Setting, renovation and providing other infrastructure for the Sub-Regional Head Quarter HSPCB Office at Housing Board Complex, Saraswati Vihar, Chakkarpur, MG Road, Gurugram

Amount

Dismantling tile work in floors of building and toilets laid in cement mortar including stacking material within 50 metres lead and disposal to C&D plant

Dismantling of false ceiling of building and disposal to C&D plant.

Providing and laying vitrified floor tiles including toilet walls and floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required- 1 run of cable

Supply, Installation, Testing and Commisioning of Surface mounted luminaire with HE-High Efficiency LED (Light Emitting Diode), system power: 20W, luminous flux of luminaire 1540 lm, colour temperature of 4000K, CRI>80, SDCM 3,MacAdam 3,230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, direct light emission, luminaire profile powder coated white, Satin diffuser for homogenous light distribution, ZHLS(ZERO HALOGEN LOW SMOKE) internal wiring, integral electronic control gear,Protection class I, IP20 L = 1200 mm, B = 53 mm, H = 80 mm,

Supply, Installation, Testing and Commisioning of Surface Mounted luminaire with HPE (High- Performance Efficiency) LED (Light Emitting Diode) system power: 15 W, Luminous flux of luminaire 1000 lm, Colour temperature of 4000 K, neutral white, CRI > 80, 230 V constant current driver, 70 % of luminous flux after 50,000 operating hours, Energy-efficient LEDs, Direct light emission, Luminaire profile in aluminium, Polyester powder white coloured coat applied over a 5- stage pre-treatment, snap-fit satin diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW SMOKE) internal wiring, Electronic control gear, Protection class II, IP 40, L = 600 mm, B = 35 mm, H = 50 mm.

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/ Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger, socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp & hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete 1:2:4 complete as required. 32 mm dia.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete in all respects. Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser

Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps.

Supply of ISI marked domestic exhaust fan plastic ideal for mounting on glass window with 200mm sweep (Havells Cat No. Ventilair DX 200mm sweep or equivalent)

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65- 90 mm including all accessories complete in all respect as per the directions of engineer incharge a) 300x 300 x 65-90 mm

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the intersection of raceways supplied completely with base and cover plates, height adjustable junction box 65- 90 mm including all accessories complete in all respect as per the directions of engineer incharge b) 225x 225x 65-90 mm

Supply and fixing of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium Conductor Cables : Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked. a) 4 C x 25 Sqmm XLPE cable

Providing and fixing Stainless steel satin finish SS 304 grade Handles with SS screws for wooden doors of approved make and model all complete as per the directions of Engineer-in-charge 300mm

GLASS FILM Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL- effect film to reproduce Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4 pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) must be endorsed by 3M India Limited Architectural Market Department. Contractors payment wouldn't be released until & unless he/she produces orginal warranty certificate from the manufacturer.

50MM THICK GI FRAME (FOR THICK PARTITION) for MDF : Providing and fixing metal system up to ceiling height, which includes frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 GSM, consisting of Boral U track 52mm wide having equal flanges of 30mm and 0.55mm thick (Base metal thickness) fastened to the floor slab and ceiling soffit using rawl plugs with screw at 600mm centers, with first & last fixing point at not greater than 50 mm from either end. Boral C studs 50mm wide having one flange of 34mm, other flange 36mm, lip size 6 mm and 0.55mm thick installed perpendicularly within the flanges of floor and ceiling channels located directly opposite to each other at not more than 610mm centers. Maintain 5 to 10mm gap between C Stud and web of U Track.

Providing & Fixing of GI Clip in perforated Metal Ceiling System of 300x1200 mm module which includes providing and fixing wall angle of size 20x20 mm made of 0.4 mm thick & 35 x 75 mm made of 0.5 mm pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screws at 300 mm centre to centre, suspending the main C carrier of size 10x50x10 mm made of G.I steel 0.7 mm thick from the soffit with help of soffit cleat 37x27x25x1.6 mm, rawl plugs of size 38x12 mm and C carrier suspension clip and main carrier bracket at 1200 mm c/c. Clip in profile main runner having height of 40 mm and width of 19 mm made of GI steel 0.5 mm thick is then fixed to the main C carrier and in direction perpendicular to it at 600 mm centres with help of suspension brackets & with L profile size of 24x24x0.40mm. Wherever the main C carrier and Clip in Profile have to join, C carrier and Clip in Profile connectors have to be used, fixing with clip in tiles into Clip in Profile with : GI Metal Ceiling Clip in perforated (1.8mm dia) Beveled edge global white color tiles of size 300x1200 made out of 0.5 mm thick Galvanized Sheet Tegular edge with 8 mm drop; and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.7, electro atically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and

Providing & Installation of Baffle ceiling system comprises of 50 mm x 100 mm (50 mm width & 100 mm Height) U Shape panels in RAL color finish. Panels shall be made of 0.5 mm thick galvanized steel after Powder-coated and length up to 4000 mm. Panel shall be high corrosion resistance and good color stability. Centre to Centre panel gap will be 150 mm. Panels are fixed on to roll formed carriers 20 mm wide x 40 mm deep out of 0.80 mm G.I sheet Powder-coated color with cutouts to hold the panels in module of 50 mm at maximum 1200 m c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized steel wire rod hanger with special height adjustment suspension clip at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and nylon inserts. Panels are factory cut in lengths up to maximum 4.0 m to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, dado, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 1200x600 mm

WALLPAPER : Providing & Fixing Vinyl Coated Wall covering as per approved make and pattern as approved by the client & architect.

Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per sqm, Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2 .The tear resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for quick, easy and safe installation, molded plastic with steel spring support and inserted into the tube end. It shall be driven by a ball chain pulley with ball chain and can be positioned at right side or left hand side of the Shade. The Shade when lowering or raising, shall be automatically locked in position upon release of the ball chain by means of a built in friction lock. Universal clutch for left and right hand operation. Chain Gear Ratio of 1.75:1.The END PLUG shall be molded of plastic with a steel location pin. The plug shall be inserted into the tube end. (Opposite to the Drive Unit) for ease of installation. The SUPPORT BRACKETS shall be of coated steel & provided with covers and used in right hand or left hand positions differentiated by the acceptance of the of the rectangular drive unit support or the round idler plug pin. Can be installed (a) On Face

Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

Providing and fixing 4mm thick coir veneer board, ISI marked IS: 14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete.

12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand)

Providing and applying cement based putty of 1mm thickness over plastered surface to prepare the surface even and smooth complete.

Providing and applying plaster of paris 10mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing & Fixing decorative high pressure laminated sheet of plain/ wood grain in gloss/ matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.5 mm thick

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

P&F brass 100 mm mortice latch and lock with six levers with pair of handle

P&F aluminium hanging door stopper complete

P&F aluminium tower bolts with necessary screws:Size 600 x 10 mm Door

Providing and fixing 12 mm thick frameless toughened glass door shutter and partition of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper and floor spring machine etc.to be paid separately).

Providing and fixing aluminium tubular handle bar 32 mm outer dia, 3.0 mm thick & 600 mm long with SS screws etc .complete as per direction of Engineer-in-Charge. Powder coated minimum thickness 50 micron aluminium tubular handle bar

Providing and fixing double action hydraulic floor spring of approved brandand manufacture conforming to IS : 6315, having brand logo embossed onthe body / plate with double spring mechanism and door weight up to 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge With stainless steel cover plate minimum 1.25 mm thicknes

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 32mm

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast (spun) iron pipes and making good the same with cement concrete 1 :3:6 ( 1 cement : 3 coarse sand :6 graded stone aggregate 12.5 mm nominal size), including necessary plaster and pointing in cement mortar 1 :4 (1 cement : 4 coarse sand) : 100 mm dia

Cutting holes up to 30x30 cm in walls including making good the same: With common burnt clay non- modular bricks

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. 20 mm nominal outer dia Pipes

Providing and fixing white vitreous chinaware extended floor mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous chinaware cistern / PVC cistern (with brass fitting) into the wall with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete

Providing and fixing toilet paper holder: C.P. brass

Providing and fixing in position C.I. plain Nahani Trap conforming to I.S.I. specifications and of self cleaning design with C.P. brass hinged grating with frame complete With 75 mm internal diameter outlet

Providing and fixing white vitreous chinaware battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge

Providing and fixing Stainless Steel A ISi 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink with drain board 510x1040 mm bowl depth 250 mm

Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe Group C

Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch Group C

Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required Group C

telephone socket outlet

TV antenna socket outlet

Blanking Plate

RJ 45 Computer DATA socket outlet for CAT 6 or CAT6e cable, Modular type

USB Charger, 1000mA, 5V, 1 Module ( For Non residential use only)

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects 1 & 2 Modules including combined plate for Telephone and data

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects 3 Module

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects 4 Module

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects 6 Module

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects 8 Module

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects 12 Module

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 3 run of Size 1.50 Sqmm(1/1.40mm)

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 3 run of Size 2.50 Sqmm(1.1.80mm)

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 6 Sqmm(1/2.80mm)

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 1 run of Size 10 Sqmm(1/3.50 mm)

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. Supply and erection of blanking sheet in existing distribution board.

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 8 way (8 incoming 3-phase x 8 outgoing)

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. Vertical TPN DB Double Door 12 way (8 incoming 3-phase x 12 outgoing)

Providing and fixing outdoor duty Ply of 12 mm thick frame suitable for exhaust fan up each 287 to 450 mm sweep etc complete as required

Supply and erection of PVC CONDUIT ISi marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. 32mm

Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in existing MS/PVC Conduit etc as required. 3 run of Size 1.50 Sqmm(1/1.40mm)

Providing & Fixing Carpet Flooring properly applied using approved adhesive complete.

Applying one coat of lacquer/primer followed by one or two coat of colour polish to give desired shade and two to three coats of melamine sealer to give final shade including the coats of wood healer and sanding the surface wherever required al complete.

Providing and fixing Urinal Partition Plate

Providing and fixing soap dispensor

Providing and fixing C.P. brass Towel Rail of standard design and of approved make.

Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead up to 10 km for all lifts, complete as per directions of Engineer-in-charge.

PVC WALL PANELLING : Providing & Fixing PVC Wall panelling as per approved make and pattern as approved by the client & architect.

WPC WALL PANELLING : Providing & Fixing WPC Wall panelling as per approved make and pattern as approved by the client & architect.

Synthetic grass as per approved make and pattern as approved by the client & architect.

Providing and fixing granite stone on top in toilet as approved by Engineer Incharge

Ankur Interiors

CHAHAL CONSTRUCITON COMPANY