Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹50.4 LAccepted-AOC AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L1 | Accepted-AOC Lowest quoted tenderer | |
| 2 | L2₹51.2 L+₹63,240 (1.25%)Rejected-Finance A 1 DEEPMALA BUNGLOW CADILLA ROAD GODASAR AHMEDABAD CITY | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹82.2 L+₹31.7 L (62.6%)Rejected-Finance FLAT NO 101 UGF FRONT LHS RZ B 49 A GALLI NO 09 KAILASHPURI PALAM COLONY NEW DELHI 110045 | NEW DELHI | NEW DELHI | DELHI | 110045 | L3 | Rejected-Finance Other than lowest quoted tenderer | |
| 4 | Rejected-Technical | - | Rejected-Technical Not recommended due to not meeting criteria as per NIT |
Tender Value
Refer Docs
EMD Value
₹1.6 L
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Allahabad
HQ CWE New Cantt Allahabad
REPAIR /MAINTENANCE OF ROAD IN STATE/TECH AREA AT CHHEOKI UNDER GE (WEST) ALLAHABAD.
2022_MES_562098_2
81720/W/E8
Open Tender
Civil Works
Item Rate
180 days
Allahabad
Please refer Tender documents.
6 documents required · 6 mandatory
₹1,000
GE (West) Allahabad
₹1.6 L
Yes
13 Feb 2023
12 Dec 2022
4 Jan 2023
13 Dec 2022
2 Jan 2023
19 Dec 2022
Amount
M&L for repair to potholes any depth, not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good complete all as specified and directed.
M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 5 Kg per Ten Sqm on black top road surface and applying 30mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 tonne power roller complete all as specified and directed. NOTE: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.
M&L for preparing WBM surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc. and applying evenly a priming / tack coat with paving bituminous primer VG-10 grade @ 10 Kg per Ten Sqm on WBM surface and applying 40mm thick (consolidated thickness) bituminous premixed semi dense asphaltic concrete with 5.5% paving bitumen binder content VG-30 Grade by weight of total mix, rolled and compacted to required camber and gradient to a uniform smooth surface with 8 to 10 ton power roller complete all as specified and directed. NOTE: (i) Bituminous premix asphaltic semi dense concrete work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to Government. (iii) Premixing shall be done by using Hot Mix plant and laying shall be done by using mechanical paver. complete all as specified and directed.
M&L for bituminous macadam with 100-120 TPH hot mix plant producing an average output of 75 ton per hour using crushed stone aggregete of specified grading premixed with bituminous binder VG-30 grade @ 4% by weight of total mix transporting the hot mix and filler to work site, spreading and laying with a hydrostatic mechanical paver and roller to required camber/ gradient rolled and compacted to smooth uniform surface with vibratory and tandem 8 to 10 ton power roller to achieve desired compaction (consolidated thickness not exceeding 75mm thick) complete all as specified and directed.
M&L in repair for continuous burnt clay old size brick sub class 'B' of edging with width equal to the width of the brick, laid dry on end vertically complete all as specified and directed.
M&L for 150mm thick (spread thickness) soling or sub base with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber using 8 to 10 tonne power road roller complete all as specified and directed by Eningeer in Charge.
M&L for 150mm thick (compacted thickness) WBM with coarse aggregates of grading 2 (63 to 40mm size) or grading 3 (50 to 20mm size), in two layers of 75mm thick each using granite, trap or basalt stone aggregate, spread, rolled and consolidated to gradient and camber required using 8 to 10 tonne power road roller complete all as specified and directed by Engineer in Charge.
M&L for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes arrows etc and the like not exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as manufacturers instruction and specified and directed. Make: Asian/ Nerolac/ Berger Paints. NOTE: Thermo plastic paint material shall consist homogeneously composed of pigment, resins and glass reflecto rizing beads in required proportion as per MORTH specification and conforming to relavent IS.
S&F solar cat eye aluminium alloy shall (100% water proofing design according to 65) of size 125mmx125mmx25mm (stank 65mm) A high efficiency mono crystalline solar panel 2.4V/0.3 Watt on NI-ed rechargeable battery (1.2V/1600MA) consisting to super bright LED with 10,000 to 18,000 med completed as per manufacturers instructions etc all as specified and directed.
S&F in repairs Heavy duty delineator with reflective tap bands made out of MS pipe of 55mm dia wall thickness in 3mm. Length of the delineator is 1000mm. MS pipe duty powder coated. Top cap 100mm dia fitted with MS bolt. Anti Theft net 360mm length and bottom dia of the net is 100mm. Reflective tape bands 1 No Red colour, 1 No amber colour & 1 No Green colour and 2 Nos in white colour. All bands are highly reflective type XI or type IV grade. Three bands of reflective tape 2 inch width red, amber & Green & 2 bands of 1 inch width white reflective tape including necessary excavation and earthwork and fixed in PCC (1:2:4) type B1 of size 300mmx300mmx300mm complete all as specified and directed.
S&F in repair speed bumps high resistance to severe impacts and hard weather conditions made of sturdy plastic (black/yellow colour) & UV Stabilizers, studded with reflectors on either side complete all as specified and directed.
S&F in repair ABS Engineering plastic stud dynamically designed having high impact strength & fitted with 2 Nos highly reflective reflectors on both sides. The stud has ba stem which is fixed by drilling a hole fixed on roads complete all as specified and directed.
A ONE ENGINEERING
HIND CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .