Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.9 LAdmitted-Finance | ₹47.9 L | L1 | Admitted-Finance |
| 2 | L2₹48.4 LAdmitted-Finance 50A 7B 5C UMARPUR NIWA DHOOMANGANJ PRAYAGRAJ UP | PRAYAGRAJ | UTTAR PRADESH | 211011 | ₹48.4 L | L2 | Admitted-Finance |
| 3 | L3₹48.8 LAdmitted-Finance | ₹48.8 L | L3 | Admitted-Finance |
| 4 | L4₹49.4 LAdmitted-Finance | ₹49.4 L | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | SS CONSTRUCTION L2 | DIAMOND SALES COROPORATION L4 | KIRT ENTERPRISES L3 | MODERN ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling the electric induction motor AC 3 Phase, capacity up to 5HP, 440 V, 1440 RPM, 50Cycle of any make and type from the foundation and pump after disconnecting electric cable connection and earthing etc. and transportation to civil workshop for repair/rewinding, strip opening the motor and removing of defective burnt winding, rewinding the motor after cleaning the rotor and starter with super enameled copper winding wire of suitable turn and gauge as per the original with proper insulation including varnishing, providing all high grade material and class ‘B’ varnish for insulation, reassembling the complete motor and re-fixing at site with electric cable connection, earthing and testing the motor on full load at site after coupling the pump for its serviceability up to entire satisfaction of Engineer-in-charge.
Note :- (i) Super enameled copper winding wire shall be measured and paid separately under appropriate item of this BOQ in supply only.
(ii) Ball bearing if replaced shall be measured and paid separately under appropriate item of this BOQ in supply only.
(iii) The T & P/vehicles shall be arranged by the contractor and the cost deemed to be included in the quoted rates. | 14 | Each Job | 2,500 ₹35,000 | 7,000 ₹98,000 | 6,500 ₹91,000 | 3,000 ₹42,000 |
| 2.00 | All as per srl item No. 1 here-in-before but electric motor of capacity 7.5 HP to 15 HP complete all as specified and as directed by Engineer-in-charge | 19 | Each Job | 3,500 ₹66,500 | 7,500 ₹1.4 L | 8,500 ₹1.6 L | 5,000 ₹95,000 |
| 3.00 | All as per srl item No. 1 here-in-before but electric motor of capacity 20 HP to 25 HP complete all as specified and as directed by Engineer-in-charge | 16 | Each Job | 5,000 ₹80,000 | 11,000 ₹1.8 L | 12,000 ₹1.9 L | 5,500 ₹88,000 |
| 4.00 | All as per srl item No. 1 here-in-before but electric motor of capacity 40 HP to 100 HP complete all as specified and as directed by Engineer-in-charge | 3 | Each Job | 6,000 ₹18,000 | 14,000 ₹42,000 | 15,000 ₹45,000 | 9,000 ₹27,000 |
| 5.00 | Disconnecting the pumping sets of capacity up to 5 HP any make and model from motor and all water connections and removing/taking up from foundation, taking to civil workshop for repair/strip opening and repairing of pumping sets by changing the defective/unserviceable parts such as bearing, shaft, impeller, bush, Gland plate etc. complete. Reassembling including oiling, greasing replacement of worn out nuts, bolts, gasket, glands etc and re-fixing in its original position at site, making all connections, commissioning and testing etc complete all as specified and as directed by Engineer-in-Charge. Note :- (i). Ball bearing, shaft, impeller, bush, Gland plate & stuffing box packing etc replaced as per requirement shall be measured and paid separately under appropriate item of this BOQ in supply only.
(ii) The rates for minor repair, all other minor items essential for functioning of pump are deemed to be included in the quoted rates.
(iii) The T & P/vehicles will be arranged by the contractor and the cost deemed to be included in the quoted rates. | 8 | Each Job | 2,000 ₹16,000 | 7,000 ₹56,000 | 6,000 ₹48,000 | 3,000 ₹24,000 |
| 6.00 | All as per srl item No. 5 here-in-before but pumping sets of capacity 7.5 HP to 15 HP complete all as specified and as directed by Engineer-in-charge. | 10 | Each Job | 3,000 ₹30,000 | 9,500 ₹95,000 | 9,000 ₹90,000 | 5,000 ₹50,000 |
| 7.00 | All as per srl item No. 5 here-in-before but pumping set of capacity 20 HP to 25 HP complete all as specified and as directed by Engineer-in-charge | 12 | Each Job | 5,000 ₹60,000 | 12,500 ₹1.5 L | 12,000 ₹1.4 L | 5,500 ₹66,000 |
| 8.00 | All as per srl item No. 5 here-in-before but electric motor of capacity 40 HP to 100 HP complete all as specified and as directed by Engineer-in-charge | 6 | Each Job | 5,500 ₹33,000 | 14,000 ₹84,000 | 14,000 ₹84,000 | 9,000 ₹54,000 |
| 9.00 | Lifting the defective submersible pumping set of capacity up to 5 HP, complete after disconnecting electric cable connection and transportating to civil workshop if required for rewinding reassembling the complete submersible pumping set proper insulation including varnishing, providing all high grade material and class ‘B’ varnish for insulation and carrying out the repairs of pump like replacement of bushes and other minor reapirs and reassembling the complete submersible motor pump, lowering including reconnecting the electric cable connection and testing complete all as directed by Engineer-in-Charge.
Note :- (i) The rates for minor repair, jointing and jointing materials are deemed to be included in the quoted rates
(ii) The T & P/vehicles will be arranged by the contractor and the cost deemed to be included in the quoted rates.
(iii) Super enameled copper winding wire shall be measured and paid separately under appropriate item of this BOQ in supply only. | 19 | Each Job | 2,500 ₹47,500 | 7,500 ₹1.4 L | 6,000 ₹1.1 L | 3,000 ₹57,000 |
| 10.00 | All as per srl item No. 9 here-in-before but submersible pumping set capacity 7.5/10 HP complete all as specified and as directed by Engineer-in-charge | 12 | Each Job | 3,000 ₹36,000 | 8,000 ₹96,000 | 7,000 ₹84,000 | 4,000 ₹48,000 |
Updated dates
Tender Value
₹49.9 L
EMD Value
₹99,800
Closing Date
18 May 2026, 6:00 pmClosed
Vipin Chandra Rai
GE UTILITY BATHINDA
REPAIR MAINT OF STP AND SEWAGE PUMP HOUSE AT NORTH AND SOUTH CAMPUS UNDER GE(UTILITY ) BATHINDA AT Bathinda Mil Stn.
2026_MES_760392_1
8945/2026-27/E8
Open Tender
Miscellaneous Works
270 days
Garrison Engineer Utility Bathinda
as per NIT
9 documents required · 9 mandatory
₹500
Yes
GE Utility Bathinda
₹99,800
Yes
20 May 2026
15 Apr 2026
20 May 2026
15 Apr 2026
18 May 2026
4 May 2026
All as per srl item No. 1 here-in-before but electric motor of capacity 7.5 HP to 15 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 1 here-in-before but electric motor of capacity 20 HP to 25 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 1 here-in-before but electric motor of capacity 40 HP to 100 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 5 here-in-before but pumping sets of capacity 7.5 HP to 15 HP complete all as specified and as directed by Engineer-in-charge.
All as per srl item No. 5 here-in-before but pumping set of capacity 20 HP to 25 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 5 here-in-before but electric motor of capacity 40 HP to 100 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 9 here-in-before but submersible pumping set capacity 7.5/10 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 9 here-in-before but submersible pumping set capacity 20 HP complete all as specified and as directed by Engineer-in-charge
All as per srl item No. 9 here-in-before but submersible pumping set capacity 60 HP complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6305 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6306 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6307 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6308 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6309 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6311 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6313 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6206 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement ball bearing No. 6205 for electric motor/ pump complete all as specified and as directed by Engineer-in-charge
Supply only in replacement steel distance pieces suitable for 5 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement steel distance pieces suitable for 7.5 HP to 15 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement steel distance pieces suitable for 20 HP to 25 HP pumping set any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement steel distance pieces suitable for up to 40 to 100 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement gland plate studs/ eye bolt suitable for 5 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement gland plate studs/ eye bolt suitable for 7.5 HP to 15 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement gland plate studs/ eye bolt suitable for 20 HP to 25 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement gland plate studs/ eye bolt suitable for 40 to 100 HP pumping set of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement carbon steel shaft high tensile strength with key suitable for pump set of capacity 5 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement carbon steel shaft high tensile strength with key suitable for pump set of capacity 7.5 HP to 15 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement carbon steel shaft high tensile strength with key suitable for pump set of capacity 20 HP to 25 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement carbon steel shaft high tensile strength with key suitable for pump set of capacity 40 to 100 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement cast iron impeller suitable for pump set of capacity 5 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement cast iron impeller suitable for pump set of capacity 7.5 HP to 15 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement cast iron impeller suitable for pump set of capacity 20 HP to 25 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement cast iron impeller suitable for pump set of capacity 40 to 100 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement brass/gun metal bush DE & NDE suitable for pump set of capacity 7.5 HP to 15 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement brass/gun metal bush DE & NDE suitable for pump set of capacity 20 HP to 25 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only in replacement brass/gun metal bush DE & NDE suitable for pump set of capacity 40 to 100 HP of any make complete all as specified and as directed by Engineer-in-charge.
Supply only super enameled copper winding wire for rewinding the electric motors as per existing grade and size complete all as specified and as directed by Engineer-in-charge. . Note :- Labour for motor winding shall be measured and paid separately under appropriate item of this BOQ
Supply and fixing in replacement flexible spare tyre coupling as per size including alignment of pump and motor complete all as specified and as directed by Engr-in-charge.
Dismantling the air blower of any capacity, 1440RPM, reciprocating type from the foundation and drain of comressor oil carefully and disconnecting electric motor connection and earthing etc and transportation to civil workshop for repair, opening the air blower and removing of defective piston rings, bearings and cleaning of piston and boring of cylinder if required and reassembling the complete air blower after replacement of bearing and piston rings and comressor oil and re-fixing at site and reassebmling with electric motor, earthing and testing the air blower on full load at site up to entire satisfaction of Engineer-in-charge.
M&L for blower belts of any size (as per site requirement) for Air Blower electric motor complete all as directed.
M&L for oil imeressed graphite gland packing off sizes of superior quality.
M&L for air compressor oil for air blower complete all as directed.
Supply and adding chlorine dioxide powder (SCS 10K) chemical for treatment of raw sewage treated water complete all as directed.
Testing of Raw Sewage Water (Inlet) parameters like BOD, COD, TSS, FC, pH, Total N, from Government approved Lab including proper collection sample in presence of all concerned. The transportation charges and all other expenses are deemed to be included in this rate. No extra charges are given to the bidder.
Testing of Treated Sewage Water (outlet) parameters like BOD, COD, TSS, FC, pH, Total N, from Government approved Lab including proper collection sample in presence of all concerned. The transportation charges and all other expenses are deemed to be included in this rate. No extra charges are given to the bidder.
Supply and fixing in repair Cast Iron butterfly valves of size 40/50 mm dia ISI marked PN 1.6 complete all as directed.
Supply and fixing in repair Cast Iron butterfly valves of size 80 mm dia ISI marked PN 1.6 complete all as directed.
Supply and fixing in repair Cast Iron butterfly valves of size 100 mm dia ISI marked PN 1.6 complete all as directed.
Supply and fixing in repair Cast Iron butterfly valves of size 150 mm dia ISI marked PN 1.6 complete all as directed.
Supply and fixing in repair Cast Iron butterfly valves of size 200 mm dia ISI marked PN 1.6 complete all as directed.
Supply and fixing in repair 80 mm dia flanged sluice valve , ISI marked PN 1.0 confirming to IS both end flanged ,drilled , steel spindle and with iron wheel handle , CI gate with MS ring including jointing material such as nuts, bolts, washers and rubber sheet complete all directed.
All as per serial item No. 55 above but for 100 mm dia sluice valve.
All as per serial item No. 55 above but for 150 mm dia sluice valve.
All as per serial item No. 55 above but for 200 mm dia sluice valve.
S&F in repair 100 mm dia NRV, ISI marked PN 1.6 both end flanged ,drilled, including jointing material such as nuts, bolts, washers and rubber sheet etc complete all as directed.
All as per serial item No. 59 above but for 150 mm dia NRV.
S&F in Ductile Iron Dual Plate Wafer Type Check Valve, PN 16 for size 65mm ISI marked including jointing material such as nuts, bolts, washers and rubber sheet etc complete all as directed.
All as per serial item No. 61 above but for 80 mm dia Ductile Iron Dual Plate Wafer Type Check Valve.
All as per serial item No. 61 above but for 100 mm dia Ductile Iron Dual Plate Wafer Type Check Valve.
M&L for earthing complete with galvanized iron of steel or earth plate Each electrode of size 600mm x 600mm x 6mm thick buried directly in ground. Vertically total depth not less than 2.25 mtr below normal ground level with top edge of earth plate at depth of not less than 1.5 mtr below ground level surounded from all sides with alternate layers of charcoal and common salt and connected to GI earth strip 25mm x 4 mm thick by means of GI bolts, nuts washers & check nuts and soldering the strip, electrode connected to panel board or on poles or on transformer (including making of test point with GI strip of size 25mm x 4 mm) including GI protection pipe 40 mm light grade dia for protection of strip upto test point all as directed GI pipe medium grade 20 mm bore for watering including providing funnel and wire mesh CI frame and 10 cm thick suitably reinforced RCC pit cover PCC chamber pit with PCC 1:3:6 type C2 using 40 mm graded stone aggregates complete including excavation and earth work, all as specified and PCC pit shall be provided at least 50 cm away from the earth pit and not just on earth pit including testing on completion.
Supply and fixing DI Special fittings 80 to 100 mm dia (any type, radius and angle) like collar, bends, tee, tail piece caps and pugs, single branch ‘Y’ junction, double branch, cross, spigot & socket or taper and flanged, straight bend, increasing decreasing or double socket, reducer etc. all as per requires at site complete all as specified and as directed by Engineer-in-charge.
Supplying, jointing and testing of GI steel water tubing 80 mm bore ISI marked heavy grade galvanised including flanged ended & including tube fittings Viz Tees, Socket bends elbows, union nipple etc screwed and socketed joint including taking out existing pipe from sumpwell complete all as specified and directed.
S&F in replacement power contactor 3TF 50 415 V etc including internal wiring in panel complete all as specified and directed .
S&F in replacement power contactor 3TF 49 415 V etc including internal wiring in panel complete all as specified and directed .
S&F in replacement power contactor 3TF 48 415 V etc including internal wiring in panel complete all as specified and directed .
S&F in replacement power contactor 3TF 47 415 V etc including internal wiring in panel complete all as specified and directed .
S&F in replacement power contactor 3TF 45 415 V etc including internal wiring in panel complete all as specified and directed .
S&F in replacement Bimettalic relay amp range (70-95A) etc including internal wiring in panel complete all as specified and directed .
S&F in replacement Bimettalic relay amp range (32-50A) etc including internal wiring in panel complete all as specified and directed .
S&F in replacement Bimettalic relay amp range (20-32A) etc including internal wiring in panel complete all as specified and directed .
Supply and fixing in replacement Electronic timer 230-440V etc complete all as specified and directed.
Supply and fixing in replacement single phase preventer 230-440V etc complete all as specified and directed.
S&F in replacement MCCB, 3/4 pole, 250 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 3/4 pole, 200 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 3/4 pole, 160 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 3/4 pole, 125 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
S&F in replacement MCCB, 3/4 pole, 100 Amps, 415 volt, 50 cycles, breaking capacity 36 KA, thermal magnetic release with two set of copper spreader links complete all as specified.
Supply and fixing in repair relay range upto 25Amp suitable for upto 7.5HP starter (Dol/Star delta) complete all as directed.
Supply and fixing in repair relay range above 25Amp suitable for above 12.5 HP to 25HP starter(Dol/Star delta) complete all as directed.
Supply and fixing in repair Contactors 415 volts, 50 cycles, 3 phase, MNX-A1 or MNX A2 (as per site requirement) complete all as directed.
Supply and fixing in repair power Contactors 415 volts, 50 cycles, 3 phase, MNX-18 or MNX 25 (as per site requirement) complete all as directed.
Supply and fixing in repair MCB Sizes 32A/63A , 3Pole/4Pole ( as per site requirement), 415 Volts, 50 cycle complete all as directed.
Material and labour for rectifying the electrical fault of electric motor and LT panels at various sewage pump house and STPs including replacement of copper lugs ,cleaning of LT panel , servicing of power contactors ,and LT panel including copper and alluminium lugs replacement ,rewiring of burnt wiring , servicing of star delta starter as directed .
Material and labour for detecting and repairing water leakage from the exising uPVC pipe line of size 250/200 mm bore including supply and fixing new PVC fittings of require size & new CI/ DI Joint, including necessay excavation earth work and bailing out stagnated / muddy water etc complete all as directed.
All as per serial item No. 89 above but for pipe line of size 110mm/160mm bore.
All as per serial item No. 89 above but for pipe line of size 75/50mm bore.
All as per serial item No. 89 above but for pipe line 20/25 mm bore. Note for serial item No.89 to 92. (i) Contractor shall depute Labour / Pipe Fitter and other require equipments such as JCB / Tractor and Fuel etc. to attend the leakage / complaint on daily basis as per complaints are traced out . (ii) Complete site for attending the leakage shall not be handed over to contractor at a time. Site of leakage only be handed over to the contractor on site requirement basis. (iii) Contractor / Supervisor shall collect complaint of leakage from concerned JE as daily basis and shall complete the complaint on the same day. (iv) If leakage again found during the currency period of contract at the repaired location, contractor shall repair again without any extra cost in terms of condition 46 of IAFW-2249 of General condtion of contracts. (v) Contractor shall provide equipments like JCB / tractor etc. and fuel at his own cost and arrangement for rectifying the complaint as per site requirement and nothing extra shall be paid on this account. (vi) The cost of Excavation & earth work is included in this item nothing extra shall be paid on this account. (vii)The cost of new PVC fittings along with necessary new CI/ DI Joint of required size are included in this item and nothing extra shall be paid on this account.(viii) Old pipe fittings shall not used in this item.
Please Enable Macros to View BoQ information
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.40 MB
8945tender.pdf
Tender Documents • 0.76 MB
BOQ_851723.xls
BOQ • 0.44 MB
Download all tender documents and submit your bid