cane and painted with two coats of black synthatic enamal paint over a coat of wood primer after preparation of surface and fixing to chair with 75 mm long full threaded steel screw, washers and nut bolts as applicable including taking down old unserviciable back Complete all as specified & directed.

All as per items ser No18 but seat frame of chair CB steel.

M&L for preparing old painted steel surface of chair CB steel with arms (FD-75(M)) and applying one coat of synthatic enamal paint complete all as spacified and directed.

Book self open large steel FD-69(M)):-Removing of old UNSV shelves of book shelf open large steel and S&F new shelves on the same place with proper nut bolt /welding . Shelves should be made of 01 mm thick plain sheet duly painted by two coats of synthatic enamal paint over a coat of red oxide primer as Complete all as specified and directed.

M&L for preparing old painted steel surfaces of book self open large steel FD-69(M) and applying one coat of synthetic enamel paint (OG) to all internal and external surface complete all as specified and directed.

Table Writing (1145x 600 x 760mm) (FD-275, ) :Taking out of old unserviceable top of table writing (1145 x 600 x 760) mm and S & F new top of table writing including 4mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, Complete all as specified and directed.

Taking out of old unserviceable legs of Table writing (1145 x 600 x 760mm) and S & F new legs of Table writing (1145 x 600 x 760mm) including one coat of wood primer over wooden surface. Legs should be made of 1 st class hard wood well seasoned (Teak wood) free from all knots & creck, rest all as shown in drawing and Complete all as specified and directed.

All as per items ser No 24 but Top (long) rail of Table writing (1145 x 600 x 760mm).

All as per items ser No 24 but Top (short) rail of Table writing (1145 x 600 x 760mm).

All as per items ser No 24 but Lower rail of Table writing (1145 x 600 x 760mm).

Taking out of old unserviceable drawers of Table writing (1145 x 600 x 760mm)and S & F new drawers of Table writing (1145 x 600 x 760mm) including best quality fancy type PVC knob 32 mm dia, rest all as per shown in drawing and Complete all as specified and directed.

M&L for repair of all loose wooden parts of table writing (1145 x 600 x 760mm) and M&L two coat of french polish on all exposed surface of Table writing (1145 x 600 x 760mm) including preparation of surface rest all as shown in drawing Complete all as specified and directed.

Table (900 x 900 x 760 mm) FD-291:-Taking out old UNSV particle board top/part of table 900 x 900 x 760 mm, and S&F new top/part on the same items. Top should be made of 18 mm thick prelaminated particle board ISI marked decorated type exterior grade, including half round teak wood beading around the table top with fixed to table frame by steel screws & fevicol complete. Beading should be made of teak wood not less than 6 mm thick. Rest as shown on Drg and complete all as specified and directed.

Taking out old UNSV leg of Table (900 x 900 x 760 mm), and S&F new leg of Table (900 x 900 x 760mm), including one coat of wood primer of over wooden surface, legs should be made of 1st class hard wood well seasoned (Teak wood) free from all knots & crack rest all as shown in Drg complete all as specified and directed.

All as per items ser No 31 but top long rail of table (900 x 900 x 760 mm), rest all as shown in Drawing complete all as specified and directed.

Table Steel Tublar 920 x 920 x 760mm :- M&L for preparing old painted steel surface of table with one coat of synthatic enamal paint (OG) with spray machine / Brush to table steel tubular 920 x 920 x 760 mm complete all as specified and directed.

Charpoy GI Pipe 32mm MDF withTop (FD-220):-Taking out old UNSV long rail of charpoy GI MDF Top (FD-220) and S&F new long rail made of GI pipe 32 mm dia medium grade ISI marked. One nos new flate iron size 900mm x 25mm x 6mm long in the centre of long rail of each charpoy to be fixed by welding duly one nos hols for fixing of MDF board by flat head nut bolt with washer complete all as specified and directed.

Taking out existing old broken short rail Charpoy GI pipe 32mm with MDF top and providing in position short rails made out of old broken longs rail obtained from item No 34 were in before including threading on both ends Fixing all as specified and shown on drg complete all as specified and directed.

Taking out existing old UNSV broken leg from charpoy GI pipe 32 mm with MDF top and providing in position made out of GI pipe 32 mm dia obtained from item No 34 and S&F IInd class HW block fitted at bottom of leg with screw and two Nos MS clamp of size 25mm x 3 mm size welded on legs incl painting of clamps with two coat of synthetic enamel Silver paint over a coat of red oxide primer complete all as specified and directed.

Taking out old unserviceable MDF Top from each charpoy GI pipe 32 mm with MDF Top(FD-220) and S&F new commercial plywood ISI mark 12mm thick of size 6'6" x 3" on the top with flate head nut & bolt with washer complete all as specified and directed.

Taking out old unserviceable three way elbow from long rail /short rail etc of Charpoy GI pipe with MDF Top (FD-220) and supply and fixing in position new three way eilbow 32mm dia med. grade (ISI marked) complete all as specified and directed.

Taking out old unserviceable check nut from long rail /short rail etc of GI pipe Charpoy (FD-220 ) and supply and fixing in position new check nut 32mm dia 6mm thick complete all as specified and directed.

Desk Steel FD 1020-Taking out old unserviceable top, seat & back portion of Desk and S&F new top, seat and back in the same place of desk with nut and bolt. Top seat & back should be made of 18 mm thick prelaminated particle board on both faces decorated type exterior grade, including half round teak wood beading around the table top fixed to table frame by steel screw complete all as specified and directed.

M&L for preparing old painted steel surfaces of desk steel spray/brush painted with one coat of synthetic enamel paint (OG) to all internal and external surfaces of desk steel complete all as specified and directed.

Two Seater Chair with Desk achiver model No 2&3:- Taking out old unserviceable MS conduit pipe & PGI sheet part of desk achiver and S&F new MS conduite pipe (25 x 25 x 2 mm thick) & PGI sheet (1mm thick) on the same place by welding. All loose part of desk achiver model No 2 & 3 will be fixed by welding and nut bolt including one coat of synthetic enamel paint of all steel complete all as specified and directed.

Taking out of old unserviceable top and seat of two seater chair with desk achiver moder (2 & 3) S & F new top and seat of desk encluding 4mm thick half round teak wood beading alround the top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing complete all as specified and directed.

M&L for preparing old painted steel surfaces of desk achiver model No 2&3 and applying one coat of synthetic enamel paint (OG) to all internal and external surfaces of desk achiver model No 2&3 complete all as specified and directed.

Bed MS Godrej, Model Opal:-Taking out old unserviceable leg from head rest side of bed MS Godrej, model Opal and S&F new leg on the same places with nut and bolt including all wood work surface shall be painted with one coat of wood primer except where painting is indicated in Drg, legs should be made of Ist class well seasoned hard wood free from all knots & creck, rest all as per shown in drawing complete all as specified and directed.

Taking out old unserviceable leg from foot rest side of Bed MS Godrej, Model Opal and S&F new leg on the same places with nut and bolt including all wood work surface shell be painted with one coat of wood primer except where painting is indicated in Drg. Legs should be made of Ist class well seasoned hard wood free from all knots & crecks, rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable ply wood from bed ms godrej model opal and S & F new ply wood 12mm thick, ISI marked commarcial BWR with phenol fromaldehyde, rest all as per shown in drawing complete all as specified and directed.

Locker bed side steel (FD-1029):-Taking out existing old MS handle of Locker bed side steel (FD-1029). S&F new MS handle (150mm long) chromium plated suitable for Locker bed side steel. MS handle chromium plated will fixed with shutter of Locker bed side steel, rest all as per drawing complete all as specified and directed.

Taking out existing old UNSV Hasps and staple of locker Bed side steel (FD-1029). S&F new Hasps and staple suitable for locker bed side steel, rest all as per drawing complete all as specified and directed.

Removing of old leg portion of locker bed side steel (FD-1029). S&F new leg of locker bed side by welding of leg portion made to shape by 18 gauge plain sheet (1.2mm thick) duly painted by two coats of synthetic enamel paint over a coat of red oxide primer, rest all as per drawing complete all as specified and directed.

M&L for preparing old painted steel surface of Locker bed side steel (FD-1029) and applying one coat of synthetic enamel paint (OG) with sprey/ brush to all internal and external surface complete all as specified and directed.

Book self open small steel:- Taking out existing old shelves of book case open small steel , and S&F new in the same place . shelves should be made of 18 gauge plain sheet (1.2 mm) duly painted by two coats of synthetic enamel paint over a coat of red oxide primer, rest all as per drawing complete all as specified and directed.

M&L for preparing old painted steel surface of Book case open small steel and spray painted with one coats of syntshetic enamel paint(OG) to all internal and external surfaces complete all as specified and directed.

Form with back FD-78 :- Taking out old unserviceable seat of form with back ( FD-78 ) and S&F new plank on seat of form with back with nut and bolt with washer of size 65 x 6mm . Plank should be made of Ist class hard wood well seasoned free from all knots & crecks, rest all as shown in drawing complete all as specified and directed.

Taking out old unserviceable MS conduit pipe of Form with back and S&F new MS conduite pipe (25x25x2mm thick) on the same place by welding including one coat of black colour synthetic enamel painting of all steel surface complete all as specified and directed.

M&L for preparing old painted steel surface of form with back( FD-78,) and applying one coats of synthetic enamel paint complete all as specified and directed.

Form with out back FD 77(M):- Taking out old unserviceable seat of foam without back (FD-77M,) and S&F new plank on seat of Form without back with nut and bolt with washer of size 65 x 6mm . Plank should be made of Ist class hard wood well seasoned free from all knots & crecks, rest all as shown in drawing complete all as specified and directed.

Taking out old unserviceable MS conduit pipe of Form with out back and S&F new MS conduite pipe (25x25x2mm thick) on the same place by welding including one coat of black colour synthetic enamel painting of all steel surface complete all as specified and directed.

M&L for preparing old painted steel surface of form without back(FD-77M ) and applying one coats of synthetic enamel paint complete all as specified and directed.

Table centre (FD-274) :- Taking out of old unserviceable top of table centre and S & F new top of table centre (900X450X400)mm encluding 4mm thick half round teak wood beading alround the top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing complete all as specified and directed.

Table Centre (FD-274) :- Taking out of old unserviceable legs of table centre and S & F new legs of table centrer including all wood work surface shell be one coat of wood primer axcept where painting is indicated in drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & cracks rest all as per shown in drawing complete all as specified and directed.

All as per items ser No 61 but long rail of Table Centre.

All as per items ser No 61 but short rail of Table Centre.

All as per items ser No 61 but Bottom rail of Table Centre.

Prepration of surface of Table Centre repairing to all loose wooden parts and applying two coat french polish on all exposed surface of Table Centre complete all as specified and directed.

Peg Table FD-227, FD/MAP/11 : Taking out of old unserviceable top of peg table and S & F new top of peg table encluding 4mm thick half round teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable legs/ top rail of peg table and S & F new legs/top rail of peg table including all wood work surface shell be one coat of wood primer except where painting is indicated in drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & cracks rest all as per shown in drawing complete all as specified and directed.

Sofa set 5/4 Seater (FD-281) :- Taking out of old unserviceable cushioned seat of sofa set 5/4 seater . S & F new 100 mm thick cool foam 40 D cushion of size 560 mmx560 mm for seat of sofa set 5/4 seater . Cushion shall be covered with best quality tapestry cloth duly stitch. Colour /quality of cloth shall be approved byEngineer-in-charge. Rest all as per shown in drawing and complete all as specified and directed.

Sofa set 5/4 Seater (FD-281) :- Taking out of old unserviceable cushioned back of sofa set 5/4 seater . S & F new 100 mm thick cool foam 40 D cushion of size 560 mmx560 mm for seat of sofa set 5/4 seater . Cushion shall be covered with best quality tapestry cloth duly stitched. Cololur /quality of cloth shall be approved complete all as specified and directed.

Teapoy Wooden 600x450x540mm (FD-278, ) : Taking out of old unserviceable top of Teapoy wooden and S & F new top of Teapoy wooden including 3mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick prelaminated particle board bonded with phenol fromaldehyde confirming IS- 3087-1985 one side decorative type other side balansing white, rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable legs of Teapoy wooden and S & F new legs of Teapoy wooden including all wood work surface shell be one coat of wood primer axcept where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (Teak wood) free from all knots & crecks, rest all as per shown in drawing complete all as specified and directed.

All as per items ser No 71 but Top long rail of Teapoy wooden.

All as per items ser No 71 but Bottom rail of Teapoy wooden

Prepration of surface of teapoy wooden with fixing all loose wooden parts of furniture and applying two coat french polish on all exposed surface of teapoy wooden complete all as specified and directed.

Table 1520x860x760 mm FD-280 : Taking out of old unserviceable top of table 1520x860x760 mm and S & F new top of 1520x860x760 mm including 4mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable legs of table 1520x860x760 mm and S & F new legs of table 1520x860x760 mm including all wood work surface shell be one coat of wood primer except where painting is indicated in drg. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & crecks, rest all as per shown in drawing complete all as specified and directed.

All as per items ser No 76 but long rail of Table 1520x860x760 mm

All as per items ser No 76 but short rail of Table 1520x860x760 mm.

All as per items ser No 76 but stiffner of Table 1520x860x760 mm

All as per items ser No 76 but Bracket of Table 1520x860x760 mm

Prepration of surface of Table 1520x860x760 mm with fixing all loose wooden parts of table and applying two coat french polish on all exposed surface of Table 1520x860x760 mm complete all as specified and directed.

Bed Ply wood top (FD-246/247):- Taking out of old unserviceable ply wood from bed ply wood top and S & F new ply wood 12mm thick, ISI marked commarcial BWR quality bonded with phenol fromaldehyde on bed ply wood top rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable head rest of bed ply wood top and S & F new Head rest with short rail of plywood top. head rest made of commercial ply wood 4 mm thick (both side i.e. Inside & outside)with teak wood beading 35mm wide and 6mm thick around of the head rest, rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable foot rest of bed ply wood top and S & F new foot rest with short rail of plywood top. Foot rest made of commarcial ply wood 4 mm thick (both side i.e. Inside & outside)with teak wood beading 35mm wide and 6mm thick around of the head rest, rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable long rail of bed ply wood top and S & F new long rail of plywood top including all wood work surface shell be one coat of wood primer axcept where painting is indicated in drg. Legs should be made of 1 st class hard wood well seasoned (Teak wood) free from all knots & crecks, rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable wooden short rail of Bed ply wood top and S & F new short rail of bed ply wood top including all wood work surface shell be one coat of wood primer. short rail should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable wooden legs of Bed ply wood top and S & F new legs of bed ply wood top including all wood work surface shell be one coat of wood primer. Legs should be made of 1 st class hard wood well seasoned (teak wood) free from all knots & creck, rest all as per shown in drawing complete all as specified and directed.

Table without Drawer (900 x 600 x 760mm) (FD-55(M)) : Taking out of old unserviceable top of table without drawer (900 x 600 x 760) mm and S & F new top of Table without drawer (900 x 600 x 760)mm encluding 4mm thick teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board bonded with phenol fromaldehyde one side decorative type other side balancing white, rest all as per shown in drawing complete all as specified and directed.

Taking out of old unserviceable legs of table without drawer (900 x 600 x 760mm) and S & F new legs of table without Drawer (900 x 600 x 760mm) including all wood work surface shell be one coat of wood primer except where painting is indicated in Drg. Legs should be made of 1 st class hard wood well seasoned (Teak wood) free from all knots & crecks, rest all as per shown in drawing complete all as specified and directed.

All as per items ser No 89 but top (long) rail of table without drawer (900 x 600 x 760mm).

All as per items ser No 89 but top (short) rail of table without drawer (900 x 600 x 760mm).

All as per items ser No 89 but but Lower rail of table with drawer (900 x 600 x 760mm).

Prepration of surface of table without drawer with fixing all loose wooden parts table and applying two coat french polish on all exposed surface of table without drawer complete all as specified and directed.

Desk and Chair for Single Student of overall size Make Durian:- Taking out old unserviceable MS conduit pipe & PGI sheet part of Desk and Chair for Single Student of overall size and S&F new MS conduite pipe (25x25x2mm thick) & PGI sheet (1mm thick) part on the same place by welding. All loose MS part of Desk and Chair for Single Student of overall size will be fixed by welding and nut bolt including one coat of synthetic enamel painting of all steel surface complete all as specified and directed.

Taking out of old unserviceable top and seat of desk and chair for single student of overall size make durin S & F new top of desk encluding 4mm thick half round teak wood beading alround of top. Top should be made of 18/19 mm thick pre laminated particle board (Blue colour) bonded with phenol fromaldehyde one side Blue colour type other side balancing white, rest all as per shown in drawing complete all as specified and directed.

M&L for preparing old painted steel surfaces of Desk and Chair for Single Student of overall size Make Durian and applying one coat of synthetic enamel paint (OG) to all internal and external surfaces of Desk and Chair for Single Student of overall size Make Durian complete all as specified and directed.

GLOBAL ENGINEERS AND INNOVATORS

AMIT RISHABH BUILDERS PVT LTD

Pleiad Complex On