Construction of Pashu Chikitsalaya, Barhi , Block Barhi , Distt- Hazaribag

Amount

Earth work in excavation in foundation trenches in ordinary soil (vide classification of soil item-A) and disposal of excavated earth as obtained to a distance upto 50 M. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification and direction of E/l.

Earth filling in foundation trenches and plinth in layers not exceeding 150 mm. thick well watered, rammed, fully compacted and fine dressed with earth obtained from excavation of foundation frenches within a lead of 50 M. and lift of 1.5 M all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including' cost of all materials, labour, royalty and taxes all complete as per building specification and direction of E/l (Mode of measurement compacted volume).

Providing designation 75 B one brick flat soling joints filled with local sand including cost of watering taxes royalty all complete as per building specification and direction of E/l.

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering-All work up to plinthlevel 1:2:4(1 cement:2 coarse sand(zone III):4 Gradestone aggregate 20 mm nominal size)

providing and Laying in position specified grade of reinforced cement concrete excluding the cost of centering shuttering and finishing-All work up to plinthlevel 1:1.5:3(1 cement:1.5 coarse sand(zone III):3 Gradestone aggregate 20 mm nominal size)

Foundation ,footings,bases of column .etc for mass concrete Centering and shuttering including strutting proping etc .and removal of form for

Providing designation 75 B brick work in C.M. (1:6) in foundation and plinth with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10 mm thick mortar joints, cost of screening materials, raking out joints to 15 mm depth, curing, taxes and royalty all complete as per building specification and direction of E/l.

Providing designation 75 B brick work in C.M (1:6) in superstructure with approved quality of clean coarse sand of F.M 2 to 2.5 including providing 10 mm thick mortar joints cost of screening materials , scaffolding , raking out joints to 15mm depth curing, taxes and royalty all complete as per building specification and direction of E/l.

Reinforced cement concrete work in beams ,suspended floors,roofs having slope up to 15 degree landing,balconies,shelves,chajjas,lintels,bands,plain wndows ills,staircase and spiralstair case above floor five level, excluding the cost of centering , shuttering, finishing,and reinforcement with- :1:1.5:3(1 cement:1.5 coarse sand(zone III):3 Gradestone aggregate 20 mm nominal size)

Centering and shuttering including strutting proping etc .and removal of form for Lintels,beams,plinth beams ,girders,bressumers and cantilever

Centering and shuttering including strutting proping etc .and removal of form for suspended floors,roofs,landings,balconies and access platform

Reinforced cement concrete work in walls(any thickness) , including attached pillar, buttresses ,plinth and string courses, fillets.columns.pillers.piers,abutments, posts and struts etc above floor five level, excluding the cost of centering , shuttering, finishing,and reinforcement with- :1:1.5:3(1 cement:1.5 coarse sand(zone III):3 Gradestone aggregate 20 mm nominal size)

Centering and shuttering including strutting proping etc .and removal of form for Columns,pillars,piers,Abutments,post,and Struts

Providing and fixing pressed steel door frames conforming to IS: 4351,manufactured from commercial mild steel sheet of 1.60 mm thickness,including hinges, jamb, lock jamb, bead and if required angle threshold ofmild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressedmild steel welded or rigidly fixed together by mechanical means, includingM.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strikeplateand shock absorbers as specified and applying a coat of approved steelprimer after pre-treatment of the surface as directed by Engineerin-charge: Profile B - Fixing with adjustable lugs with split end tail to each jamb

Supplying, fitting and fixing 35 mm thick solid core type non-decorative single leaf flush shutters in doors and windows with black board core blended with high quality phenol formal dehyde synthetic resin both side commercial veneered of standard make with oxidised iron fittings such as hinges, tower bolts, handle, cleats and sand blocks and taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing fully glazed steel door, windows or ventilations of standard rolled 'Z' and mullion steel sections and size as per IS-1038 joints met and welded with 100x16x3mm M.S. lugs fixed in cement concrete (1:2:4) blocks 15x10x10 cm size including cost of oxidised iron fittings, with hinges, handle per steps, catch springs, 3mm thick plain glass panes with Aluminimum beads and inner frame fixed with lugs with 20mm long 6.3mm G.I. counter sunk machine screw and nuts and applying a coat of red lead paint carriage to work site hoisting and placing in position in all storys and taxes all complete as per building specification and direction of E/l.

Supplying, fitting and fixing M.S. grill made of 20x6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth , carriage of grill to work site, hoisting as per building specification and direction of E/l. (where materials is not supplied by the deptt.)

Providing 12 mm thick water proof cement plaster (1:3) with clean coarse sand of F.M. 1.5 with 5% cico or any other approved water proofing compound including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 12mm cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing 6 mm thick cement plaster (1:4) in ceiling with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty wherever required, scaffolding, washing of floors and taxes all complete as per building specification and direction of E/l.

Finishing walls with Acrylic Smooth exterior paint of required shade : ( New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Providing two coats of synthetic enamel paint over a coat of primer of approved shade and make over new wooden surface after cleaning, removing dirt, scales, smokes, grease and sand papering, including cost of scaffolding and taxes all complete as per building specification and direction of E/l.

Providing two coats of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/l.

Providing and fixing fan hook of 16mm dia M.S. bar 1 metre long bent to required size and shape, placed in position and fixed in R.C.C. slab/beam at the time of casting all complete as per building specification and direction of E/l. (where material is not supplied by deptt.)

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete

Providing and laying 6mm thick pre-cast white glazed tiles in walls over 12mm thick cement plaster with complete job With glazed ”A” grade white 15 cm x 15 cm x 6 mm thick tiles with complete job

Providing 25 mm thick first class patent stone flooring (1:2:4) with stone chips in two layers, bottom layer 19 mm thick (1:2:4) with 12 mm to 6 mm size graded stone chips and top layer 6 mm thick (1:2) with 6 mm down stone chips, in panels including cost of curing, finishing the surface smooth by rubbing with carborandum stone, taxes and royalty with all complete as per building specification and direction of E/l.

Providing tor steel reinforcement of 8mm to 20 mm dia. rods as per approved design and drawing excluding carriage of M.S. bars to work site , cutting, bending and binding with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/l. 8 mm dia

10 mm dia

12 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including testing of joints complete as per direction of Engineer in Charge.Concealed work,including cutting chases and making good the walls etc 15 mm nominal

20 mm nominal

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. 25 mm nominal

Making holes in walls for laying G.I. pipes and restoring the same after pipe laying with complete job 250 mm thick wall

Providing and fixing Gun metal full way valve of approved quality with complete job 25 mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing male ended 15mm dia brass bib cock with complete job

Providing and fixing 15 mm size C.P. brass pillor cock C.I. body brass spindle pillor cock with complete job(C.I. Body brass spindle)

Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of Parry or Hindustan or any other with complete job

Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other with complete job 580 mm long with 12.50 liter low level PVC Cistern

Supplying fitting and fixing the following items complete with all with complete job Soap Dish

Mirror (450 x 300 mm)

Towel rail

Glass Shelves

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,110 mm diameter

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Bend 87.5°110 mm bend

Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.Shoe (Plain)110 mm Shoe

Providing and fixing unplasticised -PVC pipe clips of approved designto unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. crews of required length,including cutting brick work and fixing in cement mortar 1:4 (1 cement: 4 coarse sand) and making good the wall etc. complete.

Providing and laying in position cement of specified grade excluding the cost of centering and shuttering-All work up to plinthlevel :1:3:6(1 cement:3 coarse sand(zone III):6 Gradestone aggregate 40 mm nominal size)

Providing 12mm cement plaster (1:3) with 1.5 mm cement punning with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding taxes and royalty all complete as per building specification and direction of E/l.

Supplying materials and labour for construction inspection chamber with complete job with complete job

Supplying 150 mm dia NP2 RCC hume pipe with coller with Labour for fitting , fixing NP2 RCC Hume Pipe with complete job complete job (150mm dia)

Making Soak pit 2.50 m diameter 3.0 meter deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter 1.8 meter long with complete job

Wiring for light point / exhaust fan point / call bell point with 1.5 sq .mm FRPVC insulated copper conductor single core cable in surface / recessed PVC Conduct, with piano type switch, phenolic laminated sheet, suitable size PVC/G.l. box etx. As

Wiring for light/ power plug with 2x4 sq.mm FR PVC insulated copper cinductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required.

S/F Modullar type switch / socket :- Supplying and fixing following modular type switch / socket on the existing modular plate and switch box including connections as required. 5/6 amps , 3 pin socket outlet

Circuit / submain Wiring in PVC conduit :- Wiring for Circuit / submain wiring along with the following size PVC / insulated copper conductor single core cable in surface/recessed PVC conductor single core cable for loop earthing as required. 2x2.5 sq mm+1x2.5 sq mm earth wire

2x6.0 sq mm+1x6.0 sq mm earth wire

S/F Modullar type electronic fan regulator :- Supplying and fixing stepped type electronic fan regulatar on the existing modular plate and switch box including connections as required.

S/F power plug point with Piano type accessories :- Supplying and fixing suitable size G.I /PVC box surface or in recess with phenolic liminated sheet cover in front including provideng and fixing 6 pin 15/16 amps socket out let and 15/16 amps piano type switch in connection painting etc as required.

S/F Ceilling rose Supplying and fixing 3 pin 5ams Ceilling rose on the existing junction box/ wooen including connection etc as required.

S/F batten holder Supplying and fixing batten /angle holder including connection etc as require

Supply Installtion, testing and commissioning of follwing size ceiling fan 3 Blades confirming to IS: 374: 2019 Including wiring the down rods of standard length (up to 30 cm) with 1.5 sq.mm.FR PVC Insulated copper wire suitable for 230 v 50Hz ,single phase supply etc complete as required 1200 mm (48") Ceiling fan

ITC ceilling fan :- Installation testing and commissioning of of Ceilling fan including wiring the down rods of standard length (upto 30 cm ) with 1.5sq mm FR PVC insulated copper conductor single core cable etc.as required.

S/F S.P.MCB DB :- Supplying & fixing following way single pole neutral sheet MCB distriution board 240 volts on surface / recess complete with tinned copper busbar neutral busbar earth bar din bar detachable gland plate interconnection phosphatized powder painted with complete job 6 Way Single door

S/F "B" series, S.P MCB :- Supplying & fixing 6amps to 32 amps rating 240 volts "B" series miniature circuit breaker suitable for lighting and other loads of folloing poles in the existing MCBDBcomplete with connectiontesting and commissioning etc. 6/32 amps, single pole,"B" series

S/F DPMCB isolator :- Supplying & fixing following rating double pole 240 volts in the existing MCBDB complete with connection testing and commissioning etc.(40 amps)

S/F rewireable pole / TP&N switch disconnector :- Providing and fixing following capacity double pole / TP/N sheet matal switch disconnector fuse unit in existing metal board with rewireable type fuses, including drilling holes in matel board making connection etc. 32 amps , double pole

MV cable laying upto 25 sq. mm in ground :- Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size not exceeding 25 sq. mm direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

G.I. Earth pipe eletrode with salt / charcoal :- Earthing with G.I. earth pipe 4.5 mtr long 40mm dia including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal and salt as required.

S/L 8 SWG Copper wire in ground :- supplying and fixing 8SWG copper wire at 0.50 mtr below ground level for conductor earth electrode including soldering etc as required.

10/12 W LED Tube light

LED Street light (90/100 W)

15/16 Watt LED Bulb

Carriage of Materials (A) Bricks lead 15 KM

(B) Bricks lead 30 KM

(C) Sand av lead 10 KM

(D) Sand av lead 30 KM

(E) Stone Chips lead 15km

(F) Stone Chips lead 15km

(G) Metal Lead 15 KM

Add GST 18 %

Add L.Cess 1 %

GAJAVAKRA ENTERPRISES (BID ID -644486)