Construction Of Multipurpose Cyclone Shelter (MPCS) in Chalta No. 18 of P.T Sheet No. 122 at Altinho of Panaji City In Tiswadi Taluka, North-Goa

Amount

Felling trees of girth(measured at a height of 1. m. Above ground level) including cutting of trunks and branches removing the roots stacking the serviceable material and disposal of unserviceable material for all leads :

a)Beyond 30 cm and upto 60 cm grith

b)Beyond 60 cm and upto 120 cm grith

c)Beyond120 cm and upto 240 cm grith

Clearing grass and removal of rubbish upto a distance of 50 m outside the periphery of the area

Earthwork in Excavation by Manual or Mechanical means in all types of strata comprising any of the materials such as soil, sand, silt, clay, gravel, moorum of all varieties shingles, pebbles, all types of conglomerates, laterite rock, soft rock, disintegrated or weathered rock, fissured / shattered, decomposed rock and such materials either in full or in parts, as the case may be, adopting any approved method or methods as may be convenient or permitted including chiselling, wedging, etc. but blasting prohibited in all conditions etc such as dry, moist, saturated, submerged, foul conditions, etc. including pumping or bailing out water / dewatering including setting out, construction of shoring and bracing, removal of stump and other deleterious materials, dressing of sides and bottom including getting out the excavated soil and disposal of surplus excavated soil for foundation over areas and trenches for all depths including all leads and lifts, manpower and machinery, materials, labour etc. complete and as directed by Engineer - In - Charge.

Refilling in pipeline/foundation trenches, plinth, plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering with all leads and lifts including disposal of surplus earth etc complete and as directed by Engineer in Charge.

Supplying and filling in pipeline/foundation trenches, plinth, plinth sides, foundation etc.in layers not exceeding 20 cm depth consolidating each layer ramming and watering with all leads and lifts including disposal of surplus earth etc complete and as directed by Engineer in Charge.

Rubble packing with hard laterite stone available on site from excavated pits of foundation and trenches, under floors including watering, ramming and consolidating in pipeline trenches and other foundations etc complete.

Disposal of surplus excavated material(earth) from site lead of 15 km including all loading & unloading charges (a) by tipper truck including loading unloading and stacking .contractor should arrange land for dispose up these material at his own cost.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement. in all sizes in superstructure from floor I level upto floor V level every 4 floors or part thereof.

Half brick masonry usign fly ash bricks in cement mortar 1:3 (1 cement : 3 coarse sand ) with bricks of class designation 40 kgs / cm2.

b) Above plinth upto floor V level 200 x 95 x 95

Providing & laying cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate. 20 mm. nominal size) excluding cost of centering, shuttering and finishing in:

a)All works upto plinth level

Providing and laying upto floor five level cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement: 3 fine sand) including centering and shuttering etc.

b) String courses, copings, bedplates, anchor blocks, plain window sills and the like.

Providing and laying in position ready mixed concrete (RMC) with usage of Ordinary Portland Cement manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead upto 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C., from the transit mixer to the site of laying, excluding the cost of centering, shuttering, finishing and reinforcement including the cost of admixtures in recommended porportions as per IS : 9103 to accelerate/retard setting of concrete, improve workability without imparing strength and durability as per the directions of the engineerin- charge. All works upto floor V level

v) M-30grade of concrete

Centering & shuttering including Strutting, Propping & removal of forms for

i) Foundations, Footings, Bases for columns

ii) Vertical surfaces such as retaining walls, return walls, Partitions, walls (any thickness) including attached Pilasters, Buttresses, Plinth and string courses, Fillets and the like

iii) Columns, Piers, Pillars, Abutments, Posts and struts (square rectangle polygon in plan)

iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, bressumers and Lintels plinth beams not exceeding 1m in depth

vi) Staircases (except spiral staircases) excluding landing

xiii) Suspended floors, roofs landings, shelves & their supports

xiv) vertical or horizontal fins individually forming box louvers or projected bands

Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates

i)Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only

iii)Columns, Pillars, Posts & struts (circular or curved in plan)

Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering and de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams and balconies (plan area to be measured)

Providing Corrosion Resistant Steel CRS-500D bars of (TATA, SAIL, JSW, or equivalent) (Confirming to IS 1786 if 1985) for RCC work including bending, binding & placing in position in all the floors along with factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing & laying damp proof course 25 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 graded stone agg. 10 mm nominal size).

Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth.

Providing and fixing G.I. sheet of 26 S.W.G. for using in construction/Expansion joint wherever necessary as per directions of the Engineer-in-Charge.

Providing and fixing precast reinforced concrete door frames of ASTRA make or equivalent in M25 grade concrete and reinforced with minimum three bars of 6 mm dia and confirming to IS:6523. The frames shall be manufactured in approved factory with all the necessary arrangements for fixing hinges, tower bolts by way of inserted PVC blocks and holes for receiving sliding bolts as specified. Sectional size of frame with single rebate : 60X 100 mm (For all Frame sizes given in the drawing)

Providing and fixing flush door shutter (35 mm thick) of solid core melamine face three layered, prelaminated (double shade) wood based particle board exterior grade having shade of choice on both sides (PTX) or having shade of choice on one side and balancing lamination on the other side (PLX) as per IS 3087 (1985) type I on the edge of Novopan or equivalent bonded with BWR/BWP synthetic resin with second class teak wood, lipping of section of size 12 mm x 30 mm flange and 18 mm x 10 mm web (18 mm deep) fixed into 18 x 10 mm groves of shutter with water resistant adhesive and fully threaded G.I. screws 50 mm not more than 450 mm centre to centre including anodized aluminium butt hinges with vision panel not exceeding 0.1 Sqm area of 6 mm thk clear glass or frosted glass as per architectural drawing with necessary screws etc. complete.

Single Colour Foam Core FRP (Fiber Reinforced Polymer) Door Shutter Manufacture, Supply and Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wood styles for Top rail and lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) . The core of shutter will be filled as specified (Expanded Polystyrene Foam / Polyurethane Foam (EPS/PU) Foam). The shutter to be of single colour & water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2008 certified factory.Accessories:i) S. S. Hinges 4” - 3 Nos,ii) S. S. Latch - 1 No,iii) Tower Bolt 5” - 2 Nos, vi)Handle 5” - 2 Nos, Shutter thicknessb) 35 mm thick

Providing flat iron hold fast 40cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size.)

a) 40 x 3 mm flat iron hold fast 40 cm long

Providing flat iron hold fast 15cm including fixing to frame with 10 mm dia bolts, nuts and wooden plugs and embeded in cement concrete block 30 x 10 x 15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 stone aggregate 20 mm nominal size.)

Providing and fixing 150 mm chromium plated brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete.

Providing and fixing chromium plated brass tower bolts (barrel type) with necessary screws complete

Providing and fixing chromium plated brass handles with necessary screws etc complete

Providing and fixing bright finished brass door latch with necessary screws etc complete

b) 250 x 16 x 5 mm

Providing and fixing chromium plated brass sliding door bolt with bolts , nuts and screws etc complete

Providing and fixing first class Indian teak wood moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surfaces etc.

FRP (Fiber Reinforced Polymer) Frames Manufacture, Supply and Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint and FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) and unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door.. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2008 certified company. specified cross section

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: windows with three sliding shutters using 18 mm series shutters section with powder coating with pure polyester powder of shade of required colour on the aluminium section in plain glass.

Providing and fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge: Adjustable louvered windows in plain glass with powder coating with pure polyester powder of shade of required colour on the aluminium section.

Providing and fixing M.S. grill of required pattern in wooden frames of Windows etc. with M.S. flats square or round bars with round headed bolts and nuts or by screws.

a) Ornamental grill

Supplying and fixing rolling shutters of approved make, made of 80 x 1.25 mm M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs grade No.2, ball bearings and M.S. top cover of 1.25mm thick for folling shutterstop cover and spring.

Providing and fixing in position S.S. hand rail in main stair case, and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials, etc. complete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of approved make (Min Yield Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

Steel work welded (SAIL, TATA. VIZAG or Equivalent & using electrodes of Ador or ES4B or Deh Secheron or Equivalent make)in built up sections trusses and framed work including cutting, hoisting, fixing in position( In tees, angles, flats and channels.)

Providing & fixing Pre-fabricated sliding compound gate as per the drawings with structural steel of hollow rectangular/square/circular section of TATA/JSW or equivalent make including providing & fixing locking arrangemnts & applying primimng coat with ready mixed red led paint and painting two or more coats with superior quality ready mixed paint of approved brand and manufacture in all shade as directed by Engineer-in-Charge, etc complete.

Providing and fixing vitrified antiskid tiles (320 x320) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete .

Providing and fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria or equivalent)conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand ) and jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade complete. Wall ceramic glazed tiles (300x450)

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of jet black shade, area of slab over 0.50 sqm with 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, and extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite/Cuddapah stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete as directed by engineer incharge.

Providing and fixing Granite stone slabs (mirror polished) 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete .

c) Elite Brown

Rounding of edges of stone slab of like granite, kotah, shahabad to semicircular slope including cleaning, polishing of surface etc complete.

Providing and fixing vitrified matt finished (600 x 600) and 10mm thick tiles in floor, treads of steps, landing on 25mm thick bed of cement mortar 1:3 and jointed with cement slurry complete .

Providing 25 mm thick cuddapah slabs machine cut and polished on either side in partitions including making necessary grooves in the wall and fixing with cement mortar, complete as directed by the engineer-in-charge

52mm thick cement concrete flooring with metallic concrete hardener topping, under layer of 40 mm thick cement concrete 1:2:4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layers 12 mm thick metallic cement hardener constituting of mix 1:2 (1 cement: 2 graded stone aggregate 6 mm nominal size by volume with which metallic quality is mixed in ratio 4:1 (4 parts of cement: 1 part of metallic) hardening compound of approved floor hardening compound of approved quality) by weight, including finishing complete.

Providing and fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average ) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete.

Providing and laying vitrified unglazed porcelain tactile floor tiles in different sizes of Johnson, Somany, Kajaria or equivalent (thickness to be specified by the manufacturer) and conforming to IS:15622 of approved make in colours and shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigment etc., complete

a) 300 x 300 mm Design - Liner

b) 300 x 300 mm Design - Buttons

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

a) 20 mm thick.

Providing and fixing Jaisalmer stone flooring 18mm thick in risers of steps, skirting, dado and pillars laid on cement paste and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing and rounding of edges, complete as directed by engineer Incharge.

Providing water proofing treatment over the new R.C.C. roofs terrace or on toilet / bathroom by spreading cement slurry over the R.C.C. slab and laying of 10cms. Average laterite stone ballast coba with the necessary gradient for easy flow of rain water and the coba in covered with damp proof of Hindustan water proofing co. Or equivalent jointless water proofing plaster of mix 1:3 ( 1 cement : 3 fine sand), finished smooth with wooden trowel with false marking of 30 cms square. The vertical surface of the adjoining walls are to be treated upto a height of 30 cms including rounding of junction (the rate includes for complete items including labour and materials and including cost of initial treatment of roof slab as follows. The injunction of damp proof or equivalent compound with cement solution will be given as and when found necessary for filling honey comb, cracks etc. in the R.C.C. slabs). NOTE: cement consumption 25 kg /sq.M.

Providing and fixing colour coated galvulium roofing sheets of 0.5mm thickness including all the accessories (TATA make or equivalent) but excluding the cost of purlins, rafters, trusses, flashings etc. complete as per the directions of the Engineer in charge.

Add for providing & fixing Flashings -[Corners, Ridges, valleys, gable end & Trims] (Girth upto 610mm) including all the accessories complete as per the directions of the Engineer in charge

Providing and fixing Prince or equivalent make PVC SWR half round eaves gutter with bolts, nuts and flat iron brackets 40 x 3 mm size complete.

c) 250 mm nominal size

Extra for providing and fixing prince or equivalent make PVC SWR joint bracket with 2 clamps for socketed half round eaves gutters.

c) 250 mm nominal size

Extra for providing and fixing prince or equivalent make PVC SWR short stop ends for socketed half round eaves gutters.

c) 250 mm nominal size

12mm cement plaster 1:4 (1 cement : 4 fine sand)

Providing and applying white cement based putty of average thickness 1.00mm of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand)

Neat Cement punning

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

18mm thick molded cement mortar bands in cement mortar 1:4 (1 cement : 4 fine sand) cm per meter

Providing and applying two coats of High Albedo paint having minimumSolar Reflective Index (SRI) 108 (with solar reflectance & thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall strictly as per manufacturer’s specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., washing with water all complete. The contractor shall give guarantee for the perfomance of SRI and also the durabitity of coating, all complete as per direction of Engineer-in-incharge.

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. - 2 coats

Providing and applying 2 coats of Anti-corrosive, chemically resistant coal tar extended epoxy coating system for below & above waterline application (Normal Wet & Underwater Application) (EPCO-2020-TX) having an adhesion of minimum 3.0 N/mm2 (ASTM-D-4541) and a DFT of 300-350 microns in 2 coats and having excellent chemical resistance against acids, alkalies and salts. Incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.

Painting (two or more coats) with synthetic enamel paint of approved brand and manufacture in all shade or new work over and under coat of suitable shade with ordinary paint of approved brand and manufacture to give an even shade.

Applying priming coat with ready mixed primer of approved brand and manufacture on wood work complete.

Applying priming coat with ready mixed primer of approved brand and manufacture on steel work.

Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in ratio of 2: 1 by volume (2 parts or stacked volume of earth after reduction by 20% and 1 part of stacked volume of manure after reduction by 40%) flooding with water, dressing including removal of rubbish & surplus earth if any with all leads & lifts (cost of manure or sludge of extra good earth if needed to be paid for separately)

Holes 1.2m dia and 1.2m deep

Supplying and stacking of good earth at site including royalty and carriage upto 1 km. (earth measured in stacks will be reduced by 20% for payment).

Spreading of sludge, dung manure or/and good earth in required thickness (cost of sludge, dung manure or/and good earth to be paid separately).

1) Grassing with “doob” grass including watering and maintenance of the lawn for 30 days or more till the grass forms of thick lawn free from weeds and fit for moving, including supplying good earth if needed. ( Cost of “doob” grass not included )

c) 3) In rows 5 cm apart in either direction

Providing and fixing M.S. flat iron tree guard 60cm dia & 2 m high above ground level, formed of 4 nos. 25 x 6mm and 8 nos. 25 x 3mm vertical M.S. flat iron rings in two halves, bolted together with 8mm dia and 30 mm long bolts including painting two coats with paint of approved brand and manufacture over a coat of priming, complete in all respects.

Filling mixture of earth & sludge or manure in the desired proportion in trenches flooding with water and leveling (cost of supplying earth and sludge of manure and mixing excluded).

1. Forxtail palm 3 m ht & 0.075 m atleast Girth

2. Pongamia pinnata 2.4 m ht & 0.075 m atleast Girth

3. filiciun decipiens 3 m ht & 0.075 m atleast Girth

4. Caryota urens 3 m ht & 0.075 m atleast Girth

Supplying of laterite stone soling of size 150-200 mm size and murrum having P.I. Value not more than 6 and laying including packing with smaller stones and consolidation with power road roller including spreading, watering and consolidation of binding material etc.(Measurements shall be considered on finished item) .

Providing and laying factory made Shot blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction and of aprpoved size and design / shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineer.- in I, Wave, Rectangular, Square etc. shapes. The products should comply to IS 15658:2006 and manfucatured by ISO9001: 2008 certified plant. The shot blasting should be done using 0.4-0.5mm dia steel shots with a speed of 3200 rpm.

a) 60 mm thick in all colours except grey (M35 grade)

Supplying and fixing C.I cover with frame for manholes:445x610 mm rectangular C.I. cover (light duty) weight of cover to be not less than 23 kg.

Providing and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 5 litres PVC Automatic flushing cistern (of approved make) with all fittings and fixtures confirming to IS 7231 and mosquito proof couplings of approved municipal design and nylon pull complete cutting and making good the walls and floors where required

Orrisa pattern W.C Pan

Providing and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 5 lts. PVC automatic flushing cistern (of approved make ) with all fittings and fixtures confirming to IS 7231, and mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls and floors where required

b) W.C. pan with white plastic seat and lid.

Providing and fixing vitreous china wash basin with RS or CI brackets painted white , 15 mm C.P brass pillar taps C.P brass chain with rubber plug 32 mm C.P brass waste of pattern , 32mm diameter M I or C P brass trap and union complete including cutting and making good the walls where required.

a) Flat back wash basin size 630 x 450 mm with a pair of 15mm C.P brass pillar taps.

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 including cutting of stone and making good the walls wherever required. Kitchen sink without drain board. with coupling & all accessories complete with choke stop strainer, Plain type having flat borders for correct sandwithing between the plaform top and bottom slabs complete.

a) Overall size 610mmx510mm (24"x20") bowl size 545mmx445mmx200mm (21 1/2"x171/2"x8") depth 200mm Glossy. 1.0mm thk,

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 1500x450 mm

Providing & fixing 600 x 120 mm glass shelf with C. P. brass brackets and guard rail complete fixed to wooden cleats with C. P. brass screws.

Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws

b)600 x 20 mm size

Providing and fixing toilet paper holder

b)C.P Brass

Providing & fixing soap dish chromium plated with brackets fixed to wooden cleats with CP brass screw.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Concealed work (medium duty SDR 13.5pipe) including cutting chases and making good the walls etc

a)15 mm nominal outer dia pipe

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings CPVC solvent cement ,trenching refilling an testing of joints complete as per direction of the Engineer in Charge.(External work(heavy duty SDR 11 pipe)

b) 20 mm nominal outer dia pipe

c) 25mm nominal outer dia pipe

d) 32mm nominal outer dia pipe

e) 40 mm nominal outer dia pipe

Providing and fixing enclosed type water meter (bulk type) conforming to IS : 2373 and tested by Municipal Board complete with bolts, nuts, rubber insertions etc. of 80 mm dia nominal bore. Then, fixing of water meter & stop cock in existing (PP-R/UPVC)Pipe line including cutting & treading the pipe and making long screw etc. complete

Providing and fixing brass Full way valve (heavy) duty with wheel of approved quality.

e) 40 mm nominal bore .

d) 32 mm nominal bore .

c) 25 mm nominal bore .

b) 20 mm nominal bore .

Providing and fixing non-return valve of approved quality :

c) 40 mm nominal bore

a) 25 mm nominal bore

d) 50 mm nominal bore .

Providing and fixing square-mouth S.W. gully trap grade ‘A’ complete with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard design :

a)100 x 100 mm size –P type

Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1: 5 (1 cement : 5 fine sand) R.C.C. top slab with 1: 1 1/2: 3 mix (1 cement: 1 1/2 coarse sand ; 3 graded stone aggregate 20mm nominal size foundation concrete 1: 1 1/2 :3 mix (1 cemet ;1 1/2 coarse sand :3 graded stone agrregate 20mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 :2: 4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design.

b) Inside size 90 x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)

c) Inside size 1.2m x 90 cm and 90cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter total weight of cover and frame to be not less than 116 kg. (weight of cover 58 kg).

d) Inside size 60 x60 cm and 60 cm deep including C.I. cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 kg. (weight of cover 23 kg.)

Providing and laying and jointing glazed stone wear pipes grade "a" with stiff mixture of cement mortar in the proportion of 1:1 (1cement:1fine sand) including testing of joints etc . Complete

b) 150mm dia.

Providing and fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketed:

b)75 mm dia

a)110 mm dia

Providing and fixing rigid PVC bend of required degree (of approved make) for S.W.R. drainage pipes of approved including lubricating.

a)110 mm dia

b)75mm dia

Providing and fixing rigid PVC bend (approved make ) for S.W.R. pipes including lubricating etc complete bend with door :

b)75mm dia

a)100mm dia

Providing and fixing NICKEL chrome plated copper alloy Fancy long body bib cock with wall flance Jaquar make or equivalent. Confirming to IS 8931;1993

15mm nominal bore

Providing and fixing NICKEL chrome plated copper alloy Fancy CONCEALED STOP COCK WITH SLINDING FLANCE 15MM Jaquar make or equivalent. Confirming to IS 8931;1993

15 mm nominal bore

cutting chase in brick masonry walls for fixing 100 mm diameter sand cast iron pipes & making good the same with brick work in cement 1:3 (1 cement: 3 fine sand)

Providing and fixing m.s stays and clamps for sand cast iron spun pipes and fitting of dia:

Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, without door

Providing and fixing ball valve (brass) of approved quality :

a) High pressure with P.V.C. floats:

3) 25mm nominal bore

Providing and fixing P.V.C. connection pipe with brass unions 15 mm nominal bore:

b) 37.5 cm (15”) length .

c) 45 cm (18”) length .

Making soak pit. 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm diameter, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design.

Providing and fixing R.P.V.C. vent cowl:

a)110 mm dia

b)75 mm dia

Providing and placing on terrace roof of floor two (1st floor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.c) 1000 litres capacity. Extra for placing polythene tank on roof of floor three (2nd floor roof)

c) 1000lit. capacity

Providing and placing on terrace roof of floor two (1st floor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.

b) 500lit. capacity

Making connection of G.I Distribution branch with G.I Main 50 mm to 80 mm nominal bore by providing and fixing tee including treading the pipe etc. complete

Providing and fixing single tee of rigid PVC (approved make) for S.W.R. pipes including lubricating etc. complete, without door:

a)110 mm dia

b)75 mm dia

Providing and fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :

a)110 mm dia

b)75 mm dia

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door :

a)110 mm dia

b)75 mm dia

Providing and fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993

a)15mm nominal bore

Providing and fixing 3 layer PP-R (Polypropylene Random copolymer) pipes SDR 7.4 UV stabilized & anti-microbial fusion welded, having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings including trenching, refilling & testing of joints complete as per direction of Engineer in charge. (External work)

f) PN 16 - Pipe, 50 mm OD

Providing and fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalent. Confirming to IS 8931;1993

a) 15mm nominal bore

Providing and fixing approved make and model of standard quality vitreous china wash basin- oval shape under counter type of size 550x350x1.90mm with 32mm dia MI or C.P. brass traps and union etc complete as directed by engineer in charge

Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screws

a) Glass container

Providing and fixing NICKEL chrome plated copper alloy Fancy waste coupling 32 mm with 190 mm long connection pipe wall flance Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing NICKEL chrome plated copper alloy Fancy wall mixer with 115mm long bend pipe for connection to over head shower Jaquar make or equivalent. Confirming to IS 8931;1993

a) Wall mixer with 115 mm long bend pipe for connection to over head shower.

Providing and fixing NICKEL chrome plated copper alloy Fancy BOTTLE TRAP ECONOMY TYPE 32MM Jaquar make or equivalent. Confirming to IS 8931;1993

Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet:

b) 150 mm diameter.

Providing & fixing G.I. pipes complete with G.I. fittings including trenching & re-filling etc. (external work).

c) 25 mm nominal bore

Providing and fixing brass bib cock (heavy) of approved quality :

b) 20 mm nominal bore

Providing and fixing brass stop cock (heavy) of approved quality :

c)25 mm nominal bore .

b) 20 mm nominal bore

Providing and fixing ASTM UPVC pipe, conforming to ASTM 2467 with ISO 14001, including all UPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step UPVC solvent cement and testing of joints complete as per direction of Engineer. Internal work - Exposed on wall.

l) SCH-40(blue)/(white)

b) 25mm outer dia.

a) 20mm outer dia.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).

a) 15 mm outer dia CPVC pipe

Providing and fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, without door :

a) 110 mm dia

b) 75 mm dia

Providing and fixing U.P.V.C. pipe clips (approved make ) for S.W.R. pipes :

a) 110 mm dia

b) 75 mm dia

Providing anti – termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) including adopting precautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicating any infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building)

a.Pre-construction

b.Post construction

Providing, fixing and erecting 2.44 metre high temporary barricading as per drawing with structural rolled steel joints of I-section/C-section/T-section/L-section & vertically cladded with 0.60 mmthk corrugated galvanized steel sheets including writting& paintingf the arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape & as directed by the Engineer-in- Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during theexecution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer-in-Charge. (Note :- One time payment shall be made for providing barricading from start of work till completion of work i/c shifting. The barricading provided shall remain to be the property of the contractor on completion of the work).

Supplying and fixing of cautionary/warning sign boards with reflective tape fixed on M.S. angles, tees as per drawing confirming to IRC-67-1977 etc. complete.

Providing and fixing information boards of size (1.5x1.00)m consisting of angle iron post of (75x75x6mm) fixed in cement concrete M15 grade(45x45x60)cm ,60 cm below ground two supporting 1.5 m length of ISA (30x30x5mm) and mild steel plate of (1.5x1.0)m,3mm thick fixed to the angles by welding/bolting etc. including painting with synthetic enamel paint two coats of approved brand and shade over single coat of primer, including lettering transportation etc. complete.

Setting up drilling Rig on the drilling site and its shifting after completion of bore well, drilling 203/150mm.dia bore hole in all types of strata up to a maximum depth of 125mts. and collecting and supplying representative samples of all soil/rock strata encountered during drilling etc. complete. Over burden drilling 203mm.dia. and drilling through rock should be 150mm.dia. complete as per direction of Engineer in charge

Providing 150mm (6’’).dia. G.I. pipes medium grade confirming to IS 1239(Part II)1975 or ISS 554 for casing pipe including socket, coupling etc. complete and lowering the casing pipe in the drilling holes during drilling including fixing the pipes with the socket or welding etc. complete as per direction of Engineer in charge

Development of bore well using air compressor air/back washing for a period of not less than two hours until all fines are flushed out and steady discharge is attended and measured the wells discharge on 90 V notch or with a barrel and stop watch.

Providing and fixing threaded well cap of cast iron/ GI suitable for 150mm (6’’) dia casing pipes bore wellscomplete as per direction of Engineer in charge

Providing, installing, commissioning and testing of submersible pump set of max. 100/142 mm. Dia bearing ISI mark, pump confirming to IS 8034-1976 with overall efficiency of pump being more than 50% & motor conforming to IS 9283/1976 to operate on 415 volts (10%- 15%) three phase, 50 cycle/sec. 2900-3000 RPM (SYN), AC supply suitable for vertical installation in bore/tube well size of 150 mm internal dia. capable of delivering below mentioned discharges against respective dynamic head including all necessary accessories such as strainer guard pressure compensation device standard cable lead, built in non return valve pump motor coupling etc. complete. The impeller should be made of noryl/Glass filled noryl and defuses stainless steel housing and stainless steel shaft having resistance to abrasion For 45 LPM 120 mts. Head complete as per direction of Engineer in charge

Supply, Installation, testing and commissioning of Larsen & Turbo or equivalent made control panel for submersible pump up to 7.5 HP DOL comprising of Starter with Overload relay, single phasing preventer, ammeter ,Volt meter and indicating lamp, On/Off push Button etc.as per direction of Engg in charge complete.

Providing and fixing 4mm (SWG) dia G.I. wire on surface in recess for loop earthing as required and as directed by Engineer in charge

Providing and fixing, testing and comissioning 30 amps metal clad TP&N switch fuse unit 415/500 volts with HRC fuse including drilling holes on the board Connecting and earthing the body etc as required. Category B. as per the direction of Engineer in charge

Providing, fixing & commissioning PVC sheathed submersible cable of size mentioned below suitable for 1 to 10 HP submersible pump sets conforming to IS specifications etc. with necessary cable supporting clamps (Rubberized) for gripping and connecting to switches etc. complete. a) For 100m depth of pumping

Supplying at store/site of work including railway freight, carting loading, unloading, stacking etc .galvanized mild steel continuous weld tubes conforming to IS 1239(part I)1975, with latest amendments Screwed at both the ends as per IS 554 pipe threads, one and fitted with socket other end with plastic protection ring at random length 4-7 mts. Class B e) 40mm nominal bore.

Supplying Laying testing , commissioning and jointing of Rigid PVC pipes conforming to ISO 4411 for Public Water supply at store or site of work including railway freight, carting, loading and unloading stacking, transit insurance etc. complete 6 Kg. sq. CM. 40 mm dia

Making connection from UPVC pipe to PVC pipes by using suitable UPVC adopter and other materials including testing the joint etc. complete 40 mm dia

Providing & fixing cast iron splitting type bore well cap suitable for 150mm dia G.I. casing pipe having holes for inserting cable along with 2 sets of M.S. clamps suitable for 40/50 mm dia. pipes made of 8mm.thick 5 cms. wide 30 cms. long with 4 nos. of nuts and bolts etc.complete.

Providing & fixing flexible alkathine pipe 1” suitable for encasing the cables etc. complete.

Supplying of Ashirwad UPVC OR EQUVALENT, non corrosive column pipes. 60 LPM

Miscellaneous item like, Union joint, GI Nipple, GI elbow, GI socket PVC T and PVC valve etc complete for plumbing work.

Supplying, installing, testing and commisssioning of Kirloskar/Mather & Plate/Jyoti or equivalent centrifugal pump with self priming system capable of delivering 40 LPM against a total static head of 20 m self priming, consisting of starter, main switch indicator lamp, ammeter voltmeter, etc. and connecting at one end with flexiblepipe of suitable diameter with foot valve lowered into the sump tank & other end to UPVC line to lift water to the overhead tank including all accessories such as strainer guard, G.I clamps, bends & tees, controlling valve stc. complete & as directed by The Engineer in charge.

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) with modular switch, modular plates, suitable size modular GI box of specified Category and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

c) Group C -- with Cat A Modular Accessories.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent recessed PVC conduit(heavy) of appropriate size as required.

(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit).

(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit).

(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit)

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch connection painting etc. as required (a) Cat A.

Supplying and fixing suitable size modular GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 15/16 A and 5/6 A modular socket outlet modular socket outlet and 15/16 A modular switch connection painting etc. as required (a) Cat A.

Supply and erecting of 48 inch (1200mm sweep) ceiling fan, double ball bearing type, complete with all accessories (a) Cat A.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (a) Cat A.

Installation,earthing, testing and commissioning of ceiling fan including wiring the down rod of standard length ( upto 30 cm) with 1.5 sq .mm FRFRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized and powder painted including earthing etc. as required ( but without MCB/RCCB/Isolator) (g) 12 way double door Cat A.

Supplying and fixing 6 A to 32 A, C series MCB suitable for lighting and other loads of following poles in the existing MCB DB complete with connections testing and commissioning etc as required

(a) SP, Cat A.

Supplying and fixing following rating double pole 240 V isolator in the existing MCB DB complete with connections testing and commissioning etc as required (a) 40 A, Cat A.

Supply of 4 feet 20 W single box/batten industrial type LED luminaire with CRCA body pre coated in white and pre wired fro LED type complet with all accessories of make Crompton , model no IGP 131LT8-16 or equivalent including 4 feet 20 W LED tube of make crompton and model LTT8 or Equivalent as required.(Equivalent to be aprroved by engineer-in -Charge.)

Supply of 4 feet 20 W double box/batten industrial type LED luminaire with CRCA body pre coated in white and pre wired fro LED type complet with all accessories of make Crompton , model no IGP 132LT8-16 or equivalent including 2 nos 4 feet 20 W LED tube of make crompton and model LTT8 or Equivalent as required.(Equivalent to be aprroved by engineer-in -Charge.)

Installation, earthing, testing and commissioning of pre-wired fluorescent fitting/ compact fluorescent fittings of all types complete with all accessories and tube etc. directly on ceiling / wall including connections with 1.5 sq .mm FRLS PVC insulated copper conductor single core cable and earthing etc. as required.

Supply, installation, testing and commissioning of surface mounted or suspended from ceiling with necessary mounting arrangements round LED fittings 18 watts and above of make Havell's bearing cat No LHEAAGP7IA1WO18, GM bearing cat No. GM0169 18W or Wipro bearing cat no. CRDL11S023HP57or equivalent in Philips, vin, Pharox, Bajaj with 3 years warrany complete as required. The fitting shall be approved by the Engineer in Charge before executing the work.

Supply, installation, testing and commissioning of IP 66 LED street light 5000 K or higher having systme efficiancy of atleast 85% lumen/watt having power consuption of 30 watts or more of make Wipro bearing Cat No: LR02-331-XXX-57-30, Bajaj bearing cat No. BCLST 30W LED or Crompton bearing cat No.LSTP-30-CDL or equivalent in Philips, Pharox, GM, Havells Oreva, vin etc with 3 years minimum warranty and including accessors like mounting pipe complete as required. The fixture shall be finalized by the Engineer in Charge before execution of work.

Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size 4 Core 16 sq.mm.

Supply of 2 core armoured PVC/XLPE insulated, PVC sheathed copper conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I) ,IS:7098(Part I) with latest amendments of following size.

4) 2 Core 6 sq.mm

5) 2 Core 10 sq.mm

Supplying and fixing brass batten/ angle holder including connections etc as required.

Earthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark,of approved brands, including accessories and providing masonry enclosure with CI/RCC cover having locking /lifting arrangement and watering pipe etc. with charcoal or coke and salt) as required as per the Earthing Drawing provided by the Engineer-Incharge.The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 2.0 mtrs(min) and disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs ( paid seperately). d) Refilling the pit of size 1.0x1.0x 2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g)watering arrangement (plumbing will be paid seperately). (b) In rocky strata.

Supplying and laying 25 mm x 5 mm GI strip in 40 mm dia GI pipe from earth electrode as required.

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm in the existing RCC/HUME/STONEWARE Metal pipe, etc. complete as required.

Supplying and making cable end terminations with brass compression gland and copper lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required (5) 4 x 16 Sq. mm.

Supply and making cable end terminations with compression gland and copper lugs for following sizes of PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required.

(3) 2 x 6 Sq. mm.

(4) 2 x 10 Sq. mm.

Supply, installation, testing and commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sheet steel body ( base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only (c) 50 to 100 A.

Supply, installation, testing and commissioning of wall mounted IP54 indoor Control Cubical Panel suitable for operation on 3 phase, 4 wire 440 volts 50hz system. The panel should be flush front, compartmentalized, to allow cable entry from top & bottom, dust & vermin proof complete with interconnections of proper size of wires, busbar wiring etc. The panel should be properly derusted and seven tank processed and painted with Siemens 7032 powder coated paint and constructed of 16SWG CRCA sheets. The Panel should have indicating lamp set, digital voltmeter ammeter (VAF multifunction meter) with switches and control fuses of suitable rating and approved make. The panel should be mounted on suitable angle iron frame. The MCCB’s and MCB’s shall be of make L&T, Siemens, Schneider, C&S or Hager makes only. The panels shall be as following:-

INCOMING 1.63Amps TP MCCB 25 KA in sealed meter compartment- 1 no 2.40Amps Cu busbar 4 strips ---- 1 set. 3. Provision for 3phase meter-----1no. 4. Changeover 40Amps 4pole ---- 1no. OUTGOING 1. 40A TP MCB --- 3 nos. 2. 16A SP MCB --- 3 nos. 3. Provision for 3nos TP MCB's.

DIESEL GENERATOR SET:- SITC of single phase,20 KVA/ 16 KW, Silent Diesel generating set , incorporating Diesel engine, rated at 1500 RPM with power rating 84 BHP, water cooled, four stroke, 4 cylinder with electrical starter motor 12VDC battery with stand and leads, flywheel housing,inlet manifolds and air cleaners,gear type lub oil pump,lubricating oil filter ,lubricating oil cooler,fuel injection system with injection pump, nozzles,fuel filters,turbo charger, engine starting system,starter gear ring,starter motor, battery charging alternator with built in rectifier,engine protection unit for low lub oil pressure and high coolant temperature including solenoid fuel on type with engine instrument panel consisting of hour meter,lub oil pressure gauge,coolent temperature gauge, stop button,battery charging ammeter,battery charging lamp and fuse box with cooling system comprising of radiater ,fan,fresh water pump including exhaust silencer , stainless steel flexible exhaust bellows with end flanges, fuel pipes,first fill of lub oil with illustrated parts list and users manual of make:-MAHINDRA NAVISTAR / CUMMINS 4B3.3TAA G 11 / KIRLOSKAR/ CATERPILLAR/ LEYLAND/ GREAVES . With 20kva coupled brushless,, screen protected, self regulated ,self excited ,Class H insulation Alternator , operating on single phase, 215 volts, rated 0.8 power factor with voltage regulation +/- 1% of make :-LEROY SOMER /STAMFORD/JYOTHI/CROMPTON GREAVES/KIRLOSKAR.

Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with CI/RCC cover having locking/Lifting arrangement and watering pipe etc., the pipe with funnel at top 3.00 mtr long with clamps for holding 25*3 mm GI flat, clamp for test links etc. the pit should be refilled with charcoal or coke and salt as required as per the Earthing Drawing provided by the Engineer-Incharge. The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x 3.0 mtrs(min) and disposal of excavated soil. b) Watering GI pipe, 50mm, Class B, with funnel as per specs. c) Charcoal/salt as per specs. d) Refilling the pit of size 1.0x1.0x 3.0 mtrs(min) with soft black agriculture soil of minimum resistivity i/c transportation/carriage for 3.00 kms. e)Masonary chamber with proper foundation, cover plate and locking arrangement. f) Testing of earth value with earth megger and certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g) watering arrangement

Supplying and fixing of Air termination rods of 1.50 m height fixed to the metallic base clamp with all accessories as per the specifications and direction of Engineer in charge.

Supplying and fixing of G.I. wires as per the specifications for flexible connections.

Supplying and laying of GI flat 25 mm x 3 mm for down conductors and earthing as specified and as directed by Engineer in charge.

Supplying and laying of GI flat 40 mm x 6 mm for Grid (mesh protection) on roof tops as per the specifications and drawings supplied by Engineer in charge.

Supply and fixing Flat strip holders with suitable slot with all fixtures as specified.

Supplying and fixing Disconnecting / Testing links as specified including supplying of UPVC box and its connections, fixtures etc. as per the specifications including all accessories.

Supply and fixing Flexible Braided links as specified.

Testing of the entire Lightning protection system confirming to codes of BIS 2309 and BIS 3043.

Rates quoted by Contractor for each item should be inclusive of GST

Alcon Construction (Goa) Pvt. Ltd.